[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#980214: marked as done (linux-image-5.10.0-1-arm64: please enable CONFIG_CRYPTO_NHPOLY1305_NEON)



Your message dated Sat, 06 Feb 2021 08:33:48 +0000
with message-id <E1l8J2K-0006mk-2D@fasolo.debian.org>
and subject line Bug#980214: fixed in linux 5.10.13-1
has caused the Debian Bug report #980214,
regarding linux-image-5.10.0-1-arm64: please enable CONFIG_CRYPTO_NHPOLY1305_NEON
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
980214: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=980214
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 5.10.4-1
Severity: normal

Dear Maintainer,

Please enable CONFIG_CRYPTO_NHPOLY1305_NEON as a module for arm64 builds of
the Linux kernel. This allows platforms that do not support AES instructions
(such as Raspberry Pi 3/4) to enable efficient block device encryption, using
the 'adiantum' template.

Kind regards,
Ard.


-- Package-specific info:
** Version:
Linux version 5.10.0-1-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-3) 10.2.1 20201224, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.4-1 (2020-12-31)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.10.0-1-arm64 root=UUID=62fa7565-f531-4b0f-9311-59cb70ba2c93 ro quiet

** Not tainted

** Kernel log:
[    3.822227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.822239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.822247] usb usb1: Product: xHCI Host Controller
[    3.822254] usb usb1: Manufacturer: Linux 5.10.0-1-arm64 xhci-hcd
[    3.822261] usb usb1: SerialNumber: PNP0D10:00
[    3.822910] hub 1-0:1.0: USB hub found
[    3.822979] hub 1-0:1.0: 1 port detected
[    3.823542] xhci-hcd PNP0D10:00: xHCI Host Controller
[    3.823572] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
[    3.823591] xhci-hcd PNP0D10:00: Host supports USB 3.0 SuperSpeed
[    3.823752] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.823936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    3.823945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.823953] usb usb2: Product: xHCI Host Controller
[    3.823960] usb usb2: Manufacturer: Linux 5.10.0-1-arm64 xhci-hcd
[    3.823966] usb usb2: SerialNumber: PNP0D10:00
[    3.824623] hub 2-0:1.0: USB hub found
[    3.824677] hub 2-0:1.0: 4 ports detected
[    3.838859] bcmgenet BCM6E4E:00 enabcm6e4ei0: renamed from eth0
[    4.157943] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    4.312580] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    4.312595] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.312603] usb 1-1: Product: USB2.0 Hub
[    4.314265] hub 1-1:1.0: USB hub found
[    4.314540] hub 1-1:1.0: 4 ports detected
[    4.438232] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    4.460809] usb 2-2: New USB device found, idVendor=18a5, idProduct=0237, bcdDevice= 5.10
[    4.460819] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.460827] usb 2-2: Product: Portable USB 3.0 Drive
[    4.460835] usb 2-2: Manufacturer: Verbatim
[    4.460842] usb 2-2: SerialNumber: 1407010003245394
[    4.498931] SCSI subsystem initialized
[    4.513467] usb-storage 2-2:1.0: USB Mass Storage device detected
[    4.514813] scsi host0: usb-storage 2-2:1.0
[    4.515356] usbcore: registered new interface driver usb-storage
[    4.520563] usbcore: registered new interface driver uas
[    4.673929] libphy: bcmgenet MII bus: probed
[    4.673945] unimac-mdio unimac-mdio: Broadcom UniMAC MDIO bus
[    5.535323] scsi 0:0:0:0: Direct-Access     Samsung  SSD 850 PRO      EXM0 PQ: 0 ANSI: 6
[    5.556933] sd 0:0:0:0: [sda] 500118188 512-byte logical blocks: (256 GB/238 GiB)
[    5.557351] sd 0:0:0:0: [sda] Write Protect is off
[    5.557362] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    5.557768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.576531]  sda: sda1 sda2
[    5.578991] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.612373] random: fast init done
[    6.084383] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.358453] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    6.530927] systemd[1]: Inserted module 'autofs4'
[    6.593403] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.594215] systemd[1]: Detected architecture arm64.
[    6.622998] systemd[1]: Set hostname to <rpi4>.
[    7.062138] random: systemd: uninitialized urandom read (16 bytes read)
[    7.067659] random: systemd: uninitialized urandom read (16 bytes read)
[    7.071927] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.072502] random: systemd: uninitialized urandom read (16 bytes read)
[    7.072985] systemd[1]: Listening on Journal Audit Socket.
[    7.073615] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.075141] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.076570] systemd[1]: Created slice User and Session Slice.
[    7.076698] systemd[1]: Reached target Slices.
[    7.077261] systemd[1]: Listening on udev Kernel Socket.
[    7.230826] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.446370] systemd-journald[220]: Received request to flush runtime journal from PID 1
[    7.956977] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.064863] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    8.140177] cryptd: max_cpu_qlen set to 1000
[    8.572745] random: crng init done
[    8.572758] random: 7 urandom warning(s) missed due to ratelimiting
[    8.626854] Bluetooth: Core ver 2.22
[    8.627007] NET: Registered protocol family 31
[    8.627015] Bluetooth: HCI device and connection manager initialized
[    8.628647] Bluetooth: HCI socket layer initialized
[    8.628663] Bluetooth: L2CAP socket layer initialized
[    8.628699] Bluetooth: SCO socket layer initialized
[    8.702144] Bluetooth: HCI UART driver ver 2.3
[    8.702159] Bluetooth: HCI UART protocol H4 registered
[    8.702296] Bluetooth: HCI UART protocol LL registered
[    8.702304] Bluetooth: HCI UART protocol ATH3K registered
[    8.702367] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.702570] Bluetooth: HCI UART protocol Intel registered
[    8.702882] Bluetooth: HCI UART protocol Broadcom registered
[    8.702953] Bluetooth: HCI UART protocol QCA registered
[    8.702960] Bluetooth: HCI UART protocol AG6XX registered
[    8.703006] Bluetooth: HCI UART protocol Marvell registered
[    8.764517] audit: type=1400 audit(1604510514.143:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=426 comm="apparmor_parser"
[    8.764549] audit: type=1400 audit(1604510514.143:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=426 comm="apparmor_parser"
[    8.765026] audit: type=1400 audit(1604510514.151:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=427 comm="apparmor_parser"
[    8.765048] audit: type=1400 audit(1604510514.151:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=427 comm="apparmor_parser"
[    8.765065] audit: type=1400 audit(1604510514.151:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=427 comm="apparmor_parser"
[    8.783189] audit: type=1400 audit(1604510514.171:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session" pid=425 comm="apparmor_parser"
[    8.783216] audit: type=1400 audit(1604510514.171:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=425 comm="apparmor_parser"
[    9.501478] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    9.501491] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    9.914262] bcmgenet BCM6E4E:00: configuring instance for external RGMII (RX delay)
[    9.914619] bcmgenet BCM6E4E:00 enabcm6e4ei0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.914849] IPv6: ADDRCONF(NETDEV_CHANGE): enabcm6e4ei0: link becomes ready
[   10.175742] NET: Registered protocol family 5
[142340.069707] tun: Universal TUN/TAP device driver, 1.6
[1173543.653652] NET: Registered protocol family 38

** Model information

** Loaded modules:
nhpoly1305
adiantum
libpoly1305
ecb
xts
twofish_generic
twofish_common
serpent_generic
cbc
algif_skcipher
af_alg
tun
appletalk
psnap
llc
wireguard
libchacha20poly1305
chacha_neon
poly1305_neon
ip6_udp_tunnel
udp_tunnel
libblake2s
libcurve25519_generic
libchacha
libblake2s_generic
nft_counter
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nft_compat
nf_tables
libcrc32c
hci_uart
nfnetlink
btqca
btrtl
btbcm
btintel
bluetooth
nls_ascii
nls_cp437
vfat
fat
jitterentropy_rng
aes_neon_bs
aes_neon_blk
crypto_simd
cryptd
drbg
aes_arm64
aes_generic
ansi_cprng
sg
ecdh_generic
rfkill
ecc
libaes
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
uas
usb_storage
scsi_mod
broadcom
bcm_phy_lib
mdio_bcm_unimac
xhci_plat_hcd
xhci_hcd
genet
of_mdio
crct10dif_ce
fixed_phy
usbcore
crct10dif_common
libphy
usb_common

** PCI devices:

** USB devices:
Bus 002 Device 002: ID 18a5:0237 Verbatim, Ltd Portable Harddrive
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 10.7
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: arm64 (aarch64)

Kernel: Linux 5.10.0-1-arm64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-1-arm64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133+deb10u1
ii  kmod                                    26-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-1-arm64 recommends:
ii  apparmor             2.13.2-10
ii  firmware-linux-free  3.4

Versions of packages linux-image-5.10.0-1-arm64 suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-1-arm64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 5.10.13-1
Done: Salvatore Bonaccorso <carnil@debian.org>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 980214@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Salvatore Bonaccorso <carnil@debian.org> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Sat, 06 Feb 2021 09:23:52 +0100
Source: linux
Architecture: source
Version: 5.10.13-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Salvatore Bonaccorso <carnil@debian.org>
Closes: 980214
Changes:
 linux (5.10.13-1) unstable; urgency=medium
 .
   * New upstream stable update:
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.13
     - iwlwifi: provide gso_type to GSO packets
     - nbd: freeze the queue while we're adding connections (CVE-2021-3348)
     - tty: avoid using vfs_iocb_iter_write() for redirected console writes
     - ACPI: sysfs: Prefer "compatible" modalias
     - ACPI: thermal: Do not call acpi_thermal_check() directly
     - kernel: kexec: remove the lock operation of system_transition_mutex
     - ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256
     - ALSA: hda/via: Apply the workaround generically for Clevo machines
     - [arm64,armhf] media: cedrus: Fix H264 decoding
     - media: rc: fix timeout handling after switch to microsecond durations
     - [x86] media: rc: ite-cir: fix min_timeout calculation
     - media: rc: ensure that uevent can be read directly after rc device
       register
     - [armhf] dts: tbs2910: rename MMC node aliases
     - wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
     - [amd64] ASoC: AMD Renoir - refine DMI entries for some Lenovo products
     - drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
     - [x86] drm/i915: Always flush the active worker before returning from the
       wait
     - [x86] drm/i915/gt: Always try to reserve GGTT address 0x0
     - drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
     - bcache: only check feature sets when sb->version >=
       BCACHE_SB_VERSION_CDEV_WITH_FEATURES
     - net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem
       family
     - [s390x] uv: Fix sysfs max number of VCPUs reporting
     - PM: hibernate: flush swap writer after marking
     - [x86] efi/apple-properties: Reinstate support for boolean properties
     - btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
     - btrfs: fix possible free space tree corruption with online conversion
     - [x86] KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in
       intel_arch_events[]
     - [x86] KVM: x86/pmu: Fix UBSAN shift-out-of-bounds warning in
       intel_pmu_refresh()
     - [arm64] KVM: Filter out v8.1+ events on v8.0 HW
     - [x86] KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit
     - [x86] KVM: x86: allow KVM_REQ_GET_NESTED_STATE_PAGES outside guest mode
       for VMX
     - [x86] KVM: nVMX: Sync unsync'd vmcs02 state to vmcs12 on migration
     - [x86] KVM: get smi pending status correctly
     - KVM: Forbid the use of tagged userspace addresses for memslots
     - io_uring: fix wqe->lock/completion_lock deadlock
     - leds: trigger: fix potential deadlock with libata
     - mt7601u: fix kernel crash unplugging the device
     - mt7601u: fix rx buffer refcounting
     - iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.
     - [x86] drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
     - [x86] drm/i915/pmu: Don't grab wakeref when enabling events
     - [arm*] drm/vc4: Correct lbm size and calculation
     - [arm*] drm/vc4: Correct POS1_SCL for hvs5
     - drm/nouveau/dispnv50: Restore pushing of all data.
     - [x86] drm/i915: Check for all subplatform bits
     - uapi: fix big endian definition of ipv6_rpl_sr_hdr
     - KVM: Documentation: Fix spec for KVM_CAP_ENABLE_CAP_VM
     - [arm64] tee: optee: replace might_sleep with cond_resched
     - xen-blkfront: allow discard-* nodes to be optional
     - blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
     - [armhf] imx: build suspend-imx6.S with arm instruction set
     - netfilter: nft_dynset: add timeout extension to template
     - Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion"
     - Revert "block: simplify set_init_blocksize" to regain lost performance
     - xfrm: Fix oops in xfrm_replay_advance_bmp
     - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
     - xfrm: Fix wraparound in xfrm_policy_addr_delta()
     - RDMA/cxgb4: Fix the reported max_recv_sge value
     - [arm64] ASoC: qcom: Fix incorrect volatile registers
     - [arm64] ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY
     - [x86] ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete
     - [powerpc*] 64s: prevent recursive replay_soft_interrupts causing
       superfluous interrupt
     - pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
     - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
     - ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
     - ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup
     - iwlwifi: pcie: avoid potential PNVM leaks
     - iwlwifi: pnvm: don't skip everything when not reloading
     - iwlwifi: pnvm: don't try to load after failures
     - iwlwifi: pcie: set LTR on more devices
     - iwlwifi: pcie: use jiffies for memory read spin time limit
     - iwlwifi: pcie: reschedule in long-running memory reads
     - mac80211: pause TX while changing interface type
     - ice: fix FDir IPv6 flexbyte
     - ice: Implement flow for IPv6 next header (extension header)
     - ice: update dev_addr in ice_set_mac_address even if HW filter exists
     - ice: Don't allow more channels than LAN MSI-X available
     - ice: Fix MSI-X vector fallback logic
     - i40e: acquire VSI pointer only after VF is initialized
     - igc: fix link speed advertising
     - net/mlx5: Fix memory leak on flow table creation error flow
     - net/mlx5e: E-switch, Fix rate calculation for overflow
     - net/mlx5e: free page before return
     - net/mlx5e: Reduce tc unsupported key print level
     - net/mlx5: Maintain separate page trees for ECPF and PF functions
     - net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
     - net/mlx5e: Fix CT rule + encap slow path offload and deletion
     - net/mlx5e: Correctly handle changing the number of queues when the
       interface is down
     - net/mlx5e: Revert parameters on errors when changing trust state without
       reset
     - net/mlx5e: Revert parameters on errors when changing MTU and LRO state
       without reset
     - can: dev: prevent potential information leak in can_fill_info()
     - [arm64] ACPI/IORT: Do not blindly trust DMA masks from firmware
     - of/device: Update dma_range_map only when dev has valid dma-ranges
     - [amd64] iommu/amd: Use IVHD EFR for early initialization of IOMMU
       features
     - [amd64] iommu/vt-d: Correctly check addr alignment in
       qi_flush_dev_iotlb_pasid()
     - nvme-multipath: Early exit if no path is available
     - rxrpc: Fix memory leak in rxrpc_lookup_local
     - NFC: fix resource leak when target index is invalid
     - NFC: fix possible resource leak
     - [x86] ASoC: topology: Properly unregister DAI on removal
     - [x86] ASoC: topology: Fix memory corruption in
       soc_tplg_denum_create_values()
     - scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit
     - team: protect features update by RCU to avoid deadlock
     - tcp: make TCP_USER_TIMEOUT accurate for zero window probes
     - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN
     - vsock: fix the race conditions in multi-transport support
       (CVE-2021-26708)
 .
   [ Salvatore Bonaccorso ]
   * arch/s390: uv_info: Ignore ABI changes
 .
   [ Vincent Blut ]
   * [arm64] Enable CRYPTO_NHPOLY1305_NEON. (closes: #980214)
   * [armhf] Enable KERNEL_MODE_NEON.
Checksums-Sha1:
 c2f824d2358a0e1d48cf26c53db45480159def1c 195000 linux_5.10.13-1.dsc
 758975dac538868546abf102daf883cd7e15ed27 121445856 linux_5.10.13.orig.tar.xz
 10b82510f07d799884a23c61504767f7eeb39758 4005688 linux_5.10.13-1.debian.tar.xz
 01a84a54f505b41f02ca9360baaa1412207074a8 6278 linux_5.10.13-1_source.buildinfo
Checksums-Sha256:
 910a5b687678ae2f3655923d411c42dac8a71a477269794154096fb4982a2f35 195000 linux_5.10.13-1.dsc
 c04de3551864e52485fd100249df430840c995c9263aaa552b1b527d48f867ca 121445856 linux_5.10.13.orig.tar.xz
 6fef4385cf488885f5ce5f9fc5b45b220f0ed426173305a5ce13683c19116ec0 4005688 linux_5.10.13-1.debian.tar.xz
 17f67bf83206257408f8d7ea47e89d3c136fa84456a81dbb3c9cb65719b2ad9b 6278 linux_5.10.13-1_source.buildinfo
Files:
 a3b6cec7f331f236da8e18f2de04188a 195000 kernel optional linux_5.10.13-1.dsc
 0b73ec08162bcdff4fc4473b98b2a4ed 121445856 kernel optional linux_5.10.13.orig.tar.xz
 4b1ba48e27384f20c2f061923dac46f5 4005688 kernel optional linux_5.10.13-1.debian.tar.xz
 16af5761877f615f3bf51b7bbd94b2a3 6278 kernel optional linux_5.10.13-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=UTKs
-----END PGP SIGNATURE-----

--- End Message ---

Reply to: