Bug#1002978: Another GPU hang
OK, now we know the i915 driver, in my environment is NOT fixed with just
the microcode. I get GPU hangs whether the microcode is up-to-date or not.
This boot had NO kernel command line options (besides Debian defaults):
GRUB_CMDLINE_LINUX_DEFAULT="quiet pcie_aspm=force"
I don't remember if I added pcie_aspm=force or if Debian did. I've had that
forever. I will try removing it next, but I probably need it for my Realtek
Ethernet that uses the 8168 driver. Currently, I have:
$ cat /sys/module/pcie_aspm/parameters/policy
[default] performance powersave powersupersave
Here is the output of
/sys/class/drm/card0/error:
GPU HANG: ecode 6:2:bb8ffff6, in systemd-logind [662]
Kernel: 5.10.0-10-amd64 x86_64
Driver: 20200917
Time: 1642463910 s 885852 us
Boottime: 7195 s 975866 us
Uptime: 7189 s 236627 us
Capture: 4296691264 jiffies; 543240 ms ago
Active process (on ring bcs0): systemd-logind [662]
Reset count: 0
Suspend count: 0
Platform: SANDYBRIDGE
Subplatform: 0x0
PCI ID: 0x0102
PCI Revision: 0x09
PCI Subsystem: 1565:110d
IOMMU enabled?: 0
RPM wakelock: yes
PM suspended: no
GT awake: yes
EIR: 0x00000000
IER: 0x82bc8585
GTIER[0]: 0x00401001
PGTBL_ER: 0x00000000
FORCEWAKE: 0x00000000
DERRMR: 0x0000ffff
fence[0] = fde03b007f6001
fence[1] = 122600701127003
fence[2] = 00000000
fence[3] = 00000000
fence[4] = 00000000
fence[5] = 00000000
fence[6] = 00000000
fence[7] = 00000000
fence[8] = 00000000
fence[9] = 00000000
fence[10] = 00000000
fence[11] = 00000000
fence[12] = 00000000
fence[13] = 00000000
fence[14] = 00000000
fence[15] = 00000000
ERROR: 0x00000000
DONE_REG: 0x00000000
bcs0 command stream:
CCID: 0x00000000
START: 0x00005000
HEAD: 0x0fe034d0 [0x00003458]
TAIL: 0x000036f8 [0x000034d0, 0x000034e0]
CTL: 0x00003001
MODE: 0x00000000
HWS: 0x7fffb000
ACTHD: 0x00000000 7fff3ee8
IPEIR: 0x00000008
IPEHR: 0x44700007
ESR: 0x00000000
INSTDONE: 0xfffffff1
batch: [0x00000000_7fff3000, 0x00000000_7fff7000]
BBADDR: 0x00000000_7fff3ee3
BB_STATE: 0x00000000
INSTPS: 0x00000000
INSTPM: 0x00000000
FADDR: 0x00000000 7fff3f80
RC PSMI: 0x00000010
FAULT_REG: 0x00000000
GFX_MODE: 0x00000000
PP_DIR_BASE: 0x00000000
engine reset count: 0
Active context: systemd-logind[662] prio 0, guilty 0 active 0, runtime total 0ns, avg 0ns
bcs0 --- HW Status = 0x00000000 7fffb000
:cL%-H!!!Tc0;&FRS,4aK&eK-$Fk6JP!!!!^IKP"K!4)Z.
bcs0 --- batch = 0x00000000 7fff3000
:=m_`(<E4ijT''DoL:Qc$->+@[H9*1>F@9kb_ZL,tUu]nJ#WN6g$ROq$#UUsrA'--e$d_R^0)luEdKiJD?%4+2TScP/afS7MKb-!')6*QmkM"Blk<@4s1<t=9><;EjkJ#1.f"Jfpej!qVZa!XN-KA[pR`*rg0HQ5T%GpPsj+--CS"%=$jQ6kk;s1f^q.Lo'!^l]kiSj<ZRhp)'3SK1BdAGfW4h$@WDe[^.dB'uJJ[^RFG]sJQ,;#c8$IPR(8\3Nt9B$1nBn9GE]Kn1:QkcAh&sTN%=2Z`FdfQmihB5m5$jtCaNJ`J+7d[?1'r+jC>8M4Fpl!m3?ri7jfXZH[J]1gY4)\@FT%>S]p_nQEd7.q"nNW"9#LIO!8f<k<5C\0"26;l.QFF;1`_lb]-uAS.]D%?pkOW-5Xh"O<2TgP.IkpJRa3d5DF8d;Cq"qo\!q5E8?km/.G2Q!6M#H73j5NXKLu$u_U[]`+&%H#k_sd%;0n??2LYLY^4S[3L=$AF/%-rhl/7#k"ii:M+D"ANu""fC:GOa0??<chQNrT4'*!7$f`R`M\Niq6SqG09Uc(s?qcSP%?Wqa^iLnG\(:@?,iUNUlo>2Y>V`Jhe43XiCr++i\Q2=(BsA+ZA/pcS]Z=Ym?gVZd/E<cAl#H*N"bpSN5.3Ur?&C[M/ZK,ee=4b2.#mMiV^>`ZT&_2+3=(L'/[WV<0?.F3NSo2Oj9Cg([C?<5#tprrmU]Zng5G_:V_--7.X#hjf<<bL=q5NQg>n<;`*o>BhpDhh/bZ]+CY_C'XBK6%TZe2aK!L\UF%0cWmV_Fo48LFmI8%_9+8])9De%WAP:P4Etm-\s!sB7#I,r0L5G?uhuUQ1(uT"5Vg6^mt.DBZb?qq+mUQhiIBR$%i:B(*7-N4s<^:N!dt0cQ0s5s+k0m$jtCU4,i)BB41=kiWo?S!jlZkY92ou0D;o2B[Qju>l!LcIsr@W&,T%9=u7&TPZe*=HVitpV_`;n'2/baJ85fK^o\Lm<[=F;%./##ZtX0k1t5G*nI%E`?ri7fg%PrgQW.=8TNbZO07Bbl9n`NK0q=S1U%Y;lIt9ZX9<TpXrT7;Yf3]j\L=0@)<1r],a7B:Th?io_M$D<HIJa,WXmagRCokq[>tOb`e^&oNkdoaEl4%N(2--N-[ISbgeH9pu:cDKWggP-@,8@f"=jhqQW,C/LBgIZZp]`dKMO3QiYh(dsMIgI==2lY6)lu$<Qs4_^@ZB("ZPLL+!u<FJbjWR$:W=&&hFKBt0"gsPSPBLr*,aahZ%hP-0iEApO!f$u)@b;pCA\:JL8);#]pQQHB5h>H#3R`]N#9.[!KO-CR/!RC[1CM\'Y1J_6+Y3C$t)7T!";cr0l`'F2P<!8lpcE?-0;;d@SoAF^C3JP@W*uWP/Fm$#1b-jY&$/X5;BdfMq?1d/?cg8on^TVCqc^N@gQLmT.:lXs54AB_2OZ)H0u_-n@dHfa5ij:e5),@K9SK[e3!"p>-:3]"o[p[CE\'(:/^WTT/o&m<:#Zq.%`RH[RiaNd@g)P\C0=^al!DC.Tegj)\_2A5Q2>o#$MBn1WqElTkF:]'JXff4gP1@1Rqn/%ab**p1GI$cQBcCm.^G<:MT5?jpBSX-i4pr>C=C`c+;r@Gf%a0Ni$0"(k-<lNIU+%MY6:j4p6+eH!u(>nHI#(>;*/+ikG<4+CA?<Ycla5C[5Z_h`mY'Oh\05X6[:O]?2aLmis&?.];S]*6qKB,hG(I(K.kN*I/0D+sPl3[ugu8,4!=7nfdGl.sV\,,&Y&Mlc=jb&D$Cu]SUEL4`;N.aFUg_HcVS$7,,e9j@2;nD<*uG,+e?OnfaUqT(42!-_BlR]SM=5QTU(jj?_PA^#Vf!:;,^Xi0D":j*R_UJn7!F9]nX`8/I4"Gl.SVqC77#I2W+SE^*8MoJ1C$lHrYF44_K&Zg[a)o[A$_:\+l?i&I@XrcKE]a7N7GdnfQAl1N)HrA<@([JOdFKX^n:d7dpF^[757RfB7KrA=O.>5HoRCs2gHkbUs9YN?IYr:r_1qS^AOT_#[We7Gck_IH?BItbqE?EGdslc-UZ?!b'QhsmeU^0mIp\1d1Pf=lSh.;`C,H'B8O3fC_35KF&uLtQbNS.3Hn;7"[MU?QUqa\BP3fDM^cJ,)RZ?h8iTN.:D`2\Z4Y+Pm#^s'd'&^ZP\m?JjigR=ECTngA4o7D+F;+qia#f9%M#6f$flnfY'qh0BW6OUkbdXlN.,'%ZUshF)d;6Z4/peY]C_rF*A<?UqFehU>R+s%n:F<BfjVL/7^&?fTUb[]f6"5!#bCQla"l-Do:0HZq\lj5No1ZC@9]j8C`_^Z3r7]1q]2C0U&`:&`^lm&,>[h"t(NW&Df5hJE%Zjm,.anGi74SYLL99tc"!j?pWAC#l>.12;=<a?C!3]g+I'Sb!)!f3K&BhY"D6f9A\es/C30i['$PId@MJ)Op\Y'X#/0D"#F%#uc9Mq]EH4Y;dHtA(Qs*?@FbU$bg$9$ZuERY0$_2?=BI\VuFIQkNA1+05pKJBeM^ET;]s23!"GP0r_:8Y`J(TH;_<Q/R&135Bm]9p[$=0PCM(no1S]>cB!o;^S(9!eslWhor%+O,@u2Mhl#AEp\C./^\d!up5K%&Mj<?V!!!!I
bcs0 --- ring = 0x00000000 00005000
:g<H.45f-Q'8`>C@?n2CK.hNi?'FjCEpV$$BlWg]$97gC]_!VMK700nM4@Bk02k50MGt:;(0Zj=hC@OU-KN/4*M[2a05D<0NV:u0Xc^Wkd>4@EYr\)ti8,hH$KiZPPn")qI/UMkf0Uk.g*XU*saY>akni+,Nq:?^us*f`5O7u4VE=B\->WQCt9WJY1d8Ra!\r\?]BcKI8`&^C"fPpqSLeNgOaPmRP+EBGr,VFE'o>s+U%S1u-'ORXS*J^dgLdI/#'QF/k&B,VTH/o9%;<3E_6^2QpUPMYbKW*l3NZb>]"iH.2*'i"n*Cg[KE=YpbN>t2?`"PWPZuHN%&?Qp;IUjBfiT,aY%aj?gOoqK$8!4[D"jt79*(+gf01QR:E<jn0!us]#`$!)3f,4]GN-QS%OJ<d\r^i'[;B1174\,m?9R.d.dhhFD+D)UTVH.1)oK/o083*0SFWomQZ/gF<5qI!]`t6E6$F.MV*'pZG#0.;@E=&nggDiLq`"'g!lu<E<p\2Bf5TG%m`t4"G/9/T?!d+BdiY:@nc8^G9a:""Ol'(Blm\;*?Gj1I&YH8(Vo<+mm\F-AFh0qJPs3(%ZHOo<"'&?kXGifS'lNla=*_:aH.Xj,SE=.I4"roosiYj%t@Q8pp`$5a8i])Nua`rgg8-FqD35::[nA>:`!!',7
available engines: 7
slice total: 0, mask=0000
subslice total: 0
EU total: 0
EU per subslice: 0
has slice power gating: no
has subslice power gating: no
has EU power gating: no
Unavailable
Num Pipes: 2
Pipe [0]:
Power: on
SRC: 077f0437
STAT: 00000000
Plane [0]:
CNTR: d8004400
STRIDE: 00001e00
ADDR: 00000000
SURF: 007f6000
TILEOFF: 00000000
Cursor [0]:
CNTR: 04004027
POS: 0277047e
BASE: 00fdf000
Pipe [1]:
Power: on
SRC: 00000000
STAT: 00000000
Plane [1]:
CNTR: 00004000
STRIDE: 00000000
ADDR: 00000000
SURF: 00000000
TILEOFF: 00000000
Cursor [1]:
CNTR: 00000000
POS: 00000000
BASE: 00000000
CPU transcoder: A
Power: on
CONF: c0000000
HTOTAL: 0897077f
HBLANK: 0897077f
HSYNC: 080307d7
VTOTAL: 04640437
VBLANK: 04640437
VSYNC: 0440043b
CPU transcoder: B
Power: on
CONF: 00000000
HTOTAL: 00000000
HBLANK: 00000000
HSYNC: 00000000
VTOTAL: 00000000
VBLANK: 00000000
VSYNC: 00000000
gen: 6
gt: 1
iommu: disabled
memory-regions: 5
page-sizes: 1000
platform: SANDYBRIDGE
ppgtt-size: 31
ppgtt-type: 1
dma_mask_size: 40
is_mobile: no
is_lp: no
require_force_probe: no
is_dgfx: no
has_64bit_reloc: no
gpu_reset_clobbers_display: no
has_reset_engine: no
has_fpga_dbg: no
has_global_mocs: no
has_gt_uc: no
has_l3_dpf: no
has_llc: yes
has_logical_ring_contexts: no
has_logical_ring_elsq: no
has_logical_ring_preemption: no
has_master_unit_irq: no
has_pooled_eu: no
has_rc6: yes
has_rc6p: yes
has_rps: yes
has_runtime_pm: no
has_snoop: no
has_coherent_ggtt: yes
unfenced_needs_alignment: no
hws_needs_physical: no
cursor_needs_physical: no
has_csr: no
has_ddi: no
has_dp_mst: no
has_dsb: no
has_dsc: no
has_fbc: yes
has_gmch: no
has_hdcp: no
has_hotplug: yes
has_hti: no
has_ipc: no
has_modular_fia: no
has_overlay: no
has_psr: no
has_psr_hw_tracking: no
overlay_needs_physical: no
supports_tv: no
rawclk rate: 125000 kHz
CS timestamp frequency: 12500000 Hz
Has logical contexts? yes
scheduler: 0
i915.vbt_firmware=(null)
i915.modeset=-1
i915.lvds_channel_mode=0
i915.panel_use_ssc=-1
i915.vbt_sdvo_panel_type=-1
i915.enable_dc=-1
i915.enable_fbc=0
i915.enable_psr=-1
i915.psr_safest_params=no
i915.enable_psr2_sel_fetch=no
i915.disable_power_well=1
i915.enable_ips=1
i915.invert_brightness=0
i915.enable_guc=0
i915.guc_log_level=-1
i915.guc_firmware_path=(null)
i915.huc_firmware_path=(null)
i915.dmc_firmware_path=(null)
i915.mmio_debug=0
i915.edp_vswing=0
i915.reset=3
i915.inject_probe_failure=0
i915.fastboot=-1
i915.enable_dpcd_backlight=-1
i915.force_probe=
i915.fake_lmem_start=0
i915.enable_hangcheck=yes
i915.load_detect_test=no
i915.force_reset_modeset_test=no
i915.error_capture=yes
i915.disable_display=no
i915.verbose_state_checks=yes
i915.nuclear_pageflip=no
i915.enable_dp_mst=yes
i915.enable_gvt=no
Here are the full logs from dmesg:
[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[ 0.000000] Linux version 5.10.0-10-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.84-1 (2021-12-08)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=/dev/mapper/precession-root ro quiet pcie_aspm=force
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad92fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad93000-0x00000000badd9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badda000-0x00000000bade0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bade1000-0x00000000bade1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bade2000-0x00000000bae04fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae05000-0x00000000bae05fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bae06000-0x00000000bae17fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae18000-0x00000000bae24fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae25000-0x00000000bae48fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae49000-0x00000000bae8bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae8c000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H61MU3/H61MU3, BIOS 4.6.4 04/07/2011
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.513 MHz processor
[ 0.000831] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000834] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000842] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[ 0.000847] MTRR default type: uncachable
[ 0.000848] MTRR fixed ranges enabled:
[ 0.000849] 00000-9FFFF write-back
[ 0.000850] A0000-BFFFF uncachable
[ 0.000851] C0000-CFFFF write-protect
[ 0.000852] D0000-E7FFF uncachable
[ 0.000853] E8000-FFFFF write-protect
[ 0.000854] MTRR variable ranges enabled:
[ 0.000856] 0 base 000000000 mask E00000000 write-back
[ 0.000857] 1 base 200000000 mask FC0000000 write-back
[ 0.000858] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000859] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000860] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000861] 5 base 23FE00000 mask FFFE00000 uncachable
[ 0.000862] 6 disabled
[ 0.000863] 7 disabled
[ 0.000864] 8 disabled
[ 0.000864] 9 disabled
[ 0.001444] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001679] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[ 0.001686] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.012438] found SMP MP-table at [mem 0x000fcd90-0x000fcd9f]
[ 0.050339] reserving inaccessible SNB gfx pages
[ 0.050875] RAMDISK: [mem 0x3388d000-0x35c3dfff]
[ 0.050880] ACPI: Early table checksum verification disabled
[ 0.050884] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.050888] ACPI: XSDT 0x00000000BADDA068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.050895] ACPI: FACP 0x00000000BADE09C8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.050901] ACPI: DSDT 0x00000000BADDA150 006876 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.050905] ACPI: FACS 0x00000000BAE1CF80 000040
[ 0.050908] ACPI: APIC 0x00000000BADE0AC0 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.050911] ACPI: SSDT 0x00000000BADE0B28 000098 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.050915] ACPI: MCFG 0x00000000BADE0BC0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.050918] ACPI: HPET 0x00000000BADE0C00 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.050922] ACPI: ASPT 0x00000000BADE0C38 000034 (v07 ALASKA PerfTune 01072009 AMI 00000000)
[ 0.050925] ACPI: Reserving FACP table memory at [mem 0xbade09c8-0xbade0abb]
[ 0.050927] ACPI: Reserving DSDT table memory at [mem 0xbadda150-0xbade09c5]
[ 0.050927] ACPI: Reserving FACS table memory at [mem 0xbae1cf80-0xbae1cfbf]
[ 0.050929] ACPI: Reserving APIC table memory at [mem 0xbade0ac0-0xbade0b21]
[ 0.050930] ACPI: Reserving SSDT table memory at [mem 0xbade0b28-0xbade0bbf]
[ 0.050931] ACPI: Reserving MCFG table memory at [mem 0xbade0bc0-0xbade0bfb]
[ 0.050932] ACPI: Reserving HPET table memory at [mem 0xbade0c00-0xbade0c37]
[ 0.050933] ACPI: Reserving ASPT table memory at [mem 0xbade0c38-0xbade0c6b]
[ 0.050942] ACPI: Local APIC address 0xfee00000
[ 0.050993] No NUMA configuration found
[ 0.050994] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[ 0.051007] NODE_DATA(0) allocated [mem 0x23fdd2000-0x23fdfbfff]
[ 0.051486] Zone ranges:
[ 0.051487] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.051489] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.051490] Normal [mem 0x0000000100000000-0x000000023fdfffff]
[ 0.051492] Device empty
[ 0.051493] Movable zone start for each node
[ 0.051497] Early memory node ranges
[ 0.051498] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.051499] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.051500] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.051501] node 0: [mem 0x0000000040200000-0x00000000bad92fff]
[ 0.051502] node 0: [mem 0x00000000bae05000-0x00000000bae05fff]
[ 0.051503] node 0: [mem 0x00000000bae8c000-0x00000000baffffff]
[ 0.051504] node 0: [mem 0x0000000100000000-0x000000023fdfffff]
[ 0.051506] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
[ 0.051508] On node 0 totalpages: 2074788
[ 0.051509] DMA zone: 64 pages used for memmap
[ 0.051510] DMA zone: 156 pages reserved
[ 0.051511] DMA zone: 3996 pages, LIFO batch:0
[ 0.051512] DMA32 zone: 11885 pages used for memmap
[ 0.051513] DMA32 zone: 760584 pages, LIFO batch:63
[ 0.051514] Normal zone: 20472 pages used for memmap
[ 0.051515] Normal zone: 1310208 pages, LIFO batch:63
[ 0.051518] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.051562] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.054330] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.059760] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.059764] On node 0, zone DMA32: 114 pages in unavailable ranges
[ 0.059770] On node 0, zone DMA32: 134 pages in unavailable ranges
[ 0.060394] On node 0, zone Normal: 20480 pages in unavailable ranges
[ 0.060403] On node 0, zone Normal: 512 pages in unavailable ranges
[ 0.060413] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
[ 0.060722] ACPI: PM-Timer IO Port: 0x408
[ 0.060725] ACPI: Local APIC address 0xfee00000
[ 0.060732] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.060744] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.060746] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.060747] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.060749] ACPI: IRQ0 used by override.
[ 0.060750] ACPI: IRQ9 used by override.
[ 0.060752] Using ACPI (MADT) for SMP configuration information
[ 0.060754] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.060759] TSC deadline timer available
[ 0.060760] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.060787] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.060789] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.060790] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.060791] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.060792] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.060794] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.060796] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.060798] PM: hibernation: Registered nosave memory: [mem 0xbad93000-0xbadd9fff]
[ 0.060798] PM: hibernation: Registered nosave memory: [mem 0xbadda000-0xbade0fff]
[ 0.060799] PM: hibernation: Registered nosave memory: [mem 0xbade1000-0xbade1fff]
[ 0.060800] PM: hibernation: Registered nosave memory: [mem 0xbade2000-0xbae04fff]
[ 0.060802] PM: hibernation: Registered nosave memory: [mem 0xbae06000-0xbae17fff]
[ 0.060803] PM: hibernation: Registered nosave memory: [mem 0xbae18000-0xbae24fff]
[ 0.060803] PM: hibernation: Registered nosave memory: [mem 0xbae25000-0xbae48fff]
[ 0.060804] PM: hibernation: Registered nosave memory: [mem 0xbae49000-0xbae8bfff]
[ 0.060806] PM: hibernation: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
[ 0.060807] PM: hibernation: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
[ 0.060808] PM: hibernation: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[ 0.060809] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.060809] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.060810] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.060812] [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[ 0.060813] Booting paravirtualized kernel on bare hardware
[ 0.060817] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.065961] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.066172] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u1048576
[ 0.066182] pcpu-alloc: s200536 r8192 d28840 u1048576 alloc=1*2097152
[ 0.066183] pcpu-alloc: [0] 0 1
[ 0.066221] Built 1 zonelists, mobility grouping on. Total pages: 2042211
[ 0.066222] Policy zone: Normal
[ 0.066224] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=/dev/mapper/precession-root ro quiet pcie_aspm=force
[ 0.066276] PCIe ASPM is forcibly enabled
[ 0.066830] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.067113] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.067154] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.084742] Memory: 3086424K/8299152K available (12295K kernel code, 2545K rwdata, 7564K rodata, 2408K init, 3684K bss, 282044K reserved, 0K cma-reserved)
[ 0.084750] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[ 0.084875] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.084888] Kernel/User page tables isolation: enabled
[ 0.084904] ftrace: allocating 36444 entries in 143 pages
[ 0.099016] ftrace: allocated 143 pages with 5 groups
[ 0.099133] rcu: Hierarchical RCU implementation.
[ 0.099135] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.099136] Rude variant of Tasks RCU enabled.
[ 0.099137] Tracing variant of Tasks RCU enabled.
[ 0.099138] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.099139] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.103605] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.105698] Console: colour VGA+ 80x25
[ 0.105712] printk: console [tty0] enabled
[ 0.105728] ACPI: Core revision 20200925
[ 0.105806] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.105821] APIC: Switch to symmetric I/O mode setup
[ 0.106246] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.125823] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2283f84fbd5, max_idle_ns: 440795297650 ns
[ 0.125827] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.02 BogoMIPS (lpj=9578052)
[ 0.125830] pid_max: default: 32768 minimum: 301
[ 0.125856] LSM: Security Framework initializing
[ 0.125866] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.125897] AppArmor: AppArmor initialized
[ 0.125899] TOMOYO Linux initialized
[ 0.125927] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.125943] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.126211] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.126221] process: using mwait in idle threads
[ 0.126224] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.126225] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.126228] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.126230] Spectre V2 : Mitigation: Full generic retpoline
[ 0.126230] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.126231] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.126233] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.126234] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.126237] MDS: Mitigation: Clear CPU buffers
[ 0.126348] Freeing SMP alternatives memory: 32K
[ 0.129920] smpboot: CPU0: Intel(R) Celeron(R) CPU G530 @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.130077] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.130087] ... version: 3
[ 0.130088] ... bit width: 48
[ 0.130088] ... generic registers: 8
[ 0.130089] ... value mask: 0000ffffffffffff
[ 0.130090] ... max period: 00007fffffffffff
[ 0.130091] ... fixed-purpose events: 3
[ 0.130092] ... event mask: 00000007000000ff
[ 0.130240] rcu: Hierarchical SRCU implementation.
[ 0.130770] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.130820] smp: Bringing up secondary CPUs ...
[ 0.130926] x86: Booting SMP configuration:
[ 0.130928] .... node #0, CPUs: #1
[ 0.133889] smp: Brought up 1 node, 2 CPUs
[ 0.133889] smpboot: Max logical packages: 1
[ 0.133889] smpboot: Total of 2 processors activated (9578.05 BogoMIPS)
[ 0.147663] node 0 deferred pages initialised in 12ms
[ 0.147672] devtmpfs: initialized
[ 0.147672] x86/mm: Memory block size: 128MB
[ 0.147672] PM: Registering ACPI NVS region [mem 0xbad93000-0xbadd9fff] (290816 bytes)
[ 0.147672] PM: Registering ACPI NVS region [mem 0xbade1000-0xbade1fff] (4096 bytes)
[ 0.147672] PM: Registering ACPI NVS region [mem 0xbae18000-0xbae24fff] (53248 bytes)
[ 0.147672] PM: Registering ACPI NVS region [mem 0xbae49000-0xbae8bfff] (274432 bytes)
[ 0.147672] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.147672] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.147672] pinctrl core: initialized pinctrl subsystem
[ 0.147672] NET: Registered protocol family 16
[ 0.147672] audit: initializing netlink subsys (disabled)
[ 0.147672] audit: type=2000 audit(1642456714.040:1): state=initialized audit_enabled=0 res=1
[ 0.147672] thermal_sys: Registered thermal governor 'fair_share'
[ 0.147672] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.147672] thermal_sys: Registered thermal governor 'step_wise'
[ 0.147672] thermal_sys: Registered thermal governor 'user_space'
[ 0.147672] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.147672] cpuidle: using governor ladder
[ 0.147672] cpuidle: using governor menu
[ 0.147672] ACPI: bus type PCI registered
[ 0.147672] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.147672] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.147672] PCI: not using MMCONFIG
[ 0.147672] PCI: Using configuration type 1 for base access
[ 0.147672] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.147672] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.150633] Kprobes globally optimized
[ 0.150638] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.350674] ACPI: Added _OSI(Module Device)
[ 0.350674] ACPI: Added _OSI(Processor Device)
[ 0.350674] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.350674] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.350674] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.350674] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.350674] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.356130] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.356956] ACPI: Dynamic OEM Table Load:
[ 0.356962] ACPI: SSDT 0xFFFF9647156E2A00 0001D8 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.357279] ACPI: Dynamic OEM Table Load:
[ 0.357282] ACPI: SSDT 0xFFFF9647F7A3E1E0 000054 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.358152] ACPI: Interpreter enabled
[ 0.358165] ACPI: (supports S0 S4 S5)
[ 0.358167] ACPI: Using IOAPIC for interrupt routing
[ 0.358196] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.358260] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.358264] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.358620] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.358930] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.359112] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.364391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.364397] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.364535] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.364662] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.364919] PCI host bridge to bus 0000:00
[ 0.364922] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.364924] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.364925] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.364926] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.364928] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.364929] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.364930] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[ 0.364932] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.364945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.365033] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.365042] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.365048] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.365052] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.365171] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.365192] pci 0000:00:16.0: reg 0x10: [mem 0xfe608000-0xfe60800f 64bit]
[ 0.365269] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.365358] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.365375] pci 0000:00:1a.0: reg 0x10: [mem 0xfe607000-0xfe6073ff]
[ 0.365463] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.365557] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.365576] pci 0000:00:1b.0: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[ 0.365660] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.365744] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.365839] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.365944] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.366040] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.366149] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[ 0.366245] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.366352] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.366369] pci 0000:00:1d.0: reg 0x10: [mem 0xfe606000-0xfe6063ff]
[ 0.366457] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.366547] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.366734] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.366748] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.366756] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.366764] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.366773] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.366781] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.366789] pci 0000:00:1f.2: reg 0x24: [mem 0xfe605000-0xfe6057ff]
[ 0.366833] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.366918] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.366937] pci 0000:00:1f.3: reg 0x10: [mem 0xfe604000-0xfe6040ff 64bit]
[ 0.366959] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.367194] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.367282] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.367402] pci 0000:01:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.367476] pci 0000:01:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.367929] pci 0000:01:00.0: supports D1 D2
[ 0.367931] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.368339] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.368343] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.368351] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.368432] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.368477] pci 0000:02:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
[ 0.368695] pci 0000:02:00.0: PME# supported from D3hot
[ 0.368824] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.368831] pci 0000:00:1c.1: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.368917] pci 0000:03:00.0: [1283:8893] type 01 class 0x060401
[ 0.369117] pci 0000:03:00.0: supports D1 D2
[ 0.369118] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.369188] pci 0000:00:1c.2: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.369192] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.369196] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.369203] pci 0000:00:1c.2: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.369204] pci 0000:00:1c.2: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.369206] pci 0000:00:1c.2: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.369207] pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.369208] pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.369210] pci 0000:00:1c.2: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.369211] pci 0000:00:1c.2: bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[ 0.369270] pci_bus 0000:04: extended config space not accessible
[ 0.369304] pci 0000:04:00.0: [10b8:0005] type 00 class 0x020000
[ 0.369347] pci 0000:04:00.0: reg 0x10: [io 0xd100-0xd1ff]
[ 0.369371] pci 0000:04:00.0: reg 0x14: [mem 0xfe431000-0xfe431fff]
[ 0.369481] pci 0000:04:00.0: reg 0x30: [mem 0xfe420000-0xfe42ffff pref]
[ 0.369556] pci 0000:04:00.0: supports D1 D2
[ 0.369557] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.369636] pci 0000:04:01.0: [d161:8005] type 00 class 0x020000
[ 0.369680] pci 0000:04:01.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.369704] pci 0000:04:01.0: reg 0x14: [mem 0xfe430000-0xfe4303ff]
[ 0.369817] pci 0000:04:01.0: reg 0x30: [mem 0xfe400000-0xfe41ffff pref]
[ 0.369891] pci 0000:04:01.0: supports D1 D2
[ 0.369892] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370045] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.370059] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 0.370067] pci 0000:03:00.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.370081] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
[ 0.370082] pci 0000:03:00.0: bridge window [mem 0xfe400000-0xfe4fffff] (subtractive decode)
[ 0.370084] pci 0000:03:00.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.370085] pci 0000:03:00.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.370086] pci 0000:03:00.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.370088] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.370089] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.370090] pci 0000:03:00.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.370091] pci 0000:03:00.0: bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[ 0.370715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.370770] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.370822] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.370874] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12 14 15)
[ 0.370925] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.370978] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.371030] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.371081] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.371220] iommu: Default domain type: Translated
[ 0.371239] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.371239] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.371239] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.371239] vgaarb: loaded
[ 0.371239] EDAC MC: Ver: 3.0.0
[ 0.371239] NetLabel: Initializing
[ 0.371239] NetLabel: domain hash size = 128
[ 0.371239] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.371239] NetLabel: unlabeled traffic allowed by default
[ 0.371239] PCI: Using ACPI for IRQ routing
[ 0.378500] PCI: pci_cache_line_size set to 64 bytes
[ 0.378574] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.378576] e820: reserve RAM buffer [mem 0xbad93000-0xbbffffff]
[ 0.378578] e820: reserve RAM buffer [mem 0xbae06000-0xbbffffff]
[ 0.378579] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.378581] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[ 0.379652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.379660] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.381700] clocksource: Switched to clocksource tsc-early
[ 0.389478] VFS: Disk quotas dquot_6.6.0
[ 0.389496] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.389624] AppArmor: AppArmor Filesystem Enabled
[ 0.389645] pnp: PnP ACPI init
[ 0.389792] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.389794] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.389796] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.389797] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.389798] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.389806] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.389942] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.389943] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 0.389945] system 00:01: [io 0x0a20-0x0a2f] has been reserved
[ 0.389949] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.390237] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.390290] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.390295] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.390435] pnp 00:04: [dma 0 disabled]
[ 0.390483] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.390651] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.390653] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.390654] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.390656] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.390658] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.390660] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.390661] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.390663] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.390667] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.390727] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.390732] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.390914] pnp: PnP ACPI: found 7 devices
[ 0.396885] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.396953] NET: Registered protocol family 2
[ 0.397073] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.398519] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.398580] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.398782] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.398893] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.398950] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.398984] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.399401] NET: Registered protocol family 1
[ 0.399408] NET: Registered protocol family 44
[ 0.399429] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.399434] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.399443] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.399449] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.399455] pci 0000:00:1c.1: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.399463] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.399468] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 0.399479] pci 0000:03:00.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.399498] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[ 0.399501] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.399506] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.399515] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.399517] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.399518] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.399519] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.399521] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.399522] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.399523] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[ 0.399525] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.399526] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.399527] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.399529] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.399530] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.399531] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
[ 0.399533] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.399534] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
[ 0.399535] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
[ 0.399536] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.399538] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.399539] pci_bus 0000:03: resource 10 [mem 0xbfa00000-0xffffffff window]
[ 0.399540] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.399542] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.399543] pci_bus 0000:04: resource 4 [io 0xd000-0xdfff]
[ 0.399544] pci_bus 0000:04: resource 5 [mem 0xfe400000-0xfe4fffff]
[ 0.399545] pci_bus 0000:04: resource 6 [io 0x0000-0x03af window]
[ 0.399546] pci_bus 0000:04: resource 7 [io 0x03e0-0x0cf7 window]
[ 0.399548] pci_bus 0000:04: resource 8 [io 0x03b0-0x03df window]
[ 0.399549] pci_bus 0000:04: resource 9 [io 0x0d00-0xffff window]
[ 0.399550] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff window]
[ 0.399551] pci_bus 0000:04: resource 11 [mem 0x000c0000-0x000dffff window]
[ 0.399553] pci_bus 0000:04: resource 12 [mem 0xbfa00000-0xffffffff window]
[ 0.399632] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.399647] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.400122] PCI: CLS 64 bytes, default 64
[ 0.400175] Trying to unpack rootfs image as initramfs...
[ 0.978394] Freeing initrd memory: 36548K
[ 0.978399] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.978401] software IO TLB: mapped [mem 0x00000000b6d93000-0x00000000bad93000] (64MB)
[ 0.978833] Initialise system trusted keyrings
[ 0.978844] Key type blacklist registered
[ 0.978901] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.980100] zbud: loaded
[ 0.980271] integrity: Platform Keyring initialized
[ 0.980273] Key type asymmetric registered
[ 0.980275] Asymmetric key parser 'x509' registered
[ 0.980283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.980327] io scheduler mq-deadline registered
[ 0.980600] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 0.980720] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 0.980892] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[ 0.980980] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.980993] intel_idle: MWAIT substates: 0x1120
[ 0.980994] intel_idle: v0.5.1 model 0x2A
[ 0.981083] intel_idle: Local APIC timer is reliable in all C-states
[ 0.981740] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.981743] ACPI: Thermal Zone [THRM] (35 C)
[ 0.981906] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.982077] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.983187] Linux agpgart interface v0.103
[ 0.983223] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.983411] i8042: PNP: No PS/2 controller found.
[ 0.983556] mousedev: PS/2 mouse device common for all mice
[ 0.983591] rtc_cmos 00:02: RTC can wake from S4
[ 0.983790] rtc_cmos 00:02: registered as rtc0
[ 0.983819] rtc_cmos 00:02: setting system clock to 2022-01-17T21:58:35 UTC (1642456715)
[ 0.983835] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.983846] intel_pstate: Intel P-state driver initializing
[ 0.984033] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.984288] NET: Registered protocol family 10
[ 0.993067] Segment Routing with IPv6
[ 0.993096] mip6: Mobile IPv6
[ 0.993099] NET: Registered protocol family 17
[ 0.993137] mpls_gso: MPLS GSO support
[ 0.993307] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.993315] microcode: Microcode Update Driver: v2.2.
[ 0.993320] IPI shorthand broadcast: enabled
[ 0.993330] sched_clock: Marking stable (991238764, 2005204)->(1221106917, -227862949)
[ 0.993446] registered taskstats version 1
[ 0.993448] Loading compiled-in X.509 certificates
[ 1.039786] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.039804] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.039828] zswap: loaded using pool lzo/zbud
[ 1.039993] Key type ._fscrypt registered
[ 1.039994] Key type .fscrypt registered
[ 1.039995] Key type fscrypt-provisioning registered
[ 1.040033] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.041697] Freeing unused kernel image (initmem) memory: 2408K
[ 1.053873] Write protecting the kernel read-only data: 22528k
[ 1.054526] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.054713] Freeing unused kernel image (rodata/data gap) memory: 628K
[ 1.120567] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.120569] x86/mm: Checking user space page tables
[ 1.180452] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.180521] Run /init as init process
[ 1.180523] with arguments:
[ 1.180524] /init
[ 1.180525] with environment:
[ 1.180526] HOME=/
[ 1.180527] TERM=linux
[ 1.180528] BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64
[ 1.276801] epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com> (unofficial 2.4.x kernel port, version 2.1, Sept 11, 2006)
[ 1.276836] ACPI: bus type USB registered
[ 1.276865] usbcore: registered new interface driver usbfs
[ 1.276874] usbcore: registered new interface driver hub
[ 1.276887] usbcore: registered new device driver usb
[ 1.277174] epic100 0000:04:00.0: MII transceiver #3 control 3000 status 7849.
[ 1.278173] epic100 0000:04:00.0: Autonegotiation advertising 01e1 link partner 0001.
[ 1.283871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.284717] ehci-pci: EHCI PCI platform driver
[ 1.284852] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.284860] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.284873] ehci-pci 0000:00:1a.0: debug port 2
[ 1.288781] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.289736] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe607000
[ 1.292776] epic100 0000:04:00.0 eth0: SMSC EPIC/100 83c170 at d100, IRQ 18, 00:e0:29:62:43:c0
[ 1.301114] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.301509] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 1.302053] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.302118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.302120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.302121] usb usb1: Product: EHCI Host Controller
[ 1.302122] usb usb1: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd
[ 1.302124] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.302256] hub 1-0:1.0: USB hub found
[ 1.302264] hub 1-0:1.0: 2 ports detected
[ 1.302527] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.302533] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.302546] ehci-pci 0000:00:1d.0: debug port 2
[ 1.306452] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.306999] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.307546] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 1.310371] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe606000
[ 1.324208] SCSI subsystem initialized
[ 1.325850] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.325951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.325953] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.325954] usb usb2: Product: EHCI Host Controller
[ 1.325955] usb usb2: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd
[ 1.325957] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.326094] hub 2-0:1.0: USB hub found
[ 1.326102] hub 2-0:1.0: 2 ports detected
[ 1.333009] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.333018] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 1.336080] epic100 0000:04:00.0 eth1: renamed from eth0
[ 1.341703] libphy: r8169: probed
[ 1.343865] xhci_hcd 0000:02:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 1.344128] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.344131] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.344132] usb usb3: Product: xHCI Host Controller
[ 1.344133] usb usb3: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[ 1.344134] usb usb3: SerialNumber: 0000:02:00.0
[ 1.344315] hub 3-0:1.0: USB hub found
[ 1.344375] hub 3-0:1.0: 2 ports detected
[ 1.344592] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.344596] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 1.344600] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 1.345285] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.345309] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.345310] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.345311] usb usb4: Product: xHCI Host Controller
[ 1.345312] usb usb4: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[ 1.345313] usb usb4: SerialNumber: 0000:02:00.0
[ 1.345473] hub 4-0:1.0: USB hub found
[ 1.345534] hub 4-0:1.0: 2 ports detected
[ 1.351409] libata version 3.00 loaded.
[ 1.354378] r8169 0000:01:00.0 eth0: RTL8168e/8111e, 00:30:67:c4:67:6f, XID 2c2, IRQ 27
[ 1.354381] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.359656] ahci 0000:00:1f.2: version 3.0
[ 1.369964] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.369968] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.406566] scsi host0: ahci
[ 1.406926] scsi host1: ahci
[ 1.407235] scsi host2: ahci
[ 1.407360] scsi host3: ahci
[ 1.407498] scsi host4: ahci
[ 1.407607] scsi host5: ahci
[ 1.407659] ata1: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605100 irq 31
[ 1.407662] ata2: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605180 irq 31
[ 1.407664] ata3: DUMMY
[ 1.407664] ata4: DUMMY
[ 1.407667] ata5: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605300 irq 31
[ 1.407670] ata6: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605380 irq 31
[ 1.557872] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.581867] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.718327] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.718331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.718702] hub 1-1:1.0: USB hub found
[ 1.718946] hub 1-1:1.0: 4 ports detected
[ 1.720413] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.720458] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.720547] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.720930] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.721386] ata1.00: ATA-8: WDC WD2002FAEX-00MJRA0, 01.01L01, max UDMA/133
[ 1.721390] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.723218] ata1.00: configured for UDMA/133
[ 1.723405] scsi 0:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 1L01 PQ: 0 ANSI: 5
[ 1.738167] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.738171] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.738529] hub 2-1:1.0: USB hub found
[ 1.738690] hub 2-1:1.0: 6 ports detected
[ 1.758322] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 1.758326] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.808208] ata2.00: configured for UDMA/133
[ 1.808378] scsi 1:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 1.818783] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.818797] sd 0:0:0:0: [sda] Write Protect is off
[ 1.818799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.818817] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.819310] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.819313] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.819324] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.819326] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.819343] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.856355] sda: sda1 sda2
[ 1.861366] sdb: sdb1 sdb2
[ 1.866053] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.874025] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.993850] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ 1.993858] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
[ 1.993870] clocksource: Switched to clocksource tsc
[ 2.005851] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.023272] random: fast init done
[ 2.034673] md/raid1:md0: active with 2 out of 2 mirrors
[ 2.034699] md0: detected capacity change from 0 to 1995264819200
[ 2.083472] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.108947] device-mapper: uevent: version 1.0.3
[ 2.109088] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 2.110095] random: lvm: uninitialized urandom read (2 bytes read)
[ 2.115541] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=8d11, bcdDevice= 1.00
[ 2.115545] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.115547] usb 1-1.1: Product: Photosmart D110 series
[ 2.115548] usb 1-1.1: Manufacturer: HP
[ 2.115549] usb 1-1.1: SerialNumber: CN13SG31BH05N9
[ 2.123829] usb-storage 1-1.1:1.3: USB Mass Storage device detected
[ 2.127576] scsi host6: usb-storage 1-1.1:1.3
[ 2.127686] usbcore: registered new interface driver usb-storage
[ 2.129572] usbcore: registered new interface driver uas
[ 2.193837] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[ 2.308040] usb 1-1.3: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[ 2.308044] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.308046] usb 1-1.3: Product: Dell USB Keyboard
[ 2.308047] usb 1-1.3: Manufacturer: Dell
[ 2.316508] hid: raw HID events driver (C) Jiri Kosina
[ 2.323573] usbcore: registered new interface driver usbhid
[ 2.323575] usbhid: USB HID core driver
[ 2.325985] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0001/input/input0
[ 2.385846] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[ 2.385990] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[ 2.499041] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[ 2.499046] usb 1-1.4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.499048] usb 1-1.4: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.499050] usb 1-1.4: Manufacturer: Microsoft
[ 2.502110] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:0040.0002/input/input1
[ 2.502433] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.4/input0
[ 2.785830] raid6: sse2x4 gen() 10436 MB/s
[ 2.853827] raid6: sse2x4 xor() 6145 MB/s
[ 2.921830] raid6: sse2x2 gen() 11547 MB/s
[ 2.989827] raid6: sse2x2 xor() 6231 MB/s
[ 3.057829] raid6: sse2x1 gen() 9166 MB/s
[ 3.125827] raid6: sse2x1 xor() 5719 MB/s
[ 3.125828] raid6: using algorithm sse2x2 gen() 11547 MB/s
[ 3.125829] raid6: .... xor() 6231 MB/s, rmw enabled
[ 3.125830] raid6: using ssse3x2 recovery algorithm
[ 3.126869] xor: measuring software checksum speed
[ 3.127559] prefetch64-sse : 14314 MB/sec
[ 3.128305] generic_sse : 13185 MB/sec
[ 3.128306] xor: using function: prefetch64-sse (14314 MB/sec)
[ 3.129090] async_tx: api initialized (async)
[ 3.146592] scsi 6:0:0:0: Direct-Access HP Photosmart D110 1.00 PQ: 0 ANSI: 5
[ 3.162697] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.179421] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.228685] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.302066] PM: Image not found (code -22)
[ 3.496686] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.641322] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.793385] random: crng init done
[ 4.340321] systemd[1]: Inserted module 'autofs4'
[ 4.435119] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 4.453987] systemd[1]: Detected architecture x86-64.
[ 4.467472] systemd[1]: Set hostname to <precession>.
[ 5.600932] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.602202] systemd[1]: Created slice system-getty.slice.
[ 5.602520] systemd[1]: Created slice system-modprobe.slice.
[ 5.602822] systemd[1]: Created slice system-postfix.slice.
[ 5.603067] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.603282] systemd[1]: Created slice User and Session Slice.
[ 5.603414] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.603499] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.603703] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.603759] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.603811] systemd[1]: Reached target Slices.
[ 5.603834] systemd[1]: Reached target TLS tunnels for network services - per-config-file target.
[ 5.603935] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.611291] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.623000] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 5.627173] systemd[1]: Listening on Syslog Socket.
[ 5.627321] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.627408] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.627622] systemd[1]: Listening on Journal Audit Socket.
[ 5.627731] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.627868] systemd[1]: Listening on Journal Socket.
[ 5.628030] systemd[1]: Listening on udev Control Socket.
[ 5.628133] systemd[1]: Listening on udev Kernel Socket.
[ 5.629063] systemd[1]: Mounting Huge Pages File System...
[ 5.630068] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.631186] systemd[1]: Mounting Kernel Debug File System...
[ 5.632166] systemd[1]: Mounting Kernel Trace File System...
[ 5.632394] systemd[1]: Finished Availability of block devices.
[ 5.633473] systemd[1]: Starting Set the console keyboard layout...
[ 5.634588] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.638759] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.639864] systemd[1]: Starting Load Kernel Module configfs...
[ 5.640950] systemd[1]: Starting Load Kernel Module drm...
[ 5.643202] systemd[1]: Starting Load Kernel Module fuse...
[ 5.664727] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.664786] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 5.666664] systemd[1]: Starting Journal Service...
[ 5.706988] fuse: init (API version 7.32)
[ 5.715755] systemd[1]: Starting Load Kernel Modules...
[ 5.716649] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.717547] systemd[1]: Starting Coldplug All udev Devices...
[ 5.719820] systemd[1]: Mounted Huge Pages File System.
[ 5.719958] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.720067] systemd[1]: Mounted Kernel Debug File System.
[ 5.720171] systemd[1]: Mounted Kernel Trace File System.
[ 5.721023] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 5.721494] systemd[1]: modprobe@configfs.service: Succeeded.
[ 5.721766] systemd[1]: Finished Load Kernel Module configfs.
[ 5.722142] systemd[1]: modprobe@drm.service: Succeeded.
[ 5.722380] systemd[1]: Finished Load Kernel Module drm.
[ 5.722693] systemd[1]: modprobe@fuse.service: Succeeded.
[ 5.722914] systemd[1]: Finished Load Kernel Module fuse.
[ 5.724191] systemd[1]: Mounting FUSE Control File System...
[ 5.725229] systemd[1]: Mounting Kernel Configuration File System...
[ 5.728450] systemd[1]: Mounted Kernel Configuration File System.
[ 5.734314] systemd[1]: Mounted FUSE Control File System.
[ 5.743549] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 5.790170] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 5.793158] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.804765] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 5.805712] systemd[1]: Starting Create System Users...
[ 5.841013] systemd[1]: Finished Set the console keyboard layout.
[ 5.881470] systemd[1]: Started Journal Service.
[ 6.041891] loop: module loaded
[ 6.380176] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.393991] ACPI: Power Button [PWRB]
[ 6.394064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.394119] ACPI: Power Button [PWRF]
[ 6.415870] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.416244] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.416293] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.438555] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.451550] iTCO_vendor_support: vendor-support=0
[ 6.488722] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.488764] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.488880] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.526605] at24 0-0050: supply vcc not found, using dummy regulator
[ 6.527218] at24 0-0050: 256 byte spd EEPROM, read-only
[ 6.527246] at24 0-0052: supply vcc not found, using dummy regulator
[ 6.527841] at24 0-0052: 256 byte spd EEPROM, read-only
[ 6.673041] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 6.673043] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.673044] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.673045] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 6.692075] cryptd: max_cpu_qlen set to 1000
[ 6.733639] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 6.734096] Console: switching to colour dummy device 80x25
[ 6.735398] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.753960] usblp 1-1.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8D11
[ 6.753989] usbcore: registered new interface driver usblp
[ 6.758863] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 6.946601] fbcon: i915drmfb (fb0) is primary device
[ 7.046339] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.046340] intel_rapl_common: Found RAPL domain package
[ 7.046341] intel_rapl_common: Found RAPL domain core
[ 7.046342] intel_rapl_common: Found RAPL domain uncore
[ 7.046467] Console: switching to colour frame buffer device 240x67
[ 7.067360] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 7.110360] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.110365] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.110367] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.110368] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 7.110369] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 7.110370] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 7.110385] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 7.110386] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 7.110388] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 7.162395] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 7.162447] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.162493] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.162539] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.162585] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.162630] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.485856] Adding 409596k swap on /dev/mapper/precession-swap. Priority:-2 extents:1 across:409596k FS
[ 7.664847] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
[ 7.704238] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[ 7.704247] ext2 filesystem being mounted at /tmp supports timestamps until 2038 (0x7fffffff)
[ 7.861262] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.915952] systemd-journald[281]: Received client request to flush runtime journal.
[ 8.025891] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.125615] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.570976] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 8.571745] RTL8211DN Gigabit Ethernet r8169-0-100:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-100:00, irq=IGNORE)
[ 8.806852] r8169 0000:01:00.0 eth0: Link is Down
[ 9.565015] Process accounting resumed
[ 10.989565] r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 10.989579] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7196.321109] i915 0000:00:02.0: [drm] GPU HANG: ecode 6:2:bb8ffff6, in systemd-logind [662]
[ 7196.326937] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on bcs0
[ 7199.293656] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 7727.284783] i915 0000:00:02.0: [drm] GPU HANG: ecode 6:0:00000000
[ 7727.286007] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on bcs0
--
CJ Fearnley | LinuxForce Inc.
cjf@LinuxForce.net | Hosting and Linux Consulting
https://www.LinuxForce.net | https://blog.LinuxForce.net
Reply to: