Re: Booting a Qube 2700 from hard disk
> * firstname.lastname@example.org <email@example.com> [2005-03-19 20:46]:
>> computer, with little modifications from the mips-debian list:
>> mkfs.ext2 -r0 /dev/hdc1
>> mkfs.ext3 /dev/hdc2
>> mkfs.ext3 /dev/hdc6
> I suppose the "little modifications" refer to formating the home. I
> added this (as well creating the swap partition), thanks.
>> cd /mnt
>> tar xvfj base.tar.bz2
> That's the same as mine, just different. ;)
>> When I install the hard disk to the qube, without network wire
>> it sometimes shows the first menu list (CONSOLE STATE) and sometimes
> You should in theory only get this question once.
>> The LCD sequence is:
>> Starting Up
>> CONSOLE STATE -> Console Off
>> BOOT SELECTION -> Disk (hda)
>> ! UNIT BOOT FAILED !
> Does it never boot, or does it only not boot when you get the console
Yes, it never boot in both cases.