Re: TCP configuration

[Klaas Gadeyne <Klaas.Gadeyne@mech.kuleuven.ac.be>]

> I am using Linux Debian 2.4.16  with a Dell Latitude C810.  I've a Xircom

First of al, don't you have a C810 with a build in 3com-NIC that you can 
use (driver 3c59x)??

> XE2000 (pcmcia) installed.   Everything seems to be at startup, the Xircom
> card is recognized, if I use ifconfig eth0, eveything is fine, but I can't
> see other machines on my network.  If I use Ping to other IPs nothing
> happends, it's necesary to type CTR-C  pign reports 100% packet losts.
> I'am using a static IP: 192.168.1.133.  If I use the route command it's
> displays:
> 
> 192.168.1.0     *         255.255.255   U     eth0
> default             *         0.0.0.0.             UG  eth0

This seems as you didn't set up a gateway?

normally, since your on a private network, it seems to me the route 
command should give you something like

192.168.1.0     *          255.255.255   U   0 0  eth0
default         my_gateway 0.0.0.0       UG  0 0  eth0

with my_gateway replaced by the ip-adress of your gateway?
Can you ping to other machines on the 192.168.1 subnet?

k



-- 
To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org