[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Accessing CDROM drive in laptop SATA/PATA hardware config



Hello,
I have a Toshiba M40X-112 laptop.
So far I am quite happy with it, but the DVD-writer does not work.
I am getting loads of:

---snip---
Aug  6 13:39:01 satellita kernel: sr0: CDROM not ready.  Make sure there is a disc in the drive.
Aug  6 13:39:32 satellita last message repeated 31 times
---snap---

I have googled around and this problem comes up quite a few times.
Most remedies deal with older kernels and so far I cannot figure
out a way to make it work.

When I look at kernel messages, there is:
---snip---
Aug  6 13:39:01 satellita kernel: sr0: CDROM not ready.  Make sure there is a disc in the drive.
Aug 12 17:02:36 satellita kernel: ahci: probe of 0000:00:1f.2 failed with error -22
Aug 12 17:02:36 satellita kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Aug 12 17:02:36 satellita kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Aug 12 17:02:36 satellita kernel: scsi0 : ata_piix
Aug 12 17:02:36 satellita kernel: scsi1 : ata_piix
Aug 12 17:02:36 satellita kernel: ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
Aug 12 17:02:36 satellita kernel: ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
---snap---

So for me it looks like the ahci module is giving up and ata_piix is
taking over.
lsmod prints out:
---snip---
Aug  6 13:39:01 satellita kernel: sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr_mod                 17284  1 
cdrom                  33568  1 sr_mod
sd_mod                 27904  6 
ata_piix               14148  6 
ahci                   22020  0 
ata_generic             8324  0 
libata                116624  3 ata_piix,ahci,ata_generic
scsi_mod              137388  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
---snap---

lspci shows:
---snip---
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
---snap---

kernel command line is:
---snip---
Aug 12 17:02:36 satellita kernel: Kernel command line: root=/dev/sda5 ro libata.atapi_enabled=1
---snap---

So I have tried this libata.atapi_enabled=1 option, but this doesnt
help.

Any advice?
Thanks Thomas
-- 
Thomas Hahn == thahn01@t-online.de



Reply to: