hello Adam...
* Adam Done <mlist@donestudios.com> [2004-12-02 09:24 +0100]:
> I have a firewire drive working great on my system but now I have
> installed a firewire Lacie external CD burner and I see that Linux
> recognize it when I dmsg.
>
> PCI: Enabling device 0001:11:03.0 (0004 -> 0005)
> ieee1394: Initialized config rom entry `ip1394'
> ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
> PCI: Enabling device 0001:11:0a.0 (0010 -> 0012)
> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[63]
> MMIO=[80080000-800807ff] Max Packet=[2048]
> ieee1394: Node added: ID:BUS[0-00:1023] GUID[00d04b01070340de]
> ieee1394: Node added: ID:BUS[0-01:1023] GUID[00d001010000a2fd]
> ieee1394: Host added: ID:BUS[0-03:1023] GUID[000a27fffeda4b94]
> SCSI subsystem initialized
> sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
> scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
> ieee1394: sbp2: Node 0-00:1023: Using 36byte inquiry workaround
> ieee1394: sbp2: Logged into SBP-2 device
> ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
> Vendor: LACIE Model: CDBP-241040A Rev: 6.34
> Type: CD-ROM ANSI SCSI revision:
> 02
> scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices
> sr0: scsi3-mmc drive: 16x/40x writer cd/rw xa/form2 cdda tray
^^^
here it is.
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> ieee1394: sbp2: Logged into SBP-2 device
> ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
> Vendor: FireWire Model: 1394 Disk Drive Rev:
> Type: Direct-Access ANSI SCSI revision:
> 02
> SCSI device sda: 11733120 512-byte hdwr sectors (6007 MB)
> sda: cache data unavailable
> sda: assuming drive cache: write through
> sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
> Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
> PHY ID: 406212, addr: 0
>
>
>
> I also looked at /proc/scsi/scsi:
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: LACIE Model: CDBP-241040A Rev: 6.34
> Type: CD-ROM ANSI SCSI revision:
> 02
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
> Vendor: FireWire Model: 1394 Disk Drive Rev:
> Type: Direct-Access ANSI SCSI revision:
> 02
>
>
>
> What I can't figure out is what sd device the cdrw is located at. Dmesg
> tells me it is there. Has anyone else have any light on this subject.
> Thanks in advance.
have you tried /dev/sr0 for accessing the device?
hth,
Sebastian
--
::: .O.
::: ..O
::: OOO
::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import
Attachment:
signature.asc
Description: Digital signature