RE: sound issues
i give in.
I've recompiled a new kernel which threw no errors just ended up in a
endless booting loop (yes I know I should have been quite so gung-ho but it
was a learning curve !)
reinstalled from scratch, not compiled in sound hardware and a day later I'm
back here again.
cat blah.wav > /dev/dsp
returns No such device
it is there, I'm in the group, the perms are correct, alsas installed, the
kernel was compiled without sound but with sound support enabled, soundcore
is in lsmod (although now it says (autoclean)(unused), sndconfig throws a
wobbler saying I dont have a kernel with sound enabled.
Has anyone ever fixed/found a workaround for this ? I have searched all
w/end and can only find the problem and no solution.
I'm happy to try recompiling again if anyone thinks that might work, (any
suggestions on which kernel-source to compile as 2.4.x went mental on me ;)
Alsa says it the most up to date version, but I cant seem to get it to do
anything.
Any pointers or anything really would be very appreciated
thanks
tim
-----Original Message-----
From: star@starshine.org [mailto:star@starshine.org]
Sent: 24 April 2003 20:59
To: Tim Gunning
Cc: 'debian-laptop@lists.debian.org'
Subject: Re: sound issues
On Thu, Apr 24, 2003 at 05:40:32PM +0100, Tim Gunning wrote:
> Hi all
>
> Ive been looking for most of the day but cant seem to find anything
> that really helps me. When KDE loads I get the "/dev/dsp cannot be
> opened debian" message, CD's play fine though, just nothing else, I
> tried "modprobe sb esstype=1788" (from another preson having this
> prob) but got device busy/resource busy, the soundcard is a ESS 1778.
> Below is the output from lsmod and lspci
> lspci:
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 85C501/2
> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 01)
> 00:01.1 IDE interface: Silicon Integrated Systems [SiS] 85C601 (rev 01)
> 00:06.0 VGA compatible controller: Trident Microsystems TGUI
9660/968x/968x
> (rev d3)
> 00:0d.0 PCMCIA bridge: Omega Micro Inc. 82C092G (rev 02)
> 00:0e.0 PCMCIA bridge: Omega Micro Inc. 82C092G (rev 02)
>
> lsmod:
> Module Size Used by
> xirc2ps_cs 12532 1
> soundcore 2452 0 (autoclean)
> ds 6048 4 [xirc2ps_cs]
> i82365 21092 4
> pcmcia_core 42408 0 [xirc2ps_cs ds i82365]
> af_packet 6152 1 (autoclean)
> ppp 20316 0 (unused)
> slhc 4384 0 [ppp]
> ip_masq_raudio 2944 0 (unused)
> ip_masq_portfw 2536 0 (unused)
> ip_masq_mfw 3156 0 (unused)
> ip_masq_irc 2064 0 (unused)
> ip_masq_ftp 3584 0 (unused)
> nfsd 159768 0 (unused)
> nfs 40556 0 (unused)
> lockd 41756 0 [nfsd nfs]
> sunrpc 57816 0 [nfsd nfs lockd]
> unix 11352 102 (autoclean)
>
> dunno if Im missing something but I cant see a sound device in there.
> I've tried using sndconfig but its asking me to recompile my kernel
> with soundcore.o (is this my whole problem ?), if so can anyone point
> me in the right direction.
It must be missing siomething else as a shim over soundcore, cuz' your lsmod
actually *has* soundcore loaded. See the second one down.
I'm booted under a kernel which has all my sound parts compiled in, but
when they were modular, I had to make sure I had my snd-* module for my
card... much like pcmcia_core doesn't make pcmcia work, you also need your
bus support to be loaded.
* Heather Stern * star@ many places...
* Starshine Technical Services -*- 800 938 4078
Reply to: