Re: X Crash after installing msttcorefonts, cabextract, x-ttcidfont-conf
I installed these fonts by hand (because ttcidfont IMO
is a piece of crap) with woody's default X server
(4.1.0.1?) and it worked. I think you may need to
change the case of your font filenames to lower.
--- Wolfgang Pfeiffer <pfei@gmx.net> wrote:
> Hi all,
>
> This is what I have:
>
> Titanium IV
>
> ii x-window-syste 4.2.1-6 X Window System
> core components
> ii x-window-syste 4.2.1-6 X Window System
> ii drm-trunk-modu 2003.05.04-1 Source for the DRI
> CVS trunk DRM modules
> ii xserver-xfree8 2002.12.05-4 The DRI CVS trunk
> XFree86 X server
> ii xlibmesa3-dri- 2002.12.05-4 DRI CVS trunk
> version of Mesa 3D graphics li
> ii msttcorefonts 1.1.2 Installer for
> Microsoft TrueType core fonts
> ii cabextract 0.5-1 a program to
> extract Microsoft Cabinet files
> ii x-ttcidfont-co 13 Configure TrueType
> and CID fonts for X.
>
>
> After installing msttcorefonts, cabextract and
> x-ttcidfont-conf yesterday,
> the X server is crashing after running xfontsel.
>
> And it seems it doesn't matter whether I choose
> "xtt" or "freetype" when
> configuring x-ttcidfont-conf: the X server is either
> crashing in both
> cases. Or, if the server does not crash, xfontsel
> crashes, rendering it
> unusable.
>
> Lines similar to the following ones in
> /var/log/XFree86.0.log seem to be
> typical when trying to run xfontsel and choosing
> microsoft fonts:
>
> FreeType: couldn't open face
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/ai
> =0.4:Trebuchet_MS_Bold.ttf: 1
> FreeType: couldn't open face
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/ai
> =0.4:Arial_Bold_Italic.ttf: 1
> FreeType: couldn't open face
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/ai
> =0.4:Arial_Bold_Italic.ttf: 1
> FreeType: couldn't open face
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/ai
> =0.4:Arial_Bold_Italic.ttf: 1
>
>
> My last /var/log/XFree86.0.log:
>
>
>
--------------------------------------------------------
>
> This is a pre-release version of XFree86, and is not
> supported in any
> way. Bugs may be reported to XFree86@XFree86.Org
> and patches submitted
> to fixes@XFree86.Org. Before reporting bugs in
> pre-release versions,
> please check the latest version in the XFree86 CVS
> repository
> (http://www.XFree86.Org/cvs)
>
> XFree86 Version 4.2.99.2 (DRI trunk) / X Window
> System
> (protocol Version 11, revision 0, vendor release
> 6600)
> Release Date: 21 October 2002
> If the server is older than 6-12 months, or if your
> card is
> newer than the above date, look for a newer version
> before
> reporting problems. (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.20-ben1-xfs-ck ppc
> [ELF]
> Module Loader present
> Markers: (--) probed, (**) from config file, (==)
> default setting,
> (++) from command line, (!!) notice, (II)
> informational,
> (WW) warning, (EE) error, (NI) not
> implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Wed
> Aug 20 15:38:57 2003
> (==) Using config file: "/etc/X11/XF86Config-4"
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Generic Video Card"
> (**) |-->Input Device "Keyboard0"
> (**) Option "XkbRules" "xfree86-lukas"
> (**) XKB: rules: "xfree86-lukas"
> (**) Option "XkbModel" "ibook2"
> (**) XKB: model: "ibook2"
> (**) Option "XkbLayout" "de"
> (**) XKB: layout: "de"
> (**) Option "XkbVariant" "nodeadkeys"
> (**) XKB: variant: "nodeadkeys"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Configured Mouse"
> (WW) The directory "/usr/lib/X11/fonts/CID" does not
> exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/cyrillic"
> does not exist.
> Entry deleted from font path.
> (WW) `fonts.dir' not found (or not valid) in
> "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
> Entry deleted from font path.
> (Run 'mkfontdir' on
> "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").
> (**) FontPath set to
>
"unix/:7100,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to
> "/usr/X11R6/lib/modules-dri-trunk"
> (--) using VT number 7
>
> (II) Open APM successful
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.1
> XFree86 Video Driver: 0.6
> XFree86 XInput driver : 0.3
> XFree86 Server Extension : 0.1
> XFree86 Font Renderer : 0.3
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading
> /usr/X11R6/lib/modules-dri-trunk/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.2.99.2, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading
> /usr/X11R6/lib/modules-dri-trunk/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.2.99.2, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:0b:0: chip 106b,002d card 0000,0000 rev
> 00 class 06,00,00 hdr 00
> (II) PCI: 00:10:0: chip 1002,4c66 card 1002,4c66 rev
> 01 class 03,00,00 hdr 00
> (II) PCI: 10:0b:0: chip 106b,002e card 0000,0000 rev
> 00 class 06,00,00 hdr 00
> (II) PCI: 10:17:0: chip 106b,0022 card 0000,0000 rev
> 03 class ff,00,00 hdr 00
> (II) PCI: 10:18:0: chip 106b,0019 card 0000,0000 rev
> 00 class 0c,03,10 hdr 00
> (II) PCI: 10:19:0: chip 106b,0019 card 0000,0000 rev
> 00 class 0c,03,10 hdr 00
> (II) PCI: 10:1a:0: chip 104c,ac50 card 1000,0000 rev
> 02 class 06,07,00 hdr 02
> (II) PCI: 24:0b:0: chip 106b,002f card 0000,0000 rev
> 00 class 06,00,00 hdr 00
> (II) PCI: 24:0f:0: chip 106b,0021 card 0000,0000 rev
> 01 class 02,00,00 hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:11:0), (0,0,36), BCTRL:
> 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Host-to-PCI bridge:
> (II) Bus 16: bridge is at (16:11:0), (16,16,36),
> BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 16 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 16 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 16 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-CardBus bridge:
> (II) Bus 17: bridge is at (16:26:0), (16,17,20),
> BCTRL: 0x0440 (VGA_EN is cleared)
> (II) Bus 17 I/O range:
> [0] -1 0 0x00001000 - 0x00008fff (0x8000) IX[B]
> (II) Bus 17 non-prefetchable memory range:
> [0] -1 0 0x90000000 - 0x9fffffff (0x10000000) MX[B]
> (II) Host-to-PCI bridge:
> (II) Bus 36: bridge is at (36:11:0), (36,36,36),
> BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 36 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 36 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 36 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (--) PCI:*(0:16:0) ATI Technologies Inc Radeon R250
> Lf
=== message truncated ===
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Reply to: