Re: m3mirror doesn't work
On Sun, Mar 24, 2002 at 20:32:17 +0100, Vincent Lefevre wrote:
> I've updated to benh's kernel 2.4.19-pre4-ben0 but m3mirror still
> doesn't work:
>
> ay:/home/lefevre# ./m3mirror lcd:0 crt:1
> ATI Rage M3 mirror tool, v0.1
> error 1074020353 getting mirror value
I've also tried to use "video=ati128fb,crt:1,lcd:0" in the kernel
command line, but this doesn't change anything.
BTW, should I set ati128fb or aty128fb? There doesn't seem to be any
difference in the logs.
The resolution is normally 1152x768 and /var/log/messages says in
particular:
ay kernel: aty128fb: Rage Mobility M3 (AGP) [chip rev 0x0] 8M 128-bit SDR SGRAM (1:1)
ay kernel: Console: switching to colour frame buffer device 144x48
ay kernel: fb0: ATY Rage128 frame buffer device on PCI
But when I try to force the resolution to 1024x768 with
video=aty128fb:1024x768@60,crt:1,lcd:0
the "Console:" line is now:
ay kernel: Console: switching to colour frame buffer device 80x30
and the LCD doesn't support that (I had to switch off). Is it normal?
Why don't I get 128x48 instead? Are my problems with m3mirror are
related to this?
--
Vincent Lefèvre <vincent@vinc17.org> - Web: <http://www.vinc17.org/> - 100%
validated (X)HTML - Acorn Risc PC, Yellow Pig 17, Championnat International
des Jeux Mathématiques et Logiques, TETRHEX, etc.
Work: CR INRIA - computer arithmetic / SPACES project at LORIA
--
To UNSUBSCRIBE, email to debian-powerpc-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: