Re: acer 634 acpi & apm + UDMA
On Sat, Dec 14, 2002 at 09:54:08PM +0100, Maximilian Pascher wrote:
> On Saturday 14 December 2002 21:28, Mattia Dongili wrote:
> > hi,
> >
> >
> > On Sat, 14 Dec 2002 21:09:06 +0100
> > Giuseppe Ciotta - <giuppi@acaro.org> wrote:
> >
> > [...]
> >
> > > ACPI: Core Subsystem version [20011018]
> >
> > ^^^^^^^^
> > you have to patch the kernel with the latest acpi patch from
> > www.sf.net/projects/acpi and recompile
> >
> > you'll have better luck :)
>
> That's exactly what I wanted to write :-)
Oh with the latest patch from acpi.sf.net all goes well :) also i can
shutdown the computer from the power button issuing a complete
shutdown -h now :)). Now i have another problem with UDMA:
Here is my lcpsi output:
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1671 Northbridge [Aladdin-P4] (rev 02)
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] PCI to AGP Controller
00:06.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device (rev 02)
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV]
00:08.0 Modem: Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:0c.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03)
00:10.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4)
00:11.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
00:13.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 02)
00:13.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 02)
00:14.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2Go] (rev b2)
and this is hdparm -i
ummagumma:/home/giuppi# hdparm -i /dev/hda
/dev/hda:
Model=IC25N020ATCS04-0, FwRev=CA2OA71A, SerialNo=CSH206D9EGPRMB
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=1768kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39070080
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: 2 3 4 5
The ide controller and the hd are both udma 100 capable and the controller
should be supported, butt all goes at UDMA33
Regards
--
Giuseppe Ciotta
emacs -batch -l vmunix.el -f init
gpg key id: 0x62C77413
Reply to: