Bug#1110783: linux-image-6.12.38+deb13-amd64: Error mounting external hdd
Package: src:linux
Version: 6.12.38-1
Severity: important
X-Debbugs-Cc: joe2014knowbody@gmail.com
Dear Maintainer,
When connecting an external hard drive I get the following error from
Nautilus:
'Unable to access "MyDrive"'
This same drive on Debian 12 mounts no problem.
To get it to mount with Debian 13 I need to manually mount it with
sudo privileges, doing so, does work.
-- Package-specific info:
** Version:
Linux version 6.12.38+deb13-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.38-1 (2025-07-16)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 root=UUID=bd89d4ae-9dbc-4f51-812a-e031920b9b61 ro quiet
** Not tainted
** Kernel log:
[ 15.009535] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 15.009537] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 15.009538] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 15.009540] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 15.009541] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 15.009542] snd_hda_codec_idt hdaudioC0D0: Line=0xf
[ 15.230923] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 15.231008] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 15.231079] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 15.231149] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 15.231214] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 15.231436] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 15.231519] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 15.231583] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 18.404209] Adding 16679932k swap on /dev/sda5. Priority:-2 extents:1 across:16679932k
[ 21.267763] audit: type=1400 audit(1754895470.641:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=624 comm="apparmor_parser"
[ 21.267773] audit: type=1400 audit(1754895470.641:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=625 comm="apparmor_parser"
[ 21.267777] audit: type=1400 audit(1754895470.641:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=623 comm="apparmor_parser"
[ 21.268422] audit: type=1400 audit(1754895470.641:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=626 comm="apparmor_parser"
[ 21.409374] audit: type=1400 audit(1754895470.781:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=631 comm="apparmor_parser"
[ 21.409946] audit: type=1400 audit(1754895470.781:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=630 comm="apparmor_parser"
[ 21.409955] audit: type=1400 audit(1754895470.781:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=629 comm="apparmor_parser"
[ 21.428581] audit: type=1400 audit(1754895470.801:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=632 comm="apparmor_parser"
[ 21.429171] audit: type=1400 audit(1754895470.801:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=633 comm="apparmor_parser"
[ 21.429701] audit: type=1400 audit(1754895470.801:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=634 comm="apparmor_parser"
[ 40.553846] kauditd_printk_skb: 109 callbacks suppressed
[ 40.553851] audit: type=1400 audit(1754895489.925:121): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=718 comm="apparmor_parser"
[ 40.555439] audit: type=1400 audit(1754895489.929:122): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=718 comm="apparmor_parser"
[ 42.916418] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 42.916425] Bluetooth: BNEP filters: protocol multicast
[ 42.916430] Bluetooth: BNEP socket layer initialized
[ 42.919520] Bluetooth: MGMT ver 1.23
[ 42.970512] Bluetooth: RFCOMM TTY layer initialized
[ 42.970522] Bluetooth: RFCOMM socket layer initialized
[ 42.970530] Bluetooth: RFCOMM ver 1.11
[ 46.544285] NET: Registered PF_QIPCRTR protocol family
[ 46.921068] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 47.163073] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 47.305037] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 47.547782] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 48.342354] audit: type=1400 audit(1754895497.713:123): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=892 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 49.122986] audit: type=1400 audit(1754895498.497:124): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=892 comm="cupsd" capability=12 capname="net_admin"
[ 52.028982] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 52.270995] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 52.526912] wlo1: authenticate with d8:32:14:64:a6:4d (local address=24:77:03:61:9e:10)
[ 52.526932] wlo1: send auth to d8:32:14:64:a6:4d (try 1/3)
[ 52.529400] wlo1: authenticated
[ 52.530442] wlo1: associate with d8:32:14:64:a6:4d (try 1/3)
[ 52.534175] wlo1: RX AssocResp from d8:32:14:64:a6:4d (capab=0x411 status=0 aid=1)
[ 52.552696] wlo1: associated
[ 70.466844] rfkill: input handler disabled
[ 87.710919] rfkill: input handler enabled
[ 92.379884] rfkill: input handler disabled
[ 101.758413] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 101.977589] usb 3-2: New USB device found, idVendor=12c9, idProduct=2003, bcdDevice= 2.11
[ 101.977599] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 101.977602] usb 3-2: Product: USB Gaming Mouse
[ 101.977605] usb 3-2: Manufacturer: SOAI
[ 102.353807] hid: raw HID events driver (C) Jiri Kosina
[ 102.504814] usbcore: registered new interface driver usbhid
[ 102.504822] usbhid: USB HID core driver
[ 102.555514] input: SOAI USB Gaming Mouse as /devices/pci0000:00/0000:00:1c.7/0000:04:00.0/usb3/3-2/3-2:1.0/0003:12C9:2003.0001/input/input25
[ 102.555691] hid-generic 0003:12C9:2003.0001: input,hidraw0: USB HID v1.10 Mouse [SOAI USB Gaming Mouse] on usb-0000:04:00.0-2/input0
[ 102.555953] input: SOAI USB Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:04:00.0/usb3/3-2/3-2:1.1/0003:12C9:2003.0002/input/input26
[ 102.609573] input: SOAI USB Gaming Mouse as /devices/pci0000:00/0000:00:1c.7/0000:04:00.0/usb3/3-2/3-2:1.1/0003:12C9:2003.0002/input/input27
[ 102.609825] hid-generic 0003:12C9:2003.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [SOAI USB Gaming Mouse] on usb-0000:04:00.0-2/input1
[ 102.610131] hid-generic 0003:12C9:2003.0003: hiddev1,hidraw2: USB HID v1.10 Device [SOAI USB Gaming Mouse] on usb-0000:04:00.0-2/input2
[ 205.126990] NET: Registered PF_ALG protocol family
[ 212.198956] input: JBL GO Essential (AVRCP) as /devices/virtual/input/input28
[ 836.031666] usb 3-2: USB disconnect, device number 2
[ 838.820536] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 838.843846] usb 4-2: New USB device found, idVendor=4971, idProduct=1024, bcdDevice= 1.00
[ 838.843870] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 838.843877] usb 4-2: Product: TOURO Mobile
[ 838.843883] usb 4-2: Manufacturer: HGST
[ 838.843887] usb 4-2: SerialNumber: 21001501170002101917
[ 838.897756] usbcore: registered new interface driver usb-storage
[ 838.908916] scsi host6: uas
[ 838.909088] usbcore: registered new interface driver uas
[ 838.909855] scsi 6:0:0:0: Direct-Access HGST TOURO Mobile 0 PQ: 0 ANSI: 6
[ 838.913719] sd 6:0:0:0: [sdb] Spinning up disk...
[ 838.913922] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 839.928020] ...ready
[ 841.991444] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 841.991457] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 841.991635] sd 6:0:0:0: [sdb] Write Protect is off
[ 841.991638] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 841.991832] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 842.044487] sd 6:0:0:0: [sdb] Preferred minimum I/O size 512 bytes not a multiple of physical block size (4096 bytes)
[ 842.044508] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 842.064307] sdb: sdb1
[ 842.064575] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 843.133737] ntfs3(sdb1): It is recommened to use chkdsk.
[ 843.355363] ntfs3(sdb1): volume is dirty and "force" flag is not set!
[ 848.106444] ntfs3(sdb1): It is recommened to use chkdsk.
[ 848.166247] ntfs3(sdb1): volume is dirty and "force" flag is not set!
[ 851.350984] ntfs3(sdb1): It is recommened to use chkdsk.
[ 851.410637] ntfs3(sdb1): volume is dirty and "force" flag is not set!
[ 983.993662] ntfs3(sdb1): It is recommened to use chkdsk.
[ 984.064494] ntfs3(sdb1): volume is dirty and "force" flag is not set!
** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 8460p
product_version: A0001D02
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68SCF Ver. F.42
board_vendor: Hewlett-Packard
board_name: 161C
board_version: KBC Version 97.4D
** Configuration for modprobe:
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
blacklist microcode
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0
** Loaded modules:
ntfs3
uas
usb_storage
uinput
cmac
algif_hash
algif_skcipher
af_alg
hid_generic
usbhid
hid
snd_seq_dummy
snd_hrtimer
snd_seq
snd_seq_device
ccm
qrtr
rfcomm
bnep
binfmt_misc
snd_hda_codec_hdmi
snd_ctl_led
snd_hda_codec_idt
snd_hda_codec_generic
btusb
btrtl
iwldvm
intel_rapl_msr
btintel
intel_rapl_common
btbcm
btmtk
x86_pkg_temp_thermal
intel_powerclamp
mac80211
bluetooth
i915
coretemp
libarc4
kvm_intel
kvm
iwlwifi
irqbypass
drm_buddy
drm_display_helper
crct10dif_pclmul
crc32_pclmul
mei_wdt
ghash_clmulni_intel
mei_hdcp
mei_pxp
sha512_ssse3
sha256_ssse3
cec
sha1_ssse3
snd_hda_intel
aesni_intel
hp_wmi
xhci_pci
snd_intel_dspcfg
snd_intel_sdw_acpi
cfg80211
xhci_hcd
snd_hda_codec
iTCO_wdt
intel_pmc_bxt
gf128mul
wmi_bmof
sparse_keymap
rc_core
iTCO_vendor_support
ehci_pci
platform_profile
ttm
crypto_simd
ehci_hcd
snd_hda_core
watchdog
rfkill
cryptd
usbcore
snd_hwdep
snd_pcm
mei_me
e1000e
drm_kms_helper
mei
snd_timer
hp_accel
snd
rapl
sr_mod
lis3lv02d
intel_cstate
intel_uncore
vga16fb
joydev
cdrom
i2c_algo_bit
vgastate
soundcore
video
pcspkr
usb_common
sg
wmi
tpm_infineon
lpc_ich
battery
ac
button
msr
parport_pc
ppdev
lp
parport
drm
efi_pstore
configfs
nfnetlink
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
ahci
libahci
libata
psmouse
scsi_mod
evdev
serio_raw
crc32c_intel
scsi_common
** Network interface configuration:
*** /etc/network/interfaces:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: enp0s25: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether e4:11:5b:50:4f:98 brd ff:ff:ff:ff:ff:ff
altname enxe4115b504f98
3: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 24:77:03:61:9e:10 brd ff:ff:ff:ff:ff:ff
altname wlp3s0
altname wlx247703619e10
inet 192.168.1.2/24 brd 192.168.1.255 scope global dynamic noprefixroute wlo1
valid_lft 85302sec preferred_lft 85302sec
inet6 fe80::2677:3ff:fe61:9e10/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 5442 58 0 0 0 0 0 0 5442 58 0 0 0 0 0 0
enp0s25: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlo1: 18224197 13126 0 0 0 0 0 0 488037 4963 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 1
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
DeviceName: 32
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 39
IOMMU group: 0
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
IOMMU group: 2
Region 0: Memory at d0824000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
IOMMU group: 2
Region 0: I/O ports at 2090 [size=8]
Region 1: Memory at d082b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) [8086:1502] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
IOMMU group: 3
Region 0: Memory at d0800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d082a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 2060 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 4
Region 0: Memory at d0829000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
IOMMU group: 5
Region 0: Memory at d0820000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
IOMMU group: 6
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: d0700000-d07fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 27
IOMMU group: 7
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: d0600000-d06fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 28
IOMMU group: 8
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: d0500000-d05fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 29
IOMMU group: 9
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: d0400000-d04fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 10
Region 0: Memory at d0828000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset LPC Controller [8086:1c4f] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 11
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
IOMMU group: 11
Region 0: I/O ports at 2088 [size=8]
Region 1: I/O ports at 209c [size=4]
Region 2: I/O ports at 2080 [size=8]
Region 3: I/O ports at 2098 [size=4]
Region 4: I/O ports at 2040 [size=32]
Region 5: Memory at d0827000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e)
DeviceName: WLAN
Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1111]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 38
IOMMU group: 12
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:161c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
IOMMU group: 13
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 03f0:231d HP, Inc Broadcom 2070 Bluetooth Combo
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 002: ID 4971:1024 SimpleTech TOURO Mobile
-- System Information:
Debian Release: 13.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.12.38+deb13-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8), LANGUAGE=en_AU:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.12.38+deb13-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.148.3
ii kmod 34.2-2
ii linux-base 4.12
Versions of packages linux-image-6.12.38+deb13-amd64 recommends:
ii apparmor 4.1.0-1
Versions of packages linux-image-6.12.38+deb13-amd64 suggests:
pn debian-kernel-handbook <none>
pn firmware-linux-free <none>
ii grub-pc 2.12-9
pn linux-doc-6.12 <none>
Versions of packages linux-image-6.12.38+deb13-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-cirrus <none>
ii firmware-intel-graphics 20250410-2
pn firmware-intel-misc <none>
pn firmware-intel-sound <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20250410-2
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
pn firmware-mediatek <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
pn firmware-nvidia-graphics <none>
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: