Re: kernels for Loongson 3A

[Andreas Barth <aba@ayous.org>]

* chenhc@lemote.com (chenhc@lemote.com) [130626 02:47]:
> I see that your PMON is *not* from lemote, and I think this is the root
> cause of boot failure. Please use this one, thanks.
> http://dev.lemote.com/files/upload/lm/kernel/testing/pmon-A1004-2.1.3.bin


Booting this ends up with:
 SuperIO RTC
Pull up GPIO15.
NODE 0 MEMORY CONFIG BEGIN

Probing DDR SLOT: 00000000

Set DDR frequency by software

Enable register space of MEMORY
DDR Interleave space open : 0x00000000 - 0x0FFFFFFF
DDR Interleave using Bit 13
DDR Interleave space open : 0x1_1000_0000 - 0x1_FFFF_FFFF
DDR Interleave using Bit 13
Disable register space of MEMORY
Disable cpu buffered read

and stops there. Doesn't seem to be entirly right to me then.

(whereas the output of the other one continues with
 SuperIO RTC

 spd_info_store begain.

 spd_info_store done.
Copy PMON to execute location...
  start = 0x81000000
  s0 = 0x3ec00000
81080000
copy text section done.
Copy PMON to execute location done.
sp=80ffc000
Uncompressing Bios....................................................................OK,Booting Bios
memsz 2032
FREQ   
RTC: 13-07-24 20:10:07
FREI   
cpu fre 900000000
DONE   
DEVI   
init uhci cmd called
ENVI   
MAPV   
in envinit
)


Any hints for me?



Regards,
Andi