RE: Acer Travelmate 280
Hello,
Here is the output from the some commands.
If you need more info, let me know!
Joeri.
IFCONFIG
--------
eth0 Link encap:Ethernet HWaddr 00:00:E2:9E:4A:FB
inet addr:192.168.0.66 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:3 Base address:0x7000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:992 (992.0 b) TX bytes:992 (992.0 b)
DMESG:
------------
Linux version 2.4.20 (root@gerard) (gcc version 3.3 (Debian)) #8 SMP Mon Jun 23 22:43:48 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f760000 (usable)
BIOS-e820: 000000000f760000 - 000000000f76e000 (ACPI data)
BIOS-e820: 000000000f76e000 - 000000000f780000 (ACPI NVS)
BIOS-e820: 000000000f780000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
247MB LOWMEM available.
found SMP MP-table at 000f5cc0
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 63328
zone(0): 4096 pages.
zone(1): 59232 pages.
zone(2): 0 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00f5c60
RSD PTR v0 [PTLTD ]
__va_range(0xf7698d1, 0x68): idx=8 mapped at ffff6000
ACPI table found: RSDT v1 [PTLTD RSDT 1540.0]
__va_range(0xf76df14, 0x24): idx=8 mapped at ffff6000
__va_range(0xf76df14, 0x74): idx=8 mapped at ffff6000
ACPI table found: FACP v1 [INTEL NBGV 1540.0]
__va_range(0xf76df88, 0x24): idx=8 mapped at ffff6000
__va_range(0xf76df88, 0x50): idx=8 mapped at ffff6000
ACPI table found: APIC v1 [PTLTD APIC 1540.0]
__va_range(0xf76df88, 0x50): idx=8 mapped at ffff6000
LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
IOAPIC (id[0x1] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])
1 CPUs total
Local APIC address fee00000
__va_range(0xf76dfd8, 0x24): idx=8 mapped at ffff6000
__va_range(0xf76dfd8, 0x28): idx=8 mapped at ffff6000
ACPI table found: BOOT v1 [PTLTD $SBFTBL$ 1540.0]
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: BKDG+ICH4 APIC at: 0xFEE00000
I/O APIC #1 Version 32 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 1999.811 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 246540k/253312k available (2256k kernel code, 6384k reserved, 739k data, 140k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07
per-CPU timeslice cutoff: 1462.74 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
..TIMER: vector=0x31 pin1=-1 pin2=0
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 33.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 0 0 0 0 0 1 1 31
01 001 01 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 1 1 0 0 0 1 1 79
0b 001 01 1 1 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 0 0 0 0 0 1 1 A9
11 001 01 0 0 0 0 0 1 1 B1
12 001 01 0 0 0 0 0 1 1 B9
13 001 01 0 0 0 0 0 1 1 C1
14 001 01 0 0 0 0 0 1 1 C9
15 001 01 0 0 0 0 0 1 1 D1
16 001 01 0 0 0 0 0 1 1 D9
17 001 01 0 0 0 0 0 1 1 E1
IRQ to pin mappings:
IRQ0 -> 0:0-> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1999.7308 MHz.
..... host bus clock speed is 99.9864 MHz.
cpu: 0, clocks: 999864, slice: 499932
CPU0<T0:999856,T1:499920,D:4,S:499932,C:999864>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd824, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I2,P0) -> 0
PCI->APIC IRQ transform: (B0,I29,P0) -> 0
PCI->APIC IRQ transform: (B0,I29,P1) -> 3
PCI->APIC IRQ transform: (B0,I29,P2) -> 0
PCI->APIC IRQ transform: (B0,I29,P3) -> 7
PCI->APIC IRQ transform: (B0,I31,P0) -> 1
PCI->APIC IRQ transform: (B0,I31,P1) -> 1
PCI->APIC IRQ transform: (B0,I31,P1) -> 1
PCI->APIC IRQ transform: (B0,I31,P1) -> 1
PCI->APIC IRQ transform: (B2,I5,P0) -> 3
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver v1.1.22 [Flags: R/O]
tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded
Parsing Methods:...............................................................................................................................................................................................
191 Control Methods found and parsed (710 nodes total)
ACPI Namespace successfully loaded at root c0455be0
ACPI: Core Subsystem version [20011018]
evxfevnt-0081 [-31] Acpi_enable : Transition to ACPI mode successful
Executing device _INI methods:.................................................
49 Devices found: 49 _STA, 1 _INI
Completing Region and Field initialization:...........................................
20/23 Regions, 23/23 Fields initialized (710 nodes total)
ACPI: Subsystem enabled
EC: found, GPE 28
ACPI: System firmware supports S0 S3 S4 S5
Processor[0]: C0 C1 C2 C3, 8 throttling states
ACPI: Battery socket found, battery present
ACPI: AC Adapter found
ACPI: Power Button (FF) found
ACPI: Multiple power buttons detected, ignoring fixed-feature
ACPI: Power Button (CM) found
ACPI: Sleep Button (CM) found
ACPI: Lid Switch (CM) found
ACPI: Thermal Zone found
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
i810_rng: RNG not detected
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller on PCI bus 00 dev f9
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHS2040AT, ATA DISK drive
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c04700e4, I/O limit 4095Mb (mask 0xffffffff)
hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=4864/255/63, UDMA(100)
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected an Intel 845G Chipset.
agpgart: detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel i810 @ 0xd8000000 128MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on Intel i810 @ 0xd8000000 128MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Intel 810 + AC97 Audio, version 0.24, 22:45:40 Jun 23 2003
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xd0080c00 and 0xd0080800, IRQ 1
i810_audio: unable to allocate irq 1
es1371: version v0.30 time 22:45:42 Jun 23 2003
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: No IRQ known for interrupt pin A of device 02:09.0. Probably buggy MP table.
usb.c: registered new driver hub
Yenta IRQ list 0038, PCI irq0
Socket status: 30000007
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: No IRQ known for interrupt pin A of device 00:1d.0. Probably buggy MP table.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
PCI: Setting latency timer of device 00:1d.1 to 64
uhci.c: USB UHCI at I/O 0x1820, IRQ 3
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: No IRQ known for interrupt pin C of device 00:1d.2. Probably buggy MP table.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Adding Swap: 747012k swap-space (priority -1)
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xd00f7000, 00:00:e2:9e:4a:fb, IRQ 3
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
memory : cea6bd80
memory : cea6bd00
memory : cea6bc80
memory : cea6bd00
memory : cea6bc80
memory : cf3d8b80
memory : cea6bc80
memory : cf3d8b80
memory : cea6bd80
memory : cf3d8b80
memory : cea6bd80
memory : cea6bd00
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4 dirty entry 0.
eth0: Tx descriptor 0 is 00002000. (queue head)
eth0: Tx descriptor 1 is 00002000.
eth0: Tx descriptor 2 is 00002000.
eth0: Tx descriptor 3 is 00002000.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4 dirty entry 0.
eth0: Tx descriptor 0 is 00002000. (queue head)
eth0: Tx descriptor 1 is 00002000.
eth0: Tx descriptor 2 is 00002000.
eth0: Tx descriptor 3 is 00002000.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4 dirty entry 0.
eth0: Tx descriptor 0 is 00002000. (queue head)
eth0: Tx descriptor 1 is 00002000.
eth0: Tx descriptor 2 is 00002000.
eth0: Tx descriptor 3 is 00002000.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
Reply to: