Re: Low resolution on external monitor with Fujitsu notebook
On Mon, Apr 18, 2005 at 06:43:09AM +0530, Ritesh Raj Sarraf wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Paulo Marcel Coelho Aragão wrote:
>
> > Ritesh,
> >
> > Thanks for the suggestions, but no joy yet.
> >
> > I discovered that the 'trident' driver has an option called "Display"
> > which can be set to "CRT", "LCD" or "Dual". With "LCD" or "Dual", I just
> > get the LCD resolution 800x600. With "CRT", I can see in the log that it
> > has accepted 1024x768 but the screen just goes blank.
> >
> > I also tried defining two Device sections, one for each Monitor, but
> > then XFree86 doesn't even start.
> >
> > I'm not quite sure I'm doing something wrong (or not doing something...)
> > or this is just a hardware/software restriction. Googling didn't bring
> > more light. I'm really stuck.
> >
>
> Can you post your `lspci -v` output ?
Here it is:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 03)
Subsystem: Fujitsu Limited.: Unknown device 1039
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at f4f0 [size=16]
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at f4c0 [size=32]
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
0000:00:10.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01)
Subsystem: Fujitsu Limited. LB LT Modem V.90 56k
Flags: medium devsel, IRQ 9
Memory at fedffc00 (32-bit, non-prefetchable) [disabled] [size=256]
I/O ports at f4e8 [disabled] [size=8]
I/O ports at f000 [disabled] [size=256]
Capabilities: <available only to root>
0000:00:13.0 CardBus bridge: Texas Instruments PCI1221
Subsystem: Fujitsu Limited.: Unknown device 1036
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
0000:00:13.1 CardBus bridge: Texas Instruments PCI1221
Subsystem: Fujitsu Limited.: Unknown device 1036
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
0000:00:14.0 VGA compatible controller: Trident Microsystems Cyber 9388 (rev d3) (prog-if 00 [VGA])
Subsystem: Fujitsu Limited.: Unknown device 104f
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at fe400000 (32-bit, non-prefetchable) [size=4M]
Memory at fedc0000 (32-bit, non-prefetchable) [size=128K]
Memory at fe800000 (32-bit, non-prefetchable) [size=4M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Thanks for your interest and attention, Ritesh
Paulo
Reply to: