[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#982056: cgroup: cgroup2: unknown option "memory_recursiveprot"



Package: src:linux
Version: 4.19.171-2
Severity: normal

On my notebook boot use this version kernel,there is this error info display:

cgroup: cgroup2: unknown option "memory_recursiveprot"

This error info don't display in other version kernel.



-- Package-specific info:
** Version:
Linux version 4.19.0-14-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.171-2 (2021-01-30)

** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-14-rt-amd64 root=UUID=328e6c55-ebc0-4f3b-bd6d-bb97d31387c5 ro quiet

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: Timi
product_name: TM1612
product_version: 
chassis_vendor: Timi
chassis_version: Chassis Version
bios_vendor: INSYDE Corp.
bios_version: A05
board_vendor: Timi
board_name: TM1612
board_version: MP

** Loaded modules:
hidp
ctr
ccm
rfcomm
cmac
bnep
binfmt_misc
nls_utf8
isofs
nls_ascii
nls_cp437
vfat
loop
fat
uvcvideo
btusb
btrtl
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
btbcm
btintel
videobuf2_common
bluetooth
videodev
media
drbg
ansi_cprng
ecdh_generic
intel_rapl
wmi_bmof
x86_pkg_temp_thermal
intel_powerclamp
coretemp
snd_hda_codec_hdmi
kvm_intel
snd_hda_codec_realtek
arc4
joydev
snd_hda_codec_generic
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
iwlmvm
evdev
intel_cstate
mac80211
intel_uncore
intel_rapl_perf
sg
iwlwifi
serio_raw
iTCO_wdt
pcspkr
iTCO_vendor_support
cfg80211
rfkill
idma64
snd_soc_skl
snd_soc_skl_ipc
snd_soc_sst_ipc
snd_soc_sst_dsp
snd_hda_ext_core
snd_soc_acpi_intel_match
snd_soc_acpi
snd_soc_core
snd_compress
battery
snd_hda_intel
int3403_thermal
intel_hid
snd_hda_codec
sparse_keymap
ac
snd_hda_core
wmi
snd_hwdep
i915
snd_pcm
snd_timer
pcc_cpufreq
video
int3400_thermal
mei_me
processor_thermal_device
snd
acpi_thermal_rel
acpi_pad
drm_kms_helper
int340x_thermal_zone
soundcore
mei
intel_soc_dts_iosf
i2c_algo_bit
button
drm
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
hid_rmi
rmi_core
hid_generic
sd_mod
i2c_designware_platform
i2c_designware_core
crc32c_intel
ahci
xhci_pci
libahci
xhci_hcd
aesni_intel
aes_x86_64
libata
intel_lpss_pci
crypto_simd
usbcore
intel_lpss
cryptd
i2c_hid
glue_helper
i2c_i801
scsi_mod
mfd_core
usb_common
hid
fan
thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:190c] (rev 08)
	Subsystem: Xiaomi Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 515 [8086:191e] (rev 07) (prog-if 00 [VGA controller])
	Subsystem: Xiaomi HD Graphics 515 [1d72:1501]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 132
	Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 3000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 08)
	Subsystem: Xiaomi Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1120000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
	Subsystem: Xiaomi Sunrise Point-LP USB 3.0 xHCI Controller [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 123
	Region 0: Memory at b1100000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1132000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at b1133000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP CSME HECI [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 131
	Region 0: Memory at b1134000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0])
	Subsystem: Xiaomi Sunrise Point-LP SATA Controller [AHCI mode] [1d72:1501]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 122
	Region 0: Memory at b1130000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at b1137000 (32-bit, non-prefetchable) [size=256]
	Region 2: I/O ports at 3080 [size=8]
	Region 3: I/O ports at 3088 [size=4]
	Region 4: I/O ports at 3060 [size=32]
	Region 5: Memory at b1135000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: b1000000-b10fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation LPC/eSPI Controller [8086:9d46] (rev 21)
	Subsystem: Xiaomi LPC/eSPI Controller [1d72:1501]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP PMC [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at b112c000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP HD Audio [1d72:1501]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 134
	Region 0: Memory at b1128000 (64-bit, non-prefetchable) [size=16K]
	Region 4: Memory at b1110000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
	Subsystem: Xiaomi Sunrise Point-LP SMBus [1d72:1501]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1136000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 3040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
	Subsystem: Intel Corporation Wireless 8260 [8086:9010]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 133
	Region 0: Memory at b1000000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b59a Chicony Electronics Co., Ltd 
Bus 001 Device 002: ID 8087:0a2b Intel Corp. Bluetooth wireless interface
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 10.8
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-14-rt-amd64 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8), LANGUAGE=zh_CN:zh (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-14-rt-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133+deb10u1
ii  kmod                                    26-1
ii  linux-base                              4.6

Versions of packages linux-image-4.19.0-14-rt-amd64 recommends:
ii  apparmor             2.13.2-10
ii  firmware-linux-free  3.4

Versions of packages linux-image-4.19.0-14-rt-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02+dfsg1-20+deb10u3
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-14-rt-amd64 is related to:
ii  firmware-amd-graphics     20200918-1~bpo10+1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
ii  firmware-brcm80211        20200918-1~bpo10+1
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20200918-1~bpo10+1
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20200918-1~bpo10+1
ii  firmware-misc-nonfree     20200918-1~bpo10+1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20200918-1~bpo10+1
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information
[    0.000000] microcode: microcode updated early to revision 0xd6, date = 2019-10-03
[    0.000000] Linux version 4.19.0-14-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.171-2 (2021-01-30)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-14-rt-amd64 root=UUID=328e6c55-ebc0-4f3b-bd6d-bb97d31387c5 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000756a2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000756a3000-0x00000000756a3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000756a4000-0x00000000756cdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000756ce000-0x0000000075779fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007577a000-0x0000000076079fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007607a000-0x000000008c28efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008c28f000-0x000000008c48efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008c48f000-0x000000008cc7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008cc7f000-0x000000008ce7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ce7f000-0x000000008cefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008cefffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cf00000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x8c500000  ESRT=0x8c4fde18  ACPI 2.0=0x8cefe014  PROP=0x73e14238 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Timi TM1612/TM1612, BIOS A05 10/20/2016
[    0.000000] tsc: Detected 1500.000 MHz processor
[    0.002682] tsc: Detected 1512.000 MHz TSC
[    0.002683] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002686] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002707] last_pfn = 0x16f000 max_arch_pfn = 0x400000000
[    0.002723] MTRR default type: uncachable
[    0.002725] MTRR fixed ranges enabled:
[    0.002727]   00000-9FFFF write-back
[    0.002728]   A0000-BFFFF uncachable
[    0.002730]   C0000-FFFFF write-protect
[    0.002731] MTRR variable ranges enabled:
[    0.002734]   0 base 0000000000 mask 7E00000000 write-back
[    0.002737]   1 base 008CF00000 mask 7FFFF00000 uncachable
[    0.002738]   2 base 008D000000 mask 7FFF000000 uncachable
[    0.002740]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.002741]   4 base 0090000000 mask 7FF0000000 uncachable
[    0.002742]   5 base 00A0000000 mask 7FE0000000 uncachable
[    0.002744]   6 base 00C0000000 mask 7FC0000000 uncachable
[    0.002745]   7 disabled
[    0.002745]   8 disabled
[    0.002746]   9 disabled
[    0.005097] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.005312] e820: update [mem 0x8cf00000-0xffffffff] usable ==> reserved
[    0.005320] last_pfn = 0x8cf00 max_arch_pfn = 0x400000000
[    0.041501] Using GB pages for direct mapping
[    0.043324] RAMDISK: [mem 0x3454b000-0x3629cfff]
[    0.043353] ACPI: Early table checksum verification disabled
[    0.043358] ACPI: RSDP 0x000000008CEFE014 000024 (v02 XMCC  )
[    0.043365] ACPI: XSDT 0x000000008CEBF188 0000FC (v01 XMCC   XMCC1501 00000000      01000013)
[    0.043375] ACPI: FACP 0x000000008CEEA000 0000F4 (v05 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043386] ACPI: DSDT 0x000000008CEC7000 01E2A7 (v02 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043391] ACPI: FACS 0x000000008CE60000 000040
[    0.043396] ACPI: UEFI 0x000000008CEFD000 000236 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043401] ACPI: UEFI 0x000000008CEFC000 000042 (v01 XMCC   XMCC1501 00000002 ACPI 00040000)
[    0.043406] ACPI: MSDM 0x000000008CEFB000 000055 (v03 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043411] ACPI: SSDT 0x000000008CEF5000 0052EE (v02 XMCC   XMCC1501 00003000 ACPI 00040000)
[    0.043417] ACPI: SSDT 0x000000008CEF1000 003377 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043422] ACPI: DBGP 0x000000008CEF0000 000034 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043427] ACPI: DBG2 0x000000008CEEF000 000054 (v00 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043432] ACPI: ASF! 0x000000008CEEE000 0000A5 (v32 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043437] ACPI: ASPT 0x000000008CEED000 000034 (v07 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043442] ACPI: BOOT 0x000000008CEEC000 000028 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043447] ACPI: DBGP 0x000000008CEEB000 000034 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043453] ACPI: HPET 0x000000008CEE9000 000038 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043458] ACPI: LPIT 0x000000008CEE8000 000094 (v01 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043462] ACPI: APIC 0x000000008CEE7000 0000BC (v03 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043467] ACPI: MCFG 0x000000008CEE6000 00003C (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043472] ACPI: SSDT 0x000000008CEC6000 0002D4 (v01 XMCC   XMCC1501 00000000 ACPI 00040000)
[    0.043478] ACPI: SSDT 0x000000008CEC3000 002BAE (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043483] ACPI: SSDT 0x000000008CEC2000 0001DD (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043488] ACPI: SSDT 0x000000008CEC1000 00019A (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043493] ACPI: SSDT 0x000000008CEC0000 000B49 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043498] ACPI: SSDT 0x000000008CEBE000 0004A3 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
[    0.043503] ACPI: SSDT 0x000000008CEBD000 000E73 (v02 XMCC   XMCC1501 00003000 ACPI 00040000)
[    0.043508] ACPI: DMAR 0x000000008CEBC000 0000F0 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043513] ACPI: FPDT 0x000000008CEBB000 000044 (v01 XMCC   XMCC1501 00000002 ACPI 00040000)
[    0.043518] ACPI: WPBT 0x000000008CEB9000 00004C (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043523] ACPI: BGRT 0x000000008CEB8000 000038 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
[    0.043538] ACPI: Local APIC address 0xfee00000
[    0.044249] No NUMA configuration found
[    0.044252] Faking a node at [mem 0x0000000000000000-0x000000016effffff]
[    0.044266] NODE_DATA(0) allocated [mem 0x16effb000-0x16effffff]
[    0.044318] Zone ranges:
[    0.044319]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.044322]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.044324]   Normal   [mem 0x0000000100000000-0x000000016effffff]
[    0.044325]   Device   empty
[    0.044327] Movable zone start for each node
[    0.044328] Early memory node ranges
[    0.044329]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.044331]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.044332]   node   0: [mem 0x0000000000100000-0x00000000756a2fff]
[    0.044333]   node   0: [mem 0x00000000756ce000-0x0000000075779fff]
[    0.044334]   node   0: [mem 0x000000007607a000-0x000000008c28efff]
[    0.044335]   node   0: [mem 0x000000008ceff000-0x000000008cefffff]
[    0.044336]   node   0: [mem 0x0000000100000000-0x000000016effffff]
[    0.045162] Zeroed struct page in unavailable ranges: 22295 pages
[    0.045165] Initmem setup node 0 [mem 0x0000000000001000-0x000000016effffff]
[    0.045168] On node 0 totalpages: 1026281
[    0.045170]   DMA zone: 64 pages used for memmap
[    0.045171]   DMA zone: 22 pages reserved
[    0.045173]   DMA zone: 3972 pages, LIFO batch:0
[    0.045406]   DMA32 zone: 8870 pages used for memmap
[    0.045407]   DMA32 zone: 567653 pages, LIFO batch:63
[    0.082669]   Normal zone: 7104 pages used for memmap
[    0.082670]   Normal zone: 454656 pages, LIFO batch:63
[    0.108125] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[    0.108468] ACPI: PM-Timer IO Port: 0x1808
[    0.108470] ACPI: Local APIC address 0xfee00000
[    0.108483] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.108484] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.108485] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.108486] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.108487] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.108488] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.108489] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.108490] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.108525] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.108529] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.108531] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.108533] ACPI: IRQ0 used by override.
[    0.108535] ACPI: IRQ9 used by override.
[    0.108539] Using ACPI (MADT) for SMP configuration information
[    0.108541] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.108548] TSC deadline timer available
[    0.108550] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.108610] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.108613] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.108616] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[    0.108619] PM: Registered nosave memory: [mem 0x756a3000-0x756a3fff]
[    0.108620] PM: Registered nosave memory: [mem 0x756a4000-0x756cdfff]
[    0.108623] PM: Registered nosave memory: [mem 0x7577a000-0x76079fff]
[    0.108625] PM: Registered nosave memory: [mem 0x8c28f000-0x8c48efff]
[    0.108626] PM: Registered nosave memory: [mem 0x8c48f000-0x8cc7efff]
[    0.108627] PM: Registered nosave memory: [mem 0x8cc7f000-0x8ce7efff]
[    0.108628] PM: Registered nosave memory: [mem 0x8ce7f000-0x8cefefff]
[    0.108631] PM: Registered nosave memory: [mem 0x8cf00000-0x8fffffff]
[    0.108632] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.108633] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.108634] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.108634] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.108635] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[    0.108636] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.108637] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.108638] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.108639] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.108639] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.108640] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.108641] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.108642] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.108643] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.108644] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.108644] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.108645] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.108646] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.108655] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.108657] Booting paravirtualized kernel on bare hardware
[    0.108662] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.361659] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.362037] percpu: Embedded 46 pages/cpu s149120 r8192 d31104 u524288
[    0.362052] pcpu-alloc: s149120 r8192 d31104 u524288 alloc=1*2097152
[    0.362053] pcpu-alloc: [0] 0 1 2 3 
[    0.362099] Built 1 zonelists, mobility grouping on.  Total pages: 1010221
[    0.362100] Policy zone: Normal
[    0.362103] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-14-rt-amd64 root=UUID=328e6c55-ebc0-4f3b-bd6d-bb97d31387c5 ro quiet
[    0.370174] Calgary: detecting Calgary via BIOS EBDA area
[    0.370176] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.389443] Memory: 3918012K/4105124K available (10248K kernel code, 1315K rwdata, 3332K rodata, 1548K init, 2212K bss, 187112K reserved, 0K cma-reserved)
[    0.389455] random: get_random_u64 called from __kmem_cache_create+0x4c/0x500 with crng_init=0
[    0.389679] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.389701] Kernel/User page tables isolation: enabled
[    0.389820] ftrace: allocating 31894 entries in 125 pages
[    0.425573] rcu: Preemptible hierarchical RCU implementation.
[    0.425575] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.425576] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.425577] 	No expedited grace period (rcu_normal_after_boot).
[    0.425578] 	Tasks RCU enabled.
[    0.425579] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.432964] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[    0.433392] Console: colour dummy device 80x25
[    0.433401] console [tty0] enabled
[    0.433432] ACPI: Core revision 20180810
[    0.434205] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.434240] hpet clockevent registered
[    0.434297] APIC: Switch to symmetric I/O mode setup
[    0.434301] DMAR: Host address width 39
[    0.434303] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.434316] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.434318] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.434328] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.434329] DMAR: RMRR base: 0x0000008cb7b000 end: 0x0000008cb9afff
[    0.434331] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.434333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.434334] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.434336] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.434338] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.434339] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.434340] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.436258] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.436259] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.440431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.458260] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15cb6aaa5cc, max_idle_ns: 440795251989 ns
[    0.458288] Calibrating delay loop (skipped), value calculated using timer frequency.. 3024.00 BogoMIPS (lpj=6048000)
[    0.458293] pid_max: default: 32768 minimum: 301
[    0.458362] Security Framework initialized
[    0.458364] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.458399] AppArmor: AppArmor initialized
[    0.460940] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.463766] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.463807] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.463828] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.464312] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.464313] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.464344] CPU0: Thermal monitoring enabled (TM1)
[    0.464379] process: using mwait in idle threads
[    0.464384] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.464385] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.464388] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.464390] Spectre V2 : Mitigation: Full generic retpoline
[    0.464391] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.464392] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.464405] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.464406] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.464407] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.464467] SRBDS: Vulnerable: No microcode
[    0.464468] MDS: Mitigation: Clear CPU buffers
[    0.465115] Freeing SMP alternatives memory: 20K
[    0.470282] smpboot: CPU0: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.470519] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.470590] ... version:                4
[    0.470592] ... bit width:              48
[    0.470593] ... generic registers:      4
[    0.470595] ... value mask:             0000ffffffffffff
[    0.470596] ... max period:             00007fffffffffff
[    0.470598] ... fixed-purpose events:   3
[    0.470599] ... event mask:             000000070000000f
[    0.470738] rcu: Hierarchical SRCU implementation.
[    0.471753] random: crng done (trusting CPU's manufacturer)
[    0.472450] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.472557] smp: Bringing up secondary CPUs ...
[    0.472823] x86: Booting SMP configuration:
[    0.472826] .... node  #0, CPUs:      #1 #2
[    0.479772] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.479772]  #3
[    0.482659] smp: Brought up 1 node, 4 CPUs
[    0.482659] smpboot: Max logical packages: 1
[    0.482659] smpboot: Total of 4 processors activated (12096.00 BogoMIPS)
[    0.486668] devtmpfs: initialized
[    0.486668] x86/mm: Memory block size: 128MB
[    0.487766] PM: Registering ACPI NVS region [mem 0x756a3000-0x756a3fff] (4096 bytes)
[    0.487766] PM: Registering ACPI NVS region [mem 0x8cc7f000-0x8ce7efff] (2097152 bytes)
[    0.487766] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.487766] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.487766] pinctrl core: initialized pinctrl subsystem
[    0.487766] NET: Registered protocol family 16
[    0.487766] audit: initializing netlink subsys (disabled)
[    0.487766] audit: type=2000 audit(1612574811.052:1): state=initialized audit_enabled=0 res=1
[    0.487766] cpuidle: using governor ladder
[    0.487766] cpuidle: using governor menu
[    0.487766] Simple Boot Flag at 0x44 set to 0x1
[    0.487766] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.487766] ACPI: bus type PCI registered
[    0.487766] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.487766] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.487766] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.487766] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.490988] PCI: Using configuration type 1 for base access
[    0.492397] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.492397] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.492397] ACPI: Added _OSI(Module Device)
[    0.492397] ACPI: Added _OSI(Processor Device)
[    0.492397] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.492397] ACPI: Added _OSI(Processor Aggregator Device)
[    0.492397] ACPI: Added _OSI(Linux-Dell-Video)
[    0.492397] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.561129] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.570129] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.578246] ACPI: Dynamic OEM Table Load:
[    0.578301] ACPI: SSDT 0xFFFF931FE9097800 000492 (v02 PmRef  Cpu0Ist  00003000 INTL 20160108)
[    0.579290] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.580796] ACPI: Dynamic OEM Table Load:
[    0.580814] ACPI: SSDT 0xFFFF931FE92C5C00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20160108)
[    0.582974] ACPI: Dynamic OEM Table Load:
[    0.582988] ACPI: SSDT 0xFFFF931FE915C180 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20160108)
[    0.583721] ACPI: Dynamic OEM Table Load:
[    0.583734] ACPI: SSDT 0xFFFF931FE92C2000 000130 (v02 PmRef  HwpLvt   00003000 INTL 20160108)
[    0.585498] ACPI: Dynamic OEM Table Load:
[    0.585518] ACPI: SSDT 0xFFFF931FE9094000 0005AA (v02 PmRef  ApIst    00003000 INTL 20160108)
[    0.587039] ACPI: Dynamic OEM Table Load:
[    0.587054] ACPI: SSDT 0xFFFF931FE912C000 000119 (v02 PmRef  ApHwp    00003000 INTL 20160108)
[    0.587640] ACPI: Dynamic OEM Table Load:
[    0.587640] ACPI: SSDT 0xFFFF931FE92C2200 000119 (v02 PmRef  ApCst    00003000 INTL 20160108)
[    0.593231] ACPI: Interpreter enabled
[    0.593338] ACPI: (supports S0 S3 S4 S5)
[    0.593340] ACPI: Using IOAPIC for interrupt routing
[    0.593435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.594810] ACPI: Enabled 10 GPEs in block 00 to 7F
[    0.596686] ACPI: Power Resource [PG00] (on)
[    0.597553] ACPI: Power Resource [PG01] (on)
[    0.598410] ACPI: Power Resource [PG02] (on)
[    0.635099] ACPI: Power Resource [FN00] (on)
[    0.637727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.637740] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.637823] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.641997] PCI host bridge to bus 0000:00
[    0.642003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.642006] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.642009] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.642011] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.642013] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.642016] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.642018] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.642020] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.642023] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.642025] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.642027] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.642030] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.642032] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.642034] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.642037] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.642039] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.642041] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.642044] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.642048] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.642075] pci 0000:00:00.0: [8086:190c] type 00 class 0x060000
[    0.643763] pci 0000:00:02.0: [8086:191e] type 00 class 0x030000
[    0.643790] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.643804] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.643814] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.643855] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.645534] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.645563] pci 0000:00:04.0: reg 0x10: [mem 0xb1120000-0xb1127fff 64bit]
[    0.647389] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.647427] pci 0000:00:14.0: reg 0x10: [mem 0xb1100000-0xb110ffff 64bit]
[    0.647550] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.650288] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.650288] pci 0000:00:15.0: reg 0x10: [mem 0xb1132000-0xb1132fff 64bit]
[    0.656377] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.656646] pci 0000:00:15.1: reg 0x10: [mem 0xb1133000-0xb1133fff 64bit]
[    0.659194] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.659237] pci 0000:00:16.0: reg 0x10: [mem 0xb1134000-0xb1134fff 64bit]
[    0.659362] pci 0000:00:16.0: PME# supported from D3hot
[    0.661045] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.661075] pci 0000:00:17.0: reg 0x10: [mem 0xb1130000-0xb1131fff]
[    0.661088] pci 0000:00:17.0: reg 0x14: [mem 0xb1137000-0xb11370ff]
[    0.661101] pci 0000:00:17.0: reg 0x18: [io  0x3080-0x3087]
[    0.661113] pci 0000:00:17.0: reg 0x1c: [io  0x3088-0x308b]
[    0.661125] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.661137] pci 0000:00:17.0: reg 0x24: [mem 0xb1135000-0xb11357ff]
[    0.661209] pci 0000:00:17.0: PME# supported from D3hot
[    0.662923] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.663089] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.664886] pci 0000:00:1f.0: [8086:9d46] type 00 class 0x060100
[    0.666745] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.666773] pci 0000:00:1f.2: reg 0x10: [mem 0xb112c000-0xb112ffff]
[    0.668517] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.668559] pci 0000:00:1f.3: reg 0x10: [mem 0xb1128000-0xb112bfff 64bit]
[    0.668605] pci 0000:00:1f.3: reg 0x20: [mem 0xb1110000-0xb111ffff 64bit]
[    0.668676] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.668676] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.668676] pci 0000:00:1f.4: reg 0x10: [mem 0xb1136000-0xb11360ff 64bit]
[    0.668676] pci 0000:00:1f.4: reg 0x20: [io  0x3040-0x305f]
[    0.668676] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
[    0.668676] pci 0000:01:00.0: reg 0x10: [mem 0xb1000000-0xb1001fff 64bit]
[    0.668931] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.669355] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.669365] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.676528] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.676528] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.678330] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.678446] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.678555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.679631] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.679631] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.679631] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.679631] vgaarb: loaded
[    0.679631] pps_core: LinuxPPS API ver. 1 registered
[    0.679631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.679631] PTP clock support registered
[    0.679631] EDAC MC: Ver: 3.0.0
[    0.679631] Registered efivars operations
[    0.679631] PCI: Using ACPI for IRQ routing
[    0.705316] PCI: pci_cache_line_size set to 64 bytes
[    0.705502] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.705506] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.705508] e820: reserve RAM buffer [mem 0x756a3000-0x77ffffff]
[    0.705511] e820: reserve RAM buffer [mem 0x7577a000-0x77ffffff]
[    0.705514] e820: reserve RAM buffer [mem 0x8c28f000-0x8fffffff]
[    0.705517] e820: reserve RAM buffer [mem 0x8cf00000-0x8fffffff]
[    0.705520] e820: reserve RAM buffer [mem 0x16f000000-0x16fffffff]
[    0.707343] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.707352] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.710278] clocksource: Switched to clocksource tsc-early
[    0.740483] VFS: Disk quotas dquot_6.6.0
[    0.740520] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.740863] AppArmor: AppArmor Filesystem Enabled
[    0.740899] pnp: PnP ACPI init
[    0.741386] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.741391] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.741395] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.741398] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.741402] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.741405] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.741409] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.741420] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.742141] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.742149] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.742716] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.742720] system 00:02: [io  0xffff] has been reserved
[    0.742724] system 00:02: [io  0xffff] has been reserved
[    0.742727] system 00:02: [io  0xffff] has been reserved
[    0.742731] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.742734] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.742742] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.742976] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.743081] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.743090] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.743147] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.745913] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.747127] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.747132] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.747135] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.747139] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.747142] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.747146] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.747150] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.747154] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[    0.747158] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.747161] system 00:07: [mem 0x90000000-0x9001ffff] has been reserved
[    0.747170] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.747818] pnp: PnP ACPI: found 8 devices
[    0.755925] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.755942] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.755958] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.755981] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.755984] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.755987] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.755989] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.755992] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.755994] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.755997] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.755999] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.756001] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.756004] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.756006] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.756008] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.756011] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.756013] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.756016] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.756018] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.756021] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
[    0.756023] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.756026] pci_bus 0000:01: resource 1 [mem 0xb1000000-0xb10fffff]
[    0.756363] NET: Registered protocol family 2
[    0.756753] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes)
[    0.756847] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.757164] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[    0.757940] TCP: Hash tables configured (established 32768 bind 32768)
[    0.758039] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[    0.758194] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[    0.758433] NET: Registered protocol family 1
[    0.758444] NET: Registered protocol family 44
[    0.758466] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.760635] PCI: CLS 64 bytes, default 64
[    0.760731] Unpacking initramfs...
[    2.001750] Freeing initrd memory: 30024K
[    2.001826] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
[    2.001833] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
[    2.001870] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.001873] software IO TLB: mapped [mem 0x8828f000-0x8c28f000] (64MB)
[    2.001922] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15cb6aaa5cc, max_idle_ns: 440795251989 ns
[    2.001952] clocksource: Switched to clocksource tsc
[    2.003633] Initialise system trusted keyrings
[    2.003659] Key type blacklist registered
[    2.003761] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    2.007766] zbud: loaded
[    2.347452] Key type asymmetric registered
[    2.347455] Asymmetric key parser 'x509' registered
[    2.347480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.347543] io scheduler noop registered
[    2.347546] io scheduler deadline registered
[    2.347624] io scheduler cfq registered (default)
[    2.347627] io scheduler mq-deadline registered
[    2.348453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.348502] efifb: probing for efifb
[    2.348546] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
[    2.348548] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    2.348549] efifb: scrolling: redraw
[    2.348552] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.357638] Console: switching to colour frame buffer device 240x67
[    2.366519] fb0: EFI VGA frame buffer device
[    2.366542] intel_idle: MWAIT substates: 0x11142120
[    2.366543] intel_idle: v0.4.1 model 0x4E
[    2.367157] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.369356] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.370524] Linux agpgart interface v0.103
[    2.370677] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.370678] AMD IOMMUv2 functionality not available on this system
[    2.371506] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.371508] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.372364] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.372970] mousedev: PS/2 mouse device common for all mice
[    2.373086] rtc_cmos 00:03: RTC can wake from S4
[    2.374055] rtc_cmos 00:03: registered as rtc0
[    2.374100] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.374126] intel_pstate: Intel P-state driver initializing
[    2.374689] intel_pstate: HWP enabled
[    2.375576] NET: Registered protocol family 10
[    2.387179] Segment Routing with IPv6
[    2.387208] mip6: Mobile IPv6
[    2.387211] NET: Registered protocol family 17
[    2.387389] mpls_gso: MPLS GSO support
[    2.387876] mce: Using 8 MCE banks
[    2.387929] microcode: sig=0x406e3, pf=0x80, revision=0xd6
[    2.388089] microcode: Microcode Update Driver: v2.2.
[    2.388103] sched_clock: Marking stable (2387173408, 910600)->(2397863663, -9779655)
[    2.388408] registered taskstats version 1
[    2.388419] Loading compiled-in X.509 certificates
[    2.389459] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.425374] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    2.425390] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    2.425410] zswap: loaded using pool lzo/zbud
[    2.425569] AppArmor: AppArmor sha1 policy hashing enabled
[    2.426855] rtc_cmos 00:03: setting system clock to 2021-02-06 01:26:53 UTC (1612574813)
[    2.428696] Freeing unused kernel image memory: 1548K
[    2.428770] Write protecting the kernel read-only data: 16384k
[    2.429661] Freeing unused kernel image memory: 2032K
[    2.429977] Freeing unused kernel image memory: 764K
[    2.438396] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.438398] x86/mm: Checking user space page tables
[    2.446007] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.446009] Run /init as init process
[    2.566885] thermal LNXTHERM:00: registered as thermal_zone0
[    2.566888] ACPI: Thermal Zone [TZ01] (27 C)
[    2.600169] hidraw: raw HID events driver (C) Jiri Kosina
[    2.622014] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.628749] cryptd: max_cpu_qlen set to 1000
[    2.636675] SCSI subsystem initialized
[    2.651098] ACPI: bus type USB registered
[    2.658063] usbcore: registered new interface driver usbfs
[    2.658598] usbcore: registered new interface driver hub
[    2.659295] usbcore: registered new device driver usb
[    2.676225] AVX2 version of gcm_enc/dec engaged.
[    2.676227] AES CTR mode by8 optimization enabled
[    2.676323] libata version 3.00 loaded.
[    2.685847] ahci 0000:00:17.0: version 3.0
[    2.718687] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.718797] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.718811] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.718853] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.718856] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    2.719485] scsi host0: ahci
[    2.719937] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    2.720187] scsi host1: ahci
[    2.720297] ata1: SATA max UDMA/133 abar m2048@0xb1135000 port 0xb1135100 irq 122
[    2.720300] ata2: SATA max UDMA/133 abar m2048@0xb1135000 port 0xb1135180 irq 122
[    2.746408] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.746918] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.746920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.746921] usb usb1: Product: xHCI Host Controller
[    2.746922] usb usb1: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd
[    2.746923] usb usb1: SerialNumber: 0000:00:14.0
[    2.767021] hub 1-0:1.0: USB hub found
[    2.767053] hub 1-0:1.0: 12 ports detected
[    2.839348] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    2.866199] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.866214] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.866225] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.866549] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    2.866556] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.866561] usb usb2: Product: xHCI Host Controller
[    2.866566] usb usb2: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd
[    2.866571] usb usb2: SerialNumber: 0000:00:14.0
[    2.867075] hub 2-0:1.0: USB hub found
[    2.867113] hub 2-0:1.0: 6 ports detected
[    2.867708] usb: port power management may be unreliable
[    3.030830] ata1: SATA link down (SStatus 4 SControl 300)
[    3.030905] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.033874] ata2.00: ATA-9: SAMSUNG MZNTY128HDHP-00000, MAT2100Q, max UDMA/133
[    3.033880] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.036361] ata2.00: configured for UDMA/133
[    3.038770] i2c_hid i2c-SYNA3105:00: i2c-SYNA3105:00 supply vdd not found, using dummy regulator
[    3.038814] i2c_hid i2c-SYNA3105:00: Linked as a consumer to regulator.0
[    3.038818] i2c_hid i2c-SYNA3105:00: i2c-SYNA3105:00 supply vddl not found, using dummy regulator
[    3.046548] ahci 0000:00:17.0: port does not support device sleep
[    3.047110] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNTY128 100Q PQ: 0 ANSI: 5
[    3.060742] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.060765] sd 1:0:0:0: [sda] Write Protect is off
[    3.060772] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.060801] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.063416]  sda: sda1 sda2 sda3 sda4 sda7
[    3.064570] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.198442] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    3.282978] input: SYNA3105:00 06CB:7EA5 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA3105:00/0018:06CB:7EA5.0001/input/input1
[    3.283269] hid-generic 0018:06CB:7EA5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3105:00 06CB:7EA5] on i2c-SYNA3105:00
[    3.348012] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    3.348018] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.478361] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    3.497974] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3242-001, fw id: 2361580
[    3.619378] input: Synaptics TM3242-001 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA3105:00/0018:06CB:7EA5.0001/input/input3
[    3.619611] hid-rmi 0018:06CB:7EA5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3105:00 06CB:7EA5] on i2c-SYNA3105:00
[    3.634384] usb 1-7: New USB device found, idVendor=04f2, idProduct=b59a, bcdDevice=34.04
[    3.634390] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.634393] usb 1-7: Product: XiaoMi USB 2.0 Webcam
[    3.634396] usb 1-7: Manufacturer: Chicony
[    3.706874] PM: Image not found (code -22)
[    3.916155] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.097465] systemd[1]: Inserted module 'autofs4'
[    4.118130] cgroup: cgroup2: unknown option "memory_recursiveprot"
[    4.192037] systemd[1]: systemd 247.2-5~bpo10+1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.211082] systemd[1]: Detected architecture x86-64.
[    4.219040] systemd[1]: Set hostname to <atzlinux>.
[    4.315879] systemd-sysv-generator[270]: SysV service '/etc/init.d/gdomap' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.316805] systemd-sysv-generator[270]: SysV service '/etc/init.d/gpm' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.330528] systemd-sysv-generator[270]: SysV service '/etc/init.d/acpi-support' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.333359] systemd-sysv-generator[270]: SysV service '/etc/init.d/hddtemp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.363051] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    4.438958] systemd[1]: Queued start job for default target Graphical Interface.
[    4.440962] systemd[1]: Created slice system-getty.slice.
[    4.441295] systemd[1]: Created slice system-modprobe.slice.
[    4.441618] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.441840] systemd[1]: Created slice User and Session Slice.
[    4.441956] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.442027] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.442430] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.442485] systemd[1]: Reached target Local Encrypted Volumes.
[    4.442522] systemd[1]: Reached target User and Group Name Lookups.
[    4.442538] systemd[1]: Reached target Remote File Systems.
[    4.442547] systemd[1]: Reached target Slices.
[    4.442762] systemd[1]: Listening on Syslog Socket.
[    4.442914] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.442987] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.443189] systemd[1]: Listening on Journal Audit Socket.
[    4.443321] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.443472] systemd[1]: Listening on Journal Socket.
[    4.443805] systemd[1]: Listening on udev Control Socket.
[    4.443932] systemd[1]: Listening on udev Kernel Socket.
[    4.444951] systemd[1]: Mounting Huge Pages File System...
[    4.446090] systemd[1]: Mounting POSIX Message Queue File System...
[    4.447772] systemd[1]: Mounting Kernel Debug File System...
[    4.449401] systemd[1]: Mounting Kernel Trace File System...
[    4.451045] systemd[1]: Starting Set the console keyboard layout...
[    4.452575] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.454693] systemd[1]: Starting Load Kernel Module configfs...
[    4.456251] systemd[1]: Starting Load Kernel Module drm...
[    4.457812] systemd[1]: Starting Load Kernel Module fuse...
[    4.458420] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.458505] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.461506] systemd[1]: Starting Journal Service...
[    4.467588] systemd[1]: Starting Load Kernel Modules...
[    4.468996] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.474584] systemd[1]: Starting Coldplug All udev Devices...
[    4.477518] fuse init (API version 7.27)
[    4.478677] systemd[1]: Mounted Huge Pages File System.
[    4.479067] systemd[1]: Mounted POSIX Message Queue File System.
[    4.479369] systemd[1]: Mounted Kernel Debug File System.
[    4.479672] systemd[1]: Mounted Kernel Trace File System.
[    4.486199] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.487055] systemd[1]: modprobe@configfs.service: Succeeded.
[    4.487442] systemd[1]: Finished Load Kernel Module configfs.
[    4.488413] systemd[1]: modprobe@fuse.service: Succeeded.
[    4.488705] systemd[1]: Finished Load Kernel Module fuse.
[    4.490470] systemd[1]: Mounting FUSE Control File System...
[    4.492145] systemd[1]: Mounting Kernel Configuration File System...
[    4.493029] systemd[1]: Finished Load Kernel Modules.
[    4.495093] systemd[1]: Starting Apply Kernel Variables...
[    4.500970] systemd[1]: Mounted FUSE Control File System.
[    4.503840] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    4.506192] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.508245] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.508329] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.510354] systemd[1]: Starting Load/Save Random Seed...
[    4.523092] systemd[1]: Starting Create System Users...
[    4.525451] systemd[1]: modprobe@drm.service: Succeeded.
[    4.525827] systemd[1]: Finished Load Kernel Module drm.
[    4.527420] systemd[1]: Mounted Kernel Configuration File System.
[    4.528088] systemd[1]: Finished Apply Kernel Variables.
[    4.538035] systemd[1]: Finished Load/Save Random Seed.
[    4.538440] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    4.556602] systemd[1]: Finished Create System Users.
[    4.558707] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.582373] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.585189] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.636677] systemd[1]: Finished Coldplug All udev Devices.
[    4.638186] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    4.644790] systemd[1]: Finished Set the console keyboard layout.
[    4.645078] systemd[1]: Reached target Local File Systems (Pre).
[    4.649475] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[    4.673216] systemd[1]: Started Journal Service.
[    5.087176] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0C:00/input/input4
[    5.102302] ACPI: Power Button [PWRB]
[    5.112788] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input5
[    5.126812] ACPI: Lid Switch [LID0]
[    5.141606] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.153716] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.166305] ACPI: Power Button [PWRF]
[    5.192784] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    5.374743] ACPI: AC Adapter [ADP0] (on-line)
[    5.379341] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[    5.379343] fb: switching to inteldrmfb from EFI VGA
[    5.379397] Console: switching to colour dummy device 80x25
[    5.394399] [drm] Replacing VGA console driver
[    5.400308] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.400310] [drm] Driver supports precise vblank timestamp query.
[    5.401103] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.404168] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_27.bin
[    5.404729] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    5.405306] acpi INT33D5:00: intel-hid: created platform device
[    5.425224] input: Intel HID events as /devices/pci0000:00/0000:00:1f.0/INT33D5:00/input/input7
[    5.456716] battery: ACPI: Battery Slot [BAT0] (battery present)
[    5.841956] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    5.877927] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    5.888344] iTCO_vendor_support: vendor-support=0
[    5.918151] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.919766] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    5.927768] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.955273] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.987367] Intel(R) Wireless WiFi driver for Linux
[    5.987369] Copyright(c) 2003- 2015 Intel Corporation
[    6.001386] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    6.003983] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.007851] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    6.007853] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.007854] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.007855] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.007855] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.007856] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    6.034678] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    6.035899] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.036145] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    6.046397] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-8000C-36.ucode
[    6.046419] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
[    6.046422] iwlwifi 0000:01:00.0: Found debug configuration: 0
[    6.047442] iwlwifi 0000:01:00.0: loaded firmware version 36.79ff3ccf.0 op_mode iwlmvm
[    6.175578] fbcon: inteldrmfb (fb0) is primary device
[    6.215221] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    6.223042] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    6.223482] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes (order 10) for firmware monitor.
[    6.290001] iwlwifi 0000:01:00.0: base HW address: a0:c5:89:47:0c:0c
[    6.443291] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.485541] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.485545] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.485548] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.485550] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.485552] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.485554] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    6.571268] thermal thermal_zone4: failed to read out thermal zone (-61)
[    6.805089] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    6.816510] Adding 1003516k swap on /dev/sda1.  Priority:-2 extents:1 across:1003516k SSFS
[    6.826998] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    6.847693] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    6.877212] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    6.879665] intel_rapl: Found RAPL domain package
[    6.879668] intel_rapl: Found RAPL domain core
[    6.879669] intel_rapl: Found RAPL domain uncore
[    6.879671] intel_rapl: Found RAPL domain dram
[    6.904055] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    6.932545] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    7.128687] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[    7.316611] Console: switching to colour frame buffer device 240x67
[    7.339174] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.391145] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    7.403365] media: Linux media interface: v0.10
[    7.453017] videodev: Linux video capture interface: v2.00
[    7.461230] Bluetooth: Core ver 2.22
[    7.461278] NET: Registered protocol family 31
[    7.461280] Bluetooth: HCI device and connection manager initialized
[    7.461285] Bluetooth: HCI socket layer initialized
[    7.461289] Bluetooth: L2CAP socket layer initialized
[    7.461310] Bluetooth: SCO socket layer initialized
[    7.586735] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    7.589178] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    7.613832] loop: module loaded
[    7.649655] uvcvideo: Found UVC 1.00 device XiaoMi USB 2.0 Webcam (04f2:b59a)
[    7.685158] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    7.686363] usbcore: registered new interface driver btusb
[    7.692150] Bluetooth: hci0: Device revision is 5
[    7.692152] Bluetooth: hci0: Secure boot is enabled
[    7.692153] Bluetooth: hci0: OTP lock is enabled
[    7.692154] Bluetooth: hci0: API lock is enabled
[    7.692155] Bluetooth: hci0: Debug lock is disabled
[    7.692156] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    7.694828] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[    7.694833] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    7.701515] ISO 9660 Extensions: Microsoft Joliet Level 3
[    7.701564] ISO 9660 Extensions: Microsoft Joliet Level 3
[    7.707788] input: XiaoMi USB 2.0 Webcam: XiaoMi U as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input16
[    7.714584] usbcore: registered new interface driver uvcvideo
[    7.714587] USB Video Class driver (1.1.1)
[    7.727016] ISO 9660 Extensions: RRIP_1991A
[    7.835216] audit: type=1400 audit(1612574818.903:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="firejail-default" pid=709 comm="apparmor_parser"
[    7.839411] audit: type=1400 audit(1612574818.907:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=711 comm="apparmor_parser"
[    7.839416] audit: type=1400 audit(1612574818.907:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=711 comm="apparmor_parser"
[    7.841360] audit: type=1400 audit(1612574818.907:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=710 comm="apparmor_parser"
[    7.841368] audit: type=1400 audit(1612574818.907:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=710 comm="apparmor_parser"
[    7.841373] audit: type=1400 audit(1612574818.907:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=710 comm="apparmor_parser"
[    7.842190] audit: type=1400 audit(1612574818.907:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=713 comm="apparmor_parser"
[    7.842769] audit: type=1400 audit(1612574818.911:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=708 comm="apparmor_parser"
[    7.842774] audit: type=1400 audit(1612574818.911:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=708 comm="apparmor_parser"
[    7.849376] audit: type=1400 audit(1612574818.915:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=714 comm="apparmor_parser"
[    8.363904] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.363907] Bluetooth: BNEP filters: protocol multicast
[    8.363912] Bluetooth: BNEP socket layer initialized
[    8.783511] broken atomic modeset userspace detected, disabling atomic
[    8.831972] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    8.840765] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    8.984898] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    9.064001] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[    9.075343] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    9.172571] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    9.248500] Bluetooth: hci0: Waiting for firmware download to complete
[    9.249105] Bluetooth: hci0: Firmware loaded in 1528288 usecs
[    9.249270] Bluetooth: hci0: Waiting for device to boot
[    9.260189] Bluetooth: hci0: Device booted in 10681 usecs
[    9.260606] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[    9.260610] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[    9.264453] Bluetooth: hci0: Applying Intel DDC parameters completed
[    9.319782] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[    9.398042] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[    9.411397] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    9.558377] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   10.704922] Bluetooth: RFCOMM TTY layer initialized
[   10.704930] Bluetooth: RFCOMM socket layer initialized
[   10.704939] Bluetooth: RFCOMM ver 1.11
[   13.011071] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   14.625274] wlp1s0: authenticate with 44:f9:71:69:42:20
[   14.634526] wlp1s0: send auth to 44:f9:71:69:42:20 (try 1/3)
[   14.656719] wlp1s0: authenticated
[   14.658496] wlp1s0: associate with 44:f9:71:69:42:20 (try 1/3)
[   14.666937] wlp1s0: RX AssocResp from 44:f9:71:69:42:20 (capab=0x1011 status=0 aid=2)
[   14.670355] wlp1s0: associated
[   14.910836] wlp1s0: Limiting TX power to 35 (35 - 0) dBm as advertised by 44:f9:71:69:42:20
[   14.943098] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  471.780033] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  471.780048] Bluetooth: HIDP socket layer initialized
[  471.782512] hid-generic 0005:046D:B010.0002: unknown main item tag 0x0
[  471.782812] input: Bluetooth Mouse M557 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B010.0002/input/input17
[  471.783163] input: Bluetooth Mouse M557 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B010.0002/input/input18
[  471.783356] input: Bluetooth Mouse M557 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B010.0002/input/input21
[  471.783792] hid-generic 0005:046D:B010.0002: input,hidraw1: BLUETOOTH HID v10.02 Mouse [Bluetooth Mouse M557] on a0:c5:89:47:0c:10

Reply to: