Mac 7200 (PPC) sees Promise controller.. BUT NO DRIVES
I am having a big problem here.
My nice little "CD burning server", under my bed, is crippled because the
large (40GB) IDE drive in it simply does not detect.
This is a KNOWN WORKING drive. I just pulled it out of a working system.
I've tried compiling IDE Disk Support and the Promise controller driver
(the two necessary modules, of course) as modules, and I've tried
compiling them straight into the kernel. NEITHER WORKS.
When I insert ide-mod and ide-disk, I get:
Apr 11 10:19:28 gandalf kernel: Uniform Multi-Platform E-IDE driver
Revision: 6.31
Apr 11 10:19:28 gandalf kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Apr 11 10:19:28 gandalf kernel: PDC20246: IDE controller on PCI bus 00 dev
70
Apr 11 10:19:28 gandalf kernel: PDC20246: chipset revision 1
Apr 11 10:19:28 gandalf kernel: PDC20246: not 100%% native mode: will
probe irqs later
Apr 11 10:19:28 gandalf kernel: PDC20246: ROM enabled at 0x80810000
Apr 11 10:19:28 gandalf kernel: PDC20246: (U)DMA Burst Bit DISABLED
Primary PCI Mode Secondary PCI Mode.
Apr 11 10:19:28 gandalf kernel: ide2: BM-DMA at 0x0800-0x0807, BIOS
settings: hde:DMA, hdf:DMA
Apr 11 10:19:28 gandalf kernel: ide3: BM-DMA at 0x0808-0x080f, BIOS
settings: hdg:DMA, hdh:DMA
.......however, as you can see, it does not detect the disk itself!
This is very frustrating.
And yes, I have already checked the connections to the disk. They are
fine. :)
Any help?
J e s s i c a L e a h B l a n k
Reply to: