Re: Etch install report on Indy R4000-PC
>>>>> "Martin" == Martin Michlmayr <email@example.com> writes:
Martin> Isn't this just a matter of the Indy PROM not being able to
Martin> load a 64 bit kernel, so you need to convert it with objdump?
Kernel seems to load fine (at least arcsboot says so) :
arcsboot: ARCS Linux ext2fs loader 0.3.8.7
Loading v2.6.16 from scsi(0)disk(1)rdisk(0)partition(0)
Allocated 0x38 bytes for segments
Loading 64-bit executable
Loading program segment 1 at 0x88004000, offset=0x0 4000, size = 0x03ef086
[actual loading, skipped]
Starting ELF64 kernel
Then nothing happends, and a reset is needed to get the machine back
And if you don't know where you're going, any road will take you there...