[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#1003921: firmware-realtek: firmware does not load if intel_idle.max_cstate=1 is entered on the command line



Package: firmware-realtek
Version: 20161130-5~deb8u1
Severity: important

Dear Maintainer,

I have been trying to debug a problem with my Intel GPU. My Intel GPU
performs badly unless intel_idle.max_cstate=1 is set as a grub command
line option. However, several reboots later, I can prove that that option
is incompatible (in my environment at least) with the firmware-realtek
package in Buster (version 20210315-3).

When I upgraded to the version of firmware-realtek in buster and rebooted,
the realtek firmware that I need for my Gigabit Ethernet card failed to
load. Here are the relevant book logs from this successful boot:

[    8.789508] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[    8.790229] RTL8211DN Gigabit Ethernet r8169-0-200:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE)

Here is my relevant install of the Bullseye version of firmware-realtek:
Start-Date: 2022-01-17  19:27:36
Commandline: /usr/bin/apt-get -q install firmware-realtek
Requested-By: lfcjf (110)
Upgrade: firmware-realtek:amd64 (20161130-5~deb8u1, 20210315-3)
End-Date: 2022-01-17  19:28:01

In order to make the system boot properly, I had
to remove the firmware-realtek and install a copy of
firmware-realtek_20161130-5~deb8u1_all.deb (using dpkg -i) which I had
from a few years ago.

That older firmware package has the identical file rtl_nic/rtl8168e-2.fw
with the Bullseye version (I used dpkg-deb -x to extract the two files and
ran an md5sum to compare them). So the problem is not with the firmware
file that I need itself. The problem is with getting the firmware to
load if I have set the grub command line option intel_idle.max_cstate=1.

In the Bullseye version of the firmware-realtek package the firmware
does not load and I end up with NO network. That is a show stopper.

Here is dmesg output from this successfull boot (with the 20161130-5~deb8u1
version of the package):
Rebooted Tue Jan 18 00:05:06 EST 2022.
[    0.000000] Linux version 5.10.0-10-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.84-1 (2021-12-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=/dev/mapper/precession-root ro quiet i915.enable_dc=0 i915.disable_power_well=1 intel_idle.max_cstate=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad92fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bad93000-0x00000000badd9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000badda000-0x00000000bade0fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bade1000-0x00000000bade1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bade2000-0x00000000bae04fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae05000-0x00000000bae05fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bae06000-0x00000000bae17fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae18000-0x00000000bae24fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae25000-0x00000000bae48fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae49000-0x00000000bae8bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae8c000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: BIOSTAR Group H61MU3/H61MU3, BIOS 4.6.4 04/07/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.353 MHz processor
[    0.000832] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000835] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000843] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000848] MTRR default type: uncachable
[    0.000849] MTRR fixed ranges enabled:
[    0.000850]   00000-9FFFF write-back
[    0.000851]   A0000-BFFFF uncachable
[    0.000852]   C0000-CFFFF write-protect
[    0.000853]   D0000-E7FFF uncachable
[    0.000854]   E8000-FFFFF write-protect
[    0.000855] MTRR variable ranges enabled:
[    0.000857]   0 base 000000000 mask E00000000 write-back
[    0.000858]   1 base 200000000 mask FC0000000 write-back
[    0.000859]   2 base 0BB800000 mask FFF800000 uncachable
[    0.000860]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000861]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000862]   5 base 23FE00000 mask FFFE00000 uncachable
[    0.000863]   6 disabled
[    0.000864]   7 disabled
[    0.000864]   8 disabled
[    0.000865]   9 disabled
[    0.001449] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001684] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[    0.001690] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.012449] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf]
[    0.050381] reserving inaccessible SNB gfx pages
[    0.050688] RAMDISK: [mem 0x34159000-0x360a3fff]
[    0.050692] ACPI: Early table checksum verification disabled
[    0.050695] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.050700] ACPI: XSDT 0x00000000BADDA068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.050706] ACPI: FACP 0x00000000BADE09C8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.050712] ACPI: DSDT 0x00000000BADDA150 006876 (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.050716] ACPI: FACS 0x00000000BAE1CF80 000040
[    0.050719] ACPI: APIC 0x00000000BADE0AC0 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.050722] ACPI: SSDT 0x00000000BADE0B28 000098 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.050726] ACPI: MCFG 0x00000000BADE0BC0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.050729] ACPI: HPET 0x00000000BADE0C00 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
[    0.050733] ACPI: ASPT 0x00000000BADE0C38 000034 (v07 ALASKA PerfTune 01072009 AMI  00000000)
[    0.050736] ACPI: Reserving FACP table memory at [mem 0xbade09c8-0xbade0abb]
[    0.050738] ACPI: Reserving DSDT table memory at [mem 0xbadda150-0xbade09c5]
[    0.050738] ACPI: Reserving FACS table memory at [mem 0xbae1cf80-0xbae1cfbf]
[    0.050739] ACPI: Reserving APIC table memory at [mem 0xbade0ac0-0xbade0b21]
[    0.050740] ACPI: Reserving SSDT table memory at [mem 0xbade0b28-0xbade0bbf]
[    0.050741] ACPI: Reserving MCFG table memory at [mem 0xbade0bc0-0xbade0bfb]
[    0.050743] ACPI: Reserving HPET table memory at [mem 0xbade0c00-0xbade0c37]
[    0.050744] ACPI: Reserving ASPT table memory at [mem 0xbade0c38-0xbade0c6b]
[    0.050754] ACPI: Local APIC address 0xfee00000
[    0.050804] No NUMA configuration found
[    0.050805] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[    0.050817] NODE_DATA(0) allocated [mem 0x23fdd5000-0x23fdfefff]
[    0.051299] Zone ranges:
[    0.051300]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.051301]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.051303]   Normal   [mem 0x0000000100000000-0x000000023fdfffff]
[    0.051304]   Device   empty
[    0.051306] Movable zone start for each node
[    0.051309] Early memory node ranges
[    0.051310]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.051312]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.051313]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.051314]   node   0: [mem 0x0000000040200000-0x00000000bad92fff]
[    0.051315]   node   0: [mem 0x00000000bae05000-0x00000000bae05fff]
[    0.051315]   node   0: [mem 0x00000000bae8c000-0x00000000baffffff]
[    0.051316]   node   0: [mem 0x0000000100000000-0x000000023fdfffff]
[    0.051319] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
[    0.051320] On node 0 totalpages: 2074788
[    0.051322]   DMA zone: 64 pages used for memmap
[    0.051322]   DMA zone: 156 pages reserved
[    0.051324]   DMA zone: 3996 pages, LIFO batch:0
[    0.051325]   DMA32 zone: 11885 pages used for memmap
[    0.051326]   DMA32 zone: 760584 pages, LIFO batch:63
[    0.051327]   Normal zone: 20472 pages used for memmap
[    0.051328]   Normal zone: 1310208 pages, LIFO batch:63
[    0.051331] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.051373] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.054167] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.059581] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.059585] On node 0, zone DMA32: 114 pages in unavailable ranges
[    0.059592] On node 0, zone DMA32: 134 pages in unavailable ranges
[    0.060214] On node 0, zone Normal: 20480 pages in unavailable ranges
[    0.060225] On node 0, zone Normal: 512 pages in unavailable ranges
[    0.060243] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
[    0.060555] ACPI: PM-Timer IO Port: 0x408
[    0.060557] ACPI: Local APIC address 0xfee00000
[    0.060564] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.060575] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.060577] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.060579] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.060580] ACPI: IRQ0 used by override.
[    0.060582] ACPI: IRQ9 used by override.
[    0.060584] Using ACPI (MADT) for SMP configuration information
[    0.060585] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.060590] TSC deadline timer available
[    0.060592] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.060618] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.060620] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.060621] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.060622] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.060623] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.060625] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.060627] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.060628] PM: hibernation: Registered nosave memory: [mem 0xbad93000-0xbadd9fff]
[    0.060629] PM: hibernation: Registered nosave memory: [mem 0xbadda000-0xbade0fff]
[    0.060630] PM: hibernation: Registered nosave memory: [mem 0xbade1000-0xbade1fff]
[    0.060631] PM: hibernation: Registered nosave memory: [mem 0xbade2000-0xbae04fff]
[    0.060633] PM: hibernation: Registered nosave memory: [mem 0xbae06000-0xbae17fff]
[    0.060634] PM: hibernation: Registered nosave memory: [mem 0xbae18000-0xbae24fff]
[    0.060634] PM: hibernation: Registered nosave memory: [mem 0xbae25000-0xbae48fff]
[    0.060635] PM: hibernation: Registered nosave memory: [mem 0xbae49000-0xbae8bfff]
[    0.060637] PM: hibernation: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
[    0.060638] PM: hibernation: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
[    0.060639] PM: hibernation: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[    0.060640] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.060640] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.060641] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.060643] [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[    0.060644] Booting paravirtualized kernel on bare hardware
[    0.060648] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.065786] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.066012] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u1048576
[    0.066022] pcpu-alloc: s200536 r8192 d28840 u1048576 alloc=1*2097152
[    0.066024] pcpu-alloc: [0] 0 1 
[    0.066061] Built 1 zonelists, mobility grouping on.  Total pages: 2042211
[    0.066062] Policy zone: Normal
[    0.066064] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=/dev/mapper/precession-root ro quiet i915.enable_dc=0 i915.disable_power_well=1 intel_idle.max_cstate=1
[    0.066704] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.066987] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.067028] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.084672] Memory: 3090928K/8299152K available (12295K kernel code, 2545K rwdata, 7564K rodata, 2408K init, 3684K bss, 277528K reserved, 0K cma-reserved)
[    0.084680] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[    0.084805] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.084818] Kernel/User page tables isolation: enabled
[    0.084835] ftrace: allocating 36444 entries in 143 pages
[    0.098995] ftrace: allocated 143 pages with 5 groups
[    0.099115] rcu: Hierarchical RCU implementation.
[    0.099116] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.099117] 	Rude variant of Tasks RCU enabled.
[    0.099118] 	Tracing variant of Tasks RCU enabled.
[    0.099119] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.099120] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.103622] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.105714] Console: colour VGA+ 80x25
[    0.105728] printk: console [tty0] enabled
[    0.105743] ACPI: Core revision 20200925
[    0.105821] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.105836] APIC: Switch to symmetric I/O mode setup
[    0.106263] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.125838] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228360c9f8c, max_idle_ns: 440795245427 ns
[    0.125843] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.70 BogoMIPS (lpj=9577412)
[    0.125846] pid_max: default: 32768 minimum: 301
[    0.125871] LSM: Security Framework initializing
[    0.125881] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.125913] AppArmor: AppArmor initialized
[    0.125915] TOMOYO Linux initialized
[    0.125943] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.125959] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.126227] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.126236] process: using mwait in idle threads
[    0.126239] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.126240] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.126243] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.126245] Spectre V2 : Mitigation: Full generic retpoline
[    0.126246] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.126247] Speculative Store Bypass: Vulnerable
[    0.126249] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.126354] Freeing SMP alternatives memory: 32K
[    0.129937] smpboot: CPU0: Intel(R) Celeron(R) CPU G530 @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.130094] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.130103] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.130105] ... version:                3
[    0.130106] ... bit width:              48
[    0.130107] ... generic registers:      8
[    0.130108] ... value mask:             0000ffffffffffff
[    0.130108] ... max period:             00007fffffffffff
[    0.130109] ... fixed-purpose events:   3
[    0.130110] ... event mask:             00000007000000ff
[    0.130258] rcu: Hierarchical SRCU implementation.
[    0.130789] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.130841] smp: Bringing up secondary CPUs ...
[    0.130947] x86: Booting SMP configuration:
[    0.130949] .... node  #0, CPUs:      #1
[    0.133216] smp: Brought up 1 node, 2 CPUs
[    0.133216] smpboot: Max logical packages: 1
[    0.133216] smpboot: Total of 2 processors activated (9577.41 BogoMIPS)
[    0.146406] node 0 deferred pages initialised in 12ms
[    0.146443] devtmpfs: initialized
[    0.146443] x86/mm: Memory block size: 128MB
[    0.146626] PM: Registering ACPI NVS region [mem 0xbad93000-0xbadd9fff] (290816 bytes)
[    0.146626] PM: Registering ACPI NVS region [mem 0xbade1000-0xbade1fff] (4096 bytes)
[    0.146626] PM: Registering ACPI NVS region [mem 0xbae18000-0xbae24fff] (53248 bytes)
[    0.146626] PM: Registering ACPI NVS region [mem 0xbae49000-0xbae8bfff] (274432 bytes)
[    0.146626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.146626] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.146626] pinctrl core: initialized pinctrl subsystem
[    0.146626] NET: Registered protocol family 16
[    0.146626] audit: initializing netlink subsys (disabled)
[    0.146626] audit: type=2000 audit(1642482295.040:1): state=initialized audit_enabled=0 res=1
[    0.146626] thermal_sys: Registered thermal governor 'fair_share'
[    0.146626] thermal_sys: Registered thermal governor 'bang_bang'
[    0.146626] thermal_sys: Registered thermal governor 'step_wise'
[    0.146626] thermal_sys: Registered thermal governor 'user_space'
[    0.146626] thermal_sys: Registered thermal governor 'power_allocator'
[    0.146626] cpuidle: using governor ladder
[    0.146626] cpuidle: using governor menu
[    0.146626] ACPI: bus type PCI registered
[    0.146626] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.146626] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.146626] PCI: not using MMCONFIG
[    0.146626] PCI: Using configuration type 1 for base access
[    0.146626] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.146626] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.150411] Kprobes globally optimized
[    0.150416] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.350136] ACPI: Added _OSI(Module Device)
[    0.350136] ACPI: Added _OSI(Processor Device)
[    0.350136] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.350136] ACPI: Added _OSI(Processor Aggregator Device)
[    0.350136] ACPI: Added _OSI(Linux-Dell-Video)
[    0.350136] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.350136] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.355797] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.356621] ACPI: Dynamic OEM Table Load:
[    0.356626] ACPI: SSDT 0xFFFF8A7D2A6E3A00 0001D8 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.356943] ACPI: Dynamic OEM Table Load:
[    0.356946] ACPI: SSDT 0xFFFF8A7C00397420 000054 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.357813] ACPI: Interpreter enabled
[    0.357827] ACPI: (supports S0 S4 S5)
[    0.357828] ACPI: Using IOAPIC for interrupt routing
[    0.357858] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.357922] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.357928] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.358281] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.358585] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.358763] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.364038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.364044] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.364182] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.364309] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.364563] PCI host bridge to bus 0000:00
[    0.364566] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.364567] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.364569] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.364570] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.364571] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.364572] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.364574] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[    0.364575] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.364588] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.364676] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.364715] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.364806] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.364815] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.364820] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.364825] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.364940] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.364961] pci 0000:00:16.0: reg 0x10: [mem 0xfe608000-0xfe60800f 64bit]
[    0.365038] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.365126] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.365143] pci 0000:00:1a.0: reg 0x10: [mem 0xfe607000-0xfe6073ff]
[    0.365231] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.365325] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.365343] pci 0000:00:1b.0: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[    0.365426] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.365509] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.365604] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.365709] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.365804] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.365914] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[    0.366010] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.366117] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.366135] pci 0000:00:1d.0: reg 0x10: [mem 0xfe606000-0xfe6063ff]
[    0.366222] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.366315] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.366504] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.366519] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.366527] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.366535] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.366543] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.366551] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.366560] pci 0000:00:1f.2: reg 0x24: [mem 0xfe605000-0xfe6057ff]
[    0.366603] pci 0000:00:1f.2: PME# supported from D3hot
[    0.366685] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.366704] pci 0000:00:1f.3: reg 0x10: [mem 0xfe604000-0xfe6040ff 64bit]
[    0.366726] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.366839] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.366989] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.367077] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.367197] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.367271] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.367719] pci 0000:02:00.0: supports D1 D2
[    0.367721] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.368136] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.368141] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.368149] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.368230] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.368274] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
[    0.368491] pci 0000:03:00.0: PME# supported from D3hot
[    0.368616] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.368623] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.368705] pci 0000:04:00.0: [1283:8893] type 01 class 0x060401
[    0.368905] pci 0000:04:00.0: supports D1 D2
[    0.368906] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.368974] pci 0000:00:1c.2: PCI bridge to [bus 04-05] (subtractive decode)
[    0.368979] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.368983] pci 0000:00:1c.2:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.368989] pci 0000:00:1c.2:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.368990] pci 0000:00:1c.2:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.368992] pci 0000:00:1c.2:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.368993] pci 0000:00:1c.2:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.368994] pci 0000:00:1c.2:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.368996] pci 0000:00:1c.2:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.368997] pci 0000:00:1c.2:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[    0.369057] pci_bus 0000:05: extended config space not accessible
[    0.369092] pci 0000:05:00.0: [10b8:0005] type 00 class 0x020000
[    0.369135] pci 0000:05:00.0: reg 0x10: [io  0xd100-0xd1ff]
[    0.369159] pci 0000:05:00.0: reg 0x14: [mem 0xfe431000-0xfe431fff]
[    0.369270] pci 0000:05:00.0: reg 0x30: [mem 0xfe420000-0xfe42ffff pref]
[    0.369344] pci 0000:05:00.0: supports D1 D2
[    0.369345] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[    0.369424] pci 0000:05:01.0: [d161:8005] type 00 class 0x020000
[    0.369467] pci 0000:05:01.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.369492] pci 0000:05:01.0: reg 0x14: [mem 0xfe430000-0xfe4303ff]
[    0.369604] pci 0000:05:01.0: reg 0x30: [mem 0xfe400000-0xfe41ffff pref]
[    0.369678] pci 0000:05:01.0: supports D1 D2
[    0.369679] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.369832] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.369846] pci 0000:04:00.0:   bridge window [io  0xd000-0xdfff]
[    0.369854] pci 0000:04:00.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.369868] pci 0000:04:00.0:   bridge window [io  0xd000-0xdfff] (subtractive decode)
[    0.369869] pci 0000:04:00.0:   bridge window [mem 0xfe400000-0xfe4fffff] (subtractive decode)
[    0.369870] pci 0000:04:00.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.369872] pci 0000:04:00.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.369873] pci 0000:04:00.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.369874] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.369876] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.369877] pci 0000:04:00.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.369878] pci 0000:04:00.0:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[    0.370509] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.370564] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.370616] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.370668] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12 14 15)
[    0.370719] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.370771] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.370824] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.370876] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.371012] iommu: Default domain type: Translated 
[    0.371032] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.371032] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.371032] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.371032] vgaarb: loaded
[    0.371032] EDAC MC: Ver: 3.0.0
[    0.371032] NetLabel: Initializing
[    0.371032] NetLabel:  domain hash size = 128
[    0.371032] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.371032] NetLabel:  unlabeled traffic allowed by default
[    0.371032] PCI: Using ACPI for IRQ routing
[    0.378262] PCI: pci_cache_line_size set to 64 bytes
[    0.378340] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.378342] e820: reserve RAM buffer [mem 0xbad93000-0xbbffffff]
[    0.378344] e820: reserve RAM buffer [mem 0xbae06000-0xbbffffff]
[    0.378345] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.378346] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    0.378385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.378391] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.380415] clocksource: Switched to clocksource tsc-early
[    0.389530] VFS: Disk quotas dquot_6.6.0
[    0.389547] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.389676] AppArmor: AppArmor Filesystem Enabled
[    0.389698] pnp: PnP ACPI init
[    0.389848] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.389850] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.389852] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.389853] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.389855] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.389863] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.389994] system 00:01: [io  0x0a00-0x0a0f] has been reserved
[    0.389997] system 00:01: [io  0x0a30-0x0a3f] has been reserved
[    0.389999] system 00:01: [io  0x0a20-0x0a2f] has been reserved
[    0.390003] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.390297] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.390352] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.390357] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.390499] pnp 00:04: [dma 0 disabled]
[    0.390547] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.390714] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.390715] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.390717] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.390718] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.390720] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.390722] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.390724] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.390725] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.390730] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.390789] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.390793] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.390975] pnp: PnP ACPI: found 7 devices
[    0.396935] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.397001] NET: Registered protocol family 2
[    0.397126] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.398528] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.398587] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.398793] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.398906] TCP: Hash tables configured (established 65536 bind 65536)
[    0.398962] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.398997] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.399422] NET: Registered protocol family 1
[    0.399429] NET: Registered protocol family 44
[    0.399450] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.399457] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.399461] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.399468] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.399475] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.399480] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.399489] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.399493] pci 0000:04:00.0:   bridge window [io  0xd000-0xdfff]
[    0.399504] pci 0000:04:00.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.399524] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.399527] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.399532] pci 0000:00:1c.2:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.399541] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.399542] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.399543] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.399545] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.399546] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.399547] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.399549] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[    0.399550] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.399552] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.399553] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.399554] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.399556] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.399557] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    0.399558] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    0.399559] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    0.399560] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.399562] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.399563] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.399564] pci_bus 0000:04: resource 10 [mem 0xbfa00000-0xffffffff window]
[    0.399566] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.399567] pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.399568] pci_bus 0000:05: resource 4 [io  0xd000-0xdfff]
[    0.399569] pci_bus 0000:05: resource 5 [mem 0xfe400000-0xfe4fffff]
[    0.399570] pci_bus 0000:05: resource 6 [io  0x0000-0x03af window]
[    0.399572] pci_bus 0000:05: resource 7 [io  0x03e0-0x0cf7 window]
[    0.399573] pci_bus 0000:05: resource 8 [io  0x03b0-0x03df window]
[    0.399574] pci_bus 0000:05: resource 9 [io  0x0d00-0xffff window]
[    0.399575] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.399577] pci_bus 0000:05: resource 11 [mem 0x000c0000-0x000dffff window]
[    0.399578] pci_bus 0000:05: resource 12 [mem 0xbfa00000-0xffffffff window]
[    0.399659] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.399674] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.400141] PCI: CLS 64 bytes, default 64
[    0.400197] Trying to unpack rootfs image as initramfs...
[    0.976187] Freeing initrd memory: 32044K
[    0.976196] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.976198] software IO TLB: mapped [mem 0x00000000b6d93000-0x00000000bad93000] (64MB)
[    0.976635] Initialise system trusted keyrings
[    0.976645] Key type blacklist registered
[    0.976700] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.977919] zbud: loaded
[    0.978096] integrity: Platform Keyring initialized
[    0.978099] Key type asymmetric registered
[    0.978100] Asymmetric key parser 'x509' registered
[    0.978109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.978159] io scheduler mq-deadline registered
[    0.978392] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[    0.978560] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[    0.978672] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[    0.978837] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
[    0.978924] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.978935] intel_idle: MWAIT substates: 0x1120
[    0.978937] intel_idle: v0.5.1 model 0x2A
[    0.978939] intel_idle: max_cstate 1 reached
[    0.978987] intel_idle: Local APIC timer is reliable in all C-states
[    0.979594] thermal LNXTHERM:00: registered as thermal_zone0
[    0.979595] ACPI: Thermal Zone [THRM] (35 C)
[    0.979712] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.979874] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.980608] Linux agpgart interface v0.103
[    0.980645] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.980784] i8042: PNP: No PS/2 controller found.
[    0.980836] mousedev: PS/2 mouse device common for all mice
[    0.980870] rtc_cmos 00:02: RTC can wake from S4
[    0.981068] rtc_cmos 00:02: registered as rtc0
[    0.981098] rtc_cmos 00:02: setting system clock to 2022-01-18T05:04:56 UTC (1642482296)
[    0.981113] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.981123] intel_pstate: Intel P-state driver initializing
[    0.981242] ledtrig-cpu: registered to indicate activity on CPUs
[    0.981584] NET: Registered protocol family 10
[    0.989959] Segment Routing with IPv6
[    0.989987] mip6: Mobile IPv6
[    0.989990] NET: Registered protocol family 17
[    0.990027] mpls_gso: MPLS GSO support
[    0.990196] microcode: sig=0x206a7, pf=0x2, revision=0x14
[    0.990205] microcode: Microcode Update Driver: v2.2.
[    0.990210] IPI shorthand broadcast: enabled
[    0.990218] sched_clock: Marking stable (988126423, 2004944)->(1215598138, -225466771)
[    0.990304] registered taskstats version 1
[    0.990306] Loading compiled-in X.509 certificates
[    1.036670] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.036690] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    1.036712] zswap: loaded using pool lzo/zbud
[    1.036821] Key type ._fscrypt registered
[    1.036822] Key type .fscrypt registered
[    1.036823] Key type fscrypt-provisioning registered
[    1.036862] AppArmor: AppArmor sha1 policy hashing enabled
[    1.038510] Freeing unused kernel image (initmem) memory: 2408K
[    1.057857] Write protecting the kernel read-only data: 22528k
[    1.058329] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.058476] Freeing unused kernel image (rodata/data gap) memory: 628K
[    1.124403] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.124405] x86/mm: Checking user space page tables
[    1.184322] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.184330] Run /init as init process
[    1.184331]   with arguments:
[    1.184332]     /init
[    1.184333]   with environment:
[    1.184334]     HOME=/
[    1.184335]     TERM=linux
[    1.184335]     BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64
[    1.270083] epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>  (unofficial 2.4.x kernel port, version 2.1, Sept 11, 2006)
[    1.270450] epic100 0000:05:00.0: MII transceiver #3 control 3000 status 7849.
[    1.271442] epic100 0000:05:00.0: Autonegotiation advertising 01e1 link partner 0001.
[    1.271602] epic100 0000:05:00.0 eth0: SMSC EPIC/100 83c170 at d100, IRQ 18, 00:e0:29:62:43:c0
[    1.278470] ACPI: bus type USB registered
[    1.278493] usbcore: registered new interface driver usbfs
[    1.278501] usbcore: registered new interface driver hub
[    1.278513] usbcore: registered new device driver usb
[    1.283356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.284185] ehci-pci: EHCI PCI platform driver
[    1.284317] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.284324] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.284342] ehci-pci 0000:00:1a.0: debug port 2
[    1.287810] SCSI subsystem initialized
[    1.288256] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.288288] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe607000
[    1.298348] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.298739] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    1.301873] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.301936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.301938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.301939] usb usb1: Product: EHCI Host Controller
[    1.301941] usb usb1: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd
[    1.301942] usb usb1: SerialNumber: 0000:00:1a.0
[    1.302073] hub 1-0:1.0: USB hub found
[    1.302081] hub 1-0:1.0: 2 ports detected
[    1.302285] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.302348] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.302355] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.302368] ehci-pci 0000:00:1d.0: debug port 2
[    1.302953] i2c i2c-0: Successfully instantiated SPD at 0x52
[    1.306292] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.317697] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe606000
[    1.330293] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.330523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.330525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.330527] usb usb2: Product: EHCI Host Controller
[    1.330528] usb usb2: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd
[    1.330529] usb usb2: SerialNumber: 0000:00:1d.0
[    1.330821] hub 2-0:1.0: USB hub found
[    1.330987] hub 2-0:1.0: 2 ports detected
[    1.334907] epic100 0000:05:00.0 eth1: renamed from eth0
[    1.343437] libphy: r8169: probed
[    1.347200] libata version 3.00 loaded.
[    1.349205] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.349214] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    1.353515] ahci 0000:00:1f.2: version 3.0
[    1.353764] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.353767] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.354033] r8169 0000:02:00.0 eth0: RTL8168e/8111e, 00:30:67:c4:67:6f, XID 2c2, IRQ 28
[    1.354035] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.356382] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[    1.356634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.356636] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.356637] usb usb3: Product: xHCI Host Controller
[    1.356638] usb usb3: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[    1.356639] usb usb3: SerialNumber: 0000:03:00.0
[    1.356762] hub 3-0:1.0: USB hub found
[    1.356774] hub 3-0:1.0: 2 ports detected
[    1.356935] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.356939] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    1.356942] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[    1.361399] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.361422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.361423] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.361425] usb usb4: Product: xHCI Host Controller
[    1.361426] usb usb4: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[    1.361427] usb usb4: SerialNumber: 0000:03:00.0
[    1.361538] hub 4-0:1.0: USB hub found
[    1.361549] hub 4-0:1.0: 2 ports detected
[    1.394412] scsi host0: ahci
[    1.394566] scsi host1: ahci
[    1.394684] scsi host2: ahci
[    1.394794] scsi host3: ahci
[    1.394912] scsi host4: ahci
[    1.395026] scsi host5: ahci
[    1.395076] ata1: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605100 irq 29
[    1.395079] ata2: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605180 irq 29
[    1.395080] ata3: DUMMY
[    1.395081] ata4: DUMMY
[    1.395083] ata5: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605300 irq 29
[    1.395086] ata6: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605380 irq 29
[    1.557850] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.585848] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.707967] ata5: SATA link down (SStatus 0 SControl 300)
[    1.707989] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.708006] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.708020] ata6: SATA link down (SStatus 0 SControl 300)
[    1.709606] ata1.00: ATA-8: WDC WD2002FAEX-00MJRA0, 01.01L01, max UDMA/133
[    1.709608] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.710476] ata1.00: configured for UDMA/133
[    1.710573] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2002FAEX-0 1L01 PQ: 0 ANSI: 5
[    1.726241] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.726243] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.726482] hub 1-1:1.0: USB hub found
[    1.726616] hub 1-1:1.0: 4 ports detected
[    1.745276] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[    1.745278] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.746246] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.746250] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.746559] hub 2-1:1.0: USB hub found
[    1.746752] hub 2-1:1.0: 6 ports detected
[    1.794892] ata2.00: configured for UDMA/133
[    1.795032] scsi 1:0:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[    1.805626] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.805633] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.805636] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.805639] sd 0:0:0:0: [sda] Write Protect is off
[    1.805641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.805646] sd 1:0:0:0: [sdb] Write Protect is off
[    1.805648] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.805659] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.805665] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.845925]  sda: sda1 sda2
[    1.847816]  sdb: sdb1 sdb2
[    1.861963] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.861977] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.993868] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    1.993877] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
[    1.993918] clocksource: Switched to clocksource tsc
[    2.013869] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.021455] md/raid1:md0: active with 2 out of 2 mirrors
[    2.021478] md0: detected capacity change from 0 to 1995264819200
[    2.028954] random: fast init done
[    2.081229] random: lvm: uninitialized urandom read (4 bytes read)
[    2.111560] device-mapper: uevent: version 1.0.3
[    2.111656] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    2.112691] random: lvm: uninitialized urandom read (2 bytes read)
[    2.123402] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=8d11, bcdDevice= 1.00
[    2.123406] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.123407] usb 1-1.1: Product: Photosmart D110 series
[    2.123408] usb 1-1.1: Manufacturer: HP
[    2.123410] usb 1-1.1: SerialNumber: CN13SG31BH05N9
[    2.130118] usb-storage 1-1.1:1.3: USB Mass Storage device detected
[    2.130353] scsi host6: usb-storage 1-1.1:1.3
[    2.130439] usbcore: registered new interface driver usb-storage
[    2.132333] usbcore: registered new interface driver uas
[    2.209853] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[    2.324136] usb 1-1.3: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[    2.324139] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.324141] usb 1-1.3: Product: Dell USB Keyboard
[    2.324142] usb 1-1.3: Manufacturer: Dell
[    2.332765] hid: raw HID events driver (C) Jiri Kosina
[    2.339877] usbcore: registered new interface driver usbhid
[    2.339879] usbhid: USB HID core driver
[    2.341704] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0001/input/input0
[    2.397982] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[    2.401859] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[    2.515012] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[    2.515015] usb 1-1.4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.515017] usb 1-1.4: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[    2.515018] usb 1-1.4: Manufacturer: Microsoft
[    2.517873] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:0040.0002/input/input1
[    2.517951] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.4/input0
[    2.873847] raid6: sse2x4   gen()  9500 MB/s
[    2.941843] raid6: sse2x4   xor()  5457 MB/s
[    3.009843] raid6: sse2x2   gen() 11514 MB/s
[    3.077843] raid6: sse2x2   xor()  6274 MB/s
[    3.145847] raid6: sse2x1   gen()  9134 MB/s
[    3.146520] scsi 6:0:0:0: Direct-Access     HP       Photosmart D110  1.00 PQ: 0 ANSI: 5
[    3.213844] raid6: sse2x1   xor()  5702 MB/s
[    3.213845] raid6: using algorithm sse2x2 gen() 11514 MB/s
[    3.213846] raid6: .... xor() 6274 MB/s, rmw enabled
[    3.213848] raid6: using ssse3x2 recovery algorithm
[    3.214882] xor: measuring software checksum speed
[    3.215575]    prefetch64-sse  : 14251 MB/sec
[    3.216325]    generic_sse     : 13124 MB/sec
[    3.216326] xor: using function: prefetch64-sse (14251 MB/sec)
[    3.217049] async_tx: api initialized (async)
[    3.248775] random: lvm: uninitialized urandom read (4 bytes read)
[    3.258647] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.336094] random: lvm: uninitialized urandom read (4 bytes read)
[    3.392799] PM: Image not found (code -22)
[    3.565943] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.711494] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    3.852045] random: crng init done
[    4.462820] systemd[1]: Inserted module 'autofs4'
[    4.565582] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.581923] systemd[1]: Detected architecture x86-64.
[    4.598634] systemd[1]: Set hostname to <precession>.
[    5.656693] systemd[1]: Queued start job for default target Graphical Interface.
[    5.657762] systemd[1]: Created slice system-getty.slice.
[    5.658087] systemd[1]: Created slice system-modprobe.slice.
[    5.658386] systemd[1]: Created slice system-postfix.slice.
[    5.658626] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.658846] systemd[1]: Created slice User and Session Slice.
[    5.658978] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.659042] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.659225] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.659287] systemd[1]: Reached target Local Encrypted Volumes.
[    5.659338] systemd[1]: Reached target Slices.
[    5.659361] systemd[1]: Reached target TLS tunnels for network services - per-config-file target.
[    5.659463] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.667465] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.677430] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.683268] systemd[1]: Listening on Syslog Socket.
[    5.683391] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.683473] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.683658] systemd[1]: Listening on Journal Audit Socket.
[    5.683767] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.683895] systemd[1]: Listening on Journal Socket.
[    5.684044] systemd[1]: Listening on udev Control Socket.
[    5.684137] systemd[1]: Listening on udev Kernel Socket.
[    5.685010] systemd[1]: Mounting Huge Pages File System...
[    5.685988] systemd[1]: Mounting POSIX Message Queue File System...
[    5.687127] systemd[1]: Mounting Kernel Debug File System...
[    5.688128] systemd[1]: Mounting Kernel Trace File System...
[    5.688363] systemd[1]: Finished Availability of block devices.
[    5.689467] systemd[1]: Starting Set the console keyboard layout...
[    5.690521] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    5.691485] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.692766] systemd[1]: Starting Load Kernel Module configfs...
[    5.693916] systemd[1]: Starting Load Kernel Module drm...
[    5.694988] systemd[1]: Starting Load Kernel Module fuse...
[    5.702042] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    5.702116] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    5.704078] systemd[1]: Starting Journal Service...
[    5.711980] systemd[1]: Starting Load Kernel Modules...
[    5.712946] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.714059] systemd[1]: Starting Coldplug All udev Devices...
[    5.720544] systemd[1]: Mounted Huge Pages File System.
[    5.720685] systemd[1]: Mounted POSIX Message Queue File System.
[    5.720785] systemd[1]: Mounted Kernel Debug File System.
[    5.720880] systemd[1]: Mounted Kernel Trace File System.
[    5.721128] systemd[1]: modprobe@configfs.service: Succeeded.
[    5.721368] systemd[1]: Finished Load Kernel Module configfs.
[    5.722994] systemd[1]: Mounting Kernel Configuration File System...
[    5.724252] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    5.733222] systemd[1]: Mounted Kernel Configuration File System.
[    5.779404] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    5.805980] fuse: init (API version 7.32)
[    5.806709] systemd[1]: modprobe@fuse.service: Succeeded.
[    5.806999] systemd[1]: Finished Load Kernel Module fuse.
[    5.808044] systemd[1]: Mounting FUSE Control File System...
[    5.811767] systemd[1]: Mounted FUSE Control File System.
[    5.818339] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    5.819405] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.841381] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    5.842430] systemd[1]: Starting Create System Users...
[    5.853310] systemd[1]: modprobe@drm.service: Succeeded.
[    5.853551] systemd[1]: Finished Load Kernel Module drm.
[    5.920522] systemd[1]: Started Journal Service.
[    6.069910] loop: module loaded
[    6.418926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.433937] ACPI: Power Button [PWRB]
[    6.434013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.434057] ACPI: Power Button [PWRF]
[    6.454796] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.454831] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.454862] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    6.496536] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.526384] at24 0-0050: supply vcc not found, using dummy regulator
[    6.527623] at24 0-0050: 256 byte spd EEPROM, read-only
[    6.527656] at24 0-0052: supply vcc not found, using dummy regulator
[    6.528259] at24 0-0052: 256 byte spd EEPROM, read-only
[    6.598193] iTCO_vendor_support: vendor-support=0
[    6.605202] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.605250] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    6.605367] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.632727] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    6.632730] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    6.632731] RAPL PMU: hw unit of domain package 2^-16 Joules
[    6.632732] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    6.646461] cryptd: max_cpu_qlen set to 1000
[    6.806550] Setting dangerous option enable_dc - tainting kernel
[    6.806554] Setting dangerous option disable_power_well - tainting kernel
[    6.807352] i915 0000:00:02.0: vgaarb: deactivate vga console
[    6.807769] Console: switching to colour dummy device 80x25
[    6.809089] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.830282] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[    6.956767] usblp 1-1.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8D11
[    6.956804] usbcore: registered new interface driver usblp
[    6.984263] fbcon: i915drmfb (fb0) is primary device
[    7.085524] Console: switching to colour frame buffer device 240x67
[    7.106537] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    7.161229] intel_rapl_common: Found RAPL domain package
[    7.161232] intel_rapl_common: Found RAPL domain core
[    7.161233] intel_rapl_common: Found RAPL domain uncore
[    7.349390] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.440966] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
[    7.441746] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.441749] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.441750] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.441752] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    7.441753] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    7.441754] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    7.441756] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    7.441757] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    7.441758] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    7.505857] Adding 409596k swap on /dev/mapper/precession-swap.  Priority:-2 extents:1 across:409596k FS
[    7.530580] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    7.530632] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.530680] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.530728] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.530774] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.531364] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.585437] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[    7.585447] ext2 filesystem being mounted at /tmp supports timestamps until 2038 (0x7fffffff)
[    7.727858] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    7.788729] systemd-journald[279]: Received client request to flush runtime journal.
[    8.215490] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[    8.595527] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    8.789508] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[    8.790229] RTL8211DN Gigabit Ethernet r8169-0-200:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE)
[    9.038934] r8169 0000:02:00.0 eth0: Link is Down
[    9.743136] Process accounting resumed

Here is the dmesg output from my previous boot which used the firmware-realtek
package from bullseye (20210315-3) and resulted in No Network:
Rebooted Tue Jan 18 00:02:05 EST 2022.
[    0.000000] Linux version 5.10.0-10-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.84-1 (2021-12-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=/dev/mapper/precession-root ro quiet i915.enable_dc=0 i915.disable_power_well=1 intel_idle.max_cstate=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad92fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bad93000-0x00000000badd9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000badda000-0x00000000bade0fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bade1000-0x00000000bade1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bade2000-0x00000000bae04fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae05000-0x00000000bae05fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bae06000-0x00000000bae17fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae18000-0x00000000bae24fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae25000-0x00000000bae48fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae49000-0x00000000bae8bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae8c000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: BIOSTAR Group H61MU3/H61MU3, BIOS 4.6.4 04/07/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.534 MHz processor
[    0.000831] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000834] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000842] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000847] MTRR default type: uncachable
[    0.000848] MTRR fixed ranges enabled:
[    0.000849]   00000-9FFFF write-back
[    0.000850]   A0000-BFFFF uncachable
[    0.000851]   C0000-CFFFF write-protect
[    0.000852]   D0000-E7FFF uncachable
[    0.000853]   E8000-FFFFF write-protect
[    0.000854] MTRR variable ranges enabled:
[    0.000855]   0 base 000000000 mask E00000000 write-back
[    0.000857]   1 base 200000000 mask FC0000000 write-back
[    0.000858]   2 base 0BB800000 mask FFF800000 uncachable
[    0.000859]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000860]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000861]   5 base 23FE00000 mask FFFE00000 uncachable
[    0.000862]   6 disabled
[    0.000863]   7 disabled
[    0.000863]   8 disabled
[    0.000864]   9 disabled
[    0.001448] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001682] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[    0.001689] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.012448] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf]
[    0.050298] reserving inaccessible SNB gfx pages
[    0.050704] RAMDISK: [mem 0x34159000-0x360a3fff]
[    0.050707] ACPI: Early table checksum verification disabled
[    0.050710] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.050715] ACPI: XSDT 0x00000000BADDA068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.050721] ACPI: FACP 0x00000000BADE09C8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.050727] ACPI: DSDT 0x00000000BADDA150 006876 (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.050731] ACPI: FACS 0x00000000BAE1CF80 000040
[    0.050734] ACPI: APIC 0x00000000BADE0AC0 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.050738] ACPI: SSDT 0x00000000BADE0B28 000098 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.050741] ACPI: MCFG 0x00000000BADE0BC0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.050745] ACPI: HPET 0x00000000BADE0C00 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
[    0.050748] ACPI: ASPT 0x00000000BADE0C38 000034 (v07 ALASKA PerfTune 01072009 AMI  00000000)
[    0.050752] ACPI: Reserving FACP table memory at [mem 0xbade09c8-0xbade0abb]
[    0.050753] ACPI: Reserving DSDT table memory at [mem 0xbadda150-0xbade09c5]
[    0.050754] ACPI: Reserving FACS table memory at [mem 0xbae1cf80-0xbae1cfbf]
[    0.050755] ACPI: Reserving APIC table memory at [mem 0xbade0ac0-0xbade0b21]
[    0.050756] ACPI: Reserving SSDT table memory at [mem 0xbade0b28-0xbade0bbf]
[    0.050757] ACPI: Reserving MCFG table memory at [mem 0xbade0bc0-0xbade0bfb]
[    0.050758] ACPI: Reserving HPET table memory at [mem 0xbade0c00-0xbade0c37]
[    0.050759] ACPI: Reserving ASPT table memory at [mem 0xbade0c38-0xbade0c6b]
[    0.050770] ACPI: Local APIC address 0xfee00000
[    0.050819] No NUMA configuration found
[    0.050820] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[    0.050833] NODE_DATA(0) allocated [mem 0x23fdd2000-0x23fdfbfff]
[    0.051314] Zone ranges:
[    0.051315]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.051316]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.051318]   Normal   [mem 0x0000000100000000-0x000000023fdfffff]
[    0.051319]   Device   empty
[    0.051321] Movable zone start for each node
[    0.051324] Early memory node ranges
[    0.051325]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.051327]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.051328]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.051328]   node   0: [mem 0x0000000040200000-0x00000000bad92fff]
[    0.051330]   node   0: [mem 0x00000000bae05000-0x00000000bae05fff]
[    0.051330]   node   0: [mem 0x00000000bae8c000-0x00000000baffffff]
[    0.051331]   node   0: [mem 0x0000000100000000-0x000000023fdfffff]
[    0.051333] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
[    0.051336] On node 0 totalpages: 2074788
[    0.051337]   DMA zone: 64 pages used for memmap
[    0.051338]   DMA zone: 156 pages reserved
[    0.051339]   DMA zone: 3996 pages, LIFO batch:0
[    0.051341]   DMA32 zone: 11885 pages used for memmap
[    0.051341]   DMA32 zone: 760584 pages, LIFO batch:63
[    0.051342]   Normal zone: 20472 pages used for memmap
[    0.051343]   Normal zone: 1310208 pages, LIFO batch:63
[    0.051347] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.051388] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.054185] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.059600] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.059604] On node 0, zone DMA32: 114 pages in unavailable ranges
[    0.059611] On node 0, zone DMA32: 134 pages in unavailable ranges
[    0.060237] On node 0, zone Normal: 20480 pages in unavailable ranges
[    0.060246] On node 0, zone Normal: 512 pages in unavailable ranges
[    0.060265] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
[    0.060571] ACPI: PM-Timer IO Port: 0x408
[    0.060574] ACPI: Local APIC address 0xfee00000
[    0.060580] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.060592] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.060594] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.060596] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.060597] ACPI: IRQ0 used by override.
[    0.060598] ACPI: IRQ9 used by override.
[    0.060601] Using ACPI (MADT) for SMP configuration information
[    0.060602] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.060607] TSC deadline timer available
[    0.060609] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.060635] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.060638] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.060638] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.060639] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.060640] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.060642] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.060644] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.060646] PM: hibernation: Registered nosave memory: [mem 0xbad93000-0xbadd9fff]
[    0.060647] PM: hibernation: Registered nosave memory: [mem 0xbadda000-0xbade0fff]
[    0.060648] PM: hibernation: Registered nosave memory: [mem 0xbade1000-0xbade1fff]
[    0.060648] PM: hibernation: Registered nosave memory: [mem 0xbade2000-0xbae04fff]
[    0.060650] PM: hibernation: Registered nosave memory: [mem 0xbae06000-0xbae17fff]
[    0.060651] PM: hibernation: Registered nosave memory: [mem 0xbae18000-0xbae24fff]
[    0.060652] PM: hibernation: Registered nosave memory: [mem 0xbae25000-0xbae48fff]
[    0.060653] PM: hibernation: Registered nosave memory: [mem 0xbae49000-0xbae8bfff]
[    0.060655] PM: hibernation: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
[    0.060656] PM: hibernation: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
[    0.060656] PM: hibernation: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[    0.060657] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.060658] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.060659] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.060661] [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[    0.060662] Booting paravirtualized kernel on bare hardware
[    0.060665] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.065814] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.066031] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u1048576
[    0.066042] pcpu-alloc: s200536 r8192 d28840 u1048576 alloc=1*2097152
[    0.066044] pcpu-alloc: [0] 0 1 
[    0.066081] Built 1 zonelists, mobility grouping on.  Total pages: 2042211
[    0.066082] Policy zone: Normal
[    0.066084] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=/dev/mapper/precession-root ro quiet i915.enable_dc=0 i915.disable_power_well=1 intel_idle.max_cstate=1
[    0.066717] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.067004] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.067045] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.084638] Memory: 3086832K/8299152K available (12295K kernel code, 2545K rwdata, 7564K rodata, 2408K init, 3684K bss, 277540K reserved, 0K cma-reserved)
[    0.084646] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[    0.084772] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.084784] Kernel/User page tables isolation: enabled
[    0.084801] ftrace: allocating 36444 entries in 143 pages
[    0.098954] ftrace: allocated 143 pages with 5 groups
[    0.099074] rcu: Hierarchical RCU implementation.
[    0.099076] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.099077] 	Rude variant of Tasks RCU enabled.
[    0.099077] 	Tracing variant of Tasks RCU enabled.
[    0.099079] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.099079] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.103609] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.105698] Console: colour VGA+ 80x25
[    0.105713] printk: console [tty0] enabled
[    0.105728] ACPI: Core revision 20200925
[    0.105806] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.105821] APIC: Switch to symmetric I/O mode setup
[    0.106247] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.125822] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22840bcc6fb, max_idle_ns: 440795207221 ns
[    0.125826] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.06 BogoMIPS (lpj=9578136)
[    0.125829] pid_max: default: 32768 minimum: 301
[    0.125855] LSM: Security Framework initializing
[    0.125864] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.125896] AppArmor: AppArmor initialized
[    0.125897] TOMOYO Linux initialized
[    0.125925] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.125941] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.126208] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.126218] process: using mwait in idle threads
[    0.126221] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.126222] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.126225] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.126227] Spectre V2 : Mitigation: Full generic retpoline
[    0.126228] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.126228] Speculative Store Bypass: Vulnerable
[    0.126231] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.126336] Freeing SMP alternatives memory: 32K
[    0.129920] smpboot: CPU0: Intel(R) Celeron(R) CPU G530 @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.130075] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.130084] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.130086] ... version:                3
[    0.130086] ... bit width:              48
[    0.130087] ... generic registers:      8
[    0.130088] ... value mask:             0000ffffffffffff
[    0.130089] ... max period:             00007fffffffffff
[    0.130090] ... fixed-purpose events:   3
[    0.130091] ... event mask:             00000007000000ff
[    0.130240] rcu: Hierarchical SRCU implementation.
[    0.130767] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.130818] smp: Bringing up secondary CPUs ...
[    0.130923] x86: Booting SMP configuration:
[    0.130925] .... node  #0, CPUs:      #1
[    0.133192] smp: Brought up 1 node, 2 CPUs
[    0.133192] smpboot: Max logical packages: 1
[    0.133192] smpboot: Total of 2 processors activated (9578.13 BogoMIPS)
[    0.145875] node 0 deferred pages initialised in 12ms
[    0.146092] devtmpfs: initialized
[    0.146092] x86/mm: Memory block size: 128MB
[    0.146607] PM: Registering ACPI NVS region [mem 0xbad93000-0xbadd9fff] (290816 bytes)
[    0.146607] PM: Registering ACPI NVS region [mem 0xbade1000-0xbade1fff] (4096 bytes)
[    0.146607] PM: Registering ACPI NVS region [mem 0xbae18000-0xbae24fff] (53248 bytes)
[    0.146607] PM: Registering ACPI NVS region [mem 0xbae49000-0xbae8bfff] (274432 bytes)
[    0.146607] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.146607] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.146607] pinctrl core: initialized pinctrl subsystem
[    0.146607] NET: Registered protocol family 16
[    0.146607] audit: initializing netlink subsys (disabled)
[    0.146607] audit: type=2000 audit(1642482114.040:1): state=initialized audit_enabled=0 res=1
[    0.146607] thermal_sys: Registered thermal governor 'fair_share'
[    0.146607] thermal_sys: Registered thermal governor 'bang_bang'
[    0.146607] thermal_sys: Registered thermal governor 'step_wise'
[    0.146607] thermal_sys: Registered thermal governor 'user_space'
[    0.146607] thermal_sys: Registered thermal governor 'power_allocator'
[    0.146607] cpuidle: using governor ladder
[    0.146607] cpuidle: using governor menu
[    0.146607] ACPI: bus type PCI registered
[    0.146607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.146607] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.146607] PCI: not using MMCONFIG
[    0.146607] PCI: Using configuration type 1 for base access
[    0.146607] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.146607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.150056] Kprobes globally optimized
[    0.150061] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.350578] ACPI: Added _OSI(Module Device)
[    0.350578] ACPI: Added _OSI(Processor Device)
[    0.350578] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.350578] ACPI: Added _OSI(Processor Aggregator Device)
[    0.350578] ACPI: Added _OSI(Linux-Dell-Video)
[    0.350578] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.350578] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.356046] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.356874] ACPI: Dynamic OEM Table Load:
[    0.356879] ACPI: SSDT 0xFFFF976637B51800 0001D8 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.357194] ACPI: Dynamic OEM Table Load:
[    0.357197] ACPI: SSDT 0xFFFF976637A59540 000054 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.358071] ACPI: Interpreter enabled
[    0.358085] ACPI: (supports S0 S4 S5)
[    0.358086] ACPI: Using IOAPIC for interrupt routing
[    0.358114] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.358176] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.358181] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.358521] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.358824] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.359003] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.364302] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.364307] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.364446] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.364572] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.364829] PCI host bridge to bus 0000:00
[    0.364831] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.364833] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.364834] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.364835] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.364837] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.364838] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.364839] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[    0.364841] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.364854] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.364940] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.364980] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.365070] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.365079] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.365085] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.365089] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.365205] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.365226] pci 0000:00:16.0: reg 0x10: [mem 0xfe608000-0xfe60800f 64bit]
[    0.365303] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.365389] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.365406] pci 0000:00:1a.0: reg 0x10: [mem 0xfe607000-0xfe6073ff]
[    0.365495] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.365590] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.365608] pci 0000:00:1b.0: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[    0.365691] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.365776] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.365872] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.365977] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.366072] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.366178] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[    0.366273] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.366384] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.366402] pci 0000:00:1d.0: reg 0x10: [mem 0xfe606000-0xfe6063ff]
[    0.366489] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.366583] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.366771] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.366785] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.366793] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.366801] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.366809] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.366817] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.366825] pci 0000:00:1f.2: reg 0x24: [mem 0xfe605000-0xfe6057ff]
[    0.366869] pci 0000:00:1f.2: PME# supported from D3hot
[    0.366952] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.366970] pci 0000:00:1f.3: reg 0x10: [mem 0xfe604000-0xfe6040ff 64bit]
[    0.366992] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.367105] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.367256] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.367344] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.367460] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.367534] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.367958] pci 0000:02:00.0: supports D1 D2
[    0.367960] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.368353] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.368358] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.368366] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.368449] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.368494] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
[    0.368708] pci 0000:03:00.0: PME# supported from D3hot
[    0.368834] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.368841] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.368924] pci 0000:04:00.0: [1283:8893] type 01 class 0x060401
[    0.369124] pci 0000:04:00.0: supports D1 D2
[    0.369125] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.369194] pci 0000:00:1c.2: PCI bridge to [bus 04-05] (subtractive decode)
[    0.369199] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.369202] pci 0000:00:1c.2:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.369209] pci 0000:00:1c.2:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.369210] pci 0000:00:1c.2:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.369212] pci 0000:00:1c.2:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.369213] pci 0000:00:1c.2:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.369214] pci 0000:00:1c.2:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.369216] pci 0000:00:1c.2:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.369217] pci 0000:00:1c.2:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[    0.369277] pci_bus 0000:05: extended config space not accessible
[    0.369311] pci 0000:05:00.0: [10b8:0005] type 00 class 0x020000
[    0.369354] pci 0000:05:00.0: reg 0x10: [io  0xd100-0xd1ff]
[    0.369378] pci 0000:05:00.0: reg 0x14: [mem 0xfe431000-0xfe431fff]
[    0.369489] pci 0000:05:00.0: reg 0x30: [mem 0xfe420000-0xfe42ffff pref]
[    0.369563] pci 0000:05:00.0: supports D1 D2
[    0.369564] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[    0.369643] pci 0000:05:01.0: [d161:8005] type 00 class 0x020000
[    0.369687] pci 0000:05:01.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.369711] pci 0000:05:01.0: reg 0x14: [mem 0xfe430000-0xfe4303ff]
[    0.369823] pci 0000:05:01.0: reg 0x30: [mem 0xfe400000-0xfe41ffff pref]
[    0.369898] pci 0000:05:01.0: supports D1 D2
[    0.369899] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.370052] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.370066] pci 0000:04:00.0:   bridge window [io  0xd000-0xdfff]
[    0.370074] pci 0000:04:00.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.370088] pci 0000:04:00.0:   bridge window [io  0xd000-0xdfff] (subtractive decode)
[    0.370089] pci 0000:04:00.0:   bridge window [mem 0xfe400000-0xfe4fffff] (subtractive decode)
[    0.370090] pci 0000:04:00.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.370092] pci 0000:04:00.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.370093] pci 0000:04:00.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.370094] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.370095] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.370097] pci 0000:04:00.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.370098] pci 0000:04:00.0:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[    0.370738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.370793] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.370845] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.370897] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12 14 15)
[    0.370948] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.371000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.371052] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.371104] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.371239] iommu: Default domain type: Translated 
[    0.371258] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.371258] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.371258] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.371258] vgaarb: loaded
[    0.371258] EDAC MC: Ver: 3.0.0
[    0.371258] NetLabel: Initializing
[    0.371258] NetLabel:  domain hash size = 128
[    0.371258] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.371258] NetLabel:  unlabeled traffic allowed by default
[    0.371258] PCI: Using ACPI for IRQ routing
[    0.378518] PCI: pci_cache_line_size set to 64 bytes
[    0.378596] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.378598] e820: reserve RAM buffer [mem 0xbad93000-0xbbffffff]
[    0.378600] e820: reserve RAM buffer [mem 0xbae06000-0xbbffffff]
[    0.378602] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.378603] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    0.378642] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.378648] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.380672] clocksource: Switched to clocksource tsc-early
[    0.389468] VFS: Disk quotas dquot_6.6.0
[    0.389485] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.389615] AppArmor: AppArmor Filesystem Enabled
[    0.389639] pnp: PnP ACPI init
[    0.389781] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.389783] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.389785] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.389787] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.389788] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.389795] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.389936] system 00:01: [io  0x0a00-0x0a0f] has been reserved
[    0.389938] system 00:01: [io  0x0a30-0x0a3f] has been reserved
[    0.389939] system 00:01: [io  0x0a20-0x0a2f] has been reserved
[    0.389944] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.390232] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.390290] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.390295] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.390435] pnp 00:04: [dma 0 disabled]
[    0.390484] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.390652] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.390654] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.390656] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.390657] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.390659] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.390661] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.390662] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.390664] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.390669] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.390728] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.390733] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.390914] pnp: PnP ACPI: found 7 devices
[    0.396886] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.396952] NET: Registered protocol family 2
[    0.397074] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.398503] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.398566] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.398769] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.398881] TCP: Hash tables configured (established 65536 bind 65536)
[    0.398937] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.398970] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.399392] NET: Registered protocol family 1
[    0.399400] NET: Registered protocol family 44
[    0.399421] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.399428] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.399432] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.399439] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.399445] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.399451] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.399459] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.399464] pci 0000:04:00.0:   bridge window [io  0xd000-0xdfff]
[    0.399475] pci 0000:04:00.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.399494] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.399497] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.399502] pci 0000:00:1c.2:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.399511] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.399513] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.399514] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.399515] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.399517] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.399518] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.399519] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[    0.399521] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.399522] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.399524] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.399525] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.399526] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.399528] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    0.399529] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    0.399530] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    0.399531] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.399533] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.399534] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.399535] pci_bus 0000:04: resource 10 [mem 0xbfa00000-0xffffffff window]
[    0.399537] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.399538] pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.399539] pci_bus 0000:05: resource 4 [io  0xd000-0xdfff]
[    0.399540] pci_bus 0000:05: resource 5 [mem 0xfe400000-0xfe4fffff]
[    0.399541] pci_bus 0000:05: resource 6 [io  0x0000-0x03af window]
[    0.399543] pci_bus 0000:05: resource 7 [io  0x03e0-0x0cf7 window]
[    0.399544] pci_bus 0000:05: resource 8 [io  0x03b0-0x03df window]
[    0.399545] pci_bus 0000:05: resource 9 [io  0x0d00-0xffff window]
[    0.399546] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.399547] pci_bus 0000:05: resource 11 [mem 0x000c0000-0x000dffff window]
[    0.399549] pci_bus 0000:05: resource 12 [mem 0xbfa00000-0xffffffff window]
[    0.399628] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.399643] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.400099] PCI: CLS 64 bytes, default 64
[    0.400156] Trying to unpack rootfs image as initramfs...
[    0.976457] Freeing initrd memory: 32044K
[    0.976465] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.976467] software IO TLB: mapped [mem 0x00000000b6d93000-0x00000000bad93000] (64MB)
[    0.976914] Initialise system trusted keyrings
[    0.976925] Key type blacklist registered
[    0.976977] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.978191] zbud: loaded
[    0.978364] integrity: Platform Keyring initialized
[    0.978366] Key type asymmetric registered
[    0.978368] Asymmetric key parser 'x509' registered
[    0.978376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.978421] io scheduler mq-deadline registered
[    0.978651] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[    0.978820] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[    0.978932] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[    0.979096] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
[    0.979183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.979195] intel_idle: MWAIT substates: 0x1120
[    0.979197] intel_idle: v0.5.1 model 0x2A
[    0.979199] intel_idle: max_cstate 1 reached
[    0.979247] intel_idle: Local APIC timer is reliable in all C-states
[    0.979858] thermal LNXTHERM:00: registered as thermal_zone0
[    0.979859] ACPI: Thermal Zone [THRM] (35 C)
[    0.979977] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.980139] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.980884] Linux agpgart interface v0.103
[    0.980922] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.981059] i8042: PNP: No PS/2 controller found.
[    0.981114] mousedev: PS/2 mouse device common for all mice
[    0.981146] rtc_cmos 00:02: RTC can wake from S4
[    0.981344] rtc_cmos 00:02: registered as rtc0
[    0.981374] rtc_cmos 00:02: setting system clock to 2022-01-18T05:01:55 UTC (1642482115)
[    0.981389] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.981399] intel_pstate: Intel P-state driver initializing
[    0.981578] ledtrig-cpu: registered to indicate activity on CPUs
[    0.981809] NET: Registered protocol family 10
[    0.990087] Segment Routing with IPv6
[    0.990115] mip6: Mobile IPv6
[    0.990119] NET: Registered protocol family 17
[    0.990155] mpls_gso: MPLS GSO support
[    0.990323] microcode: sig=0x206a7, pf=0x2, revision=0x14
[    0.990330] microcode: Microcode Update Driver: v2.2.
[    0.990335] IPI shorthand broadcast: enabled
[    0.990343] sched_clock: Marking stable (988228601, 2000366)->(1216753496, -226524529)
[    0.990427] registered taskstats version 1
[    0.990430] Loading compiled-in X.509 certificates
[    1.036729] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.036748] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    1.036768] zswap: loaded using pool lzo/zbud
[    1.036878] Key type ._fscrypt registered
[    1.036879] Key type .fscrypt registered
[    1.036880] Key type fscrypt-provisioning registered
[    1.036917] AppArmor: AppArmor sha1 policy hashing enabled
[    1.038568] Freeing unused kernel image (initmem) memory: 2408K
[    1.065837] Write protecting the kernel read-only data: 22528k
[    1.066334] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.066480] Freeing unused kernel image (rodata/data gap) memory: 628K
[    1.132213] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.132216] x86/mm: Checking user space page tables
[    1.192102] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.192116] Run /init as init process
[    1.192119]   with arguments:
[    1.192120]     /init
[    1.192121]   with environment:
[    1.192122]     HOME=/
[    1.192123]     TERM=linux
[    1.192124]     BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64
[    1.270549] epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>  (unofficial 2.4.x kernel port, version 2.1, Sept 11, 2006)
[    1.270922] epic100 0000:05:00.0: MII transceiver #3 control 3000 status 7849.
[    1.271914] epic100 0000:05:00.0: Autonegotiation advertising 01e1 link partner 0001.
[    1.272071] epic100 0000:05:00.0 eth0: SMSC EPIC/100 83c170 at d100, IRQ 18, 00:e0:29:62:43:c0
[    1.297488] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.301215] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    1.301651] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.302362] i2c i2c-0: Successfully instantiated SPD at 0x52
[    1.309095] ACPI: bus type USB registered
[    1.309123] usbcore: registered new interface driver usbfs
[    1.309133] usbcore: registered new interface driver hub
[    1.309146] usbcore: registered new device driver usb
[    1.317247] SCSI subsystem initialized
[    1.325974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.326859] ehci-pci: EHCI PCI platform driver
[    1.326994] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.327001] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.327015] ehci-pci 0000:00:1a.0: debug port 2
[    1.330918] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.337431] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe607000
[    1.341005] libphy: r8169: probed
[    1.341758] r8169 0000:02:00.0 eth1: RTL8168e/8111e, 00:30:67:c4:67:6f, XID 2c2, IRQ 28
[    1.341760] r8169 0000:02:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.342294] libata version 3.00 loaded.
[    1.347609] ahci 0000:00:1f.2: version 3.0
[    1.349852] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.350016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.350019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.350020] usb usb1: Product: EHCI Host Controller
[    1.350021] usb usb1: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd
[    1.350022] usb usb1: SerialNumber: 0000:00:1a.0
[    1.350176] hub 1-0:1.0: USB hub found
[    1.350186] hub 1-0:1.0: 2 ports detected
[    1.350471] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.350478] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.350491] ehci-pci 0000:00:1d.0: debug port 2
[    1.354389] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.354408] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe606000
[    1.357926] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.357930] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.373870] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.373930] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.373932] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.373933] usb usb2: Product: EHCI Host Controller
[    1.373935] usb usb2: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd
[    1.373936] usb usb2: SerialNumber: 0000:00:1d.0
[    1.374073] hub 2-0:1.0: USB hub found
[    1.374081] hub 2-0:1.0: 2 ports detected
[    1.374390] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.374397] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    1.381365] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[    1.381623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.381624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.381626] usb usb3: Product: xHCI Host Controller
[    1.381627] usb usb3: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[    1.381628] usb usb3: SerialNumber: 0000:03:00.0
[    1.381756] hub 3-0:1.0: USB hub found
[    1.381767] hub 3-0:1.0: 2 ports detected
[    1.381923] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.381927] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    1.381931] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[    1.386583] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.386605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.386606] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.386607] usb usb4: Product: xHCI Host Controller
[    1.386608] usb usb4: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[    1.386609] usb usb4: SerialNumber: 0000:03:00.0
[    1.386703] hub 4-0:1.0: USB hub found
[    1.386715] hub 4-0:1.0: 2 ports detected
[    1.398378] scsi host0: ahci
[    1.398653] scsi host1: ahci
[    1.398863] scsi host2: ahci
[    1.399066] scsi host3: ahci
[    1.399269] scsi host4: ahci
[    1.399475] scsi host5: ahci
[    1.399529] ata1: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605100 irq 29
[    1.399532] ata2: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605180 irq 29
[    1.399533] ata3: DUMMY
[    1.399534] ata4: DUMMY
[    1.399537] ata5: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605300 irq 29
[    1.399539] ata6: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605380 irq 29
[    1.605843] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.633831] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.712003] ata6: SATA link down (SStatus 0 SControl 300)
[    1.712026] ata5: SATA link down (SStatus 0 SControl 300)
[    1.712225] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.712245] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.713094] ata1.00: ATA-8: WDC WD2002FAEX-00MJRA0, 01.01L01, max UDMA/133
[    1.713097] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.713996] ata1.00: configured for UDMA/133
[    1.714126] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2002FAEX-0 1L01 PQ: 0 ANSI: 5
[    1.749531] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[    1.749533] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.762231] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.762233] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.762452] hub 1-1:1.0: USB hub found
[    1.762602] hub 1-1:1.0: 4 ports detected
[    1.794230] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.794234] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.794541] hub 2-1:1.0: USB hub found
[    1.794731] hub 2-1:1.0: 6 ports detected
[    1.799507] ata2.00: configured for UDMA/133
[    1.799640] scsi 1:0:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[    1.809007] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.809014] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.809017] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.809020] sd 0:0:0:0: [sda] Write Protect is off
[    1.809022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.809027] sd 1:0:0:0: [sdb] Write Protect is off
[    1.809029] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.809039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.809045] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.854456]  sda: sda1 sda2
[    1.859927]  sdb: sdb1 sdb2
[    1.869961] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.873970] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.994552] tsc: Refined TSC clocksource calibration: 2394.561 MHz
[    1.994559] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842564e28, max_idle_ns: 440795246705 ns
[    1.994583] clocksource: Switched to clocksource tsc
[    2.027447] md/raid1:md0: active with 2 out of 2 mirrors
[    2.027470] md0: detected capacity change from 0 to 1995264819200
[    2.036312] random: fast init done
[    2.053837] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.081431] random: lvm: uninitialized urandom read (4 bytes read)
[    2.106864] device-mapper: uevent: version 1.0.3
[    2.106933] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    2.108122] random: lvm: uninitialized urandom read (2 bytes read)
[    2.162727] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=8d11, bcdDevice= 1.00
[    2.162731] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.162732] usb 1-1.1: Product: Photosmart D110 series
[    2.162733] usb 1-1.1: Manufacturer: HP
[    2.162735] usb 1-1.1: SerialNumber: CN13SG31BH05N9
[    2.168868] usb-storage 1-1.1:1.3: USB Mass Storage device detected
[    2.169005] scsi host6: usb-storage 1-1.1:1.3
[    2.169083] usbcore: registered new interface driver usb-storage
[    2.170898] usbcore: registered new interface driver uas
[    2.245841] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[    2.360225] usb 1-1.3: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[    2.360229] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.360230] usb 1-1.3: Product: Dell USB Keyboard
[    2.360231] usb 1-1.3: Manufacturer: Dell
[    2.368696] hid: raw HID events driver (C) Jiri Kosina
[    2.375718] usbcore: registered new interface driver usbhid
[    2.375720] usbhid: USB HID core driver
[    2.377682] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0001/input/input0
[    2.437843] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[    2.438022] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[    2.559353] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[    2.559358] usb 1-1.4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.559360] usb 1-1.4: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[    2.559362] usb 1-1.4: Manufacturer: Microsoft
[    2.562142] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:0040.0002/input/input1
[    2.562306] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.4/input0
[    2.697831] raid6: sse2x4   gen()  9514 MB/s
[    2.765827] raid6: sse2x4   xor()  6153 MB/s
[    2.833828] raid6: sse2x2   gen() 11552 MB/s
[    2.901827] raid6: sse2x2   xor()  6187 MB/s
[    2.969828] raid6: sse2x1   gen()  9039 MB/s
[    3.037827] raid6: sse2x1   xor()  5741 MB/s
[    3.037828] raid6: using algorithm sse2x2 gen() 11552 MB/s
[    3.037829] raid6: .... xor() 6187 MB/s, rmw enabled
[    3.037830] raid6: using ssse3x2 recovery algorithm
[    3.038983] xor: measuring software checksum speed
[    3.039673]    prefetch64-sse  : 14314 MB/sec
[    3.040420]    generic_sse     : 13185 MB/sec
[    3.040421] xor: using function: prefetch64-sse (14314 MB/sec)
[    3.041144] async_tx: api initialized (async)
[    3.072402] random: lvm: uninitialized urandom read (4 bytes read)
[    3.140149] random: lvm: uninitialized urandom read (4 bytes read)
[    3.178486] scsi 6:0:0:0: Direct-Access     HP       Photosmart D110  1.00 PQ: 0 ANSI: 5
[    3.204706] PM: Image not found (code -22)
[    3.211983] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.439404] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.583644] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    3.837291] random: crng init done
[    4.312996] systemd[1]: Inserted module 'autofs4'
[    4.408592] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.425881] systemd[1]: Detected architecture x86-64.
[    4.440468] systemd[1]: Set hostname to <precession>.
[    5.448617] systemd[1]: Queued start job for default target Graphical Interface.
[    5.449674] systemd[1]: Created slice system-getty.slice.
[    5.449998] systemd[1]: Created slice system-modprobe.slice.
[    5.450291] systemd[1]: Created slice system-postfix.slice.
[    5.450537] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.450755] systemd[1]: Created slice User and Session Slice.
[    5.450885] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.450950] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.451136] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.451195] systemd[1]: Reached target Local Encrypted Volumes.
[    5.451255] systemd[1]: Reached target Slices.
[    5.451277] systemd[1]: Reached target TLS tunnels for network services - per-config-file target.
[    5.451381] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.459317] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.469310] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.475116] systemd[1]: Listening on Syslog Socket.
[    5.475245] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.475326] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.475512] systemd[1]: Listening on Journal Audit Socket.
[    5.475619] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.475752] systemd[1]: Listening on Journal Socket.
[    5.475897] systemd[1]: Listening on udev Control Socket.
[    5.475988] systemd[1]: Listening on udev Kernel Socket.
[    5.476877] systemd[1]: Mounting Huge Pages File System...
[    5.477839] systemd[1]: Mounting POSIX Message Queue File System...
[    5.478947] systemd[1]: Mounting Kernel Debug File System...
[    5.479913] systemd[1]: Mounting Kernel Trace File System...
[    5.480139] systemd[1]: Finished Availability of block devices.
[    5.481189] systemd[1]: Starting Set the console keyboard layout...
[    5.482245] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    5.483203] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.484345] systemd[1]: Starting Load Kernel Module configfs...
[    5.485387] systemd[1]: Starting Load Kernel Module drm...
[    5.486469] systemd[1]: Starting Load Kernel Module fuse...
[    5.496683] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    5.496738] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    5.498749] systemd[1]: Starting Journal Service...
[    5.514336] systemd[1]: Starting Load Kernel Modules...
[    5.515307] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.516312] systemd[1]: Starting Coldplug All udev Devices...
[    5.518335] systemd[1]: Mounted Huge Pages File System.
[    5.518461] systemd[1]: Mounted POSIX Message Queue File System.
[    5.518558] systemd[1]: Mounted Kernel Debug File System.
[    5.518654] systemd[1]: Mounted Kernel Trace File System.
[    5.519027] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    5.519455] systemd[1]: modprobe@configfs.service: Succeeded.
[    5.519690] systemd[1]: Finished Load Kernel Module configfs.
[    5.520936] systemd[1]: Mounting Kernel Configuration File System...
[    5.534532] systemd[1]: Mounted Kernel Configuration File System.
[    5.537130] fuse: init (API version 7.32)
[    5.537895] systemd[1]: modprobe@fuse.service: Succeeded.
[    5.538142] systemd[1]: Finished Load Kernel Module fuse.
[    5.539254] systemd[1]: Mounting FUSE Control File System...
[    5.542461] systemd[1]: Mounted FUSE Control File System.
[    5.559589] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    5.638851] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    5.640028] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.653922] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    5.654844] systemd[1]: Starting Create System Users...
[    5.710508] systemd[1]: modprobe@drm.service: Succeeded.
[    5.710746] systemd[1]: Finished Load Kernel Module drm.
[    5.713140] systemd[1]: Started Journal Service.
[    5.901854] loop: module loaded
[    6.129097] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.141910] ACPI: Power Button [PWRB]
[    6.141985] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.142028] ACPI: Power Button [PWRF]
[    6.188227] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.216592] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.216780] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.217094] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    6.273487] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    6.273490] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    6.273491] RAPL PMU: hw unit of domain package 2^-16 Joules
[    6.273492] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    6.277794] at24 0-0050: supply vcc not found, using dummy regulator
[    6.278386] iTCO_vendor_support: vendor-support=0
[    6.281727] at24 0-0050: 256 byte spd EEPROM, read-only
[    6.281758] at24 0-0052: supply vcc not found, using dummy regulator
[    6.284149] at24 0-0052: 256 byte spd EEPROM, read-only
[    6.294411] cryptd: max_cpu_qlen set to 1000
[    6.311411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.311457] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    6.311565] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.577158] usblp 1-1.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8D11
[    6.577189] usbcore: registered new interface driver usblp
[    6.682044] Setting dangerous option enable_dc - tainting kernel
[    6.682048] Setting dangerous option disable_power_well - tainting kernel
[    6.683770] i915 0000:00:02.0: vgaarb: deactivate vga console
[    6.684189] Console: switching to colour dummy device 80x25
[    6.685785] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.695625] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[    6.803580] fbcon: i915drmfb (fb0) is primary device
[    6.898728] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.898729] Console: switching to colour frame buffer device 240x67
[    6.912348] intel_rapl_common: Found RAPL domain package
[    6.912350] intel_rapl_common: Found RAPL domain core
[    6.912351] intel_rapl_common: Found RAPL domain uncore
[    6.919869] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    7.088398] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.088402] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.088403] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.088405] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    7.088406] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    7.088407] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    7.088409] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    7.088410] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    7.088412] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    7.131067] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    7.131122] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.131170] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.131215] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.131261] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.131307] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.272255] Adding 409596k swap on /dev/mapper/precession-swap.  Priority:-2 extents:1 across:409596k FS
[    7.451938] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
[    7.605275] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[    7.605285] ext2 filesystem being mounted at /tmp supports timestamps until 2038 (0x7fffffff)
[    7.788627] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    7.848161] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[    7.851689] systemd-journald[279]: Received client request to flush runtime journal.
[    8.545986] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    9.871860] Process accounting resumed

I have no idea why the Bullseye version of the package fails to load with
intel_idle.max_cstate=1. I was able to boot successfully with working
Realtek Ethernet if I did not set intel_idle.max_cstate=1. But then due
to GPU hangs the computer was difficult to use.

I could try some experiments if you have some idea what the
incompatibility might be. Until then I cannot use the firmware-realtek in
Bullseye and need to keep this ancient version of the package installed
so that I can get on the network.

-- System Information:
Debian Release: 11.2
  APT prefers stable-security
  APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.10.0-10-amd64 (SMP w/2 CPU threads)
Kernel taint flags: TAINT_USER
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

firmware-realtek depends on no packages.

firmware-realtek recommends no packages.

Versions of packages firmware-realtek suggests:
ii  initramfs-tools  0.140

-- no debconf information


Reply to: