Re: Quik on Performa 6360 (Powermac 6300/160)
ecoffey@alphalink.com.au writes:
> --- Second-stage QUIK loader boot:
> ata/ATA-Disk@0:7/boot/vmlinux-2.2.19 root=/dev/hda7 Starting at 0 no
> active packageopening display /valkyrie@F1000000DEFAULT CATCH!,
> code=FFF0070
>
> Open Firmware, 2.0 To continue booting the MacOS type: BYE<return> To
> continue booting from the default boot device type: BOOT<return>
> ok 0 > ---
>
> I'm using 'kbd' as the input-device and 'ttya' as the output-device.
> load-base has been set to '100000' in accordance with the collective
> wisdom of the internet, though it makes no difference. The
> boot-device is set to 'ata/ATA-Disk@0:0', and the boot-file is
> 'ata/ATA-Disk@0:7/boot/vmlinux root=/dev/hda7', as recommended by
> http://lppcfom.sourceforge.net/fom-serve/cache/350.html Has anyone
> here had this problem or similar, or know what I might try to fix it?
The error message "DEFAULT CATCH" is what I saw using when enabling
the Cache of my G3 accelerator L2 cache card and trying to boot into
Linux using quik (v2.0), It's now set to boot into Linux using BootX.
hth, Elizabeth
Reply to: