HP Compaq nx8030 hung up installing Sarge
Hi all,
I'm trying to install a Sarge in a HP Compaq nx8030
Installation process goes ok with an almost "yes to all" configuration
until the system restarts booting from hd.
Then it gets hung up.
I've tried with:
- netinst 20050309 (or alike)
- netinst 20050331
- netinst RC2
- netinst RC3
In every case, with kernel 2.6 (saying "linux26" a "boot:" prompt) and
kernel 2.4
Those are last lines before:
----------------------------------------------------------------------
[...]
i810_audio: codec 0 is a softmodem - skipping.
Unable to handle kernel NULL pointer dereference at virtual address 00000024
printing eip:
dea32114
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: i810_audio ac97_codec soundcore 8139too mii ohci1394
yenta_socket pcmcia_core capability commoncap tsdev mousedev joydev
evdev sr_mod sbp2 scsi_mod ieee1394 psmouse ide_cd cdrom genrtc ext3 jbd
ide_generic piix ide_disk ide_core unix font vesafb cfbcopyarea
cfbimgblt cfbfillrect
CPU: 0
EIP: 0060:[<dea32114>] Not tainted
EFLAGS: 00010282 (2.6.8-2-386)
EIP is at i810_set_spdif_output+0x11/0xd6 [i810_audio]
eax: dd947c00 ebx: 00000000 ecx: dd947c00 edx: dd039000
esi: 00000000 edi: dda72bf0 ebp: dda72bc0 esp: ddbcbe70
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 1112, threadinfo=ddbca000 task=dd6b97b0)
Stack: dda72bc0 00000000 dda72bf0 dea39b2c dea36233 dda72bc0 ffffffff
00000000
00000286 00000a04 dda72bc0 00000000 dda72bc0 dea35fba dda72bc0
dea374e0
dd947c00 00000001 00000000 00000001 dd947c00 dd947c00 dde6e800
dd947e50
Call Trace:
[<dea36233>] i810_configure_clocking+0xaa/0x419 [i810_audio]
[<dea35fba>] i810_ac97_init+0x325/0x4f4 [i810_audio]
[<dea369d4>] i810_probe+0x432/0x54c [i810_audio]
[<c01946d1>] pci_device_probe_static+0x2e/0x41
[<c0194703>] __pci_device_probe+0x1f/0x32
[<c0194732>] pci_device_probe+0x1c/0x31
[<c01d43e7>] bus_match+0x2e/0x4d
[<c01d44bc>] driver_attach+0x39/0x6e
[<c01d4820>] bus_add_driver+0x58/0x70
[<c01d4b6f>] driver_register+0x2d/0x31
[<c01948d6>] pci_register_driver+0x4e/0x6b
[<de827014>] i810_init_module+0x14/0x89 [i810_audio]
[<c012af94>] sys_init_module+0xe3/0x1d4
[<c0105f97>] syscall_call+0x7/0xb
Code: 8b 53 24 31 ff 83 7a 08 00 75 0d 66 83 a0 16 02 00 00 fb e9
/etc/rcS.d/S36discover: line 204: 1112 Segmentation fault
modprobe $MODULE
Loading uhci_hcd module.
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00002ef014]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ip1394: $Rev: 1224 $ Ben Collins <bconllins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
USB Universal Host Controller Interface driver v2.2
----------------------------------------------------------------------
And then it gets hung up :(
Any idea of what should I try? Maybe there's something I could disable?
Please CC to me, since I'm not subscribed to the list.
Thank you a lot,
Joaquín
-------------------------------------------------
Correo enviado mediante IMP
Departamento de Informatica y Sistemas
Universidad de Las Palmas de Gran Canaria
Reply to: