[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: m3mirror doesn't work - Solved!

On Sun, Mar 24, 2002 at 20:32:17 +0100, Vincent Lefevre wrote:
> I've updated to benh's kernel 2.4.19-pre4-ben0 but m3mirror still
> doesn't work:
> ay:/home/lefevre# ./m3mirror lcd:0 crt:1
> ATI Rage M3 mirror tool, v0.1
> error 1074020353 getting mirror value

The problem was due to benh's kernel configuration (I was told that it
was already configured, but this is clearly not the case!). The things
I changed in the latest configuration:

_ Set Power management support for PowerBooks
_ Set APM emulation
_ Set Backlight control for LCD screens

Looking at the aty128fb source, I found:

static int default_crt_on __initdata = 0;
static int default_lcd_on __initdata = 1;

So, I thought that CONFIG_PMAC_PBOOK was important (it wasn't set),
but I found nowhere how to set it with "make menuconfig", except by
enabling some of the PowerBook features above.

Vincent Lefèvre <vincent@vinc17.org> - Web: <http://www.vinc17.org/> - 100%
validated (X)HTML - Acorn Risc PC, Yellow Pig 17, Championnat International
des Jeux Mathématiques et Logiques, TETRHEX, etc.
Work: CR INRIA - computer arithmetic / SPACES project at LORIA

To UNSUBSCRIBE, email to debian-powerpc-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Reply to: