Re: CompactFlash PC Card Adapter
I think you should enable scsi-emulation in the kernel for this to work.
-->negon
On Wed, 2003-02-05 at 12:59, Florian Reichert wrote:
> Hello!
>
> I have a SanDisk PC Card Adapter for CompactFlash Cards. I rember that
> this Card has been working without any problems with mdk.
>
> But now with debian it doesn't work.
>
> In woody I added the following to my /etc/pcmcia/config:
> card "Anonymous Memory"
> anonymous
> bind "ide-cs"
> ^^^^^^^
> Before I change that ther was: bind "memory_cs" And the Card was
> recogniced as Anonymous MemoryCard.
>
> But now I get that error:
> [from the HOWTO]
> | Or alternately:
> | * All card insertions generate a high beep followed by a low beep.
> | * All cards are identified as ``anonymous memory cards''.
> | * The system log reports that various memory ranges have been
> | excluded.
> And nothing happens.
>
> In the config.opt it says:
> ----------------------------
> |# System resources available for PCMCIA devices
> |
> |# Dell Notebooks freeze if something between 0x810-0x81f is included!
> |include port 0x100-0x4ff, port 0x800-0x80f, port 0x820-0x8ff, port 0xc00-0xcff
> |
> |include memory 0xc0000-0xfffff
> |include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
> |
> |# High port numbers do not always work...
> |# include port 0x1000-0x17ff
> ----------------------------
>
> According to the Howto I had a look in the Windows System Manager but
> don't know how to apply what I found there:
>
> There was at firts one entry for "PCMCIA Kartendienste" (may be
> Cardmanager in english)
> 05040000 - 05040FFF
> additional there where to entries Toshiba ToPIC95 CardBus
> both IRQ11
> one 05031000 - 05031FFF
> the other 05030000 - 05030FFF
>
> How do I have to change my settings?
>
> Thanks for Help!
>
> Florian
>
> P.S. my Cardbus Nic works.
>
>
>
> --
> Florian Reichert
> Please notice: e-mails to my adress florianr@gmx.net must not be larger
> than 5 k, because they will be filtered else. If you would like to send
> anny larger e-mail to me pleas ask for alternative Contact!
>
Reply to: