Bug#598144: very low transfers and link quality
Package: linux-2.6
Version: 2.6.32-45
Severity: normal
I am receiving a similar issue as the bug reporter. As can be seen
below, my kernel log is spammed with the same error. Using the Debian
Squeeze ISO as a baseline, the machine tops out downloading the ISO at
around 80 kb/s. Another machine on the same access point via an Atheros
card dowloads from the same mirror at over 1 Mb/s.
As can be seen in the kernel log below, the logged message can be
stopped; I did so by issuing the command:
# iwconfig wlan0 power off
However, I still receive poor throughput.
I can reproduce these issues, and would like to help with the ticket.
--
Nate
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=f6b41718-95f9-4189-97e9-e85a5aeb99fc ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 808.608158] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 808.888155] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 809.764160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 810.012487] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 810.800159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 812.552161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 812.852161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 813.736161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 814.436151] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 814.900162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 815.984492] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 816.324491] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 817.868160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 818.688162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 821.244152] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 826.016161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 826.348169] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 827.020161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 827.216153] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 828.816173] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 829.060146] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 829.776158] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 829.980490] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 830.208159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 830.872160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 831.484159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 834.048151] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 834.780162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 835.712152] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 835.920154] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 839.468158] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 839.708147] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 840.808484] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 844.000150] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 844.216159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 849.144160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 850.228159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 850.944159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 851.176143] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 855.128151] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 855.780159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 855.992154] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 856.724159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 856.912155] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 858.756160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 860.264160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 861.172160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 861.416159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 861.896159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 862.472160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 862.812164] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 866.072165] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 866.356162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 867.104162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 868.148160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 868.380150] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 869.172150] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 869.404160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 870.400160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 871.844162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 874.088162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 874.448505] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 875.228149] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 875.884148] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 876.224139] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 876.432152] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 877.436145] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 880.672152] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 881.852139] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 882.104135] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 882.880148] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 883.876148] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 885.656161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 886.476153] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 887.104152] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 888.216152] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 888.668153] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 888.864144] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 895.676160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 895.928159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 898.104160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 898.436160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 900.744161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 900.944160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 902.452162] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 904.448159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 904.632159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 905.112161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 905.420160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 905.928161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 908.324161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 908.812175] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 909.120160] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 909.864161] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 910.060158] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 910.908159] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 911.504174] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 911.704158] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).
[ 2065.202273] JBD: barrier-based sync failed on md0-8 - disabling barriers
[ 2946.873251] reportbug[4124] trap divide error ip:7f5e8e7aecf0 sp:7f5e884b6a60 error:0 in libgtk-x11-2.0.so.0.2000.1[7f5e8e682000+415000]
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: P1.20
board_vendor: ASRock
board_name: A785GM-LE
board_version:
** Loaded modules:
Module Size Used by
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7225 2
bridge 39646 0
stp 1440 1 bridge
bnep 9427 2
powernow_k8 10978 1
rfcomm 29629 0
l2cap 24752 6 bnep,rfcomm
cpufreq_stats 2740 0
cpufreq_userspace 1992 0
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
aes_x86_64 7340 3
aes_generic 25714 1 aes_x86_64
binfmt_misc 6431 1
fuse 50924 1
snd_hda_codec_realtek 235714 1
arc4 1274 2
snd_hda_intel 20035 0
ecb 1841 2
rt2500pci 12959 0
snd_hda_codec 54292 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
rt2x00pci 4605 1 rt2500pci
rt2x00lib 21810 2 rt2500pci,rt2x00pci
led_class 2433 1 rt2x00lib
snd_pcm 60487 2 snd_hda_intel,snd_hda_codec
mac80211 137372 2 rt2x00pci,rt2x00lib
snd_seq 42881 0
snd_timer 15598 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
cfg80211 101496 2 rt2x00lib,mac80211
snd 46526 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rfkill 13044 3 bluetooth,cfg80211
i2c_piix4 8328 0
nvidia 11475905 24
edac_core 29261 0
soundcore 4598 1 snd
psmouse 49985 0
eeprom_93cx6 1335 1 rt2500pci
k8temp 3283 0
i2c_core 15819 2 i2c_piix4,nvidia
edac_mce_amd 6433 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
serio_raw 3752 0
pcspkr 1699 0
wmi 4323 0
evdev 7352 4
processor 29935 1 powernow_k8
button 4650 0
ext4 288382 2
mbcache 5050 1 ext4
jbd2 67111 1 ext4
crc16 1319 2 l2cap,ext4
raid456 44516 1
md_mod 73920 2 raid456
async_raid6_recov 5170 1 raid456
async_pq 3479 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2478 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1198 2 raid456,async_raid6_recov
async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
usbhid 33292 0
hid 63257 1 usbhid
sd_mod 29937 11
crc_t10dif 1276 1 sd_mod
thermal 11674 0
ata_generic 3239 0
r8169 36840 0
ohci_hcd 19343 0
mii 3210 1 r8169
ahci 32870 6
thermal_sys 11942 2 processor,thermal
ehci_hcd 32097 0
pata_atiixp 3489 0
libata 133776 3 ata_generic,ahci,pata_atiixp
usbcore 123122 4 usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
scsi_mod 126725 2 sd_mod,libata
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:25:22:e0:97:54 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:14:85:b6:60:6e brd ff:ff:ff:ff:ff:ff
inet 192.168.1.20/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::214:85ff:feb6:606e/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether e2:99:6b:18:b0:e6 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 424006 3104 0 0 0 0 0 0 424006 3104 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0:55269139 64403 0 0 0 0 0 0 7525012 57294 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
67386 total packets received
31 with invalid addresses
0 forwarded
0 incoming packets discarded
66479 incoming packets delivered
60297 requests sent out
64 dropped because of missing route
Icmp:
481 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 481
481 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 481
IcmpMsg:
InType8: 481
OutType0: 481
Tcp:
1473 active connections openings
43 passive connection openings
0 failed connection attempts
1 connection resets received
7 connections established
62536 segments received
56252 segments send out
172 segments retransmited
0 bad segments received.
4429 resets sent
Udp:
3559 packets received
0 packets to unknown port received.
0 packet receive errors
3427 packets sent
UdpLite:
TcpExt:
3 packets pruned from receive queue because of socket buffer overrun
27 TCP sockets finished time wait in fast timer
6 packets rejects in established connections because of timestamp
2644 delayed acks sent
2 delayed acks further delayed because of locked socket
Quick ack mode was activated 83 times
19 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
29102 packet headers predicted
2256 acknowledgments not containing data payload received
7266 predicted acknowledgments
6 times recovered from packet loss by selective acknowledgements
95 congestion windows recovered without slow start after partial ack
3 TCP data loss events
3 timeouts after SACK recovery
6 fast retransmits
154 other TCP timeouts
835 packets collapsed in receive queue due to low socket buffer
83 DSACKs sent for old packets
1 DSACKs sent for out of order packets
126 DSACKs received
428 connections reset due to unexpected data
999 connections reset due to early user close
4 connections aborted due to timeout
TCPDSACKIgnoredOld: 45
TCPDSACKIgnoredNoUndo: 37
TCPSackShiftFallback: 36
IpExt:
InMcastPkts: 70
OutMcastPkts: 23
InBcastPkts: 104
OutBcastPkts: 100
InOctets: 54792994
OutOctets: 6105935
InMcastOctets: 14855
OutMcastOctets: 5268
InBcastOctets: 15708
OutBcastOctets: 14390
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Subsystem: ASRock Incorporation Device [1849:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device [1849:4391]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9ff7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f9fff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: ASRock Incorporation Device [1849:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device [1849:439c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASRock Incorporation Device [1849:3662]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at f9ff0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: ASRock Incorporation Device [1849:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4399]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9ff6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at d800 [size=128]
[virtual] Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at f8fff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f8ff8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:05.0 Network controller [0280]: RaLink RT2500 802.11g [1814:0201] (rev 01)
Subsystem: Giga-byte Technology Device [1458:e932]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: rt2500pci
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-45 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
Reply to: