[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#982056: marked as done (cgroup: cgroup2: unknown option "memory_recursiveprot")



Your message dated Sat, 6 Feb 2021 12:15:35 +0100
with message-id <YB56V4uvKbP27yE/@eldamar.lan>
and subject line Re: Bug#982056: cgroup: cgroup2: unknown option "memory_recursiveprot"
has caused the Debian Bug report #982056,
regarding cgroup: cgroup2: unknown option "memory_recursiveprot"
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
982056: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=982056
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 4.19.171-2
Severity: normal

On my notebook boot use this version kernel,there is this error info display:

cgroup: cgroup2: unknown option "memory_recursiveprot"

This error info don't display in other version kernel.



-- Package-specific info:
** Version:
Linux version 4.19.0-14-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.171-2 (2021-01-30)

** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-14-rt-amd64 root=UUID=328e6c55-ebc0-4f3b-bd6d-bb97d31387c5 ro quiet

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: Timi
product_name: TM1612
product_version: 
chassis_vendor: Timi
chassis_version: Chassis Version
bios_vendor: INSYDE Corp.
bios_version: A05
board_vendor: Timi
board_name: TM1612
board_version: MP

** Loaded modules:
hidp
ctr
ccm
rfcomm
cmac
bnep
binfmt_misc
nls_utf8
isofs
nls_ascii
nls_cp437
vfat
loop
fat
uvcvideo
btusb
btrtl
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
btbcm
btintel
videobuf2_common
bluetooth
videodev
media
drbg
ansi_cprng
ecdh_generic
intel_rapl
wmi_bmof
x86_pkg_temp_thermal
intel_powerclamp
coretemp
snd_hda_codec_hdmi
kvm_intel
snd_hda_codec_realtek
arc4
joydev
snd_hda_codec_generic
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
iwlmvm
evdev
intel_cstate
mac80211
intel_uncore
intel_rapl_perf
sg
iwlwifi
serio_raw
iTCO_wdt
pcspkr
iTCO_vendor_support
cfg80211
rfkill
idma64
snd_soc_skl
snd_soc_skl_ipc
snd_soc_sst_ipc
snd_soc_sst_dsp
snd_hda_ext_core
snd_soc_acpi_intel_match
snd_soc_acpi
snd_soc_core
snd_compress
battery
snd_hda_intel
int3403_thermal
intel_hid
snd_hda_codec
sparse_keymap
ac
snd_hda_core
wmi
snd_hwdep
i915
snd_pcm
snd_timer
pcc_cpufreq
video
int3400_thermal
mei_me
processor_thermal_device
snd
acpi_thermal_rel
acpi_pad
drm_kms_helper
int340x_thermal_zone
soundcore
mei
intel_soc_dts_iosf
i2c_algo_bit
button
drm
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
hid_rmi
rmi_core
hid_generic
sd_mod
i2c_designware_platform
i2c_designware_core
crc32c_intel
ahci
xhci_pci
libahci
xhci_hcd
aesni_intel
aes_x86_64
libata
intel_lpss_pci
crypto_simd
usbcore
intel_lpss
cryptd
i2c_hid
glue_helper
i2c_i801
scsi_mod
mfd_core
usb_common
hid
fan
thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:190c] (rev 08)
	Subsystem: Xiaomi Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 515 [8086:191e] (rev 07) (prog-if 00 [VGA controller])
	Subsystem: Xiaomi HD Graphics 515 [1d72:1501]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 132
	Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 3000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 08)
	Subsystem: Xiaomi Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1120000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
	Subsystem: Xiaomi Sunrise Point-LP USB 3.0 xHCI Controller [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 123
	Region 0: Memory at b1100000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1132000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at b1133000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP CSME HECI [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 131
	Region 0: Memory at b1134000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0])
	Subsystem: Xiaomi Sunrise Point-LP SATA Controller [AHCI mode] [1d72:1501]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 122
	Region 0: Memory at b1130000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at b1137000 (32-bit, non-prefetchable) [size=256]
	Region 2: I/O ports at 3080 [size=8]
	Region 3: I/O ports at 3088 [size=4]
	Region 4: I/O ports at 3060 [size=32]
	Region 5: Memory at b1135000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: b1000000-b10fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation LPC/eSPI Controller [8086:9d46] (rev 21)
	Subsystem: Xiaomi LPC/eSPI Controller [1d72:1501]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP PMC [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at b112c000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP HD Audio [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 134
	Region 0: Memory at b1128000 (64-bit, non-prefetchable) [size=16K]
	Region 4: Memory at b1110000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP SMBus [1d72:1501]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1136000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 3040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
	Subsystem: Intel Corporation Wireless 8260 [8086:9010]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 133
	Region 0: Memory at b1000000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b59a Chicony Electronics Co., Ltd 
Bus 001 Device 002: ID 8087:0a2b Intel Corp. Bluetooth wireless interface
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 10.8
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-14-rt-amd64 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8), LANGUAGE=zh_CN:zh (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-14-rt-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133+deb10u1
ii  kmod                                    26-1
ii  linux-base                              4.6

Versions of packages linux-image-4.19.0-14-rt-amd64 recommends:
ii  apparmor             2.13.2-10
ii  firmware-linux-free  3.4

Versions of packages linux-image-4.19.0-14-rt-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02+dfsg1-20+deb10u3
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-14-rt-amd64 is related to:
ii  firmware-amd-graphics     20200918-1~bpo10+1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
ii  firmware-brcm80211        20200918-1~bpo10+1
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20200918-1~bpo10+1
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20200918-1~bpo10+1
ii  firmware-misc-nonfree     20200918-1~bpo10+1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20200918-1~bpo10+1
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information
[    0.000000] microcode: microcode updated early to revision 0xd6, date = 2019-10-03
[    0.000000] Linux version 4.19.0-14-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.171-2 (2021-01-30)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-14-rt-amd64 root=UUID=328e6c55-ebc0-4f3b-bd6d-bb97d31387c5 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000756a2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000756a3000-0x00000000756a3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000756a4000-0x00000000756cdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000756ce000-0x0000000075779fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007577a000-0x0000000076079fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007607a000-0x000000008c28efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008c28f000-0x000000008c48efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008c48f000-0x000000008cc7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008cc7f000-0x000000008ce7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ce7f000-0x000000008cefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008cefffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cf00000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x8c500000  ESRT=0x8c4fde18  ACPI 2.0=0x8cefe014  PROP=0x73e14238 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Timi TM1612/TM1612, BIOS A05 10/20/2016
[    0.000000] tsc: Detected 1500.000 MHz processor
[    0.002682] tsc: Detected 1512.000 MHz TSC
[    0.002683] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002686] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002707] last_pfn = 0x16f000 max_arch_pfn = 0x400000000
[    0.002723] MTRR default type: uncachable
[    0.002725] MTRR fixed ranges enabled:
[    0.002727]   00000-9FFFF write-back
[    0.002728]   A0000-BFFFF uncachable
[    0.002730]   C0000-FFFFF write-protect
[    0.002731] MTRR variable ranges enabled:
[    0.002734]   0 base 0000000000 mask 7E00000000 write-back
[    0.002737]   1 base 008CF00000 mask 7FFFF00000 uncachable
[    0.002738]   2 base 008D000000 mask 7FFF000000 uncachable
[    0.002740]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.002741]   4 base 0090000000 mask 7FF0000000 uncachable
[    0.002742]   5 base 00A0000000 mask 7FE0000000 uncachable
[    0.002744]   6 base 00C0000000 mask 7FC0000000 uncachable
[    0.002745]   7 disabled
[    0.002745]   8 disabled
[    0.002746]   9 disabled
[    0.005097] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.005312] e820: update [mem 0x8cf00000-0xffffffff] usable ==> reserved
[    0.005320] last_pfn = 0x8cf00 max_arch_pfn = 0x400000000
[    0.041501] Using GB pages for direct mapping
[    0.043324] RAMDISK: [mem 0x3454b000-0x3629cfff]
[    0.043353] ACPI: Early table checksum verification disabled
[    0.043358] ACPI: RSDP 0x000000008CEFE014 000024 (v02 XMCC  )
[    0.043365] ACPI: XSDT 0x000000008CEBF188 0000FC (v01 XMCC   XMCC1501 00000000      01000013)
[    0.043375] ACPI: FACP 0x000000008CEEA000 0000F4 (v05 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043386] ACPI: DSDT 0x000000008CEC7000 01E2A7 (v02 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043391] ACPI: FACS 0x000000008CE60000 000040
[    0.043396] ACPI: UEFI 0x000000008CEFD000 000236 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043401] ACPI: UEFI 0x000000008CEFC000 000042 (v01 XMCC   XMCC1501 00000002 ACPI 00040000)
[    0.043406] ACPI: MSDM 0x000000008CEFB000 000055 (v03 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043411] ACPI: SSDT 0x000000008CEF5000 0052EE (v02 XMCC   XMCC1501 00003000 ACPI 00040000)
[    0.043417] ACPI: SSDT 0x000000008CEF1000 003377 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043422] ACPI: DBGP 0x000000008CEF0000 000034 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043427] ACPI: DBG2 0x000000008CEEF000 000054 (v00 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043432] ACPI: ASF! 0x000000008CEEE000 0000A5 (v32 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043437] ACPI: ASPT 0x000000008CEED000 000034 (v07 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043442] ACPI: BOOT 0x000000008CEEC000 000028 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043447] ACPI: DBGP 0x000000008CEEB000 000034 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043453] ACPI: HPET 0x000000008CEE9000 000038 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043458] ACPI: LPIT 0x000000008CEE8000 000094 (v01 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043462] ACPI: APIC 0x000000008CEE7000 0000BC (v03 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043467] ACPI: MCFG 0x000000008CEE6000 00003C (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043472] ACPI: SSDT 0x000000008CEC6000 0002D4 (v01 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043478] ACPI: SSDT 0x000000008CEC3000 002BAE (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043483] ACPI: SSDT 0x000000008CEC2000 0001DD (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043488] ACPI: SSDT 0x000000008CEC1000 00019A (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043493] ACPI: SSDT 0x000000008CEC0000 000B49 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043498] ACPI: SSDT 0x000000008CEBE000 0004A3 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043503] ACPI: SSDT 0x000000008CEBD000 000E73 (v02 XMCC   XMCC1501 00003000 ACPI 00040000)
[    0.043508] ACPI: DMAR 0x000000008CEBC000 0000F0 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043513] ACPI: FPDT 0x000000008CEBB000 000044 (v01 XMCC   XMCC1501 00000002 ACPI 00040000)
[    0.043518] ACPI: WPBT 0x000000008CEB9000 00004C (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043523] ACPI: BGRT 0x000000008CEB8000 000038 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043538] ACPI: Local APIC address 0xfee00000
[    0.044249] No NUMA configuration found
[    0.044252] Faking a node at [mem 0x0000000000000000-0x000000016effffff]
[    0.044266] NODE_DATA(0) allocated [mem 0x16effb000-0x16effffff]
[    0.044318] Zone ranges:
[    0.044319]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.044322]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.044324]   Normal   [mem 0x0000000100000000-0x000000016effffff]
[    0.044325]   Device   empty
[    0.044327] Movable zone start for each node
[    0.044328] Early memory node ranges
[    0.044329]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.044331]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.044332]   node   0: [mem 0x0000000000100000-0x00000000756a2fff]
[    0.044333]   node   0: [mem 0x00000000756ce000-0x0000000075779fff]
[    0.044334]   node   0: [mem 0x000000007607a000-0x000000008c28efff]
[    0.044335]   node   0: [mem 0x000000008ceff000-0x000000008cefffff]
[    0.044336]   node   0: [mem 0x0000000100000000-0x000000016effffff]
[    0.045162] Zeroed struct page in unavailable ranges: 22295 pages
[    0.045165] Initmem setup node 0 [mem 0x0000000000001000-0x000000016effffff]
[    0.045168] On node 0 totalpages: 1026281
[    0.045170]   DMA zone: 64 pages used for memmap
[    0.045171]   DMA zone: 22 pages reserved
[    0.045173]   DMA zone: 3972 pages, LIFO batch:0
[    0.045406]   DMA32 zone: 8870 pages used for memmap
[    0.045407]   DMA32 zone: 567653 pages, LIFO batch:63
[    0.082669]   Normal zone: 7104 pages used for memmap
[    0.082670]   Normal zone: 454656 pages, LIFO batch:63
[    0.108125] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[    0.108468] ACPI: PM-Timer IO Port: 0x1808
[    0.108470] ACPI: Local APIC address 0xfee00000
[    0.108483] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.108484] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.108485] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.108486] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.108487] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.108488] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.108489] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.108490] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.108525] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.108529] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.108531] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.108533] ACPI: IRQ0 used by override.
[    0.108535] ACPI: IRQ9 used by override.
[    0.108539] Using ACPI (MADT) for SMP configuration information
[    0.108541] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.108548] TSC deadline timer available
[    0.108550] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.108610] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.108613] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.108616] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[    0.108619] PM: Registered nosave memory: [mem 0x756a3000-0x756a3fff]
[    0.108620] PM: Registered nosave memory: [mem 0x756a4000-0x756cdfff]
[    0.108623] PM: Registered nosave memory: [mem 0x7577a000-0x76079fff]
[    0.108625] PM: Registered nosave memory: [mem 0x8c28f000-0x8c48efff]
[    0.108626] PM: Registered nosave memory: [mem 0x8c48f000-0x8cc7efff]
[    0.108627] PM: Registered nosave memory: [mem 0x8cc7f000-0x8ce7efff]
[    0.108628] PM: Registered nosave memory: [mem 0x8ce7f000-0x8cefefff]
[    0.108631] PM: Registered nosave memory: [mem 0x8cf00000-0x8fffffff]
[    0.108632] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.108633] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.108634] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.108634] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.108635] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[    0.108636] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.108637] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.108638] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.108639] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.108639] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.108640] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.108641] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.108642] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.108643] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.108644] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.108644] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.108645] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.108646] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.108655] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.108657] Booting paravirtualized kernel on bare hardware
[    0.108662] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.361659] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.362037] percpu: Embedded 46 pages/cpu s149120 r8192 d31104 u524288
[    0.362052] pcpu-alloc: s149120 r8192 d31104 u524288 alloc=1*2097152
[    0.362053] pcpu-alloc: [0] 0 1 2 3 
[    0.362099] Built 1 zonelists, mobility grouping on.  Total pages: 1010221
[    0.362100] Policy zone: Normal
[    0.362103] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-14-rt-amd64 root=UUID=328e6c55-ebc0-4f3b-bd6d-bb97d31387c5 ro quiet
[    0.370174] Calgary: detecting Calgary via BIOS EBDA area
[    0.370176] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.389443] Memory: 3918012K/4105124K available (10248K kernel code, 1315K rwdata, 3332K rodata, 1548K init, 2212K bss, 187112K reserved, 0K cma-reserved)
[    0.389455] random: get_random_u64 called from __kmem_cache_create+0x4c/0x500 with crng_init=0
[    0.389679] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.389701] Kernel/User page tables isolation: enabled
[    0.389820] ftrace: allocating 31894 entries in 125 pages
[    0.425573] rcu: Preemptible hierarchical RCU implementation.
[    0.425575] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.425576] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.425577] 	No expedited grace period (rcu_normal_after_boot).
[    0.425578] 	Tasks RCU enabled.
[    0.425579] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.432964] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[    0.433392] Console: colour dummy device 80x25
[    0.433401] console [tty0] enabled
[    0.433432] ACPI: Core revision 20180810
[    0.434205] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.434240] hpet clockevent registered
[    0.434297] APIC: Switch to symmetric I/O mode setup
[    0.434301] DMAR: Host address width 39
[    0.434303] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.434316] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.434318] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.434328] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.434329] DMAR: RMRR base: 0x0000008cb7b000 end: 0x0000008cb9afff
[    0.434331] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.434333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.434334] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.434336] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.434338] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.434339] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.434340] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.436258] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.436259] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.440431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.458260] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15cb6aaa5cc, max_idle_ns: 440795251989 ns
[    0.458288] Calibrating delay loop (skipped), value calculated using timer frequency.. 3024.00 BogoMIPS (lpj=6048000)
[    0.458293] pid_max: default: 32768 minimum: 301
[    0.458362] Security Framework initialized
[    0.458364] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.458399] AppArmor: AppArmor initialized
[    0.460940] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.463766] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.463807] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.463828] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.464312] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.464313] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.464344] CPU0: Thermal monitoring enabled (TM1)
[    0.464379] process: using mwait in idle threads
[    0.464384] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.464385] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.464388] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.464390] Spectre V2 : Mitigation: Full generic retpoline
[    0.464391] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.464392] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.464405] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.464406] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.464407] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.464467] SRBDS: Vulnerable: No microcode
[    0.464468] MDS: Mitigation: Clear CPU buffers
[    0.465115] Freeing SMP alternatives memory: 20K
[    0.470282] smpboot: CPU0: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.470519] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.470590] ... version:                4
[    0.470592] ... bit width:              48
[    0.470593] ... generic registers:      4
[    0.470595] ... value mask:             0000ffffffffffff
[    0.470596] ... max period:             00007fffffffffff
[    0.470598] ... fixed-purpose events:   3
[    0.470599] ... event mask:             000000070000000f
[    0.470738] rcu: Hierarchical SRCU implementation.
[    0.471753] random: crng done (trusting CPU's manufacturer)
[    0.472450] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.472557] smp: Bringing up secondary CPUs ...
[    0.472823] x86: Booting SMP configuration:
[    0.472826] .... node  #0, CPUs:      #1 #2
[    0.479772] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.479772]  #3
[    0.482659] smp: Brought up 1 node, 4 CPUs
[    0.482659] smpboot: Max logical packages: 1
[    0.482659] smpboot: Total of 4 processors activated (12096.00 BogoMIPS)
[    0.486668] devtmpfs: initialized
[    0.486668] x86/mm: Memory block size: 128MB
[    0.487766] PM: Registering ACPI NVS region [mem 0x756a3000-0x756a3fff] (4096 bytes)
[    0.487766] PM: Registering ACPI NVS region [mem 0x8cc7f000-0x8ce7efff] (2097152 bytes)
[    0.487766] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.487766] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.487766] pinctrl core: initialized pinctrl subsystem
[    0.487766] NET: Registered protocol family 16
[    0.487766] audit: initializing netlink subsys (disabled)
[    0.487766] audit: type=2000 audit(1612574811.052:1): state=initialized audit_enabled=0 res=1
[    0.487766] cpuidle: using governor ladder
[    0.487766] cpuidle: using governor menu
[    0.487766] Simple Boot Flag at 0x44 set to 0x1
[    0.487766] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.487766] ACPI: bus type PCI registered
[    0.487766] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.487766] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.487766] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.487766] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.490988] PCI: Using configuration type 1 for base access
[    0.492397] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.492397] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.492397] ACPI: Added _OSI(Module Device)
[    0.492397] ACPI: Added _OSI(Processor Device)
[    0.492397] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.492397] ACPI: Added _OSI(Processor Aggregator Device)
[    0.492397] ACPI: Added _OSI(Linux-Dell-Video)
[    0.492397] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.561129] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.570129] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.578246] ACPI: Dynamic OEM Table Load:
[    0.578301] ACPI: SSDT 0xFFFF931FE9097800 000492 (v02 PmRef  Cpu0Ist  00003000 INTL 20160108)
[    0.579290] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.580796] ACPI: Dynamic OEM Table Load:
[    0.580814] ACPI: SSDT 0xFFFF931FE92C5C00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20160108)
[    0.582974] ACPI: Dynamic OEM Table Load:
[    0.582988] ACPI: SSDT 0xFFFF931FE915C180 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20160108)
[    0.583721] ACPI: Dynamic OEM Table Load:
[    0.583734] ACPI: SSDT 0xFFFF931FE92C2000 000130 (v02 PmRef  HwpLvt   00003000 INTL 20160108)
[    0.585498] ACPI: Dynamic OEM Table Load:
[    0.585518] ACPI: SSDT 0xFFFF931FE9094000 0005AA (v02 PmRef  ApIst    00003000 INTL 20160108)
[    0.587039] ACPI: Dynamic OEM Table Load:
[    0.587054] ACPI: SSDT 0xFFFF931FE912C000 000119 (v02 PmRef  ApHwp    00003000 INTL 20160108)
[    0.587640] ACPI: Dynamic OEM Table Load:
[    0.587640] ACPI: SSDT 0xFFFF931FE92C2200 000119 (v02 PmRef  ApCst    00003000 INTL 20160108)
[    0.593231] ACPI: Interpreter enabled
[    0.593338] ACPI: (supports S0 S3 S4 S5)
[    0.593340] ACPI: Using IOAPIC for interrupt routing
[    0.593435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.594810] ACPI: Enabled 10 GPEs in block 00 to 7F
[    0.596686] ACPI: Power Resource [PG00] (on)
[    0.597553] ACPI: Power Resource [PG01] (on)
[    0.598410] ACPI: Power Resource [PG02] (on)
[    0.635099] ACPI: Power Resource [FN00] (on)
[    0.637727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.637740] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.637823] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.641997] PCI host bridge to bus 0000:00
[    0.642003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.642006] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.642009] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.642011] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.642013] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.642016] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.642018] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.642020] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.642023] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.642025] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.642027] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.642030] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.642032] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.642034] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.642037] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.642039] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.642041] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.642044] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.642048] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.642075] pci 0000:00:00.0: [8086:190c] type 00 class 0x060000
[    0.643763] pci 0000:00:02.0: [8086:191e] type 00 class 0x030000
[    0.643790] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.643804] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.643814] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.643855] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.645534] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.645563] pci 0000:00:04.0: reg 0x10: [mem 0xb1120000-0xb1127fff 64bit]
[    0.647389] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.647427] pci 0000:00:14.0: reg 0x10: [mem 0xb1100000-0xb110ffff 64bit]
[    0.647550] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.650288] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.650288] pci 0000:00:15.0: reg 0x10: [mem 0xb1132000-0xb1132fff 64bit]
[    0.656377] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.656646] pci 0000:00:15.1: reg 0x10: [mem 0xb1133000-0xb1133fff 64bit]
[    0.659194] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.659237] pci 0000:00:16.0: reg 0x10: [mem 0xb1134000-0xb1134fff 64bit]
[    0.659362] pci 0000:00:16.0: PME# supported from D3hot
[    0.661045] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.661075] pci 0000:00:17.0: reg 0x10: [mem 0xb1130000-0xb1131fff]
[    0.661088] pci 0000:00:17.0: reg 0x14: [mem 0xb1137000-0xb11370ff]
[    0.661101] pci 0000:00:17.0: reg 0x18: [io  0x3080-0x3087]
[    0.661113] pci 0000:00:17.0: reg 0x1c: [io  0x3088-0x308b]
[    0.661125] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.661137] pci 0000:00:17.0: reg 0x24: [mem 0xb1135000-0xb11357ff]
[    0.661209] pci 0000:00:17.0: PME# supported from D3hot
[    0.662923] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.663089] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.664886] pci 0000:00:1f.0: [8086:9d46] type 00 class 0x060100
[    0.666745] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.666773] pci 0000:00:1f.2: reg 0x10: [mem 0xb112c000-0xb112ffff]
[    0.668517] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.668559] pci 0000:00:1f.3: reg 0x10: [mem 0xb1128000-0xb112bfff 64bit]
[    0.668605] pci 0000:00:1f.3: reg 0x20: [mem 0xb1110000-0xb111ffff 64bit]
[    0.668676] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.668676] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.668676] pci 0000:00:1f.4: reg 0x10: [mem 0xb1136000-0xb11360ff 64bit]
[    0.668676] pci 0000:00:1f.4: reg 0x20: [io  0x3040-0x305f]
[    0.668676] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
[    0.668676] pci 0000:01:00.0: reg 0x10: [mem 0xb1000000-0xb1001fff 64bit]
[    0.668931] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.669355] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.669365] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.676528] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.678330] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.678446] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.678555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.679631] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.679631] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.679631] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.679631] vgaarb: loaded
[    0.679631] pps_core: LinuxPPS API ver. 1 registered
[    0.679631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.679631] PTP clock support registered
[    0.679631] EDAC MC: Ver: 3.0.0
[    0.679631] Registered efivars operations
[    0.679631] PCI: Using ACPI for IRQ routing
[    0.705316] PCI: pci_cache_line_size set to 64 bytes
[    0.705502] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.705506] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.705508] e820: reserve RAM buffer [mem 0x756a3000-0x77ffffff]
[    0.705511] e820: reserve RAM buffer [mem 0x7577a000-0x77ffffff]
[    0.705514] e820: reserve RAM buffer [mem 0x8c28f000-0x8fffffff]
[    0.705517] e820: reserve RAM buffer [mem 0x8cf00000-0x8fffffff]
[    0.705520] e820: reserve RAM buffer [mem 0x16f000000-0x16fffffff]
[    0.707343] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.707352] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.710278] clocksource: Switched to clocksource tsc-early
[    0.740483] VFS: Disk quotas dquot_6.6.0
[    0.740520] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.740863] AppArmor: AppArmor Filesystem Enabled
[    0.740899] pnp: PnP ACPI init
[    0.741386] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.741391] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.741395] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.741398] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.741402] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.741405] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.741409] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.741420] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.742141] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.742149] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.742716] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.742720] system 00:02: [io  0xffff] has been reserved
[    0.742724] system 00:02: [io  0xffff] has been reserved
[    0.742727] system 00:02: [io  0xffff] has been reserved
[    0.742731] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.742734] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.742742] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.742976] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.743081] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.743090] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.743147] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.745913] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.747127] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.747132] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.747135] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.747139] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.747142] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.747146] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.747150] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.747154] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[    0.747158] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.747161] system 00:07: [mem 0x90000000-0x9001ffff] has been reserved
[    0.747170] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.747818] pnp: PnP ACPI: found 8 devices
[    0.755925] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.755942] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.755958] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.755981] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.755984] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.755987] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.755989] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.755992] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.755994] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.755997] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.755999] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.756001] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.756004] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.756006] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.756008] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.756011] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.756013] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.756016] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.756018] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.756021] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
[    0.756023] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.756026] pci_bus 0000:01: resource 1 [mem 0xb1000000-0xb10fffff]
[    0.756363] NET: Registered protocol family 2
[    0.756753] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes)
[    0.756847] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.757164] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[    0.757940] TCP: Hash tables configured (established 32768 bind 32768)
[    0.758039] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[    0.758194] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[    0.758433] NET: Registered protocol family 1
[    0.758444] NET: Registered protocol family 44
[    0.758466] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.760635] PCI: CLS 64 bytes, default 64
[    0.760731] Unpacking initramfs...
[    2.001750] Freeing initrd memory: 30024K
[    2.001826] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
[    2.001833] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
[    2.001870] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.001873] software IO TLB: mapped [mem 0x8828f000-0x8c28f000] (64MB)
[    2.001922] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15cb6aaa5cc, max_idle_ns: 440795251989 ns
[    2.001952] clocksource: Switched to clocksource tsc
[    2.003633] Initialise system trusted keyrings
[    2.003659] Key type blacklist registered
[    2.003761] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    2.007766] zbud: loaded
[    2.347452] Key type asymmetric registered
[    2.347455] Asymmetric key parser 'x509' registered
[    2.347480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.347543] io scheduler noop registered
[    2.347546] io scheduler deadline registered
[    2.347624] io scheduler cfq registered (default)
[    2.347627] io scheduler mq-deadline registered
[    2.348453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.348502] efifb: probing for efifb
[    2.348546] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
[    2.348548] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    2.348549] efifb: scrolling: redraw
[    2.348552] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.357638] Console: switching to colour frame buffer device 240x67
[    2.366519] fb0: EFI VGA frame buffer device
[    2.366542] intel_idle: MWAIT substates: 0x11142120
[    2.366543] intel_idle: v0.4.1 model 0x4E
[    2.367157] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.369356] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.370524] Linux agpgart interface v0.103
[    2.370677] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.370678] AMD IOMMUv2 functionality not available on this system
[    2.371506] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.371508] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.372364] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.372970] mousedev: PS/2 mouse device common for all mice
[    2.373086] rtc_cmos 00:03: RTC can wake from S4
[    2.374055] rtc_cmos 00:03: registered as rtc0
[    2.374100] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.374126] intel_pstate: Intel P-state driver initializing
[    2.374689] intel_pstate: HWP enabled
[    2.375576] NET: Registered protocol family 10
[    2.387179] Segment Routing with IPv6
[    2.387208] mip6: Mobile IPv6
[    2.387211] NET: Registered protocol family 17
[    2.387389] mpls_gso: MPLS GSO support
[    2.387876] mce: Using 8 MCE banks
[    2.387929] microcode: sig=0x406e3, pf=0x80, revision=0xd6
[    2.388089] microcode: Microcode Update Driver: v2.2.
[    2.388103] sched_clock: Marking stable (2387173408, 910600)->(2397863663, -9779655)
[    2.388408] registered taskstats version 1
[    2.388419] Loading compiled-in X.509 certificates
[    2.389459] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.425374] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    2.425390] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    2.425410] zswap: loaded using pool lzo/zbud
[    2.425569] AppArmor: AppArmor sha1 policy hashing enabled
[    2.426855] rtc_cmos 00:03: setting system clock to 2021-02-06 01:26:53 UTC (1612574813)
[    2.428696] Freeing unused kernel image memory: 1548K
[    2.428770] Write protecting the kernel read-only data: 16384k
[    2.429661] Freeing unused kernel image memory: 2032K
[    2.429977] Freeing unused kernel image memory: 764K
[    2.438396] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.438398] x86/mm: Checking user space page tables
[    2.446007] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.446009] Run /init as init process
[    2.566885] thermal LNXTHERM:00: registered as thermal_zone0
[    2.566888] ACPI: Thermal Zone [TZ01] (27 C)
[    2.600169] hidraw: raw HID events driver (C) Jiri Kosina
[    2.622014] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.628749] cryptd: max_cpu_qlen set to 1000
[    2.636675] SCSI subsystem initialized
[    2.651098] ACPI: bus type USB registered
[    2.658063] usbcore: registered new interface driver usbfs
[    2.658598] usbcore: registered new interface driver hub
[    2.659295] usbcore: registered new device driver usb
[    2.676225] AVX2 version of gcm_enc/dec engaged.
[    2.676227] AES CTR mode by8 optimization enabled
[    2.676323] libata version 3.00 loaded.
[    2.685847] ahci 0000:00:17.0: version 3.0
[    2.718687] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.718797] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.718811] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.718853] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.718856] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    2.719485] scsi host0: ahci
[    2.719937] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    2.720187] scsi host1: ahci
[    2.720297] ata1: SATA max UDMA/133 abar m2048@0xb1135000 port 0xb1135100 irq 122
[    2.720300] ata2: SATA max UDMA/133 abar m2048@0xb1135000 port 0xb1135180 irq 122
[    2.746408] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.746918] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.746920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.746921] usb usb1: Product: xHCI Host Controller
[    2.746922] usb usb1: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd
[    2.746923] usb usb1: SerialNumber: 0000:00:14.0
[    2.767021] hub 1-0:1.0: USB hub found
[    2.767053] hub 1-0:1.0: 12 ports detected
[    2.839348] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    2.866199] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.866214] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.866225] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.866549] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    2.866556] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.866561] usb usb2: Product: xHCI Host Controller
[    2.866566] usb usb2: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd
[    2.866571] usb usb2: SerialNumber: 0000:00:14.0
[    2.867075] hub 2-0:1.0: USB hub found
[    2.867113] hub 2-0:1.0: 6 ports detected
[    2.867708] usb: port power management may be unreliable
[    3.030830] ata1: SATA link down (SStatus 4 SControl 300)
[    3.030905] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.033874] ata2.00: ATA-9: SAMSUNG MZNTY128HDHP-00000, MAT2100Q, max UDMA/133
[    3.033880] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.036361] ata2.00: configured for UDMA/133
[    3.038770] i2c_hid i2c-SYNA3105:00: i2c-SYNA3105:00 supply vdd not found, using dummy regulator
[    3.038814] i2c_hid i2c-SYNA3105:00: Linked as a consumer to regulator.0
[    3.038818] i2c_hid i2c-SYNA3105:00: i2c-SYNA3105:00 supply vddl not found, using dummy regulator
[    3.046548] ahci 0000:00:17.0: port does not support device sleep
[    3.047110] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNTY128 100Q PQ: 0 ANSI: 5
[    3.060742] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.060765] sd 1:0:0:0: [sda] Write Protect is off
[    3.060772] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.060801] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.063416]  sda: sda1 sda2 sda3 sda4 sda7
[    3.064570] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.198442] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    3.282978] input: SYNA3105:00 06CB:7EA5 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA3105:00/0018:06CB:7EA5.0001/input/input1
[    3.283269] hid-generic 0018:06CB:7EA5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3105:00 06CB:7EA5] on i2c-SYNA3105:00
[    3.348012] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    3.348018] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.478361] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    3.497974] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3242-001, fw id: 2361580
[    3.619378] input: Synaptics TM3242-001 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA3105:00/0018:06CB:7EA5.0001/input/input3
[    3.619611] hid-rmi 0018:06CB:7EA5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3105:00 06CB:7EA5] on i2c-SYNA3105:00
[    3.634384] usb 1-7: New USB device found, idVendor=04f2, idProduct=b59a, bcdDevice=34.04
[    3.634390] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.634393] usb 1-7: Product: XiaoMi USB 2.0 Webcam
[    3.634396] usb 1-7: Manufacturer: Chicony
[    3.706874] PM: Image not found (code -22)
[    3.916155] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.097465] systemd[1]: Inserted module 'autofs4'
[    4.118130] cgroup: cgroup2: unknown option "memory_recursiveprot"
[    4.192037] systemd[1]: systemd 247.2-5~bpo10+1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.211082] systemd[1]: Detected architecture x86-64.
[    4.219040] systemd[1]: Set hostname to <atzlinux>.
[    4.315879] systemd-sysv-generator[270]: SysV service '/etc/init.d/gdomap' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.316805] systemd-sysv-generator[270]: SysV service '/etc/init.d/gpm' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.330528] systemd-sysv-generator[270]: SysV service '/etc/init.d/acpi-support' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.333359] systemd-sysv-generator[270]: SysV service '/etc/init.d/hddtemp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.363051] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    4.438958] systemd[1]: Queued start job for default target Graphical Interface.
[    4.440962] systemd[1]: Created slice system-getty.slice.
[    4.441295] systemd[1]: Created slice system-modprobe.slice.
[    4.441618] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.441840] systemd[1]: Created slice User and Session Slice.
[    4.441956] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.442027] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.442430] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.442485] systemd[1]: Reached target Local Encrypted Volumes.
[    4.442522] systemd[1]: Reached target User and Group Name Lookups.
[    4.442538] systemd[1]: Reached target Remote File Systems.
[    4.442547] systemd[1]: Reached target Slices.
[    4.442762] systemd[1]: Listening on Syslog Socket.
[    4.442914] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.442987] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.443189] systemd[1]: Listening on Journal Audit Socket.
[    4.443321] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.443472] systemd[1]: Listening on Journal Socket.
[    4.443805] systemd[1]: Listening on udev Control Socket.
[    4.443932] systemd[1]: Listening on udev Kernel Socket.
[    4.444951] systemd[1]: Mounting Huge Pages File System...
[    4.446090] systemd[1]: Mounting POSIX Message Queue File System...
[    4.447772] systemd[1]: Mounting Kernel Debug File System...
[    4.449401] systemd[1]: Mounting Kernel Trace File System...
[    4.451045] systemd[1]: Starting Set the console keyboard layout...
[    4.452575] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.454693] systemd[1]: Starting Load Kernel Module configfs...
[    4.456251] systemd[1]: Starting Load Kernel Module drm...
[    4.457812] systemd[1]: Starting Load Kernel Module fuse...
[    4.458420] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.458505] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.461506] systemd[1]: Starting Journal Service...
[    4.467588] systemd[1]: Starting Load Kernel Modules...
[    4.468996] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.474584] systemd[1]: Starting Coldplug All udev Devices...
[    4.477518] fuse init (API version 7.27)
[    4.478677] systemd[1]: Mounted Huge Pages File System.
[    4.479067] systemd[1]: Mounted POSIX Message Queue File System.
[    4.479369] systemd[1]: Mounted Kernel Debug File System.
[    4.479672] systemd[1]: Mounted Kernel Trace File System.
[    4.486199] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.487055] systemd[1]: modprobe@configfs.service: Succeeded.
[    4.487442] systemd[1]: Finished Load Kernel Module configfs.
[    4.488413] systemd[1]: modprobe@fuse.service: Succeeded.
[    4.488705] systemd[1]: Finished Load Kernel Module fuse.
[    4.490470] systemd[1]: Mounting FUSE Control File System...
[    4.492145] systemd[1]: Mounting Kernel Configuration File System...
[    4.493029] systemd[1]: Finished Load Kernel Modules.
[    4.495093] systemd[1]: Starting Apply Kernel Variables...
[    4.500970] systemd[1]: Mounted FUSE Control File System.
[    4.503840] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    4.506192] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.508245] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.508329] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.510354] systemd[1]: Starting Load/Save Random Seed...
[    4.523092] systemd[1]: Starting Create System Users...
[    4.525451] systemd[1]: modprobe@drm.service: Succeeded.
[    4.525827] systemd[1]: Finished Load Kernel Module drm.
[    4.527420] systemd[1]: Mounted Kernel Configuration File System.
[    4.528088] systemd[1]: Finished Apply Kernel Variables.
[    4.538035] systemd[1]: Finished Load/Save Random Seed.
[    4.538440] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    4.556602] systemd[1]: Finished Create System Users.
[    4.558707] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.582373] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.585189] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.636677] systemd[1]: Finished Coldplug All udev Devices.
[    4.638186] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    4.644790] systemd[1]: Finished Set the console keyboard layout.
[    4.645078] systemd[1]: Reached target Local File Systems (Pre).
[    4.649475] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[    4.673216] systemd[1]: Started Journal Service.
[    5.087176] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0C:00/input/input4
[    5.102302] ACPI: Power Button [PWRB]
[    5.112788] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input5
[    5.126812] ACPI: Lid Switch [LID0]
[    5.141606] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.153716] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.166305] ACPI: Power Button [PWRF]
[    5.192784] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    5.374743] ACPI: AC Adapter [ADP0] (on-line)
[    5.379341] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[    5.379343] fb: switching to inteldrmfb from EFI VGA
[    5.379397] Console: switching to colour dummy device 80x25
[    5.394399] [drm] Replacing VGA console driver
[    5.400308] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.400310] [drm] Driver supports precise vblank timestamp query.
[    5.401103] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.404168] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_27.bin
[    5.404729] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    5.405306] acpi INT33D5:00: intel-hid: created platform device
[    5.425224] input: Intel HID events as /devices/pci0000:00/0000:00:1f.0/INT33D5:00/input/input7
[    5.456716] battery: ACPI: Battery Slot [BAT0] (battery present)
[    5.841956] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    5.877927] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    5.888344] iTCO_vendor_support: vendor-support=0
[    5.918151] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.919766] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    5.927768] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.955273] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.987367] Intel(R) Wireless WiFi driver for Linux
[    5.987369] Copyright(c) 2003- 2015 Intel Corporation
[    6.001386] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    6.003983] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.007851] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    6.007853] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.007854] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.007855] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.007855] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.007856] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    6.034678] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    6.035899] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.036145] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    6.046397] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-8000C-36.ucode
[    6.046419] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
[    6.046422] iwlwifi 0000:01:00.0: Found debug configuration: 0
[    6.047442] iwlwifi 0000:01:00.0: loaded firmware version 36.79ff3ccf.0 op_mode iwlmvm
[    6.175578] fbcon: inteldrmfb (fb0) is primary device
[    6.215221] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    6.223042] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    6.223482] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes (order 10) for firmware monitor.
[    6.290001] iwlwifi 0000:01:00.0: base HW address: a0:c5:89:47:0c:0c
[    6.443291] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.485541] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.485545] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.485548] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.485550] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.485552] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.485554] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    6.571268] thermal thermal_zone4: failed to read out thermal zone (-61)
[    6.805089] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    6.816510] Adding 1003516k swap on /dev/sda1.  Priority:-2 extents:1 across:1003516k SSFS
[    6.826998] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    6.847693] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    6.877212] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    6.879665] intel_rapl: Found RAPL domain package
[    6.879668] intel_rapl: Found RAPL domain core
[    6.879669] intel_rapl: Found RAPL domain uncore
[    6.879671] intel_rapl: Found RAPL domain dram
[    6.904055] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    6.932545] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    7.128687] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[    7.316611] Console: switching to colour frame buffer device 240x67
[    7.339174] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.391145] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    7.403365] media: Linux media interface: v0.10
[    7.453017] videodev: Linux video capture interface: v2.00
[    7.461230] Bluetooth: Core ver 2.22
[    7.461278] NET: Registered protocol family 31
[    7.461280] Bluetooth: HCI device and connection manager initialized
[    7.461285] Bluetooth: HCI socket layer initialized
[    7.461289] Bluetooth: L2CAP socket layer initialized
[    7.461310] Bluetooth: SCO socket layer initialized
[    7.586735] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    7.589178] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    7.613832] loop: module loaded
[    7.649655] uvcvideo: Found UVC 1.00 device XiaoMi USB 2.0 Webcam (04f2:b59a)
[    7.685158] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    7.686363] usbcore: registered new interface driver btusb
[    7.692150] Bluetooth: hci0: Device revision is 5
[    7.692152] Bluetooth: hci0: Secure boot is enabled
[    7.692153] Bluetooth: hci0: OTP lock is enabled
[    7.692154] Bluetooth: hci0: API lock is enabled
[    7.692155] Bluetooth: hci0: Debug lock is disabled
[    7.692156] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    7.694828] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[    7.694833] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    7.701515] ISO 9660 Extensions: Microsoft Joliet Level 3
[    7.701564] ISO 9660 Extensions: Microsoft Joliet Level 3
[    7.707788] input: XiaoMi USB 2.0 Webcam: XiaoMi U as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input16
[    7.714584] usbcore: registered new interface driver uvcvideo
[    7.714587] USB Video Class driver (1.1.1)
[    7.727016] ISO 9660 Extensions: RRIP_1991A
[    7.835216] audit: type=1400 audit(1612574818.903:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="firejail-default" pid=709 comm="apparmor_parser"
[    7.839411] audit: type=1400 audit(1612574818.907:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=711 comm="apparmor_parser"
[    7.839416] audit: type=1400 audit(1612574818.907:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=711 comm="apparmor_parser"
[    7.841360] audit: type=1400 audit(1612574818.907:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=710 comm="apparmor_parser"
[    7.841368] audit: type=1400 audit(1612574818.907:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=710 comm="apparmor_parser"
[    7.841373] audit: type=1400 audit(1612574818.907:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=710 comm="apparmor_parser"
[    7.842190] audit: type=1400 audit(1612574818.907:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=713 comm="apparmor_parser"
[    7.842769] audit: type=1400 audit(1612574818.911:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=708 comm="apparmor_parser"
[    7.842774] audit: type=1400 audit(1612574818.911:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=708 comm="apparmor_parser"
[    7.849376] audit: type=1400 audit(1612574818.915:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=714 comm="apparmor_parser"
[    8.363904] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.363907] Bluetooth: BNEP filters: protocol multicast
[    8.363912] Bluetooth: BNEP socket layer initialized
[    8.783511] broken atomic modeset userspace detected, disabling atomic
[    8.831972] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    8.840765] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    8.984898] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    9.064001] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[    9.075343] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    9.172571] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    9.248500] Bluetooth: hci0: Waiting for firmware download to complete
[    9.249105] Bluetooth: hci0: Firmware loaded in 1528288 usecs
[    9.249270] Bluetooth: hci0: Waiting for device to boot
[    9.260189] Bluetooth: hci0: Device booted in 10681 usecs
[    9.260606] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[    9.260610] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[    9.264453] Bluetooth: hci0: Applying Intel DDC parameters completed
[    9.319782] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    9.398042] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[    9.411397] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    9.558377] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   10.704922] Bluetooth: RFCOMM TTY layer initialized
[   10.704930] Bluetooth: RFCOMM socket layer initialized
[   10.704939] Bluetooth: RFCOMM ver 1.11
[   13.011071] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   14.625274] wlp1s0: authenticate with 44:f9:71:69:42:20
[   14.634526] wlp1s0: send auth to 44:f9:71:69:42:20 (try 1/3)
[   14.656719] wlp1s0: authenticated
[   14.658496] wlp1s0: associate with 44:f9:71:69:42:20 (try 1/3)
[   14.666937] wlp1s0: RX AssocResp from 44:f9:71:69:42:20 (capab=0x1011 status=0 aid=2)
[   14.670355] wlp1s0: associated
[   14.910836] wlp1s0: Limiting TX power to 35 (35 - 0) dBm as advertised by 44:f9:71:69:42:20
[   14.943098] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  471.780033] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  471.780048] Bluetooth: HIDP socket layer initialized
[  471.782512] hid-generic 0005:046D:B010.0002: unknown main item tag 0x0
[  471.782812] input: Bluetooth Mouse M557 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B010.0002/input/input17
[  471.783163] input: Bluetooth Mouse M557 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B010.0002/input/input18
[  471.783356] input: Bluetooth Mouse M557 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B010.0002/input/input21
[  471.783792] hid-generic 0005:046D:B010.0002: input,hidraw1: BLUETOOTH HID v10.02 Mouse [Bluetooth Mouse M557] on a0:c5:89:47:0c:10

--- End Message ---
--- Begin Message ---
Hi,

On Sat, Feb 06, 2021 at 10:02:06AM +0800, xiao sheng wen wrote:
> Package: src:linux
> Version: 4.19.171-2
> Severity: normal
> 
> On my notebook boot use this version kernel,there is this error info display:
> 
> cgroup: cgroup2: unknown option "memory_recursiveprot"
> 
> This error info don't display in other version kernel.

>From the attached log you seem to run systemd from buster-backports
(247.2-5~bpo10+1). But from their NEWS in the changes done with 247:

        * The cgroup2 file system is now mounted with the
          "memory_recursiveprot" mount option, supported since kernel 5.7. This
          means that the MemoryLow= and MemoryMin= unit file settings now apply
          recursively to whole subtrees.

The support for thi was only added in 5.7-rc1 so if you need this you
will need as well the kernel from buster-backports.

Regards,
Salvatore

--- End Message ---

Reply to: