Re: debian on cobalt raq1
On Tue, 2006-12-19 at 11:27 +0100, Martin Michlmayr wrote:
> * Daniel Spratlen <dan@spratlen.net> [2006-12-18 16:33]:
> > I tried installing debian etch on a cobalt raq1 using Martin's
> > instructions at http://cyrius.com/debian/cobalt/install.html. I'm able
> > to boot and load colo, select either the ssh or serial method, however
> > after selecting either method the box hangs.
>
> Does it show anything on the serial console? What is the last thing
> you see? Can you try whether the sarge installer boots?
> --
> Martin Michlmayr
> http://www.cyrius.com/
>
>
Here is what I see on serial when attempting the ssh install and the
serial install. You'll note that this is using the nfsroot found at
http://people.debian.org/~ths/d-i/mipsel/images/daily/cobalt/ I get the
same then when using the nfsroot from your site.
The Sarge install seems to work just fine (the install is currently
running, having made it past disk partitioning it is now downloading and
verifying packages). For the sarge install I used the image found here
http://ftp.nl.debian.org/debian/dists/sarge/main/installer-mipsel/current/images/cobalt/
ssh attempt
-------------------------------------------------------
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Mon Aug 24 14:44:00 PDT 1998
1.LCD Test................................PASS
2.Controller Test.........................PASS
4.Flash Test..............................PASS
5.Bank 0:.................................0M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:...............................**Simm0 must be >= Simm1**
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Decompressing - done.
[ "CoLo" v1.22 ]
stage2: 83fa0000-84000000
cpu: clock 150.000MHz
pci: unit type <RaQ>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:1f:0b}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: OFFER 192.168.1.67 <-- 192.168.1.1
dhcp: REQUEST
dhcp: ACK
net: interface down
tulip: link up (100Mbps full-duplex)
net: interface up
address 192.168.1.67
netmask 255.255.255.0
gateway 192.168.1.1
1> lcd 'Booting...' {ip-address}
1> nfs {dhcp-next-server} {dhcp-root-path} {dhcp-boot-file}
nfs: mounted "/nfsroot"
nfs: lookup "default.colo"
nfs: mode <0100644>
1KB loaded
00000321 801t
nfs: unmounted "/nfsroot"
1> -script
2> -serial on
2> var args ""
2> select 'BOOT SELECTION' 50 'install SSH' 'install serial' 'rescue
SSH' 'rescu
e serial'
2> goto {menu-option}
2> var title1 'Starting the'
2> var title2 'installer (SSH)'
2> var initrd "ssh_initrd.gz"
2> goto 4
2> lcd "{title1}" "{title2}"
2> nfs {dhcp-next-server} {dhcp-root-path} vmlinux-2.6.18-3-r5k-cobalt
{initrd}
nfs: mounted "/nfsroot"
nfs: lookup "ssh_initrd.gz"
nfs: mode <0100644>
3651KB loaded (2920KB/sec)
nfs: lookup "vmlinux-2.6.18-3-r5k-cobalt"
nfs: mode <0100644>
3392KB loaded (2713KB/sec)
0034ff6e 3473262t
00390b87 3738503t
nfs: unmounted "/nfsroot"
2> relocate
elf32: 00080000 - 0033701f (802f3000) (ffffffff.80000000)
2> execute rd_start=0x{initrd-start} rd_size=0x{initrd-size}
console=ttyS0,{cons
ole-speed} {args}
elf32: 00080000 - 0033701f (802f3000) (ffffffff.80000000)
exec: relocating initrd (80338000)
elf32: 80080000 (80080000) 2687110t + 159642t
net: interface down
end ssh
-----------------------------------------------------
serial attempt
-----------------------------------------------------
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Mon Aug 24 14:44:00 PDT 1998
1.LCD Test................................PASS
2.Controller Test.........................PASS
4.Flash Test..............................PASS
5.Bank 0:.................................0M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:...............................**Simm0 must be >= Simm1**
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Decompressing - done.
[ "CoLo" v1.22 ]
stage2: 83fa0000-84000000
cpu: clock 150.000MHz
pci: unit type <RaQ>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:1f:0b}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: OFFER 192.168.1.67 <-- 192.168.1.1
dhcp: REQUEST
dhcp: ACK
net: interface down
tulip: link up (100Mbps full-duplex)
net: interface up
address 192.168.1.67
netmask 255.255.255.0
gateway 192.168.1.1
1> lcd 'Booting...' {ip-address}
1> nfs {dhcp-next-server} {dhcp-root-path} {dhcp-boot-file}
nfs: mounted "/nfsroot"
nfs: lookup "default.colo"
nfs: mode <0100644>
1KB loaded
00000321 801t
nfs: unmounted "/nfsroot"
1> -script
2> -serial on
2> var args ""
2> select 'BOOT SELECTION' 50 'install SSH' 'install serial' 'rescue
SSH' 'rescu
e serial'
2> goto {menu-option}
2> var title1 'Starting the'
2> var title2 'installer (ttyS)'
2> var initrd "serial_initrd.gz"
2> goto 3
2> lcd "{title1}" "{title2}"
2> nfs {dhcp-next-server} {dhcp-root-path} vmlinux-2.6.18-3-r5k-cobalt
{initrd}
nfs: mounted "/nfsroot"
nfs: lookup "serial_initrd.gz"
nfs: mode <0100644>
2625KB loaded (2625KB/sec)
nfs: lookup "vmlinux-2.6.18-3-r5k-cobalt"
nfs: mode <0100644>
3392KB loaded (2713KB/sec)
0034ff6e 3473262t
00290455 2688085t
nfs: unmounted "/nfsroot"
2> relocate
elf32: 00080000 - 0033701f (802f3000) (ffffffff.80000000)
2> execute rd_start=0x{initrd-start} rd_size=0x{initrd-size}
console=ttyS0,{cons
ole-speed} {args}
elf32: 00080000 - 0033701f (802f3000) (ffffffff.80000000)
exec: relocating initrd (80338000)
elf32: 80080000 (80080000) 2687110t + 159642t
net: interface down
end serial
--------------------------------------------------------------
Reply to: