Re: cobalt qube2 and kernel 2.6
Hi,
hmm, now i tryed to upgrade my fresh sarge installation on disk
to etch - whithout thinking there will be any success -
but oooops, the new 2.6.18-3-r5k-cobalt kernel is booting.
Maybe it helps to debug the install kernel.
If i shall test some things just tell me.
Greets,
clee
[ "CoLo" v1.19 ]
stage2: 83fa0000-84000000
cpu: clock 250.000MHz
pci: unit type <Qube2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:1d:bd}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> mount
ide: {SAMSUNG SP2514N}
ide: LBA48 488397168
ide: supports PIO mode 4
ide: mode 4 timing
ide: partition 1
ext2: revision 0
1> lcd 'Booting...' /dev/{mounted-volume}
1> -load /boot/default.colo
ext2: {boot/default.colo} --> {./default.colo}
000000bf 191t
1> -script
2> mount hda1
ext2: revision 0
2> load /vmlinux
ext2: {vmlinux} --> {vmlinux-2.6.18-3-r5k-cobalt}
0034ff6e 3473262t
2> lcd "Booting Debian"
2> var cons_opts ''
2> -var cons_opts console=ttyS0,{console-speed}
2> execute root=/dev/hda4 {cons_opts}
elf32: 00080000 - 0033701f (802f3000) (ffffffff.80000000)
elf32: 80080000 (80080000) 2687110t + 159642t
Linux version 2.6.18-3-r5k-cobalt (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #1 Mon
Dec 4 17:23:28 UTC 2006
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 5
Cobalt: early console registered
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists. Total pages: 16384
Kernel command line: root=/dev/hda4 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
Linux version 2.6.18-3-r5k-cobalt (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #1 Mon
Dec 4 17:23:28 UTC 2006
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 5
Cobalt: early console registered
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists. Total pages: 16384
Kernel command line: root=/dev/hda4 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61616k/65536k available (2041k kernel code, 3864k reserved, 462k data, 120k init, 0k highmem)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(946684800.264:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12ac
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ÿserial8250: ttyS0 at I/O 0xc800000 (irq = 21) is a ST16650V2
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Linux Tulip driver version 1.1.13 (December 15, 2004)
PCI: Enabling device 0000:00:07.0 (0001 -> 0003)
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at b2080000, 00:10:E0:00:1D:BD, IRQ 19.
PCI: Enabling device 0000:00:0c.0 (0001 -> 0003)
tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at b2080400, 00:10:E0:00:1D:C8, IRQ 20.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG SP2514N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
INIT: version 2.86 booting
[...]
#
On 20:20 01/05/07, Clemens Kurtenbach wrote:
> On 19:15 01/05/07, Martin Michlmayr wrote:
> > * Clemens Kurtenbach <ck@stargate.ask.fh-furtwangen.de> [2007-01-05 15:00]:
> > > the serial installation way. The kernel stop's with this line:
> > >
> > > PID hash table entries: 512 (order: 9, 2048 bytes)
> >
> > Can you please try whether the 2.6.16 and 2.6.17 kernels work:
> >
> > http://people.debian.org/~ths/d-i/mipsel/images/2006-05-28/cobalt/netboot-2.6/vmlinux-2.6.16-1-r5k-cobalt
> > http://people.debian.org/~ths/d-i/mipsel/images/2006-10-16/cobalt/netboot-2.6/boot/vmlinux-2.6.17-2-r5k-cobalt
>
> So here is the output of 2.6.16
>
> #
> [...]
> elf32: 00080000 - 0032301f (802df000) (ffffffff.80000000)
> elf32: 80080000 (80080000) 2605190t + 159642t
> net: interface down
> #
>
> here nothing happens anymore. And with 2.6.17
>
> #
> [...]
> Synthesized TLB store handler fastpath (34 instructions).
> Synthesized TLB modify handler fastpath (33 instructions).
> PID hash table entries: 512 (order: 9, 2048 bytes)
> #
>
> it stopps at the same point like with 2.6.18
>
> Greets,
> clee
Reply to: