Re: B50 woes (was: potato chrp ISO?)
Krisztian Mark Szentes said:
> I try to use the rescue image:
>
> 0 > boot floppy:\linux.bin load_ramdisk=1 root=/dev/ram video=keep
> chrpboot starting: loaded at 0x400000
> avail_ram = 4e5000
> gunzipping (0x10000 <- 0x415cb8:0x4e3194)...done
> 1934704
> bytes
> start address = 0x10000
> instantiating rtas...rtas at 00565000
> done
> copying OF device tree...done
> booting...
>
> the LCD blanks out and nothing happens any more. Not even the reset
> button reboots the B50.
> I access the machine over the serial console as there is no video card
> installed. I guess the video=keep would tell the kernel not to change to
> the (nonexistent) video framebuffer.
>
> What's wrong with the kernel? Should I compile one with just serial
> support and the correct command line (ramdisk etc.)
I'm not 100% sure if this is required but perhaps you could try adding
the "console=ttyS0" (assuming you are using tty1) parameter to the
boot command line.
Cheers,
Leigh.
Reply to: