Re: Debian Sarge 2.4 to 2.6 kernel upgrade has USB issues
Op zo 15-08-2004, om 05:58 schreef Seehow Youare:
> Hi all,
>
> Sarge 2.6.6 kernel on a Dell Inspirion 8500
>
> I have upgraded to the 2.6.6 kernel and ACPI works (Yay !!)
> However no USB stuff works (boo !!) Mouse and built-in Synaprics
> touch pad don't work so X isn't much use.
>
> I have Googled hard but can't seem to find a decent Debain orientated
> doco that informs me as to what I need to change to get USB stuff
> working or even my touchpad mouse.
>
> All my hardware (USB included) works under Fedora Core 2 2.6.7
> kernel and also under Debian with the 2.4 kernel. So, I copied some X
> stuff and fstab stuff from Fedora into the matching Debian files but
> no joy.
>
> I added proc and sys sections to fstab and changed my mouse entry in
> XF86Config-4. See below
>
> Any hints/links appreciated :-)
>
>
> #Section "InputDevice"
> # Identifier "Mouse0"
> # Driver "mouse"
> # Option "Protocol" "PS/2"
> # Option "Device" "/dev/psaux"
> # Option "ZAxisMapping" "4 5"
> # Option "Emulate3Buttons" "yes"
> #EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "yes"
> EndSection
>
> Section "InputDevice"
>
> # If the normal CorePointer mouse is not a USB mouse then
> # this input device can be used in AlwaysCore mode to let you
> # also use USB mice at the same time.
> Identifier "DevInputMice"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "no"
> EndSection
>
as root do: modprobe psmouse mousedev
If it works put it in etc/modules so it will be loaded at startup
Hans
Reply to: