Bug#598144: rt2500pci: very low transfers and link quality
Jonathan Nieder wrote:
Thanks! I'm setting you as the new contact for this bug.
Okay, sounds good. I hope I can help solve this.
Can you try a 3.x.y kernel from squeeze-backports, sid, or
experimental? The only packages from outside squeeze that should be
needed for this test aside from the kernel itself are linux-base and
initramfs-tools.
If it works well, we can try to track down what change fixed it and
apply the same fix to squeeze. If it doesn't work well, we can try to
reproduce it without the nvidia driver and then get help from
upstream. So either result is a win.
I was already on it, :). I ran into a hiccup, but I've worked through it.
$ uname -a
Linux desmas-s 3.2.0-0.bpo.2-amd64 #1 SMP Fri Jun 29 20:42:29 UTC 2012
x86_64 GNU/Linux
Downloading the same ISO from the mirror gives 40 kb/s average, peaked
at 100kb/s once. The same ISO on the machine with the Atheros chip
gives over 1Mb/s still.
It looks like the problem is still prevalent. Where to now? Output
from dmesg is attached.
--
Nate
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-0.bpo.2-amd64 (Debian 3.2.20-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jun 29 20:42:29 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=f6b41718-95f9-4189-97e9-e85a5aeb99fc ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fea0000 (usable)
[ 0.000000] BIOS-e820: 000000007fea0000 - 000000007feb0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feb0000 - 000000007fee0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A785GM-LE, BIOS P1.20 04/22/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fea0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fea0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fea0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fea0000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 375d1000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb940 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007fea0000 00044 (v01 042210 RSDT1540 20100422 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007fea0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 000000007fea0450 091A9 (v01 AS267 AS267113 00000113 INTL 20051117)
[ 0.000000] ACPI: FACS 000000007feb0000 00040
[ 0.000000] ACPI: APIC 000000007fea0390 0007C (v01 042210 APIC1540 20100422 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007fea0410 0003C (v01 042210 OEMMCFG 20100422 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007feb0040 00072 (v01 042210 OEMB1540 20100422 MSFT 00000097)
[ 0.000000] ACPI: SRAT 000000007feaa450 000A0 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: AAFT 000000007feaa4f0 00027 (v01 042210 OEMAAFT 20100422 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007feaa520 00038 (v01 042210 OEMHPET 20100422 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007feaa560 002CC (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,7fea0000) -> [0,7fea0000)
[ 0.000000] Initmem setup node 0 0000000000000000-000000007fea0000
[ 0.000000] NODE_DATA [000000007fe9b000 - 000000007fe9ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fea0
[ 0.000000] On node 0 totalpages: 523823
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7108 pages used for memmap
[ 0.000000] DMA32 zone: 512732 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:80000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82304 r8192 d24192 u262144
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516654
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=f6b41718-95f9-4189-97e9-e85a5aeb99fc ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 60a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2047016k/2095744k available (3517k kernel code, 452k absent, 48276k reserved, 3216k data, 612k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2793.933 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.86 BogoMIPS (lpj=11175732)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004055] Security Framework initialized
[ 0.004060] AppArmor: AppArmor disabled by boot time parameter
[ 0.004222] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008515] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008998] Mount-cache hash table entries: 256
[ 0.009135] Initializing cgroup subsys cpuacct
[ 0.009140] Initializing cgroup subsys memory
[ 0.009154] Initializing cgroup subsys devices
[ 0.009156] Initializing cgroup subsys freezer
[ 0.009159] Initializing cgroup subsys net_cls
[ 0.009161] Initializing cgroup subsys blkio
[ 0.009170] Initializing cgroup subsys perf_event
[ 0.009200] tseg: 0000000000
[ 0.009211] CPU: Physical Processor ID: 0
[ 0.009212] CPU: Processor Core ID: 0
[ 0.009214] mce: CPU supports 5 MCE banks
[ 0.009224] using AMD E400 aware idle routine
[ 0.009899] ACPI: Core revision 20110623
[ 0.014333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054032] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ stepping 02
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 9a000
[ 0.140142] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.140160] System has AMD C1E enabled
[ 0.140165] Brought up 2 CPUs
[ 0.140167] Total of 2 processors activated (11175.51 BogoMIPS).
[ 0.140160] Switch to broadcast mode on CPU1
[ 0.140623] Switch to broadcast mode on CPU0
[ 0.140623] devtmpfs: initialized
[ 0.144021] PM: Registering ACPI NVS region at 7feb0000 (196608 bytes)
[ 0.144179] print_constraints: dummy:
[ 0.144240] NET: Registered protocol family 16
[ 0.144343] node 0 link 0: io port [1000, ffffff]
[ 0.144346] TOM: 0000000080000000 aka 2048M
[ 0.144349] node 0 link 0: mmio [a0000, bffff]
[ 0.144351] node 0 link 0: mmio [80000000, dfffffff]
[ 0.144354] node 0 link 0: mmio [e0000000, efffffff]
[ 0.144356] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.144358] bus: [00, 07] on node 0 link 0
[ 0.144361] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.144363] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.144365] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[ 0.144375] ACPI: bus type pci registered
[ 0.144447] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.144450] PCI: not using MMCONFIG
[ 0.144452] PCI: Using configuration type 1 for base access
[ 0.145048] bio: create slab <bio-0> at 0
[ 0.145048] ACPI: Added _OSI(Module Device)
[ 0.145048] ACPI: Added _OSI(Processor Device)
[ 0.145048] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.145048] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.145048] ACPI: EC: Look up EC in DSDT
[ 0.148705] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.153052] ACPI: Interpreter enabled
[ 0.153056] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.153081] ACPI: Using IOAPIC for interrupt routing
[ 0.153109] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.154255] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.174630] ACPI: No dock devices found.
[ 0.174632] HEST: Table not found.
[ 0.174636] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.174866] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.175069] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.175072] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.175074] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.175076] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.175079] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xdfffffff]
[ 0.175081] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.175098] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.175162] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.175200] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.175203] pci 0000:00:02.0: PME# disabled
[ 0.175222] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.175259] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.175262] pci 0000:00:05.0: PME# disabled
[ 0.175301] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.175321] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.175331] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.175341] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.175351] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.175362] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.175372] pci 0000:00:11.0: reg 24: [mem 0xf9fffc00-0xf9ffffff]
[ 0.175434] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.175448] pci 0000:00:12.0: reg 10: [mem 0xf9ffe000-0xf9ffefff]
[ 0.175518] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.175532] pci 0000:00:12.1: reg 10: [mem 0xf9ffd000-0xf9ffdfff]
[ 0.175608] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.175628] pci 0000:00:12.2: reg 10: [mem 0xf9fff800-0xf9fff8ff]
[ 0.175714] pci 0000:00:12.2: supports D1 D2
[ 0.175716] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.175720] pci 0000:00:12.2: PME# disabled
[ 0.175744] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.175758] pci 0000:00:13.0: reg 10: [mem 0xf9ffc000-0xf9ffcfff]
[ 0.175828] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.175842] pci 0000:00:13.1: reg 10: [mem 0xf9ff7000-0xf9ff7fff]
[ 0.175918] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.175938] pci 0000:00:13.2: reg 10: [mem 0xf9fff400-0xf9fff4ff]
[ 0.176037] pci 0000:00:13.2: supports D1 D2
[ 0.176039] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.176043] pci 0000:00:13.2: PME# disabled
[ 0.176071] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.176178] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.176195] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.176205] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.176215] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.176225] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.176235] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.176299] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.176321] pci 0000:00:14.2: reg 10: [mem 0xf9ff0000-0xf9ff3fff 64bit]
[ 0.176390] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.176394] pci 0000:00:14.2: PME# disabled
[ 0.176410] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.176492] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.176539] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.176553] pci 0000:00:14.5: reg 10: [mem 0xf9ff6000-0xf9ff6fff]
[ 0.176628] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.176646] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.176660] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.176675] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.176735] pci 0000:01:00.0: [10de:06e4] type 0 class 0x000300
[ 0.176745] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.176757] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.176768] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.176775] pci 0000:01:00.0: reg 24: [io 0xd800-0xd87f]
[ 0.176784] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.184024] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.184028] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.184031] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.184035] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.184080] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.184093] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.184115] pci 0000:02:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
[ 0.184130] pci 0000:02:00.0: reg 20: [mem 0xf8ff8000-0xf8ffbfff 64bit pref]
[ 0.184187] pci 0000:02:00.0: supports D1 D2
[ 0.184189] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184193] pci 0000:02:00.0: PME# disabled
[ 0.192021] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.192025] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.192030] pci 0000:00:05.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.192067] pci 0000:03:05.0: [1814:0201] type 0 class 0x000280
[ 0.192089] pci 0000:03:05.0: reg 10: [mem 0xfebfe000-0xfebfffff]
[ 0.192237] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.192244] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.192248] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.192251] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.192254] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.192256] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.192259] pci 0000:00:14.4: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode)
[ 0.192261] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.192275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.192562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.192605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.192669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.192877] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.193225] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.198483] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.198527] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.198569] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.198610] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.198651] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15)
[ 0.198691] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.198733] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.198774] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.198880] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.198880] vgaarb: loaded
[ 0.198880] vgaarb: bridge control possible 0000:01:00.0
[ 0.198880] PCI: Using ACPI for IRQ routing
[ 0.208235] PCI: pci_cache_line_size set to 64 bytes
[ 0.208316] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.208318] reserve RAM buffer: 000000007fea0000 - 000000007fffffff
[ 0.208448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.208452] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.210497] Switching to clocksource hpet
[ 0.210506] pnp: PnP ACPI init
[ 0.210506] ACPI: bus type pnp registered
[ 0.210506] pnp 00:00: [bus 00-ff]
[ 0.210506] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.210506] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.210506] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.210506] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.210506] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.210506] pnp 00:00: [mem 0x7ff00000-0xdfffffff window]
[ 0.210506] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.210506] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.210506] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.210506] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.210506] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210506] pnp 00:02: [dma 4]
[ 0.210506] pnp 00:02: [io 0x0000-0x000f]
[ 0.210506] pnp 00:02: [io 0x0081-0x0083]
[ 0.210506] pnp 00:02: [io 0x0087]
[ 0.210506] pnp 00:02: [io 0x0089-0x008b]
[ 0.210506] pnp 00:02: [io 0x008f]
[ 0.210506] pnp 00:02: [io 0x00c0-0x00df]
[ 0.210506] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.210506] pnp 00:03: [io 0x0070-0x0071]
[ 0.210511] pnp 00:03: [irq 8]
[ 0.210542] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.210551] pnp 00:04: [io 0x0061]
[ 0.210584] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.210593] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.210601] pnp 00:05: [irq 13]
[ 0.210631] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.210894] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.210929] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.211018] pnp 00:07: [io 0x0060]
[ 0.211020] pnp 00:07: [io 0x0064]
[ 0.211022] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.211024] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.211088] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.211091] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.211094] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211247] pnp 00:08: [io 0x0010-0x001f]
[ 0.211250] pnp 00:08: [io 0x0022-0x003f]
[ 0.211252] pnp 00:08: [io 0x0062-0x0063]
[ 0.211254] pnp 00:08: [io 0x0065-0x006f]
[ 0.211256] pnp 00:08: [io 0x0072-0x007f]
[ 0.211258] pnp 00:08: [io 0x0080]
[ 0.211260] pnp 00:08: [io 0x0084-0x0086]
[ 0.211262] pnp 00:08: [io 0x0088]
[ 0.211264] pnp 00:08: [io 0x008c-0x008e]
[ 0.211266] pnp 00:08: [io 0x0090-0x009f]
[ 0.211268] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.211270] pnp 00:08: [io 0x00b1]
[ 0.211271] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.211273] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.211275] pnp 00:08: [io 0x040b]
[ 0.211277] pnp 00:08: [io 0x04d6]
[ 0.211279] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.211281] pnp 00:08: [io 0x0c14]
[ 0.211283] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.211285] pnp 00:08: [io 0x0c52]
[ 0.211287] pnp 00:08: [io 0x0c6c]
[ 0.211288] pnp 00:08: [io 0x0c6f]
[ 0.211290] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.211292] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.211294] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.211296] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.211298] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.211300] pnp 00:08: [io 0x0800-0x089f]
[ 0.211302] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.211304] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.211306] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.211309] pnp 00:08: [io 0x0900-0x090f]
[ 0.211311] pnp 00:08: [io 0x0910-0x091f]
[ 0.211313] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.211315] pnp 00:08: [io 0x0060]
[ 0.211317] pnp 00:08: [io 0x0064]
[ 0.211319] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.211321] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.211404] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.211406] system 00:08: [io 0x040b] has been reserved
[ 0.211409] system 00:08: [io 0x04d6] has been reserved
[ 0.211411] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.211414] system 00:08: [io 0x0c14] has been reserved
[ 0.211416] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.211419] system 00:08: [io 0x0c52] has been reserved
[ 0.211421] system 00:08: [io 0x0c6c] has been reserved
[ 0.211424] system 00:08: [io 0x0c6f] has been reserved
[ 0.211427] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.211430] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.211432] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.211435] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.211437] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.211440] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.211442] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.211445] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.211448] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.211450] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.211453] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.211456] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.211459] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.211462] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211816] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.211819] pnp 00:09: [io 0x0280-0x028f]
[ 0.211821] pnp 00:09: [io 0x0290-0x029f]
[ 0.211872] system 00:09: [io 0x0280-0x028f] has been reserved
[ 0.211874] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.211877] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211912] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.211962] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.211964] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212127] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.212129] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.212131] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.212133] pnp 00:0b: [mem 0x00100000-0x7fefffff]
[ 0.212136] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.212194] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.212197] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.212199] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.212202] system 00:0b: [mem 0x00100000-0x7fefffff] could not be reserved
[ 0.212205] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.212208] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.212322] pnp: PnP ACPI: found 12 devices
[ 0.212324] ACPI: ACPI bus type pnp unregistered
[ 0.220049] PCI: max bus depth: 1 pci_try_num: 2
[ 0.220070] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.220073] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.220076] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.220080] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.220084] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.220086] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.220090] pci 0000:00:05.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.220095] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.220100] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.220124] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.220128] pci 0000:00:02.0: setting latency timer to 64
[ 0.220136] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.220139] pci 0000:00:05.0: setting latency timer to 64
[ 0.220146] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.220149] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.220151] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.220153] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.220155] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
[ 0.220157] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.220160] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.220162] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.220164] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.220167] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.220169] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.220171] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.220173] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.220175] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.220178] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.220180] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.220182] pci_bus 0000:03: resource 8 [mem 0x7ff00000-0xdfffffff]
[ 0.220184] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.220263] NET: Registered protocol family 2
[ 0.220392] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.221216] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.222768] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.223157] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.223160] TCP reno registered
[ 0.223170] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.223189] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.223332] NET: Registered protocol family 1
[ 0.223374] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.324103] pci 0000:00:12.0: PCI INT A disabled
[ 0.324111] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.404104] pci 0000:00:12.1: PCI INT A disabled
[ 0.404113] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.404127] pci 0000:00:12.2: PCI INT B disabled
[ 0.404134] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.484100] pci 0000:00:13.0: PCI INT A disabled
[ 0.484107] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.564100] pci 0000:00:13.1: PCI INT A disabled
[ 0.564112] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.564126] pci 0000:00:13.2: PCI INT B disabled
[ 0.564145] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.644101] pci 0000:00:14.5: PCI INT C disabled
[ 0.644123] pci 0000:01:00.0: Boot video device
[ 0.644130] PCI: CLS 64 bytes, default 64
[ 0.644189] Unpacking initramfs...
[ 0.879519] Freeing initrd memory: 10364k freed
[ 0.885766] audit: initializing netlink socket (disabled)
[ 0.885780] type=2000 audit(1344246324.880:1): initialized
[ 0.902694] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.917072] VFS: Disk quotas dquot_6.5.2
[ 0.917112] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.917187] msgmni has been set to 4018
[ 0.917386] alg: No test for stdrng (krng)
[ 0.917424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.917427] io scheduler noop registered
[ 0.917428] io scheduler deadline registered
[ 0.917446] io scheduler cfq registered (default)
[ 0.917581] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.917613] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.917715] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.917739] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.917834] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.917863] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.917865] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.918171] ERST: Table is not found!
[ 0.918173] GHES: HEST is not enabled!
[ 0.918241] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.952513] Linux agpgart interface v0.103
[ 0.952626] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.955328] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.955334] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.955486] mousedev: PS/2 mouse device common for all mice
[ 0.955534] rtc_cmos 00:03: RTC can wake from S4
[ 0.955657] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.955685] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.955696] cpuidle: using governor ladder
[ 0.955698] cpuidle: using governor menu
[ 0.955898] TCP cubic registered
[ 0.955951] NET: Registered protocol family 10
[ 0.956470] Mobile IPv6
[ 0.956472] NET: Registered protocol family 17
[ 0.956477] Registering the dns_resolver key type
[ 0.956649] PM: Hibernation image not present or could not be loaded.
[ 0.956660] registered taskstats version 1
[ 0.964085] rtc_cmos 00:03: setting system clock to 2012-08-06 09:45:25 UTC (1344246325)
[ 0.964122] Initializing network drop monitor service
[ 0.965317] Freeing unused kernel memory: 612k freed
[ 0.965559] Write protecting the kernel read-only data: 6144k
[ 0.967788] Freeing unused kernel memory: 560k freed
[ 0.970862] Freeing unused kernel memory: 720k freed
[ 0.986999] udev[74]: starting version 164
[ 1.044623] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.044648] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.044673] r8169 0000:02:00.0: setting latency timer to 64
[ 1.044718] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.045135] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000030e000, 00:25:22:e0:97:54, XID 081000c0 IRQ 42
[ 1.045139] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.051809] SCSI subsystem initialized
[ 1.060994] usbcore: registered new interface driver usbfs
[ 1.061019] usbcore: registered new interface driver hub
[ 1.065829] usbcore: registered new device driver usb
[ 1.066436] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.074424] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.074449] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.074481] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.074506] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.074534] ehci_hcd 0000:00:12.2: debug port 1
[ 1.074563] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9fff800
[ 1.079820] libata version 3.00 loaded.
[ 1.084120] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.084153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.084156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084158] usb usb1: Product: EHCI Host Controller
[ 1.084160] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[ 1.084162] usb usb1: SerialNumber: 0000:00:12.2
[ 1.084379] hub 1-0:1.0: USB hub found
[ 1.084384] hub 1-0:1.0: 6 ports detected
[ 1.084726] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.084750] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.084760] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.084771] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.084799] ehci_hcd 0000:00:13.2: debug port 1
[ 1.084826] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9fff400
[ 1.096099] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.096116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.096119] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.096121] usb usb2: Product: EHCI Host Controller
[ 1.096122] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[ 1.096124] usb usb2: SerialNumber: 0000:00:13.2
[ 1.096247] hub 2-0:1.0: USB hub found
[ 1.096250] hub 2-0:1.0: 6 ports detected
[ 1.096364] ahci 0000:00:11.0: version 3.0
[ 1.096390] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.096551] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.096554] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.096824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.097977] scsi0 : ahci
[ 1.098101] scsi1 : ahci
[ 1.098182] scsi2 : ahci
[ 1.098263] scsi3 : ahci
[ 1.098342] scsi4 : ahci
[ 1.098421] scsi5 : ahci
[ 1.098480] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 22
[ 1.098484] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 22
[ 1.098488] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 22
[ 1.098491] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 22
[ 1.098494] ata5: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9ffff00 irq 22
[ 1.098498] ata6: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9ffff80 irq 22
[ 1.098748] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.098790] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.099138] scsi6 : pata_atiixp
[ 1.099226] scsi7 : pata_atiixp
[ 1.099814] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.099816] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.100147] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.100173] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.100187] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.100222] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9ffe000
[ 1.160099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.160102] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.160104] usb usb3: Product: OHCI Host Controller
[ 1.160106] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.160107] usb usb3: SerialNumber: 0000:00:12.0
[ 1.160241] hub 3-0:1.0: USB hub found
[ 1.160248] hub 3-0:1.0: 3 ports detected
[ 1.160379] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.160394] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.160403] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.160421] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9ffd000
[ 1.220111] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.220114] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.220116] usb usb4: Product: OHCI Host Controller
[ 1.220118] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.220120] usb usb4: SerialNumber: 0000:00:12.1
[ 1.220261] hub 4-0:1.0: USB hub found
[ 1.220268] hub 4-0:1.0: 3 ports detected
[ 1.220408] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.220430] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.220440] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.220475] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9ffc000
[ 1.280089] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.280092] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280094] usb usb5: Product: OHCI Host Controller
[ 1.280096] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.280097] usb usb5: SerialNumber: 0000:00:13.0
[ 1.280208] hub 5-0:1.0: USB hub found
[ 1.280214] hub 5-0:1.0: 3 ports detected
[ 1.280315] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.280328] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.280336] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.280353] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9ff7000
[ 1.340110] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.340113] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.340115] usb usb6: Product: OHCI Host Controller
[ 1.340117] usb usb6: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.340119] usb usb6: SerialNumber: 0000:00:13.1
[ 1.340234] hub 6-0:1.0: USB hub found
[ 1.340240] hub 6-0:1.0: 3 ports detected
[ 1.340355] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.340370] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.340379] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.340398] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ff6000
[ 1.400102] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.400105] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.400107] usb usb7: Product: OHCI Host Controller
[ 1.400109] usb usb7: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.400111] usb usb7: SerialNumber: 0000:00:14.5
[ 1.400226] hub 7-0:1.0: USB hub found
[ 1.400232] hub 7-0:1.0: 2 ports detected
[ 1.420157] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.588106] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592108] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592135] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592159] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592186] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.594726] ata6.00: ATA-7: SAMSUNG HD753LJ, 1AA01107, max UDMA7
[ 1.594729] ata6.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.598776] ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01107, max UDMA7
[ 1.598779] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.598788] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01110, max UDMA7
[ 1.598791] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.598797] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01107, max UDMA7
[ 1.598800] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.598806] ata5.00: ATA-7: SAMSUNG HD753LJ, 1AA01107, max UDMA7
[ 1.598808] ata5.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.601480] ata6.00: configured for UDMA/133
[ 1.605619] ata2.00: configured for UDMA/133
[ 1.605630] ata5.00: configured for UDMA/133
[ 1.605639] ata4.00: configured for UDMA/133
[ 1.605647] ata1.00: configured for UDMA/133
[ 1.605815] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 1.606136] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.606338] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.606524] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.606746] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.613815] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.613856] sd 0:0:0:0: [sda] Write Protect is off
[ 1.613859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.613875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.614212] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.614247] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.614249] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.614265] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.614612] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.614646] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.614649] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.614664] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.614980] sd 4:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.615014] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.615016] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.615031] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.615349] sd 5:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.615383] sd 5:0:0:0: [sde] Write Protect is off
[ 1.615386] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.615402] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.619036] sdd: sdd1
[ 1.619286] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.620049] usb 5-1: new low-speed USB device number 2 using ohci_hcd
[ 1.621524] sde: sde1
[ 1.621812] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.623656] sdb: sdb1
[ 1.623829] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.625424] sdc: sdc1
[ 1.625611] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.653897] sda: sda1 sda3 < sda5 >
[ 1.654895] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.797234] usb 5-1: New USB device found, idVendor=413c, idProduct=2003
[ 1.797238] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.797240] usb 5-1: Product: Dell USB Keyboard
[ 1.797242] usb 5-1: Manufacturer: Dell
[ 1.810509] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input0
[ 1.810569] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-1/input0
[ 1.810589] usbcore: registered new interface driver usbhid
[ 1.810591] usbhid: USB HID core driver
[ 1.859059] async_tx: api initialized (async)
[ 1.859403] xor: automatically using best checksumming function: generic_sse
[ 1.876015] generic_sse: 8559.000 MB/sec
[ 1.876017] xor: using function: generic_sse (8559.000 MB/sec)
[ 1.944024] raid6: int64x1 2535 MB/s
[ 2.012029] raid6: int64x2 2629 MB/s
[ 2.080044] raid6: int64x4 2074 MB/s
[ 2.148020] raid6: int64x8 1586 MB/s
[ 2.216019] raid6: sse2x1 3562 MB/s
[ 2.284017] raid6: sse2x2 4859 MB/s
[ 2.352017] raid6: sse2x4 5256 MB/s
[ 2.352018] raid6: using algorithm sse2x4 (5256 MB/s)
[ 2.354180] md: raid6 personality registered for level 6
[ 2.354183] md: raid5 personality registered for level 5
[ 2.354184] md: raid4 personality registered for level 4
[ 2.357821] mdadm: sending ioctl 1261 to a partition!
[ 2.357824] mdadm: sending ioctl 1261 to a partition!
[ 2.358118] mdadm: sending ioctl 1261 to a partition!
[ 2.358122] mdadm: sending ioctl 1261 to a partition!
[ 2.358313] mdadm: sending ioctl 1261 to a partition!
[ 2.358315] mdadm: sending ioctl 1261 to a partition!
[ 2.358474] mdadm: sending ioctl 1261 to a partition!
[ 2.358476] mdadm: sending ioctl 1261 to a partition!
[ 2.358641] mdadm: sending ioctl 800c0910 to a partition!
[ 2.358643] mdadm: sending ioctl 800c0910 to a partition!
[ 2.380362] md: md0 stopped.
[ 2.384183] md: bind<sdd1>
[ 2.384320] md: bind<sdc1>
[ 2.384524] md: bind<sdb1>
[ 2.385093] md: bind<sde1>
[ 2.386480] bio: create slab <bio-1> at 1
[ 2.386496] md/raid:md0: device sde1 operational as raid disk 0
[ 2.386498] md/raid:md0: device sdb1 operational as raid disk 3
[ 2.386500] md/raid:md0: device sdc1 operational as raid disk 2
[ 2.386503] md/raid:md0: device sdd1 operational as raid disk 1
[ 2.386925] md/raid:md0: allocated 4280kB
[ 2.386973] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 2.386976] RAID conf printout:
[ 2.386978] --- level:5 rd:4 wd:4
[ 2.386980] disk 0, o:1, dev:sde1
[ 2.386982] disk 1, o:1, dev:sdd1
[ 2.386984] disk 2, o:1, dev:sdc1
[ 2.386985] disk 3, o:1, dev:sdb1
[ 2.387019] md0: detected capacity change from 0 to 2250460889088
[ 2.390487] md0: unknown partition table
[ 2.549527] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.408177] udev[510]: starting version 164
[ 4.863933] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.863939] ACPI: Power Button [PWRB]
[ 4.863999] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.864018] ACPI: Power Button [PWRF]
[ 4.893108] ACPI: processor limited to max C-state 1
[ 4.935026] wmi: Mapper loaded
[ 4.988467] udev[528]: renamed network interface eth0 to eth1
[ 5.131682] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.155367] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.176984] MCE: In-kernel MCE decoding enabled.
[ 5.337694] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 5.337697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.356570] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.356657] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 5.379662] EDAC MC: Ver: 2.1.0
[ 5.394503] AMD64 EDAC driver v3.4.0
[ 5.394581] EDAC amd64: DRAM ECC disabled.
[ 5.394589] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.394590] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.394592] (Note that use of the override may cause unknown side effects.)
[ 5.540344] cfg80211: Calling CRDA to update world regulatory domain
[ 5.590212] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.904242] rt2500pci 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.010291] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.010796] Registered led device: rt2500pci-phy0::radio
[ 6.010818] Registered led device: rt2500pci-phy0::quality
[ 7.284114] Adding 2072348k swap on /dev/sda5. Priority:-1 extents:1 across:2072348k
[ 7.288110] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.423039] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.561395] scsi_verify_blk_ioctl: 94 callbacks suppressed
[ 7.561398] mdadm: sending ioctl 800c0910 to a partition!
[ 7.561401] mdadm: sending ioctl 800c0910 to a partition!
[ 7.561523] mdadm: sending ioctl 800c0910 to a partition!
[ 7.561525] mdadm: sending ioctl 800c0910 to a partition!
[ 7.565599] mdadm: sending ioctl 1261 to a partition!
[ 7.565603] mdadm: sending ioctl 1261 to a partition!
[ 7.725062] EXT4-fs (md0): warning: maximal mount count reached, running e2fsck is recommended
[ 7.764635] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.596930] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 71.412307] fuse init (API version 7.17)
[ 73.341391] r8169 0000:02:00.0: eth1: link down
[ 73.341712] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 76.780892] Bluetooth: Core ver 2.16
[ 76.780913] NET: Registered protocol family 31
[ 76.780915] Bluetooth: HCI device and connection manager initialized
[ 76.780919] Bluetooth: HCI socket layer initialized
[ 76.780921] Bluetooth: L2CAP socket layer initialized
[ 76.781032] Bluetooth: SCO socket layer initialized
[ 76.808488] Bluetooth: RFCOMM TTY layer initialized
[ 76.808497] Bluetooth: RFCOMM socket layer initialized
[ 76.808498] Bluetooth: RFCOMM ver 1.11
[ 76.844306] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 76.844309] Bluetooth: BNEP filters: protocol multicast
[ 76.914303] Bridge firewalling registered
[ 77.224666] mtrr: base(0xfb000000) is not aligned on a size(0xe00000) boundary
[ 77.400784] lp: driver loaded but no devices found
[ 77.403865] ppdev: user-space parallel port driver
[ 81.536210] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ (2 cpu cores) (version 2.20.00)
[ 81.536265] powernow-k8: fid 0x14 (2800 MHz), vid 0xa
[ 81.536267] powernow-k8: fid 0x12 (2600 MHz), vid 0xc
[ 81.536269] powernow-k8: fid 0x10 (2400 MHz), vid 0xe
[ 81.536270] powernow-k8: fid 0xe (2200 MHz), vid 0x10
[ 81.536272] powernow-k8: fid 0xc (2000 MHz), vid 0x10
[ 81.536274] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 81.536275] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 85.034030] wlan0: authenticate with 00:21:29:68:78:c6 (try 1)
[ 85.035508] wlan0: authenticated
[ 85.035593] wlan0: associate with 00:21:29:68:78:c6 (try 1)
[ 85.037852] wlan0: RX AssocResp from 00:21:29:68:78:c6 (capab=0x431 status=0 aid=1)
[ 85.037859] wlan0: associated
[ 85.038975] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 85.619269] Intel AES-NI instructions are not detected.
[ 86.669493] sshd (2044): /proc/2044/oom_adj is deprecated, please use /proc/2044/oom_score_adj instead.
[ 95.152147] wlan0: no IPv6 routers present
[ 123.520507] wlan0: deauthenticating from 00:21:29:68:78:c6 by local choice (reason=3)
[ 123.556572] cfg80211: Calling CRDA to update world regulatory domain
[ 139.124092] r8169 0000:02:00.0: eth1: link down
[ 139.124875] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 139.141418] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 141.469406] wlan0: authenticate with 00:21:29:68:78:c6 (try 1)
[ 141.473659] wlan0: authenticated
[ 141.474424] wlan0: associate with 00:21:29:68:78:c6 (try 1)
[ 141.488439] wlan0: RX AssocResp from 00:21:29:68:78:c6 (capab=0x431 status=0 aid=1)
[ 141.488447] wlan0: associated
[ 141.489540] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 152.032142] wlan0: no IPv6 routers present
Reply to: