Re: cs: pcmcia_socket0: cardbus cards are not supported

[Alexander Danilov <alexander.a.danilov@gmail.com>]

Stefan Welte пишет:
> Hello,
> the cardbus/pcmcia-wlan-card (11ab:1faa) doesn't work on my laptop with debian lenny, 2.6.26-2-486:
> dmesg shows:
> cs: pcmcia_socket0: cardbus cards are not supported.
> or (with second slot)
> cs: pcmcia_socket1: cardbus cards are not supported.
> another card is working in the pcmcia-slots, so the slot is ok.
[skip]
> lspci -vv
> 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless
> (rev 03)
>         Subsystem: Netgear WG511 v2 54MBit/ Wireless PC-Card
>         Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
> > > > > SERR- <PERR- INTx-
>         Interrupt: pin A routed to IRQ 10
>         Region 0: Memory at 11000000 (32-bit, non-prefetchable) [size=64K]
>         Region 1: Memory at 11010000 (32-bit, non-prefetchable) [size=64K]
>         Capabilities: [40] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I use libertas compact flash card on my zaurus with debian, this card use 2 firmware files 
libertas_cs.fw and libertas_cs_helper.fw, try to find it through google. I remember, that I find it 
in some openbsd driver project.