Re: Configuration problem for wireless card with sid
actually i think the problem is that the binding to orinoco is not
on restarting pcmcia i get the following error
error in config line 1091: no ID method for "Belkin"
i have a line in config that says
manfid the rihgt numbers
what does your /etc/pcmcia/config say with respect to Your card?
On Sat, 20 Sep 2003, Cristian Ionescu-Idbohrn wrote:
> On Sat, 20 Sep 2003, Thomas wrote:
> > The only difference after making your changes was that ifup now generates
> > the following
> > "Ignoring unknown interface eth1=eth1"
> :( Maybe it's not eth1.
> Take a look at the result from:
> # dmesg
> It should show something similar to this:
> | Installing knfsd (copyright (C) 1996 firstname.lastname@example.org).
> | Linux Kernel Card Services 3.1.22
> | options: [pci] [cardbus] [pm]
> | PCI: Enabling device 00:0b.0 (0000 -> 0002)
> | PCI: Found IRQ 10 for device 00:0b.0
> | PCI: Sharing IRQ 10 with 00:11.0
> | Yenta IRQ list 0000, PCI irq10
> | Socket status: 30000810
> | cs: IO port probe 0x0c00-0x0cff: clean.
> | cs: IO port probe 0x0800-0x08ff: clean.
> | cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
> | cs: IO port probe 0x0a00-0x0aff: clean.
> | cs: memory probe 0xa0000000-0xa0ffffff: clean.
> | orinoco.c 0.13e (David Gibson <email@example.com> and others)
> | orinoco_cs.c 0.13e (David Gibson <firstname.lastname@example.org> and others)
> | eth1: Station identity 001f:0005:0001:0003
> | what's the name if the iface?
> To UNSUBSCRIBE, email to email@example.com
> with a subject of "unsubscribe". Trouble? Contact firstname.lastname@example.org