Dear Jonathan, Am Sonntag, den 15.01.2012, 01:26 +0100 schrieb Paul Menzel: > Am Samstag, den 14.01.2012, 18:17 -0600 schrieb Jonathan Nieder: > > > Paul Menzel wrote: > > > > > with my ASUS M2A-VM [1] system suspend and resume does not work. The > > > system suspends fine but pressing the power button afterward the fans > > > start turning and the CD drives make noises but the screen does not > > > receive any signal and the system even cannot be pinged from another > > > system. Therefore I am left to cold reset(?) the system and even > > > netconsole does not print anything when resuming the system. > > > > > > The strange thing is, using the Debian based live system Grml 2011.12 > > > [2] suspend and resume works fine. The difference is that Grml loads the > > > Radeon graphics firmware(?) and I do not have `linux-firmware-nonfree` > > > installed. > > > > Yep, that's believable. with `firmware-linux-nonfree` installed suspend and resume works just fine. > I imagine when booting in recovery mode with radeon.modeset=0 on the > command line, suspend and resume works fine? > > I will try that too. … tomorrow. I hope I can leave `firmware-linux-nonfree` installed when testing that. > > Please provide full "dmesg" output from booting up the affected system. > > Please find it attached. Please find the full output of `dmesg` with `firmware-linux-nonfree` installed attached. Thanks, Paul
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 06:25:07 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/speicher-root ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ee0000 (usable) [ 0.000000] BIOS-e820: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ee3000 - 0000000077ef0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077f00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/M2A-VM, BIOS ASUS M2A-VM ACPI BIOS Revision 1604 12/19/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x77ee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 base 0077F00000 mask FFFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f6560] f6560 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000077ee0000 [ 0.000000] 0000000000 - 0077e00000 page 2M [ 0.000000] 0077e00000 - 0077ee0000 page 4k [ 0.000000] kernel direct mapping tables up to 77ee0000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 3694c000 - 3749e000 [ 0.000000] ACPI: RSDP 00000000000f8210 00024 (v02 ATI ) [ 0.000000] ACPI: XSDT 0000000077ee3100 0004C (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0000000077ee8440 000F4 (v03 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0000000077ee3280 0515D (v01 ATI ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000077ee0000 00040 [ 0.000000] ACPI: SSDT 0000000077ee8680 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0000000077ee8900 00038 (v01 ATI ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0000000077ee8980 0003C (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0000000077ee8580 00084 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077ee0000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000077ee0000 [ 0.000000] NODE_DATA [0000000077edb000 - 0000000077edffff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075800000-ffff8800773fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077ee0 [ 0.000000] On node 0 totalpages: 491119 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6661 pages used for memmap [ 0.000000] DMA32 zone: 480475 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8200 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 77f00000 (gap: 77f00000:68100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880077c00000 s80768 r8192 d21632 u524288 [ 0.000000] pcpu-alloc: s80768 r8192 d21632 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 484397 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/speicher-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 29fe000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1915288k/1964928k available (3275k kernel code, 452k absent, 49188k reserved, 3444k data, 556k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2099.957 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.91 BogoMIPS (lpj=8399828) [ 0.008013] pid_max: default: 32768 minimum: 301 [ 0.008079] Security Framework initialized [ 0.008312] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012137] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.012771] Mount-cache hash table entries: 256 [ 0.012954] Initializing cgroup subsys cpuacct [ 0.012960] Initializing cgroup subsys memory [ 0.012979] Initializing cgroup subsys devices [ 0.012983] Initializing cgroup subsys freezer [ 0.012986] Initializing cgroup subsys net_cls [ 0.012989] Initializing cgroup subsys blkio [ 0.013036] tseg: 0077f00000 [ 0.013038] CPU: Physical Processor ID: 0 [ 0.013041] CPU: Processor Core ID: 0 [ 0.013043] mce: CPU supports 5 MCE banks [ 0.013056] using AMD E400 aware idle routine [ 0.013395] ACPI: Core revision 20110623 [ 0.024301] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063995] CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02 [ 0.068003] Performance Events: AMD PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 48 [ 0.068003] ... generic registers: 4 [ 0.068003] ... value mask: 0000ffffffffffff [ 0.068003] ... max period: 00007fffffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000000000f [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] Booting Node 0, Processors #1 [ 0.068003] smpboot cpu 1: start_ip = 9a000 [ 0.152070] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152099] Brought up 2 CPUs [ 0.152103] Total of 2 processors activated (8399.71 BogoMIPS). [ 0.152624] devtmpfs: initialized [ 0.156176] PM: Registering ACPI NVS region at 77ee0000 (12288 bytes) [ 0.156212] print_constraints: dummy: [ 0.156295] NET: Registered protocol family 16 [ 0.156426] node 0 link 0: io port [b000, ffff] [ 0.156430] TOM: 0000000080000000 aka 2048M [ 0.156433] node 0 link 0: mmio [a0000, bffff] [ 0.156437] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.156440] node 0 link 0: mmio [80000000, dfffffff] [ 0.156444] node 0 link 0: mmio [f8000000, fe02ffff] [ 0.156447] node 0 link 0: mmio [e0000000, e03fffff] [ 0.156451] bus: [00, 03] on node 0 link 0 [ 0.156454] bus: 00 index 0 [io 0x0000-0xffff] [ 0.156457] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.156460] bus: 00 index 2 [mem 0xe0400000-0xfcffffffff] [ 0.156463] bus: 00 index 3 [mem 0x80000000-0xe03fffff] [ 0.156475] ACPI: bus type pci registered [ 0.156557] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.156561] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.175898] PCI: Using configuration type 1 for base access [ 0.176533] bio: create slab <bio-0> at 0 [ 0.176533] ACPI: Added _OSI(Module Device) [ 0.176533] ACPI: Added _OSI(Processor Device) [ 0.176533] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.176533] ACPI: Added _OSI(Processor Aggregator Device) [ 0.176740] ACPI: EC: Look up EC in DSDT [ 0.183420] ACPI: Interpreter enabled [ 0.183425] ACPI: (supports S0 S1 S3 S4 S5) [ 0.183454] ACPI: Using IOAPIC for interrupt routing [ 0.188693] ACPI: No dock devices found. [ 0.188696] HEST: Table not found. [ 0.188701] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.188788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.188970] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.188973] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.188977] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.188980] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.188984] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 0.188997] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.189034] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.189081] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604 [ 0.189112] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.189116] pci 0000:00:07.0: PME# disabled [ 0.189156] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.189177] pci 0000:00:12.0: reg 10: [io 0xfc00-0xfc07] [ 0.189189] pci 0000:00:12.0: reg 14: [io 0xf800-0xf803] [ 0.189200] pci 0000:00:12.0: reg 18: [io 0xf400-0xf407] [ 0.189212] pci 0000:00:12.0: reg 1c: [io 0xf000-0xf003] [ 0.189224] pci 0000:00:12.0: reg 20: [io 0xec00-0xec0f] [ 0.189236] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.189260] pci 0000:00:12.0: set SATA to AHCI mode [ 0.189296] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.189312] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.189389] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.189406] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.189483] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.189499] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.189576] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.189592] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.189669] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.189685] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.189768] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.189791] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.189872] pci 0000:00:13.5: supports D1 D2 [ 0.189875] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.189880] pci 0000:00:13.5: PME# disabled [ 0.189998] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.190378] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.192771] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.192787] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.192799] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.192811] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.192822] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.192834] pci 0000:00:14.1: reg 20: [io 0xe400-0xe40f] [ 0.192880] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.192906] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.192973] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.192978] pci 0000:00:14.2: PME# disabled [ 0.192997] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.193084] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.193140] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.193168] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.193191] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.193215] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.193247] PCI: peer root bus 00 res updated from pci conf [ 0.193281] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300 [ 0.193294] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.193302] pci 0000:01:05.0: reg 18: [mem 0xfdbf0000-0xfdbfffff 64bit] [ 0.193308] pci 0000:01:05.0: reg 20: [io 0xcc00-0xccff] [ 0.193314] pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff] [ 0.193329] pci 0000:01:05.0: supports D1 D2 [ 0.193347] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.193352] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.193356] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.193360] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.193415] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.193431] pci 0000:02:00.0: reg 10: [io 0xdc00-0xdcff] [ 0.193458] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit] [ 0.193490] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.193531] pci 0000:02:00.0: supports D1 D2 [ 0.193533] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.193538] pci 0000:02:00.0: PME# disabled [ 0.193558] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.193569] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.193574] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.193577] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.193582] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.193651] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.193657] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.193662] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.193668] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.193671] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.193674] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.193678] pci 0000:00:14.4: bridge window [mem 0xe0400000-0xfcffffffff] (subtractive decode) [ 0.193681] pci 0000:00:14.4: bridge window [mem 0x80000000-0xe03fffff] (subtractive decode) [ 0.193697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.193995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.194114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.194164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.194221] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.194226] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.194228] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.215448] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215568] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215627] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215686] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215805] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [ 0.215863] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.216045] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.216049] vgaarb: loaded [ 0.216050] vgaarb: bridge control possible 0000:01:05.0 [ 0.216106] PCI: Using ACPI for IRQ routing [ 0.226272] PCI: pci_cache_line_size set to 64 bytes [ 0.226538] Expanded resource reserved due to conflict with PCI Bus #00 [ 0.226541] Expanded resource reserved due to conflict with PCI Bus #00 [ 0.226544] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.226548] reserve RAM buffer: 0000000077ee0000 - 0000000077ffffff [ 0.226700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.226706] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.228064] Switching to clocksource hpet [ 0.230470] pnp: PnP ACPI init [ 0.230492] ACPI: bus type pnp registered [ 0.230661] pnp 00:00: [bus 00-ff] [ 0.230664] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.230667] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.230670] pnp 00:00: [io 0x0d00-0xffff window] [ 0.230674] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.230677] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.230680] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.230752] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.230856] pnp 00:01: [io 0x4100-0x411f] [ 0.230860] pnp 00:01: [io 0x0228-0x022f] [ 0.230863] pnp 00:01: [io 0x040b] [ 0.230865] pnp 00:01: [io 0x04d6] [ 0.230868] pnp 00:01: [io 0x0c00-0x0c01] [ 0.230870] pnp 00:01: [io 0x0c14] [ 0.230873] pnp 00:01: [io 0x0c50-0x0c52] [ 0.230876] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.230878] pnp 00:01: [io 0x0c6f] [ 0.230881] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.230884] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.230886] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.230889] pnp 00:01: [io 0x4000-0x40fe] [ 0.230892] pnp 00:01: [io 0x4210-0x4217] [ 0.230895] pnp 00:01: [io 0x0b00-0x0b0f] [ 0.230897] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.230900] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.230904] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.230961] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.231004] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.231008] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.231011] system 00:01: [io 0x040b] has been reserved [ 0.231015] system 00:01: [io 0x04d6] has been reserved [ 0.231018] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.231021] system 00:01: [io 0x0c14] has been reserved [ 0.231025] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.231028] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.231031] system 00:01: [io 0x0c6f] has been reserved [ 0.231035] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.231038] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.231041] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.231045] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.231048] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.231052] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.231056] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.231061] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.231065] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.231209] pnp 00:02: [dma 4] [ 0.231211] pnp 00:02: [io 0x0000-0x000f] [ 0.231214] pnp 00:02: [io 0x0080-0x0090] [ 0.231217] pnp 00:02: [io 0x0094-0x009f] [ 0.231221] pnp 00:02: [io 0x00c0-0x00df] [ 0.231259] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.231263] Switched to NOHz mode on CPU #0 [ 0.231302] Switched to NOHz mode on CPU #1 [ 0.231305] pnp 00:03: [irq 0 disabled] [ 0.231324] pnp 00:03: [irq 8] [ 0.231327] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.231367] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.231400] pnp 00:04: [io 0x0070-0x0073] [ 0.231440] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.231453] pnp 00:05: [io 0x0061] [ 0.231488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.231503] pnp 00:06: [io 0x00f0-0x00ff] [ 0.231514] pnp 00:06: [irq 13] [ 0.231553] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.231609] pnp 00:07: [io 0x0010-0x001f] [ 0.231612] pnp 00:07: [io 0x0022-0x003f] [ 0.231615] pnp 00:07: [io 0x0044-0x005f] [ 0.231618] pnp 00:07: [io 0x0062-0x0063] [ 0.231620] pnp 00:07: [io 0x0065-0x006f] [ 0.231623] pnp 00:07: [io 0x0074-0x007f] [ 0.231626] pnp 00:07: [io 0x0091-0x0093] [ 0.231629] pnp 00:07: [io 0x00a2-0x00bf] [ 0.231631] pnp 00:07: [io 0x00e0-0x00ef] [ 0.231634] pnp 00:07: [io 0x04d0-0x04d1] [ 0.231637] pnp 00:07: [io 0x0220-0x0225] [ 0.231714] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.231717] system 00:07: [io 0x0220-0x0225] has been reserved [ 0.231721] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.232073] pnp 00:08: [io 0x03f8-0x03ff] [ 0.232084] pnp 00:08: [irq 4] [ 0.232167] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.232540] pnp 00:09: [io 0x0378-0x037f] [ 0.232551] pnp 00:09: [irq 7] [ 0.232618] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.232766] pnp 00:0a: [io 0x0060] [ 0.232769] pnp 00:0a: [io 0x0064] [ 0.232779] pnp 00:0a: [irq 12] [ 0.232828] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.232912] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.232976] system 00:0b: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.232980] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233205] pnp 00:0c: [mem 0x000cd600-0x000cffff] [ 0.233208] pnp 00:0c: [mem 0x000f0000-0x000f7fff] [ 0.233211] pnp 00:0c: [mem 0x000f8000-0x000fbfff] [ 0.233214] pnp 00:0c: [mem 0x000fc000-0x000fffff] [ 0.233217] pnp 00:0c: [mem 0x77ef0000-0x77feffff] [ 0.233220] pnp 00:0c: [mem 0xfed00000-0xfed000ff] [ 0.233223] pnp 00:0c: [mem 0x77ee0000-0x77efffff] [ 0.233226] pnp 00:0c: [mem 0xffff0000-0xffffffff] [ 0.233229] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.233232] pnp 00:0c: [mem 0x00100000-0x77edffff] [ 0.233235] pnp 00:0c: [mem 0x77ff0000-0x7ffeffff] [ 0.233238] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.233241] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.233244] pnp 00:0c: [mem 0xfff80000-0xfffeffff] [ 0.233321] system 00:0c: [mem 0x000cd600-0x000cffff] has been reserved [ 0.233325] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.233329] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.233332] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.233336] system 00:0c: [mem 0x77ef0000-0x77feffff] could not be reserved [ 0.233340] system 00:0c: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.233344] system 00:0c: [mem 0x77ee0000-0x77efffff] could not be reserved [ 0.233347] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.233351] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.233355] system 00:0c: [mem 0x00100000-0x77edffff] could not be reserved [ 0.233359] system 00:0c: [mem 0x77ff0000-0x7ffeffff] could not be reserved [ 0.233362] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.233366] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.233370] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.233373] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.233383] pnp: PnP ACPI: found 13 devices [ 0.233385] ACPI: ACPI bus type pnp unregistered [ 0.241496] PCI: max bus depth: 1 pci_try_num: 2 [ 0.241519] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.241523] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.241527] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.241531] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.241540] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.241543] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.241547] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.241551] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.241554] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.241559] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.241563] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.241570] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.241575] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.241592] pci 0000:00:07.0: setting latency timer to 64 [ 0.241601] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.241604] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.241607] pci_bus 0000:00: resource 6 [mem 0xe0400000-0xfcffffffff] [ 0.241610] pci_bus 0000:00: resource 7 [mem 0x80000000-0xe03fffff] [ 0.241613] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.241616] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff] [ 0.241619] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.241622] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.241625] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.241628] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.241631] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.241634] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.241637] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref] [ 0.241640] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.241642] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] [ 0.241645] pci_bus 0000:03: resource 6 [mem 0xe0400000-0xfcffffffff] [ 0.241648] pci_bus 0000:03: resource 7 [mem 0x80000000-0xe03fffff] [ 0.241741] NET: Registered protocol family 2 [ 0.241907] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.243038] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.245313] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.245870] TCP: Hash tables configured (established 262144 bind 65536) [ 0.245873] TCP reno registered [ 0.245887] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.245915] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.246090] NET: Registered protocol family 1 [ 0.480063] pci 0000:01:05.0: Boot video device [ 0.480069] PCI: CLS 32 bytes, default 64 [ 0.480129] Unpacking initramfs... [ 0.814678] Freeing initrd memory: 11592k freed [ 0.823838] audit: initializing netlink socket (disabled) [ 0.823855] type=2000 audit(1326587528.816:1): initialized [ 0.847629] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.863866] VFS: Disk quotas dquot_6.5.2 [ 0.863909] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.864014] msgmni has been set to 3763 [ 0.864273] alg: No test for stdrng (krng) [ 0.864319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.864324] io scheduler noop registered [ 0.864327] io scheduler deadline registered [ 0.864349] io scheduler cfq registered (default) [ 0.864556] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.864595] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X [ 0.864852] ERST: Table is not found! [ 0.864855] GHES: HEST is not enabled! [ 0.864941] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.885442] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.944803] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.952333] Linux agpgart interface v0.103 [ 0.952468] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 0.952471] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.952895] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.952903] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.953080] mousedev: PS/2 mouse device common for all mice [ 0.953139] rtc_cmos 00:04: RTC can wake from S4 [ 0.953265] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.953306] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.953322] cpuidle: using governor ladder [ 0.953325] cpuidle: using governor menu [ 0.953622] TCP cubic registered [ 0.953688] NET: Registered protocol family 10 [ 0.954356] Mobile IPv6 [ 0.954359] NET: Registered protocol family 17 [ 0.954364] Registering the dns_resolver key type [ 0.954544] PM: Hibernation image not present or could not be loaded. [ 0.954557] registered taskstats version 1 [ 0.962865] rtc_cmos 00:04: setting system clock to 2012-01-15 00:32:09 UTC (1326587529) [ 0.962912] Initializing network drop monitor service [ 0.964451] Freeing unused kernel memory: 556k freed [ 0.964727] Write protecting the kernel read-only data: 6144k [ 0.968872] Freeing unused kernel memory: 804k freed [ 0.972872] Freeing unused kernel memory: 696k freed [ 1.043680] udevd[75]: starting version 175 [ 1.110417] SCSI subsystem initialized [ 1.114404] usbcore: registered new interface driver usbfs [ 1.114434] usbcore: registered new interface driver hub [ 1.124071] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.124124] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.124160] r8169 0000:02:00.0: setting latency timer to 64 [ 1.124221] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 1.124822] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000364000, 00:1e:8c:aa:1d:b5, XID 18000000 IRQ 41 [ 1.126768] usbcore: registered new device driver usb [ 1.127443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.133530] ACPI: Fan [FAN] (on) [ 1.134381] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463) [ 1.134391] ACPI: [Package] has zero elements (ffff880072680680) [ 1.134430] ACPI: Invalid passive threshold [ 1.134637] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.134639] ACPI: Thermal Zone [THRM] (40 C) [ 1.141276] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.141305] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 1.141347] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.141388] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 1.141403] ehci_hcd 0000:00:13.5: debug port 1 [ 1.141442] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 1.145617] libata version 3.00 loaded. [ 1.152041] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.152077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.152081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.152084] usb usb1: Product: EHCI Host Controller [ 1.152087] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd [ 1.152089] usb usb1: SerialNumber: 0000:00:13.5 [ 1.152245] hub 1-0:1.0: USB hub found [ 1.152251] hub 1-0:1.0: 10 ports detected [ 1.153005] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.156475] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.157650] scsi0 : pata_atiixp [ 1.158093] scsi1 : pata_atiixp [ 1.158528] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 1.158532] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 1.158940] ahci 0000:00:12.0: version 3.0 [ 1.158973] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.159002] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA [ 1.159119] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.159124] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.160175] scsi2 : ahci [ 1.160261] scsi3 : ahci [ 1.160339] scsi4 : ahci [ 1.160414] scsi5 : ahci [ 1.160557] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.160562] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.160567] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.160571] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.160699] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.160722] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.160742] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.160781] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 1.220039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.220044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.220047] usb usb2: Product: OHCI Host Controller [ 1.220049] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.220052] usb usb2: SerialNumber: 0000:00:13.0 [ 1.220227] hub 2-0:1.0: USB hub found [ 1.220237] hub 2-0:1.0: 2 ports detected [ 1.220430] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.220456] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.220469] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.220508] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 1.280027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.280031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.280034] usb usb3: Product: OHCI Host Controller [ 1.280036] usb usb3: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.280039] usb usb3: SerialNumber: 0000:00:13.1 [ 1.280195] hub 3-0:1.0: USB hub found [ 1.280203] hub 3-0:1.0: 2 ports detected [ 1.280372] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.280395] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.280407] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.280447] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 1.332577] ata1.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33 [ 1.332585] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33 [ 1.340032] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.340036] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.340039] usb usb4: Product: OHCI Host Controller [ 1.340041] usb usb4: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.340044] usb usb4: SerialNumber: 0000:00:13.2 [ 1.340227] hub 4-0:1.0: USB hub found [ 1.340234] hub 4-0:1.0: 2 ports detected [ 1.340369] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.340387] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.340397] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.340417] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.348500] ata1.00: configured for UDMA/33 [ 1.364420] ata1.01: configured for UDMA/33 [ 1.372115] scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5 [ 1.376021] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5 [ 1.400032] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.400036] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.400039] usb usb5: Product: OHCI Host Controller [ 1.400041] usb usb5: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.400044] usb usb5: SerialNumber: 0000:00:13.3 [ 1.400191] hub 5-0:1.0: USB hub found [ 1.400198] hub 5-0:1.0: 2 ports detected [ 1.400348] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.400373] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.400386] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.400410] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.460023] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.460026] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.460028] usb usb6: Product: OHCI Host Controller [ 1.460031] usb usb6: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.460034] usb usb6: SerialNumber: 0000:00:13.4 [ 1.460161] hub 6-0:1.0: USB hub found [ 1.460168] hub 6-0:1.0: 2 ports detected [ 1.480034] ata6: SATA link down (SStatus 0 SControl 300) [ 1.480101] ata5: SATA link down (SStatus 0 SControl 300) [ 1.480139] ata4: SATA link down (SStatus 0 SControl 300) [ 1.652020] ata3: softreset failed (device not ready) [ 1.652059] ata3: applying PMP SRST workaround and retrying [ 1.784016] usb 2-1: new low speed USB device number 2 using ohci_hcd [ 1.824070] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.829588] ata3.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100 [ 1.829592] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.829597] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.835172] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.835176] ata3.00: configured for UDMA/100 [ 1.835359] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5 [ 1.862158] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.862163] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.862553] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.862742] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.862746] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 1.862800] sd 2:0:0:0: [sda] Write Protect is off [ 1.862804] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.862849] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.869661] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.869938] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 1.881030] sda: sda1 sda2 [ 1.881376] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.954060] usb 2-1: New USB device found, idVendor=046d, idProduct=c312 [ 1.954065] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.954069] usb 2-1: Product: USB Multimedia Keyboard [ 1.954071] usb 2-1: Manufacturer: LITEON Technology [ 2.220024] usb 2-2: new full speed USB device number 3 using ohci_hcd [ 2.387057] usb 2-2: New USB device found, idVendor=058f, idProduct=9254 [ 2.387060] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.387063] usb 2-2: Product: Generic USB Hub [ 2.387066] usb 2-2: Manufacturer: ALCOR [ 2.389098] hub 2-2:1.0: USB hub found [ 2.391056] hub 2-2:1.0: 4 ports detected [ 2.413405] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input0 [ 2.413522] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0 [ 2.413545] usbcore: registered new interface driver usbhid [ 2.413547] usbhid: USB HID core driver [ 2.546247] md: raid1 personality registered for level 1 [ 2.551722] md: md0 stopped. [ 2.552928] md: bind<sda1> [ 2.555228] bio: create slab <bio-1> at 1 [ 2.555371] md/raid1:md0: active with 1 out of 2 mirrors [ 2.555401] md0: detected capacity change from 0 to 509804544 [ 2.556156] md0: unknown partition table [ 2.558490] md: md1 stopped. [ 2.559875] md: bind<sda2> [ 2.562986] md/raid1:md1: active with 1 out of 2 mirrors [ 2.563015] md1: detected capacity change from 0 to 1999886286848 [ 2.566080] md1: unknown partition table [ 2.571304] device-mapper: uevent: version 1.0.3 [ 2.571572] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 13.671097] Intel AES-NI instructions are not detected. [ 14.653524] PM: Starting manual resume from disk [ 14.653530] PM: Hibernation image partition 253:2 present [ 14.653532] PM: Looking for hibernation image. [ 14.653799] PM: Image not found (code -22) [ 14.653804] PM: Hibernation image not present or could not be loaded. [ 14.663791] kjournald starting. Commit interval 5 seconds [ 14.663821] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 15.996814] udevd[423]: starting version 175 [ 16.606950] parport_pc 00:09: reported by Plug and Play ACPI [ 16.606985] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 16.633415] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 16.663758] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.745833] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 16.745931] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 16.754707] MCE: In-kernel MCE decoding enabled. [ 16.758348] EDAC MC: Ver: 2.1.0 [ 16.760330] AMD64 EDAC driver v3.4.0 [ 16.760433] EDAC amd64: DRAM ECC disabled. [ 16.760439] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 16.760441] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 16.760443] (Note that use of the override may cause unknown side effects.) [ 16.824558] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 16.852801] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 16.853225] ACPI: Power Button [PWRB] [ 16.853319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 16.853423] ACPI: Power Button [PWRF] [ 16.904532] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.907775] ACPI: acpi_idle registered with cpuidle [ 17.457491] [drm] Initialized drm 1.1.0 20060810 [ 17.625516] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 17.677343] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.882184] [drm] radeon kernel modesetting enabled. [ 17.882363] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 17.882708] [drm] initializing kernel modesetting (RS690 0x1002:0x791E 0x1043:0x826D). [ 17.882733] [drm] register mmio base: 0xFDBF0000 [ 17.882735] [drm] register mmio size: 65536 [ 17.884639] ATOM BIOS: ATI [ 17.884665] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 17.884668] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 17.884691] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 17.884693] [drm] Driver supports precise vblank timestamp query. [ 17.884707] [drm] radeon: irq initialized. [ 17.885010] [drm] Detected VRAM RAM=128M, BAR=128M [ 17.885014] [drm] RAM width 128bits DDR [ 17.885099] [TTM] Zone kernel: Available graphics memory: 964468 kiB. [ 17.885102] [TTM] Initializing pool allocator. [ 17.885136] [drm] radeon: 128M of VRAM memory ready [ 17.885138] [drm] radeon: 512M of GTT memory ready. [ 17.885162] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 17.896033] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 17.907962] radeon 0000:01:05.0: WB enabled [ 17.908049] [drm] Loading RS690/RS740 Microcode [ 17.972470] [drm] radeon: ring at 0x0000000080001000 [ 17.972491] [drm] ring test succeeded in 1 usecs [ 17.972654] [drm] radeon: ib pool ready. [ 17.972728] [drm] ib test succeeded in 0 usecs [ 17.972737] failed to evaluate ATIF got AE_BAD_PARAMETER [ 17.973011] [drm] Radeon Display Connectors [ 17.973013] [drm] Connector 0: [ 17.973015] [drm] VGA [ 17.973018] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 17.973020] [drm] Encoders: [ 17.973022] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 17.973024] [drm] Connector 1: [ 17.973025] [drm] S-video [ 17.973027] [drm] Encoders: [ 17.973028] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 17.973030] [drm] Connector 2: [ 17.973032] [drm] HDMI-A [ 17.973033] [drm] HPD2 [ 17.973036] [drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c [ 17.973038] [drm] Encoders: [ 17.973040] [drm] DFP2: INTERNAL_DDI [ 17.973042] [drm] Connector 3: [ 17.973043] [drm] DVI-D [ 17.973046] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 17.973048] [drm] Encoders: [ 17.973050] [drm] DFP3: INTERNAL_LVTM1 [ 17.983611] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 18.035001] Raw EDID: [ 18.035040] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035078] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035116] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035154] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035192] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035229] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035267] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035305] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.035346] radeon 0000:01:05.0: HDMI-A-1: EDID block 0 invalid. [ 18.035349] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 18.086638] [drm] Radeon display connector DVI-D-1: Found valid EDID [ 18.338797] [drm] fb mappable at 0xF0040000 [ 18.338800] [drm] vram apper at 0xF0000000 [ 18.338802] [drm] size 5242880 [ 18.338804] [drm] fb depth is 24 [ 18.338806] [drm] pitch is 5120 [ 18.338927] fbcon: radeondrmfb (fb0) is primary device [ 18.350662] Console: switching to colour frame buffer device 160x64 [ 18.361274] fb0: radeondrmfb frame buffer device [ 18.361276] drm: registered panic notifier [ 18.361284] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:05.0 on minor 0 [ 18.875481] EXT3-fs (dm-1): using internal journal [ 19.321486] loop: module loaded [ 19.417778] kvm: Nested Virtualization enabled [ 20.290955] Adding 4194300k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194300k [ 22.208871] fuse init (API version 7.17) [ 22.392859] kjournald starting. Commit interval 5 seconds [ 22.424894] EXT3-fs (md0): using internal journal [ 22.424899] EXT3-fs (md0): mounted filesystem with ordered data mode [ 22.519662] kjournald starting. Commit interval 5 seconds [ 22.583417] EXT3-fs (dm-6): using internal journal [ 22.583424] EXT3-fs (dm-6): mounted filesystem with ordered data mode [ 22.788495] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 22.789028] SGI XFS Quota Management subsystem [ 22.866552] XFS (dm-7): Mounting Filesystem [ 23.025197] XFS (dm-7): Ending clean mount [ 23.056796] XFS (dm-8): Mounting Filesystem [ 23.194113] XFS (dm-8): Ending clean mount [ 23.242498] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal [ 23.242509] REISERFS (device dm-5): using ordered data mode [ 23.242511] reiserfs: using flush barriers [ 23.252200] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 23.253854] REISERFS (device dm-5): checking transaction log (dm-5) [ 23.378544] REISERFS (device dm-5): Using r5 hash to sort names [ 23.430422] kjournald starting. Commit interval 5 seconds [ 23.430953] EXT3-fs (dm-3): using internal journal [ 23.430960] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 23.487057] kjournald starting. Commit interval 5 seconds [ 23.487348] EXT3-fs (dm-4): using internal journal [ 23.487355] EXT3-fs (dm-4): mounted filesystem with ordered data mode [ 27.488752] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 (2 cpu cores) (version 2.20.00) [ 27.488804] powernow-k8: fid 0xd (2100 MHz), vid 0xe [ 27.488807] powernow-k8: fid 0xc (2000 MHz), vid 0xf [ 27.488809] powernow-k8: fid 0xa (1800 MHz), vid 0x11 [ 27.488812] powernow-k8: fid 0x2 (1000 MHz), vid 0x16 [ 44.324280] postgres (1419): /proc/1419/oom_adj is deprecated, please use /proc/1419/oom_score_adj instead. [ 56.643271] r8169 0000:02:00.0: eth0: link down [ 56.644243] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 58.383927] r8169 0000:02:00.0: eth0: link up [ 58.385222] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 59.527311] ip_tables: (C) 2000-2006 Netfilter Core Team [ 60.381300] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 68.528030] eth0: no IPv6 routers present [ 391.416084] PM: Syncing filesystems ... done. [ 392.364283] PM: Preparing system for mem sleep [ 392.452066] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 392.468094] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 392.484038] PM: Entering mem sleep [ 392.484060] Suspending console(s) (use no_console_suspend to debug) [ 392.484514] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 392.484708] sd 2:0:0:0: [sda] Stopping disk [ 392.493982] i8042 aux 00:0a: wake-up capability disabled by ACPI [ 392.494066] parport_pc 00:09: disabled [ 392.494140] serial 00:08: disabled [ 392.494166] serial 00:08: wake-up capability disabled by ACPI [ 392.495352] ehci_hcd 0000:00:13.5: PCI INT D disabled [ 392.495364] ohci_hcd 0000:00:13.4: PCI INT C disabled [ 392.495375] ohci_hcd 0000:00:13.3: PCI INT B disabled [ 392.495387] ohci_hcd 0000:00:13.2: PCI INT C disabled [ 392.495398] ohci_hcd 0000:00:13.1: PCI INT B disabled [ 392.495522] pata_atiixp 0000:00:14.1: PCI INT A disabled [ 392.556108] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 392.596117] snd_hda_intel 0000:00:14.2: PCI INT A disabled [ 392.686281] radeon 0000:01:05.0: PCI INT A disabled [ 392.922144] ahci 0000:00:12.0: PCI INT A disabled [ 392.922167] PM: suspend of devices complete after 437.912 msecs [ 392.922367] r8169 0000:02:00.0: PME# enabled [ 392.922383] pcieport 0000:00:07.0: wake-up capability enabled by ACPI [ 392.952175] PM: late suspend of devices complete after 30.002 msecs [ 392.952271] ACPI: Preparing to enter system sleep state S3 [ 392.952371] PM: Saving platform NVS memory [ 392.952413] Disabling non-boot CPUs ... [ 393.056094] CPU 1 is now offline [ 393.056732] ACPI: Low-level resume complete [ 393.056732] PM: Restoring platform NVS memory [ 393.056732] Enabling non-boot CPUs ... [ 393.056732] Booting Node 0 Processor 1 APIC 0x1 [ 393.056732] smpboot cpu 1: start_ip = 9a000 [ 392.953815] Calibrating delay loop (skipped) already calibrated this CPU [ 393.068587] NMI watchdog enabled, takes one hw-pmu counter. [ 393.068818] CPU1 is up [ 393.069127] ACPI: Waking up from system sleep state S3 [ 393.069272] pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 393.069300] pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 393.069338] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [ 393.069356] ahci 0000:00:12.0: set SATA to AHCI mode [ 393.069379] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003) [ 393.069407] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003) [ 393.069434] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003) [ 393.069461] ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003) [ 393.069488] ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003) [ 393.069522] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [ 393.069611] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) [ 393.069712] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 393.069728] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfdfff004) [ 393.069734] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xdc01) [ 393.069740] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 393.069746] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 393.069877] PM: early resume of devices complete after 0.637 msecs [ 393.069997] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 393.070067] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 393.070093] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 393.070160] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 393.070183] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 393.070202] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 393.070223] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 393.070236] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 393.070255] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 393.070301] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 393.070309] pcieport 0000:00:07.0: wake-up capability disabled by ACPI [ 393.070315] r8169 0000:02:00.0: PME# disabled [ 393.071533] serial 00:08: activated [ 393.072026] Switched to NOHz mode on CPU #1 [ 393.072149] parport_pc 00:09: activated [ 393.072674] sd 2:0:0:0: [sda] Starting disk [ 393.173082] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 393.181090] radeon 0000:01:05.0: WB enabled [ 393.181126] [drm] radeon: ring at 0x0000000080001000 [ 393.181144] [drm] ring test succeeded in 1 usecs [ 393.181162] [drm] ib test succeeded in 0 usecs [ 393.232509] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 393.232514] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out [ 393.280520] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 393.280526] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 393.288419] ata1.00: configured for UDMA/33 [ 393.304438] ata1.01: configured for UDMA/33 [ 393.388038] ata6: SATA link down (SStatus 0 SControl 300) [ 393.388068] ata5: SATA link down (SStatus 0 SControl 300) [ 393.388098] ata4: SATA link down (SStatus 0 SControl 300) [ 393.508035] usb 2-1: reset low speed USB device number 2 using ohci_hcd [ 393.948028] usb 2-2: reset full speed USB device number 3 using ohci_hcd [ 403.080018] ata3: softreset failed (device not ready) [ 406.932018] ata3: softreset failed (device not ready) [ 406.932021] ata3: applying PMP SRST workaround and retrying [ 407.104028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 407.110405] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 407.116371] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 407.116374] ata3.00: configured for UDMA/100 [ 407.169107] PM: resume of devices complete after 14099.162 msecs [ 407.169455] PM: Finishing wakeup. [ 407.169457] Restarting tasks ... done. [ 410.224100] r8169 0000:02:00.0: eth0: link down [ 410.224113] r8169 0000:02:00.0: eth0: link down [ 410.229882] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 411.848492] r8169 0000:02:00.0: eth0: link up [ 411.849341] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 422.776039] eth0: no IPv6 routers present
Attachment:
signature.asc
Description: This is a digitally signed message part