Re: debian on cobalt raq1
On Wed, 2006-12-20 at 19:23 +0100, Martin Michlmayr wrote:
>
> A RaQ with a 150 MhZ CPU, isn't it?
Yes, it's a 150 Mhz cpu. http://en.wikipedia.org/wiki/Cobalt_RaQ has a
bit of info. It looks like it's a MIPS RM5230 cpu.
>
> Daniel, can you post the message from 2.4.27.
Sure, here it is.
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Mon Aug 24 14:44:00 PDT 1998
1.LCD Test................................PASS
2.Controller Test.........................PASS
4.Flash Test..............................PASS
5.Bank 0:.................................0M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:...............................**Simm0 must be >= Simm1**
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Decompressing - done.
[ "CoLo" v1.16 ]
stage2: 83fa0000-84000000
cpu: clock 150.000MHz
pci: unit type <RaQ>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:1f:0b}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: OFFER 192.168.1.67 <-- 192.168.1.1
dhcp: REQUEST
arp: sent request for 192.168.1.1
arp: resolved 192.168.1.1
dhcp: ACK
net: interface down
tulip: link up (100Mbps full-duplex)
net: interface up
address 192.168.1.67
netmask 255.255.255.0
gateway 192.168.1.1
1> lcd 'Booting...' {ip-address}
1> nfs {dhcp-next-server} {dhcp-root-path} {dhcp-boot-file}
arp: sent request for 192.168.1.1
arp: resolved 192.168.1.1
arp: request from 192.168.1.1
nfs: mounted "/nfsroot"
nfs: lookup "default.colo"
nfs: mode <0100644>
0KB loaded
000000fd 253t
nfs: unmounted "/nfsroot"
1> -script
2> -serial on
2> lcd 'Loading' 'debian-installer'
2> nfs {dhcp-next-server} {dhcp-root-path} vmlinux-2.4.27-r5k-cobalt
initrd.gz
nfs: mounted "/nfsroot"
nfs: lookup "initrd.gz"
nfs: mode <0100644>
1641KB loaded (3282KB/sec)
nfs: lookup "vmlinux-2.4.27-r5k-cobalt"
nfs: mode <0100644>
2702KB loaded (2702KB/sec)
002a3782 2766722t
0019a4bb 1680571t
nfs: unmounted "/nfsroot"
2> execute rd_start=0x{initrd-start} rd_size=0x{initrd-size}
console=ttyS0,{cons
ole-speed}
elf32: 00080000 - 002963bf (80210040) (ffffffff.80000000)
elf32: 80080000 (80080000) 1998848t + 189376t
net: interface down
��CPU revision is: 00002810
FPU revision is: 00002810
Primary instruction cache 16kB, physically tagged, 2-way, linesize 32
bytes.
Primary data cache 16kB 2-way, linesize 32 bytes.
Linux version 2.4.27-r5k-cobalt (root@swarm) (gcc version 3.3.5 (Debian
1:3.3.5-
13)) #1 Thu Jun 1 13:47:02 UTC 2006
Cobalt Board ID: 4
ttyS00 at iomem 0xbc800000 (irq = 7) is a ST16650V2
Attempt to register invalid minor number with devfs (0:0).
Attempt to register invalid minor number with devfs (0:0).
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initial ramdisk at: 0x83dfdb40 (1680571 bytes)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: rd_start=0x83dfdb40 rd_size=0x19a4bb
console=ttyS0,115200
Calibrating delay loop... 149.50 BogoMIPS
Memory: 60528k/65536k available (1591k kernel code, 5008k reserved, 252k
data, 9
2k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Cobalt LCD Driver v2.10
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI en
abled
�ttyS00 at 0xbc800000 (irq = 7) is a ST16650V2
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Enabling device 00:07.0 (0041 -> 0043)
tulip0: Old format EEPROM on 'Cobalt Microserver' board. Using
substitute media
control info.
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3)
block.
tulip0: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0x100000, 00:10:E0:00:1F:0B, IRQ
4.
PCI: Enabling device 00:0c.0 (0005 -> 0007)
tulip1: Old format EEPROM on 'Cobalt Microserver' board. Using
substitute media
control info.
tulip1: EEPROM default media type Autosense.
tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3)
block.
tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0x101000, 00:10:E0:00:1F:0C, IRQ
13.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller at PCI slot 00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci00:09.1
ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:pio, hdd:pio
hda: ST315323A, ATA DISK drive
hdc: IRQ probe failed (0xfffffefa)
hdc: IRQ probe failed (0xfffffefa)
hdd: IRQ probe failed (0xfffffefa)
hdd: IRQ probe failed (0xfffffefa)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: 30008475 sectors (15364 MB) w/512KiB Cache, CHS=29770/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [1867/255/63] p1 p2 p3 < p5 p6
p7 p8 p
9 >
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1641k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 92k freed
Setting up filesystem, please wait ...
Starting system log daemon: syslogd, klogd.
Reply to: