Re: ipw3945 driver issues with Debian Sid
I have problems with ipw3945 and debian etch in a dell latitude when I
try to connect to an US Robotics wireless point. The connection with
other wireless points is OK.
Regards,
2007/7/6, Josh Richard <jrichar4@d.umn.edu>:
Good Day,
I am having connection issues with a new laptop running the ipw3945
driver. Hopefull something jumps out at someone.
Here are the details...
Debian sid on HP Compaq NC6320.
The wireless interface is eth2.
/lib/modules/2.6.21-2-686/contrib/ipw3945.ko
version=1.2.1dmpr
/sbin/ipw3945d
version: 1.7.22
iwlist Wireless-Tools version 29
Compatible with Wireless Extension v11 to v22.
Kernel Currently compiled with Wireless Extension v22.
eth2 Recommend Wireless Extension v16 or later,
Currently compiled with Wireless Extension v22.
eth2 Available private ioctls :
set_power (8BE0) : set 1 int & get 0
get_power (8BE1) : set 0 & get 80 char
set_mode (8BE2) : set 1 int & get 0
get_mode (8BE3) : set 0 & get 80 char
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 16 char
reset (8BE7) : set 0 int & get 0
monitor (8BE6) : set 2 int & get 0
###
#
## Symptoms
#
###
ipw3945 associates to the wireless infrastructure using:
iwconfig eth2 essid any
which in turn associates with our SSID. I am able to obtain an ip
address using DHCP after many DHCPREQUESTs. Network traffic does pass
very slowly and frequent timeouts occur. Overall, I would consider
wireless unusable.
What is important to take away is the following:
0. Similar behavior running etch on different versions of the module,
regulatory daemon and microcode.
1. In watching the signal meter using wavemon, I notice the link is
available, then drops out and returns.
I can correlate link drops with the following syslog messages:
/var/log/syslog
Jul 6 10:46:15 shakey2 kernel: ipw3945: tx cmd rate scale failed.
Jul 6 10:46:15 shakey2 kernel: ipw3945: ERROR: No TX rate available.
Jul 6 10:46:15 shakey2 kernel: ipw3945: tx cmd rate scale failed.
Jul 6 10:46:15 shakey2 kernel: ipw3945: ERROR: No TX rate available.
Jul 6 10:46:15 shakey2 kernel: ipw3945: tx cmd rate scale failed.
Jul 6 10:46:15 shakey2 kernel: ipw3945: ERROR: No TX rate available.
Jul 6 10:46:15 shakey2 kernel: ipw3945: tx cmd rate scale failed.
Jul 6 10:46:15 shakey2 kernel: ipw3945: ERROR: No TX rate available.
Jul 6 10:46:15 shakey2 kernel: ipw3945: tx cmd rate scale failed.
Jul 6 10:46:15 shakey2 kernel: ipw3945: ERROR: No TX rate available.
Jul 6 10:46:15 shakey2 kernel: ipw3945: tx cmd rate scale failed.
Jul 6 10:46:15 shakey2 kernel: ipw3945: ERROR: No TX rate available.
Jul 6 10:46:15 shakey2 kernel: ipw3945: tx cmd rate scale failed.
/var/log/ipw3945d/ipw3945d.log
2007-07-06 10:58:06: WARNING: scan complete while not in scan.
It seems to be associating continously and unable to maintain a
reliable connection.
Has anyone else experienced this issue?
Any assistance provided is greatly appreciated.
Regards,
Josh Richard
--
To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
------------------------------------------------------------------------
Felipe Gabaldón Castillo.
E.T.S.I. Caminos, Canales y Puertos.
Universidad Politécnica de Madrid.
Tfno : 91-3366696
FAX : 91-3366702
e-mail: felipe@mecanica.upm.es
felipe.gabaldon@upm.es
felipe.gabaldon@gmail.com
www : http://w3.mecanica.upm.es/~felipe/
------------------------------------------------------------------------
Reply to: