Re: IBM T21 Ethernet controller not working under Debian Etch
- To: debian-laptop@lists.debian.org
- Subject: Re: IBM T21 Ethernet controller not working under Debian Etch
- From: Michael Henneton <m.henneton@gmail.com>
- Date: Fri, 10 Aug 2007 11:53:40 +0200
- Message-id: <[🔎] 200708101153.40882.m.henneton@gmail.com>
- In-reply-to: <listhandler=7&site=www.debianhelp.org&nid=9460&pid=&cid=&uid=5233&tid=&1a669e81c8093745261889539694be7f@www.debianhelp.org>
- References: <listhandler=7&site=www.debianhelp.org&nid=9460&pid=&cid=&uid=5233&tid=&1a669e81c8093745261889539694be7f@www.debianhelp.org>
Le vendredi 10 août 2007 10:18, ozmate a écrit :
>
> Hi,
>
> I've installed Etch on an IBM T21 laptop. Everything works just fine,
> how great it is to work with such a complete operating system.
>
> But unfortunately I'm struggling with the embedded NIC card.
>
> lspci -v
> Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 09)
>
> It appears in the Networking configuration panel. But if:
>
> 1/ if I set it to dhcp: I don't have any IP Address.
> ifconfig -a shows me that no IP address has been assigned
>
> 2/ if I set it to static: I can't ping anything
> ifconfig -a shows me that the correct settings are set, though.
>
> Now, if I plug an PCMCIA Xircom EtherJet card in the laptop,
> it is recognized and works fine. DHCP ok, Static IP ok. I can
> access the outside world...
>
> I've surfed the Internet to find any solutions, but with no lucks.
> Any help would be much appreciated.
>
> Thanks
>
>
>
>
>
>
> --
> To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
>
Hello,
Did you try with installing a newer kernel (like 2.6.21) with backport ?
Because the default one is a little out of date (it is a stable release after
all ...)
http://www.backports.org/dokuwiki/doku.php?id=instructions
search for a linux-image_kernel-version
Reply to: