Re: Configuration problem for wireless card with sid
snip---
> Warning: Driver for device eth1 has been compiled with version 13
> of Wireless Extension, while this program is using version 16.
> Some things may be broken...
>
snip ---
Yes i get that message.
After implementing your "pc_bug" thingy syslog says as follows
Sep 21 15:58:22 laptop cardmgr[446]: executing: 'modprobe -r orinoco_cs'
Sep 21 15:58:22 laptop cardmgr[446]: executing: 'modprobe -r orinoco'
Sep 21 15:58:23 laptop cardmgr[446]: executing: 'modprobe -r hermes'
Sep 21 15:58:25 laptop cardmgr[446]: socket 1: Belkin
Sep 21 15:58:25 laptop cardmgr[446]: executing: 'modprobe hermes'
Sep 21 15:58:25 laptop kernel: hermes.c: 16 Jan 2002 David Gibson <hermes@gibson.dropbear.id.au>
Sep 21 15:58:25 laptop cardmgr[446]: executing: 'modprobe orinoco'
Sep 21 15:58:25 laptop kernel: orinoco.c 0.09b (David Gibson <hermes@gibson.dropbear.id.au> and others)
Sep 21 15:58:26 laptop cardmgr[446]: executing: 'modprobe orinoco_cs'
Sep 21 15:58:26 laptop kernel: orinoco_cs.c 0.09b (David Gibson <hermes@gibson.dropbear.id.au> and others)
Sep 21 15:58:26 laptop kernel: eth1: Station identity 001f:0003:0000:0008
Sep 21 15:58:26 laptop kernel: eth1: Looks like an Intersil firmware version 0.08
Sep 21 15:58:26 laptop kernel: eth1: Ad-hoc demo mode supported
Sep 21 15:58:26 laptop kernel: eth1: IEEE standard IBSS ad-hoc mode supported
Sep 21 15:58:26 laptop kernel: eth1: WEP supported, 104-bit key
Sep 21 15:58:26 laptop kernel: eth1: MAC address removed by me
Sep 21 15:58:26 laptop kernel: eth1: Station name "Prism I"
Sep 21 15:58:26 laptop kernel: eth1: ready
Sep 21 15:58:26 laptop kernel: eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
Sep 21 15:58:26 laptop cardmgr[446]: executing: './network start eth1'
Sep 21 15:58:26 laptop cardmgr[446]: + Don't seem to be have all the variables for eth1/inet.
The things is this card has worked before with this config.
Thomas
Reply to: