USB-Mouse... did I tried everything?
Hi list,
I've a Clevo 2200/2700c laptop with a logitech USB-optical mouse.
Seachring the web I found a few how-to's to get an USB-mouse working under linux... I tried everyone ;-)
I've build a kernel (woody / 2.4.20 - vanilla source) with
Input core support
Mouse supoort
USB
OHCI
USBHID
static compiled into it.
I made the device with
mknod /dev/input/mice c 13 63
But "cat /dev/input/mice", put out nothing. The cusor stands even when i move the mouse.
I've compiled the Kernel with USB/input core support as modules - nothing changes.
Syslog after loading the modules
-------------------------------------------------------------------------------------------------------------------------
chasta kernel: mice: PS/2 mouse device common for all mice
chasta kernel: usb.c: registered new driver hub chasta kernel: usb.c: registered new driver hid chasta kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
chasta kernel: hid-core.c: USB HID support drivers
chasta kernel: PCI: Found IRQ 11 for device 00:01.2
chasta kernel: PCI: Sharing IRQ 11 with 00:01.3
chasta kernel: usb-ohci.c: USB OHCI at membase 0xd0853000, IRQ 11
chasta kernel: usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
chasta kernel: usb.c: new USB bus registered, assigned bus number 1
chasta kernel: hub.c: USB hub found
chasta kernel: hub.c: 3 ports detected
chasta kernel: PCI: Found IRQ 11 for device 00:01.3
chasta kernel: PCI: Sharing IRQ 11 with 00:01.2
chasta kernel: usb-ohci.c: USB OHCI at membase 0xd0855000, IRQ 11
chasta kernel: usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2)
chasta kernel: usb.c: new USB bus registered, assigned bus number 2
chasta kernel: hub.c: USB hub found
chasta kernel: hub.c: 3 ports detected
chasta kernel: hub.c: new USB device 00:01.2-1, assigned address 2
chasta kernel: hub.c: USB hub found
chasta kernel: hub.c: 4 ports detected
chasta kernel: hub.c: new USB device 00:01.2-1.4, assigned address 3
chasta kernel: usb.c: USB device not accepting new address=3 (error=-110)
chasta kernel: hub.c: new USB device 00:01.2-1.4, assigned address 4
chasta kernel: usb.c: USB device 4 (vend/prod 0x557/0x2008) is not claimed by any active driver.
chasta kernel: hub.c: new USB device 00:01.3-1, assigned address 2
chasta kernel: : USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb2:2.0
-------------------------------------------------------------------------------------------------------------------------
Through the last line I guess that the mouse should work.
My Notebook hast a SIS-chipset, 2 USB connectors. On the other one, an USB-HUB with some other devices is connected.
So my question is: Do I ever get an output if I "cat /dev/input/mice" as I read.
Of'couse the mouse doesn't work on X either.
XFree4 config(assert):
-------------------------------------------------------------------------------------------------------------------------
Section "InputDevice"
Identifier "Touchpad"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "USB Mice"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "off"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "fbdev" 0 0
InputDevice "Touchpad" "CorePointer"
InputDevice "USB Mice" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
--------------------------------------------------------------------------------------------------------------
There is no Error in /var/log/XFree.0.log
(**) Option "Protocol" "PS/2"
(**) Touchpad: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Touchpad: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Touchpad: Buttons: 3
(**) Option "Emulate3Buttons" "true"
(**) Touchpad: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Touchpad: ZAxisMapping: buttons 4 and 5
(**) Option "Protocol" "IMPS/2"
(**) USB Mice: Protocol: "IMPS/2"
(**) Option "AlwaysCore"
(**) USB Mice: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) USB Mice: Buttons: 3
(**) Option "Emulate3Buttons" "off"
(**) Option "ZAxisMapping" "4 5"
(**) USB Mice: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "USB Mice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
------------------------------------------------------------------------------------------------------------------------
No changes, if I start gdm (with apropiate options).
I hope you can help me.
Thanks,
Peter
______________________________________________________________________________
E-Mails verschicken und auf Antwort warten? Mit der Kurier-SMS kann
das nicht mehr passieren - http://freemail.web.de/features/?mc=021174
Reply to: