Dear Jonathan, thank you for the fast response. Am Samstag, den 14.01.2012, 18:17 -0600 schrieb Jonathan Nieder: > Paul Menzel wrote: > > > with my ASUS M2A-VM [1] system suspend and resume does not work. The > > system suspends fine but pressing the power button afterward the fans > > start turning and the CD drives make noises but the screen does not > > receive any signal and the system even cannot be pinged from another > > system. Therefore I am left to cold reset(?) the system and even > > netconsole does not print anything when resuming the system. > > > > The strange thing is, using the Debian based live system Grml 2011.12 > > [2] suspend and resume works fine. The difference is that Grml loads the > > Radeon graphics firmware(?) and I do not have `linux-firmware-nonfree` > > installed. > > Yep, that's believable. I imagine when booting in recovery mode with > radeon.modeset=0 on the command line, suspend and resume works fine? I will try that too. > Please provide full "dmesg" output from booting up the affected system. Please find it attached. Thanks, Paul
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 06:25:07 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/speicher-root ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ee0000 (usable) [ 0.000000] BIOS-e820: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ee3000 - 0000000077ef0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077f00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/M2A-VM, BIOS ASUS M2A-VM ACPI BIOS Revision 1604 12/19/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x77ee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 base 0077F00000 mask FFFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f6560] f6560 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000077ee0000 [ 0.000000] 0000000000 - 0077e00000 page 2M [ 0.000000] 0077e00000 - 0077ee0000 page 4k [ 0.000000] kernel direct mapping tables up to 77ee0000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 3694c000 - 3749e000 [ 0.000000] ACPI: RSDP 00000000000f8210 00024 (v02 ATI ) [ 0.000000] ACPI: XSDT 0000000077ee3100 0004C (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0000000077ee8440 000F4 (v03 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0000000077ee3280 0515D (v01 ATI ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000077ee0000 00040 [ 0.000000] ACPI: SSDT 0000000077ee8680 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0000000077ee8900 00038 (v01 ATI ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0000000077ee8980 0003C (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0000000077ee8580 00084 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077ee0000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000077ee0000 [ 0.000000] NODE_DATA [0000000077edb000 - 0000000077edffff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075800000-ffff8800773fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077ee0 [ 0.000000] On node 0 totalpages: 491119 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6661 pages used for memmap [ 0.000000] DMA32 zone: 480475 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8200 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 77f00000 (gap: 77f00000:68100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880077c00000 s80768 r8192 d21632 u524288 [ 0.000000] pcpu-alloc: s80768 r8192 d21632 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 484397 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/speicher-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 29fe000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1915288k/1964928k available (3275k kernel code, 452k absent, 49188k reserved, 3444k data, 556k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2100.186 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.37 BogoMIPS (lpj=8400744) [ 0.004014] pid_max: default: 32768 minimum: 301 [ 0.004083] Security Framework initialized [ 0.004319] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005582] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.008576] Mount-cache hash table entries: 256 [ 0.008757] Initializing cgroup subsys cpuacct [ 0.008763] Initializing cgroup subsys memory [ 0.008781] Initializing cgroup subsys devices [ 0.008786] Initializing cgroup subsys freezer [ 0.008789] Initializing cgroup subsys net_cls [ 0.008792] Initializing cgroup subsys blkio [ 0.008839] tseg: 0077f00000 [ 0.008842] CPU: Physical Processor ID: 0 [ 0.008844] CPU: Processor Core ID: 0 [ 0.008846] mce: CPU supports 5 MCE banks [ 0.008860] using AMD E400 aware idle routine [ 0.009204] ACPI: Core revision 20110623 [ 0.012620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.055795] CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02 [ 0.056003] Performance Events: AMD PMU driver. [ 0.056003] ... version: 0 [ 0.056003] ... bit width: 48 [ 0.056003] ... generic registers: 4 [ 0.056003] ... value mask: 0000ffffffffffff [ 0.056003] ... max period: 00007fffffffffff [ 0.056003] ... fixed-purpose events: 0 [ 0.056003] ... event mask: 000000000000000f [ 0.056003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.056003] Booting Node 0, Processors #1 [ 0.056003] smpboot cpu 1: start_ip = 9a000 [ 0.140073] NMI watchdog enabled, takes one hw-pmu counter. [ 0.140100] Brought up 2 CPUs [ 0.140103] Total of 2 processors activated (8400.19 BogoMIPS). [ 0.140625] devtmpfs: initialized [ 0.144167] PM: Registering ACPI NVS region at 77ee0000 (12288 bytes) [ 0.144212] print_constraints: dummy: [ 0.144294] NET: Registered protocol family 16 [ 0.144426] node 0 link 0: io port [b000, ffff] [ 0.144430] TOM: 0000000080000000 aka 2048M [ 0.144433] node 0 link 0: mmio [a0000, bffff] [ 0.144437] node 0 link 0: mmio [80000000, dfffffff] [ 0.144441] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.144444] node 0 link 0: mmio [e0000000, e03fffff] [ 0.144448] bus: [00, 03] on node 0 link 0 [ 0.144451] bus: 00 index 0 [io 0x0000-0xffff] [ 0.144454] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.144456] bus: 00 index 2 [mem 0x80000000-0xefffffff] [ 0.144459] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] [ 0.144471] ACPI: bus type pci registered [ 0.144552] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.144556] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.164264] PCI: Using configuration type 1 for base access [ 0.164887] bio: create slab <bio-0> at 0 [ 0.164887] ACPI: Added _OSI(Module Device) [ 0.164887] ACPI: Added _OSI(Processor Device) [ 0.164887] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.164887] ACPI: Added _OSI(Processor Aggregator Device) [ 0.164887] ACPI: EC: Look up EC in DSDT [ 0.171786] ACPI: Interpreter enabled [ 0.171791] ACPI: (supports S0 S1 S3 S4 S5) [ 0.171820] ACPI: Using IOAPIC for interrupt routing [ 0.177058] ACPI: No dock devices found. [ 0.177061] HEST: Table not found. [ 0.177066] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.177153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.177334] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.177338] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.177341] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.177344] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.177348] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 0.177361] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.177398] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.177446] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604 [ 0.177476] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.177480] pci 0000:00:07.0: PME# disabled [ 0.177521] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.177541] pci 0000:00:12.0: reg 10: [io 0xfc00-0xfc07] [ 0.177554] pci 0000:00:12.0: reg 14: [io 0xf800-0xf803] [ 0.177566] pci 0000:00:12.0: reg 18: [io 0xf400-0xf407] [ 0.177578] pci 0000:00:12.0: reg 1c: [io 0xf000-0xf003] [ 0.177590] pci 0000:00:12.0: reg 20: [io 0xec00-0xec0f] [ 0.177602] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.177626] pci 0000:00:12.0: set SATA to AHCI mode [ 0.177661] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.177678] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.177756] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.177772] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.177849] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.177865] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.177942] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.177958] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.178035] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.178051] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.178136] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.178158] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.178239] pci 0000:00:13.5: supports D1 D2 [ 0.178242] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.178247] pci 0000:00:13.5: PME# disabled [ 0.178367] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.178745] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.181134] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.181150] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.181161] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.181173] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.181185] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.181196] pci 0000:00:14.1: reg 20: [io 0xe400-0xe40f] [ 0.181242] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.181268] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.181335] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.181340] pci 0000:00:14.2: PME# disabled [ 0.181359] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.181447] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.181504] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.181531] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.181554] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.181578] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.181611] PCI: peer root bus 00 res updated from pci conf [ 0.181644] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300 [ 0.181657] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.181665] pci 0000:01:05.0: reg 18: [mem 0xfdbf0000-0xfdbfffff 64bit] [ 0.181671] pci 0000:01:05.0: reg 20: [io 0xcc00-0xccff] [ 0.181677] pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff] [ 0.181692] pci 0000:01:05.0: supports D1 D2 [ 0.181711] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.181715] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.181719] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.181724] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.181778] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.181795] pci 0000:02:00.0: reg 10: [io 0xdc00-0xdcff] [ 0.181822] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit] [ 0.181853] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.181894] pci 0000:02:00.0: supports D1 D2 [ 0.181896] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.181901] pci 0000:02:00.0: PME# disabled [ 0.181921] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.181932] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.181936] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.181940] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.181945] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.182015] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.182020] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.182025] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.182031] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.182034] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.182038] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.182041] pci 0000:00:14.4: bridge window [mem 0x80000000-0xefffffff] (subtractive decode) [ 0.182045] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfcffffffff] (subtractive decode) [ 0.182060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.182358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.182477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.182527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.182583] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.182588] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.182590] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.203817] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.203879] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.203938] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.203998] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.204068] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.204127] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.204186] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [ 0.204244] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.204355] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.204355] vgaarb: loaded [ 0.204355] vgaarb: bridge control possible 0000:01:05.0 [ 0.204355] PCI: Using ACPI for IRQ routing [ 0.214636] PCI: pci_cache_line_size set to 64 bytes [ 0.214903] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.214907] reserve RAM buffer: 0000000077ee0000 - 0000000077ffffff [ 0.215060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.215066] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.217070] Switching to clocksource hpet [ 0.219484] pnp: PnP ACPI init [ 0.219506] ACPI: bus type pnp registered [ 0.219675] pnp 00:00: [bus 00-ff] [ 0.219679] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.219682] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.219685] pnp 00:00: [io 0x0d00-0xffff window] [ 0.219688] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.219692] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.219695] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.219767] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.219873] pnp 00:01: [io 0x4100-0x411f] [ 0.219876] pnp 00:01: [io 0x0228-0x022f] [ 0.219879] pnp 00:01: [io 0x040b] [ 0.219881] pnp 00:01: [io 0x04d6] [ 0.219884] pnp 00:01: [io 0x0c00-0x0c01] [ 0.219887] pnp 00:01: [io 0x0c14] [ 0.219889] pnp 00:01: [io 0x0c50-0x0c52] [ 0.219892] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.219895] pnp 00:01: [io 0x0c6f] [ 0.219897] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.219900] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.219903] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.219906] pnp 00:01: [io 0x4000-0x40fe] [ 0.219908] pnp 00:01: [io 0x4210-0x4217] [ 0.219911] pnp 00:01: [io 0x0b00-0x0b0f] [ 0.219914] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.219917] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.219920] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.219920] Switched to NOHz mode on CPU #0 [ 0.218945] Switched to NOHz mode on CPU #1 [ 0.219920] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.219920] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.219920] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.219920] system 00:01: [io 0x040b] has been reserved [ 0.219920] system 00:01: [io 0x04d6] has been reserved [ 0.219920] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.219920] system 00:01: [io 0x0c14] has been reserved [ 0.219920] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.219920] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.219920] system 00:01: [io 0x0c6f] has been reserved [ 0.219920] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.219920] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.219920] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.219920] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.219920] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.219920] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.219920] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.219920] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.219920] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219920] pnp 00:02: [dma 4] [ 0.219920] pnp 00:02: [io 0x0000-0x000f] [ 0.219920] pnp 00:02: [io 0x0080-0x0090] [ 0.219920] pnp 00:02: [io 0x0094-0x009f] [ 0.219920] pnp 00:02: [io 0x00c0-0x00df] [ 0.219920] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.219920] pnp 00:03: [irq 0 disabled] [ 0.219920] pnp 00:03: [irq 8] [ 0.219920] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.219920] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.219920] pnp 00:04: [io 0x0070-0x0073] [ 0.219920] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.219920] pnp 00:05: [io 0x0061] [ 0.219920] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.219920] pnp 00:06: [io 0x00f0-0x00ff] [ 0.219920] pnp 00:06: [irq 13] [ 0.219920] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.219920] pnp 00:07: [io 0x0010-0x001f] [ 0.219920] pnp 00:07: [io 0x0022-0x003f] [ 0.219920] pnp 00:07: [io 0x0044-0x005f] [ 0.219920] pnp 00:07: [io 0x0062-0x0063] [ 0.219920] pnp 00:07: [io 0x0065-0x006f] [ 0.219920] pnp 00:07: [io 0x0074-0x007f] [ 0.219920] pnp 00:07: [io 0x0091-0x0093] [ 0.219920] pnp 00:07: [io 0x00a2-0x00bf] [ 0.219920] pnp 00:07: [io 0x00e0-0x00ef] [ 0.219920] pnp 00:07: [io 0x04d0-0x04d1] [ 0.219920] pnp 00:07: [io 0x0220-0x0225] [ 0.219920] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.219920] system 00:07: [io 0x0220-0x0225] has been reserved [ 0.219920] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220077] pnp 00:08: [io 0x03f8-0x03ff] [ 0.220087] pnp 00:08: [irq 4] [ 0.220171] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.220544] pnp 00:09: [io 0x0378-0x037f] [ 0.220555] pnp 00:09: [irq 7] [ 0.220621] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.220769] pnp 00:0a: [io 0x0060] [ 0.220772] pnp 00:0a: [io 0x0064] [ 0.220782] pnp 00:0a: [irq 12] [ 0.220832] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.220915] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.220979] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.220983] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.221209] pnp 00:0c: [mem 0x000cd600-0x000cffff] [ 0.221212] pnp 00:0c: [mem 0x000f0000-0x000f7fff] [ 0.221215] pnp 00:0c: [mem 0x000f8000-0x000fbfff] [ 0.221218] pnp 00:0c: [mem 0x000fc000-0x000fffff] [ 0.221221] pnp 00:0c: [mem 0x77ef0000-0x77feffff] [ 0.221224] pnp 00:0c: [mem 0xfed00000-0xfed000ff] [ 0.221226] pnp 00:0c: [mem 0x77ee0000-0x77efffff] [ 0.221229] pnp 00:0c: [mem 0xffff0000-0xffffffff] [ 0.221232] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.221235] pnp 00:0c: [mem 0x00100000-0x77edffff] [ 0.221238] pnp 00:0c: [mem 0x77ff0000-0x7ffeffff] [ 0.221241] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.221244] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.221247] pnp 00:0c: [mem 0xfff80000-0xfffeffff] [ 0.221324] system 00:0c: [mem 0x000cd600-0x000cffff] has been reserved [ 0.221328] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.221332] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.221336] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.221339] system 00:0c: [mem 0x77ef0000-0x77feffff] could not be reserved [ 0.221343] system 00:0c: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.221347] system 00:0c: [mem 0x77ee0000-0x77efffff] could not be reserved [ 0.221351] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.221354] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.221358] system 00:0c: [mem 0x00100000-0x77edffff] could not be reserved [ 0.221362] system 00:0c: [mem 0x77ff0000-0x7ffeffff] could not be reserved [ 0.221366] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.221369] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.221373] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.221377] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.221386] pnp: PnP ACPI: found 13 devices [ 0.221388] ACPI: ACPI bus type pnp unregistered [ 0.229528] PCI: max bus depth: 1 pci_try_num: 2 [ 0.229552] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.229556] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.229560] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.229564] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.229573] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.229577] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.229580] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.229584] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.229588] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.229593] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.229597] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.229604] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.229609] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.229626] pci 0000:00:07.0: setting latency timer to 64 [ 0.229634] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.229637] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.229640] pci_bus 0000:00: resource 6 [mem 0x80000000-0xefffffff] [ 0.229643] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfcffffffff] [ 0.229646] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.229650] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff] [ 0.229653] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.229656] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.229659] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.229662] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.229665] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.229668] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.229671] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref] [ 0.229673] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.229676] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] [ 0.229679] pci_bus 0000:03: resource 6 [mem 0x80000000-0xefffffff] [ 0.229682] pci_bus 0000:03: resource 7 [mem 0xf0000000-0xfcffffffff] [ 0.229774] NET: Registered protocol family 2 [ 0.229939] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.231074] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.233359] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.233918] TCP: Hash tables configured (established 262144 bind 65536) [ 0.233921] TCP reno registered [ 0.233935] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.233963] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.234139] NET: Registered protocol family 1 [ 0.468063] pci 0000:01:05.0: Boot video device [ 0.468069] PCI: CLS 32 bytes, default 64 [ 0.468129] Unpacking initramfs... [ 0.802808] Freeing initrd memory: 11592k freed [ 0.811978] audit: initializing netlink socket (disabled) [ 0.811996] type=2000 audit(1326467535.804:1): initialized [ 0.835889] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.852202] VFS: Disk quotas dquot_6.5.2 [ 0.852246] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.852336] msgmni has been set to 3763 [ 0.852608] alg: No test for stdrng (krng) [ 0.852651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.852655] io scheduler noop registered [ 0.852658] io scheduler deadline registered [ 0.852683] io scheduler cfq registered (default) [ 0.852894] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.852932] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X [ 0.853185] ERST: Table is not found! [ 0.853187] GHES: HEST is not enabled! [ 0.853286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.873789] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.928806] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.944314] Linux agpgart interface v0.103 [ 0.944448] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 0.944451] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.944877] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.944885] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.945060] mousedev: PS/2 mouse device common for all mice [ 0.945120] rtc_cmos 00:04: RTC can wake from S4 [ 0.945254] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.945293] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.945309] cpuidle: using governor ladder [ 0.945312] cpuidle: using governor menu [ 0.945571] TCP cubic registered [ 0.945636] NET: Registered protocol family 10 [ 0.946312] Mobile IPv6 [ 0.946316] NET: Registered protocol family 17 [ 0.946321] Registering the dns_resolver key type [ 0.946514] PM: Hibernation image not present or could not be loaded. [ 0.946528] registered taskstats version 1 [ 0.954853] rtc_cmos 00:04: setting system clock to 2012-01-13 15:12:16 UTC (1326467536) [ 0.954903] Initializing network drop monitor service [ 0.956435] Freeing unused kernel memory: 556k freed [ 0.956713] Write protecting the kernel read-only data: 6144k [ 0.960850] Freeing unused kernel memory: 804k freed [ 0.964851] Freeing unused kernel memory: 696k freed [ 1.034922] udevd[75]: starting version 175 [ 1.094886] usbcore: registered new interface driver usbfs [ 1.094914] usbcore: registered new interface driver hub [ 1.106688] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.106743] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.106780] r8169 0000:02:00.0: setting latency timer to 64 [ 1.106841] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 1.107422] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000378000, 00:1e:8c:aa:1d:b5, XID 18000000 IRQ 41 [ 1.112866] SCSI subsystem initialized [ 1.113181] usbcore: registered new device driver usb [ 1.113990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.122391] ACPI: Fan [FAN] (on) [ 1.129934] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463) [ 1.129943] ACPI: [Package] has zero elements (ffff8800372f3d80) [ 1.129982] ACPI: Invalid passive threshold [ 1.130189] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.130192] ACPI: Thermal Zone [THRM] (40 C) [ 1.134172] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.134205] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 1.134257] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.134298] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 1.134314] ehci_hcd 0000:00:13.5: debug port 1 [ 1.134352] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 1.144073] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.144107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.144111] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.144114] usb usb1: Product: EHCI Host Controller [ 1.144116] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd [ 1.144118] usb usb1: SerialNumber: 0000:00:13.5 [ 1.144273] hub 1-0:1.0: USB hub found [ 1.144279] hub 1-0:1.0: 10 ports detected [ 1.144990] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.148079] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.148110] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.148139] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.148186] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 1.151313] libata version 3.00 loaded. [ 1.208039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.208044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.208047] usb usb2: Product: OHCI Host Controller [ 1.208050] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.208052] usb usb2: SerialNumber: 0000:00:13.0 [ 1.208220] hub 2-0:1.0: USB hub found [ 1.208228] hub 2-0:1.0: 2 ports detected [ 1.208435] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.208462] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.208475] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.208516] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 1.268031] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.268036] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.268039] usb usb3: Product: OHCI Host Controller [ 1.268041] usb usb3: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.268044] usb usb3: SerialNumber: 0000:00:13.1 [ 1.268217] hub 3-0:1.0: USB hub found [ 1.268225] hub 3-0:1.0: 2 ports detected [ 1.268403] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.268428] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.268440] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.268479] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 1.328028] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.328031] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.328034] usb usb4: Product: OHCI Host Controller [ 1.328036] usb usb4: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.328039] usb usb4: SerialNumber: 0000:00:13.2 [ 1.328162] hub 4-0:1.0: USB hub found [ 1.328169] hub 4-0:1.0: 2 ports detected [ 1.328292] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.328308] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.328319] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.328340] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.388022] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.388026] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.388028] usb usb5: Product: OHCI Host Controller [ 1.388031] usb usb5: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.388033] usb usb5: SerialNumber: 0000:00:13.3 [ 1.388156] hub 5-0:1.0: USB hub found [ 1.388163] hub 5-0:1.0: 2 ports detected [ 1.388280] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.388296] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.388312] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.388331] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.448024] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.448028] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.448031] usb usb6: Product: OHCI Host Controller [ 1.448033] usb usb6: Manufacturer: Linux 3.1.0-1-amd64 ohci_hcd [ 1.448036] usb usb6: SerialNumber: 0000:00:13.4 [ 1.448168] hub 6-0:1.0: USB hub found [ 1.448176] hub 6-0:1.0: 2 ports detected [ 1.448298] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.449502] scsi0 : pata_atiixp [ 1.449627] scsi1 : pata_atiixp [ 1.450063] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 1.450067] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 1.450183] ahci 0000:00:12.0: version 3.0 [ 1.450219] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.450251] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA [ 1.450372] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.450376] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.451997] scsi2 : ahci [ 1.452129] scsi3 : ahci [ 1.452225] scsi4 : ahci [ 1.452319] scsi5 : ahci [ 1.452458] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.452462] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.452467] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.452471] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.620569] ata1.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33 [ 1.620577] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33 [ 1.636499] ata1.00: configured for UDMA/33 [ 1.652418] ata1.01: configured for UDMA/33 [ 1.661098] scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5 [ 1.664989] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5 [ 1.772037] ata6: SATA link down (SStatus 0 SControl 300) [ 1.772078] ata5: SATA link down (SStatus 0 SControl 300) [ 1.772132] ata4: SATA link down (SStatus 0 SControl 300) [ 1.776019] usb 2-1: new low speed USB device number 2 using ohci_hcd [ 1.944017] ata3: softreset failed (device not ready) [ 1.944063] ata3: applying PMP SRST workaround and retrying [ 1.946053] usb 2-1: New USB device found, idVendor=046d, idProduct=c312 [ 1.946057] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.946060] usb 2-1: Product: USB Multimedia Keyboard [ 1.946062] usb 2-1: Manufacturer: LITEON Technology [ 2.116032] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.121906] ata3.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100 [ 2.121909] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.121914] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.127951] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.127955] ata3.00: configured for UDMA/100 [ 2.128126] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5 [ 2.159121] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 2.159126] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.159512] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.159687] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.159691] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.159753] sd 2:0:0:0: [sda] Write Protect is off [ 2.159757] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.159793] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.166623] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.166935] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 2.173617] sda: sda1 sda2 [ 2.173985] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.212035] usb 2-2: new full speed USB device number 3 using ohci_hcd [ 2.379056] usb 2-2: New USB device found, idVendor=058f, idProduct=9254 [ 2.379061] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.379065] usb 2-2: Product: Generic USB Hub [ 2.379067] usb 2-2: Manufacturer: ALCOR [ 2.381091] hub 2-2:1.0: USB hub found [ 2.383051] hub 2-2:1.0: 4 ports detected [ 2.405373] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input0 [ 2.405461] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0 [ 2.405484] usbcore: registered new interface driver usbhid [ 2.405486] usbhid: USB HID core driver [ 2.542428] md: raid1 personality registered for level 1 [ 2.548536] md: md0 stopped. [ 2.549806] md: bind<sda1> [ 2.552245] bio: create slab <bio-1> at 1 [ 2.552379] md/raid1:md0: active with 1 out of 2 mirrors [ 2.552408] md0: detected capacity change from 0 to 509804544 [ 2.553138] md0: unknown partition table [ 2.556364] md: md1 stopped. [ 2.557726] md: bind<sda2> [ 2.560093] md/raid1:md1: active with 1 out of 2 mirrors [ 2.560122] md1: detected capacity change from 0 to 1999886286848 [ 2.562251] md1: unknown partition table [ 2.566082] device-mapper: uevent: version 1.0.3 [ 2.566374] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 17.003584] Intel AES-NI instructions are not detected. [ 18.101543] PM: Starting manual resume from disk [ 18.101548] PM: Hibernation image partition 253:2 present [ 18.101550] PM: Looking for hibernation image. [ 18.101815] PM: Image not found (code -22) [ 18.101819] PM: Hibernation image not present or could not be loaded. [ 18.111357] EXT3-fs (dm-1): recovery required on readonly filesystem [ 18.111362] EXT3-fs (dm-1): write access will be enabled during recovery [ 18.414049] kjournald starting. Commit interval 5 seconds [ 18.414082] EXT3-fs (dm-1): recovery complete [ 18.414553] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 19.877277] udevd[428]: starting version 175 [ 20.320355] ACPI: acpi_idle registered with cpuidle [ 20.325309] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 20.325318] ACPI: Power Button [PWRB] [ 20.325412] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 20.325416] ACPI: Power Button [PWRF] [ 20.366718] parport_pc 00:09: reported by Plug and Play ACPI [ 20.366758] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 20.532580] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 20.959342] MCE: In-kernel MCE decoding enabled. [ 20.970651] EDAC MC: Ver: 2.1.0 [ 20.971644] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 20.973994] AMD64 EDAC driver v3.4.0 [ 20.974092] EDAC amd64: DRAM ECC disabled. [ 20.974098] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 20.974099] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 20.974101] (Note that use of the override may cause unknown side effects.) [ 20.982520] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 20.984336] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.310229] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 21.310340] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 21.459824] [drm] Initialized drm 1.1.0 20060810 [ 21.558265] [drm] radeon defaulting to kernel modesetting. [ 21.558269] [drm] radeon kernel modesetting enabled. [ 21.558436] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 21.558683] [drm] initializing kernel modesetting (RS690 0x1002:0x791E 0x1043:0x826D). [ 21.558707] [drm] register mmio base: 0xFDBF0000 [ 21.558710] [drm] register mmio size: 65536 [ 21.560653] ATOM BIOS: ATI [ 21.560677] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 21.560681] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 21.560703] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 21.560706] [drm] Driver supports precise vblank timestamp query. [ 21.560720] [drm] radeon: irq initialized. [ 21.560974] [drm] Detected VRAM RAM=128M, BAR=128M [ 21.560978] [drm] RAM width 128bits DDR [ 21.561079] [TTM] Zone kernel: Available graphics memory: 964468 kiB. [ 21.561082] [TTM] Initializing pool allocator. [ 21.561120] [drm] radeon: 128M of VRAM memory ready [ 21.561122] [drm] radeon: 512M of GTT memory ready. [ 21.561149] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 21.573396] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 21.581312] radeon 0000:01:05.0: WB enabled [ 21.581570] [drm] Loading RS690/RS740 Microcode [ 21.617903] radeon_cp: Failed to load firmware "radeon/RS690_cp.bin" [ 21.617947] [drm:r100_cp_init] *ERROR* Failed to load firmware! [ 21.617987] radeon 0000:01:05.0: failed initializing CP (-2). [ 21.618026] radeon 0000:01:05.0: Disabling GPU acceleration [ 21.618068] [drm] radeon: cp finalized [ 21.618832] failed to evaluate ATIF got AE_BAD_PARAMETER [ 21.619160] [drm] Radeon Display Connectors [ 21.619162] [drm] Connector 0: [ 21.619164] [drm] VGA [ 21.619167] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 21.619171] [drm] Encoders: [ 21.619173] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 21.619175] [drm] Connector 1: [ 21.619176] [drm] S-video [ 21.619178] [drm] Encoders: [ 21.619179] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 21.619181] [drm] Connector 2: [ 21.619183] [drm] HDMI-A [ 21.619184] [drm] HPD2 [ 21.619187] [drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c [ 21.619189] [drm] Encoders: [ 21.619191] [drm] DFP2: INTERNAL_DDI [ 21.619192] [drm] Connector 3: [ 21.619194] [drm] DVI-D [ 21.619196] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 21.619199] [drm] Encoders: [ 21.619200] [drm] DFP3: INTERNAL_LVTM1 [ 21.635282] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 21.676334] [drm] Radeon display connector VGA-1: Found valid EDID [ 21.696097] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.727893] Raw EDID: [ 21.727935] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.727973] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.728032] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.728070] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.728108] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.728146] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.728184] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.728221] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.728261] radeon 0000:01:05.0: HDMI-A-1: EDID block 0 invalid. [ 21.728264] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 21.740809] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID [ 21.903653] [drm] fb mappable at 0xF0040000 [ 21.903657] [drm] vram apper at 0xF0000000 [ 21.903659] [drm] size 5242880 [ 21.903660] [drm] fb depth is 24 [ 21.903662] [drm] pitch is 5120 [ 21.903793] fbcon: radeondrmfb (fb0) is primary device [ 21.927865] Console: switching to colour frame buffer device 160x64 [ 21.935600] fb0: radeondrmfb frame buffer device [ 21.935602] drm: registered panic notifier [ 21.935610] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:05.0 on minor 0 [ 22.336033] EXT3-fs (dm-1): using internal journal [ 22.771988] loop: module loaded [ 22.854280] kvm: Nested Virtualization enabled [ 23.691537] Adding 4194300k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194300k [ 34.165346] fuse init (API version 7.17) [ 34.253249] kjournald starting. Commit interval 5 seconds [ 34.357297] EXT3-fs (md0): using internal journal [ 34.357302] EXT3-fs (md0): mounted filesystem with ordered data mode [ 34.452066] kjournald starting. Commit interval 5 seconds [ 34.527813] EXT3-fs (dm-6): using internal journal [ 34.527820] EXT3-fs (dm-6): mounted filesystem with ordered data mode [ 34.709924] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 34.710474] SGI XFS Quota Management subsystem [ 34.762942] XFS (dm-7): Mounting Filesystem [ 35.100544] XFS (dm-7): Ending clean mount [ 35.121211] XFS (dm-8): Mounting Filesystem [ 35.264902] XFS (dm-8): Ending clean mount [ 35.378886] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal [ 35.378899] REISERFS (device dm-5): using ordered data mode [ 35.378902] reiserfs: using flush barriers [ 35.388589] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 35.390154] REISERFS (device dm-5): checking transaction log (dm-5) [ 35.442902] REISERFS (device dm-5): Using r5 hash to sort names [ 35.494813] kjournald starting. Commit interval 5 seconds [ 35.495335] EXT3-fs (dm-3): using internal journal [ 35.495343] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 35.527553] kjournald starting. Commit interval 5 seconds [ 35.527825] EXT3-fs (dm-4): using internal journal [ 35.527832] EXT3-fs (dm-4): mounted filesystem with ordered data mode [ 39.709177] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 (2 cpu cores) (version 2.20.00) [ 39.709231] powernow-k8: fid 0xd (2100 MHz), vid 0xe [ 39.709233] powernow-k8: fid 0xc (2000 MHz), vid 0xf [ 39.709236] powernow-k8: fid 0xa (1800 MHz), vid 0x11 [ 39.709238] powernow-k8: fid 0x2 (1000 MHz), vid 0x16 [ 64.693236] r8169 0000:02:00.0: eth0: link down [ 64.693258] r8169 0000:02:00.0: eth0: link down [ 64.694153] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.307173] r8169 0000:02:00.0: eth0: link up [ 66.308099] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 67.907861] ip_tables: (C) 2000-2006 Netfilter Core Team [ 68.401723] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 76.672026] eth0: no IPv6 routers present
Attachment:
signature.asc
Description: This is a digitally signed message part