[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Configuration problem for wireless card with sid

On Sat, 20 Sep 2003, Thomas wrote:

> The only difference after making your changes was that ifup now generates
> the following
> "Ignoring unknown interface eth1=eth1"

:( Maybe it's not eth1.

Take a look at the result from:

  # dmesg

It should show something similar to this:

| Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
| Linux Kernel Card Services 3.1.22
|   options:  [pci] [cardbus] [pm]
| PCI: Enabling device 00:0b.0 (0000 -> 0002)
| PCI: Found IRQ 10 for device 00:0b.0
| PCI: Sharing IRQ 10 with 00:11.0
| Yenta IRQ list 0000, PCI irq10
| Socket status: 30000810
| cs: IO port probe 0x0c00-0x0cff: clean.
| cs: IO port probe 0x0800-0x08ff: clean.
| cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
| cs: IO port probe 0x0a00-0x0aff: clean.
| cs: memory probe 0xa0000000-0xa0ffffff: clean.
| orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
| orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
| eth1: Station identity 001f:0005:0001:0003
     | what's the name if the iface?


Reply to: