[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: update: PCMCIA "make all" errors

On Fri, Feb 23, 2001 at 02:58:57PM -0800, Donnie Jones wrote:
> >  -- what does your routing table look like?  
> I looked at my routing table and there is nothing
> there. This is the output from "lsmod" and I tried
> "depmod -a" and found out there are more "unresolved
> symbols" of which I was not aware. 

I agree, the problem might be the routing table.  Check it with netstat -r
(or route -n).  Mine looks like:
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface    *      UH       40 0          0 ppp0
default         UG       40 0          0 ppp0

Well that's with the modem over ppp0, but eth0 should look similar.
Is that what you checked when you said there's nothing there.

Anyway, my guess is the solution is simple: edit /etc/pcmcia/network.opts,
which is where the IP address and routing info goes.  The file should be
straightforward to follow I hope.


PGP public key available at http://dparsons.webjump.com/drewskey.txt
Fingerprint: A110 EAE1 D7D2 8076 5FE0  EC0A B6CE 7041 6412 4E4A

Reply to: