Bug#650771: r8169 connectivity intermittent, link up messages in syslog
Here is the dmesg. This is with 2.6.39-bpo.2-amd64 and the r8169 driver as shipped by Debian.
On this boot, the card worked for a while, then stopped working. The dmesg features a few "link up" messages, as well as a watchdog message and a backtrace. The card was not working when I ran dmesg.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-bpo.2-amd64 (Debian 2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Tue Jul 26 10:35:23 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.39-bpo.2-amd64 root=/dev/mapper/vg--alpha-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M5A87, BIOS 0404 04/19/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ cff8d000-cff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 22fffe000-230000000
[ 0.000000] RAMDISK: 37d00000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb850 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 041911 XSDT1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 041911 FACP1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff90460 0CCC6 (v01 A1866 A1866001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0008C (v01 041911 APIC1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90420 0003C (v01 041911 OEMMCFG 20110419 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 041911 OEMB1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff9f8b0 00038 (v01 041911 OEMHPET 20110419 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f8f0 00898 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fff9000 - 000000022fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096922
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83840 r8192 d22656 u262144
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065557
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39-bpo.2-amd64 root=/dev/mapper/vg--alpha-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 3fa000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c4000000
[ 0.000000] Memory: 8126960k/9175040k available (3315k kernel code, 787352k absent, 260728k reserved, 3375k data, 596k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.923 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.84 BogoMIPS (lpj=9599692)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004083] Security Framework initialized
[ 0.004087] SELinux: Disabled at boot.
[ 0.004722] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007582] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009338] Mount-cache hash table entries: 256
[ 0.009463] Initializing cgroup subsys ns
[ 0.009466] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009469] Initializing cgroup subsys cpuacct
[ 0.009473] Initializing cgroup subsys memory
[ 0.009484] Initializing cgroup subsys devices
[ 0.009486] Initializing cgroup subsys freezer
[ 0.009488] Initializing cgroup subsys net_cls
[ 0.009492] Initializing cgroup subsys blkio
[ 0.009528] tseg: 0000000000
[ 0.009539] CPU: Physical Processor ID: 0
[ 0.009540] CPU: Processor Core ID: 0
[ 0.009542] mce: CPU supports 6 MCE banks
[ 0.009551] using C1E aware idle routine
[ 0.010253] ACPI: Core revision 20110316
[ 0.016057] Setting APIC routing to flat
[ 0.016313] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056223] CPU0: AMD Athlon(tm) II X4 610e Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 95000
[ 0.148025] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148043] System has AMD C1E enabled
[ 0.148043] Switch to broadcast mode on CPU1
[ 0.148118] #2
[ 0.148120] smpboot cpu 2: start_ip = 95000
[ 0.240033] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240052] Switch to broadcast mode on CPU2
[ 0.240127] #3
[ 0.240129] smpboot cpu 3: start_ip = 95000
[ 0.332045] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332064] Brought up 4 CPUs
[ 0.332067] Total of 4 processors activated (19199.67 BogoMIPS).
[ 0.332062] Switch to broadcast mode on CPU3
[ 0.332543] Switch to broadcast mode on CPU0
[ 0.332543] devtmpfs: initialized
[ 0.338645] PM: Registering ACPI NVS region at cffa8000 (163840 bytes)
[ 0.338645] print_constraints: dummy:
[ 0.338645] NET: Registered protocol family 16
[ 0.338645] node 0 link 0: io port [1000, ffffff]
[ 0.338645] TOM: 00000000d0000000 aka 3328M
[ 0.338645] Fam 10h mmconf [e0000000, efffffff]
[ 0.338645] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.338645] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.338645] node 0 link 0: mmio [a0000, bffff]
[ 0.338645] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.338645] TOM2: 0000000230000000 aka 8960M
[ 0.338645] bus: [00, 1f] on node 0 link 0
[ 0.338645] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.338645] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.338645] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.338645] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.338645] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.338645] Extended Config Space enabled on 1 nodes
[ 0.338645] ACPI: bus type pci registered
[ 0.338645] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.338645] PCI: not using MMCONFIG
[ 0.338645] PCI: Using configuration type 1 for base access
[ 0.338645] PCI: Using configuration type 1 for extended access
[ 0.338645] bio: create slab <bio-0> at 0
[ 0.340885] ACPI: EC: Look up EC in DSDT
[ 0.342005] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.452434] ACPI: Interpreter enabled
[ 0.452438] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.452462] ACPI: Using IOAPIC for interrupt routing
[ 0.452487] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.453340] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.481034] ACPI: No dock devices found.
[ 0.481036] HEST: Table not found.
[ 0.481040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.481253] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.481441] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.481444] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.481446] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.481449] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.481451] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.481454] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.481468] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.481505] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.481528] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.481531] pci 0000:00:02.0: PME# disabled
[ 0.481545] pci 0000:00:04.0: [1002:597a] type 1 class 0x000604
[ 0.481566] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.481568] pci 0000:00:04.0: PME# disabled
[ 0.481585] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.481606] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.481608] pci 0000:00:0a.0: PME# disabled
[ 0.481630] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.481645] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.481652] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.481660] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.481667] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.481675] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.481683] pci 0000:00:11.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.481719] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.481729] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.481782] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.481796] pci 0000:00:12.2: reg 10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.481847] pci 0000:00:12.2: supports D1 D2
[ 0.481849] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.481852] pci 0000:00:12.2: PME# disabled
[ 0.481871] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.481882] pci 0000:00:13.0: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.481934] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.481949] pci 0000:00:13.2: reg 10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.481999] pci 0000:00:13.2: supports D1 D2
[ 0.482001] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.482004] pci 0000:00:13.2: PME# disabled
[ 0.482022] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.482079] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.482096] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.482138] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.482141] pci 0000:00:14.2: PME# disabled
[ 0.482153] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.482210] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.482241] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.482252] pci 0000:00:14.5: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.482302] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.482312] pci 0000:00:16.0: reg 10: [mem 0xfe9f3000-0xfe9f3fff]
[ 0.482365] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.482380] pci 0000:00:16.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.482430] pci 0000:00:16.2: supports D1 D2
[ 0.482432] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.482435] pci 0000:00:16.2: PME# disabled
[ 0.482452] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.482466] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.482479] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.482492] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.482506] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.482550] pci 0000:01:00.0: [1002:68ba] type 0 class 0x000300
[ 0.482562] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.482571] pci 0000:01:00.0: reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
[ 0.482578] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.482590] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.482605] pci 0000:01:00.0: supports D1 D2
[ 0.482624] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.482636] pci 0000:01:00.1: reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
[ 0.482674] pci 0000:01:00.1: supports D1 D2
[ 0.488060] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.488066] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.488069] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.488073] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.488119] pci 0000:02:00.0: [1b21:1042] type 0 class 0x000c03
[ 0.488137] pci 0000:02:00.0: reg 10: [mem 0xfebf0000-0xfebf7fff 64bit]
[ 0.488208] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.488213] pci 0000:02:00.0: PME# disabled
[ 0.496060] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.496066] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.496069] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.496073] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.496116] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.496129] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.496149] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.496162] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.496198] pci 0000:03:00.0: supports D1 D2
[ 0.496200] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.496204] pci 0000:03:00.0: PME# disabled
[ 0.504066] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.504071] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.504074] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.504078] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.504131] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.504135] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.504139] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.504143] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.504146] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.504149] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.504151] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.504154] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.504157] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.504160] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.504176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.504440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.504477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.504517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.504558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.504761] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.504935] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.509917] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.509979] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.510040] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.510100] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15)
[ 0.510148] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.510185] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.510222] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.510258] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.510358] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.510362] vgaarb: loaded
[ 0.510393] PCI: Using ACPI for IRQ routing
[ 0.510395] PCI: pci_cache_line_size set to 64 bytes
[ 0.510464] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.510467] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.510565] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.510569] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.512068] Switching to clocksource hpet
[ 0.513437] pnp: PnP ACPI init
[ 0.513454] ACPI: bus type pnp registered
[ 0.513590] pnp 00:00: [bus 00-ff]
[ 0.513593] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.513595] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.513597] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.513600] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.513602] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.513604] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.513606] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.513661] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.513703] pnp 00:01: [dma 4]
[ 0.513705] pnp 00:01: [io 0x0000-0x000f]
[ 0.513707] pnp 00:01: [io 0x0081-0x0083]
[ 0.513709] pnp 00:01: [io 0x0087]
[ 0.513711] pnp 00:01: [io 0x0089-0x008b]
[ 0.513713] pnp 00:01: [io 0x008f]
[ 0.513715] pnp 00:01: [io 0x00c0-0x00df]
[ 0.513742] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.513752] pnp 00:02: [io 0x0070-0x0071]
[ 0.513761] pnp 00:02: [irq 8]
[ 0.513786] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.513794] pnp 00:03: [io 0x0061]
[ 0.513818] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.513828] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.513832] pnp 00:04: [irq 13]
[ 0.513857] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.514193] pnp 00:05: [io 0x0378-0x037f]
[ 0.514198] pnp 00:05: [irq 7]
[ 0.514200] pnp 00:05: [dma 0 disabled]
[ 0.514327] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.514381] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.514383] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.514385] pnp 00:06: [io 0x0290-0x029f]
[ 0.514444] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.514447] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514488] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.514514] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.514790] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.514794] pnp 00:08: [irq 4]
[ 0.514796] pnp 00:08: [dma 0 disabled]
[ 0.514882] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.514965] pnp 00:09: [io 0x0060]
[ 0.514967] pnp 00:09: [io 0x0064]
[ 0.514969] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.514971] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.515016] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.515019] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.515022] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.515178] pnp 00:0a: [io 0x0010-0x001f]
[ 0.515181] pnp 00:0a: [io 0x0022-0x003f]
[ 0.515183] pnp 00:0a: [io 0x0062-0x0063]
[ 0.515185] pnp 00:0a: [io 0x0065-0x006f]
[ 0.515187] pnp 00:0a: [io 0x0072-0x007f]
[ 0.515189] pnp 00:0a: [io 0x0080]
[ 0.515191] pnp 00:0a: [io 0x0084-0x0086]
[ 0.515193] pnp 00:0a: [io 0x0088]
[ 0.515194] pnp 00:0a: [io 0x008c-0x008e]
[ 0.515196] pnp 00:0a: [io 0x0090-0x009f]
[ 0.515198] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.515200] pnp 00:0a: [io 0x00b1]
[ 0.515202] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.515204] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.515206] pnp 00:0a: [io 0x040b]
[ 0.515208] pnp 00:0a: [io 0x04d6]
[ 0.515211] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.515213] pnp 00:0a: [io 0x0c14]
[ 0.515215] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.515217] pnp 00:0a: [io 0x0c52]
[ 0.515219] pnp 00:0a: [io 0x0c6c]
[ 0.515221] pnp 00:0a: [io 0x0c6f]
[ 0.515223] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.515225] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.515227] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.515229] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.515231] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.515233] pnp 00:0a: [io 0x0b00-0x0b3f]
[ 0.515235] pnp 00:0a: [io 0x0800-0x089f]
[ 0.515237] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.515239] pnp 00:0a: [io 0x0b00-0x0b1f]
[ 0.515241] pnp 00:0a: [io 0x0b20-0x0b3f]
[ 0.515243] pnp 00:0a: [io 0x0900-0x090f]
[ 0.515245] pnp 00:0a: [io 0x0910-0x091f]
[ 0.515248] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.515250] pnp 00:0a: [io 0x0060]
[ 0.515252] pnp 00:0a: [io 0x0064]
[ 0.515254] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.515257] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.515259] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[ 0.515261] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.515263] pnp 00:0a: [mem 0xfed80000-0xfed80fff]
[ 0.515266] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.515345] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.515348] system 00:0a: [io 0x040b] has been reserved
[ 0.515350] system 00:0a: [io 0x04d6] has been reserved
[ 0.515353] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.515356] system 00:0a: [io 0x0c14] has been reserved
[ 0.515358] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.515361] system 00:0a: [io 0x0c52] has been reserved
[ 0.515364] system 00:0a: [io 0x0c6c] has been reserved
[ 0.515366] system 00:0a: [io 0x0c6f] has been reserved
[ 0.515369] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.515371] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.515374] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.515377] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.515380] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.515383] system 00:0a: [io 0x0b00-0x0b3f] has been reserved
[ 0.515386] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.515388] system 00:0a: [io 0x0b00-0x0b1f] has been reserved
[ 0.515391] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.515394] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.515397] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.515400] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.515403] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.515406] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.515409] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.515412] system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.515415] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.515449] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.515425] Switched to NOHz mode on CPU #3
[ 0.515449] Switched to NOHz mode on CPU #0
[ 0.515435] Switched to NOHz mode on CPU #2
[ 0.515440] Switched to NOHz mode on CPU #1
[ 0.515466] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.515469] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.515579] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.515581] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.515584] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.515586] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.515589] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.515635] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.515638] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.515641] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.515644] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.515647] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.515649] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.515741] pnp: PnP ACPI: found 13 devices
[ 0.515743] ACPI: ACPI bus type pnp unregistered
[ 0.521755] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.521758] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.521761] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.521765] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.521768] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.521770] pci 0000:00:04.0: bridge window [io disabled]
[ 0.521773] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.521776] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 0.521779] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.521782] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.521784] pci 0000:00:0a.0: bridge window [mem disabled]
[ 0.521787] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.521791] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.521793] pci 0000:00:14.4: bridge window [io disabled]
[ 0.521797] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.521801] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.521820] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.521824] pci 0000:00:02.0: setting latency timer to 64
[ 0.521832] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.521834] pci 0000:00:04.0: setting latency timer to 64
[ 0.521839] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.521842] pci 0000:00:0a.0: setting latency timer to 64
[ 0.521848] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.521851] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.521853] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.521855] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.521857] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.521860] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.521862] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.521864] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.521867] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.521869] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.521872] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.521874] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.521877] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.521879] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.521881] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.521883] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.521886] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.521888] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.521997] NET: Registered protocol family 2
[ 0.522243] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.523743] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.526607] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.526962] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.526964] TCP reno registered
[ 0.526983] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.527050] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.527311] NET: Registered protocol family 1
[ 1.384152] pci 0000:01:00.0: Boot video device
[ 1.384185] PCI: CLS 64 bytes, default 64
[ 1.384231] Unpacking initramfs...
[ 1.443353] Freeing initrd memory: 3008k freed
[ 1.445563] PCI-DMA: Disabling AGP.
[ 1.445673] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 1.445675] PCI-DMA: using GART IOMMU.
[ 1.445678] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.449421] audit: initializing netlink socket (disabled)
[ 1.449437] type=2000 audit(1322852937.444:1): initialized
[ 1.460672] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.461726] VFS: Disk quotas dquot_6.5.2
[ 1.461781] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.461852] msgmni has been set to 16007
[ 1.462196] alg: No test for stdrng (krng)
[ 1.462276] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.462280] io scheduler noop registered
[ 1.462282] io scheduler deadline registered
[ 1.462312] io scheduler cfq registered (default)
[ 1.462496] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.462526] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.462744] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.462777] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 1.462993] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.463025] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.463179] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.463182] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.463185] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.463188] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.463201] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 1.463204] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.463206] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 1.463219] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.463222] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.463224] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.463311] ERST: Table is not found!
[ 1.463380] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.483737] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.556694] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.564370] Linux agpgart interface v0.103
[ 1.564470] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.567338] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.567348] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.567517] mousedev: PS/2 mouse device common for all mice
[ 1.567559] rtc_cmos 00:02: RTC can wake from S4
[ 1.567730] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.567753] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.567769] cpuidle: using governor ladder
[ 1.567771] cpuidle: using governor menu
[ 1.568055] TCP cubic registered
[ 1.568131] NET: Registered protocol family 10
[ 1.568734] Mobile IPv6
[ 1.568736] NET: Registered protocol family 17
[ 1.568740] Registering the dns_resolver key type
[ 1.568852] PM: Hibernation image not present or could not be loaded.
[ 1.568862] registered taskstats version 1
[ 1.569517] rtc_cmos 00:02: setting system clock to 2011-12-02 19:08:58 UTC (1322852938)
[ 1.569545] Initializing network drop monitor service
[ 1.570611] Freeing unused kernel memory: 596k freed
[ 1.570773] Write protecting the kernel read-only data: 6144k
[ 1.573928] Freeing unused kernel memory: 764k freed
[ 1.577362] Freeing unused kernel memory: 788k freed
[ 1.594251] udev[84]: starting version 164
[ 1.627265] SCSI subsystem initialized
[ 1.640909] libata version 3.00 loaded.
[ 1.646677] ahci 0000:00:11.0: version 3.0
[ 1.646702] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.646823] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.646826] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.647709] scsi0 : ahci
[ 1.647945] scsi1 : ahci
[ 1.648248] scsi2 : ahci
[ 1.648411] scsi3 : ahci
[ 1.648580] scsi4 : ahci
[ 1.648761] scsi5 : ahci
[ 1.648849] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 19
[ 1.648852] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 19
[ 1.648855] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 19
[ 1.648858] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 19
[ 1.648861] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 19
[ 1.648864] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 19
[ 1.972098] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.972137] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.972165] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.140159] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.140182] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.140533] ata1.00: ATA-9: M4-CT128M4SSD2, 0002, max UDMA/100
[ 2.140536] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.140870] ata2.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[ 2.140873] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.140963] ata1.00: configured for UDMA/100
[ 2.141170] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0002 PQ: 0 ANSI: 5
[ 2.141674] ata2.00: configured for UDMA/133
[ 2.141787] scsi 1:0:0:0: Direct-Access ATA ST1000DL002-9TT1 CC32 PQ: 0 ANSI: 5
[ 2.144104] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.144410] ata4.00: ATAPI: ATAPI iHAS124 B, AL0R, max UDMA/100
[ 2.145217] ata4.00: configured for UDMA/100
[ 2.148424] scsi 3:0:0:0: CD-ROM ATAPI iHAS124 B AL0R PQ: 0 ANSI: 5
[ 2.155724] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.155729] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.155773] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.155781] sd 0:0:0:0: [sda] Write Protect is off
[ 2.155784] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.155782] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.155850] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.155861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.156535] sda: sda1 sda2
[ 2.157018] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.231394] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 2.232235] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.448111] Refined TSC clocksource calibration: 2399.960 MHz.
[ 2.448118] Switching to clocksource tsc
[ 2.778090] device-mapper: uevent: version 1.0.3
[ 2.778167] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.978866] PM: Starting manual resume from disk
[ 2.978870] PM: Hibernation image partition 254:1 present
[ 2.978871] PM: Looking for hibernation image.
[ 2.995369] PM: Image not found (code -22)
[ 2.995372] PM: Hibernation image not present or could not be loaded.
[ 3.012427] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 3.012430] EXT4-fs (dm-0): write access will be enabled during recovery
[ 3.027208] EXT4-fs (dm-0): recovery complete
[ 3.027331] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.201992] udev[364]: starting version 164
[ 3.250657] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.250666] ACPI: Power Button [PWRB]
[ 3.250727] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.250731] ACPI: Power Button [PWRF]
[ 3.256212] ACPI: acpi_idle registered with cpuidle
[ 3.283388] ACPI: processor limited to max C-state 1
[ 3.287428] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.288117] wmi: Mapper loaded
[ 3.292887] MCE: In-kernel MCE decoding enabled.
[ 3.301490] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.301519] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.301568] r8169 0000:03:00.0: setting latency timer to 64
[ 3.301575] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
[ 3.301631] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 3.302146] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc900117c6000, f4:6d:04:d3:08:de, XID 0c900800 IRQ 43
[ 3.304770] usbcore: registered new interface driver usbfs
[ 3.306942] usbcore: registered new interface driver hub
[ 3.306978] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.307346] usbcore: registered new device driver usb
[ 3.322822] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.322869] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 3.335290] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.336411] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.336416] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.336546] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.349930] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.349989] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.350028] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.350251] [drm] Initialized drm 1.1.0 20060810
[ 3.364472] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.364502] QUIRK: Enable AMD PLL fix
[ 3.364513] ehci_hcd 0000:00:12.2: debug port 1
[ 3.364540] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 3.372599] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.372645] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 3.372650] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.372669] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 3.376393] EDAC MC: Ver: 2.1.0 Jul 26 2011
[ 3.376502] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.376553] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.376556] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.376558] usb usb1: Product: EHCI Host Controller
[ 3.376560] usb usb1: Manufacturer: Linux 2.6.39-bpo.2-amd64 ehci_hcd
[ 3.376562] usb usb1: SerialNumber: 0000:00:12.2
[ 3.376696] hub 1-0:1.0: USB hub found
[ 3.376700] hub 1-0:1.0: 5 ports detected
[ 3.376937] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.376984] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.376996] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.379326] AMD64 EDAC driver v3.4.0
[ 3.393830] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfebf0000
[ 3.393900] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 3.393906] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 3.393913] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 3.393918] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 3.393922] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 3.393988] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.393991] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.393993] usb usb2: Product: xHCI Host Controller
[ 3.393995] usb usb2: Manufacturer: Linux 2.6.39-bpo.2-amd64 xhci_hcd
[ 3.393997] usb usb2: SerialNumber: 0000:02:00.0
[ 3.394156] xHCI xhci_add_endpoint called for root hub
[ 3.394158] xHCI xhci_check_bandwidth called for root hub
[ 3.394194] hub 2-0:1.0: USB hub found
[ 3.394201] hub 2-0:1.0: 2 ports detected
[ 3.394261] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.394268] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 3.396071] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.396098] ehci_hcd 0000:00:13.2: debug port 1
[ 3.396112] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe9ff400
[ 3.398343] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.398450] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.398987] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.400274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.408019] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.408050] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.408053] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.408055] usb usb3: Product: EHCI Host Controller
[ 3.408057] usb usb3: Manufacturer: Linux 2.6.39-bpo.2-amd64 ehci_hcd
[ 3.408059] usb usb3: SerialNumber: 0000:00:13.2
[ 3.408214] hub 3-0:1.0: USB hub found
[ 3.408218] hub 3-0:1.0: 5 ports detected
[ 3.408375] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.408408] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 3.408423] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 3.412344] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.412348] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.412350] usb usb4: Product: xHCI Host Controller
[ 3.412352] usb usb4: Manufacturer: Linux 2.6.39-bpo.2-amd64 xhci_hcd
[ 3.412354] usb usb4: SerialNumber: 0000:02:00.0
[ 3.412459] xHCI xhci_add_endpoint called for root hub
[ 3.412462] xHCI xhci_check_bandwidth called for root hub
[ 3.412488] hub 4-0:1.0: USB hub found
[ 3.412494] hub 4-0:1.0: 2 ports detected
[ 3.416506] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.428053] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.428085] ehci_hcd 0000:00:16.2: debug port 1
[ 3.428100] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe9ff000
[ 3.428236] [drm] radeon kernel modesetting enabled.
[ 3.428388] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.428394] radeon 0000:01:00.0: setting latency timer to 64
[ 3.428565] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA).
[ 3.428596] [drm] register mmio base: 0xFEAE0000
[ 3.428598] [drm] register mmio size: 131072
[ 3.433114] ATOM BIOS: GV
[ 3.433139] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.433143] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 3.433383] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.433387] [drm] RAM width 128bits DDR
[ 3.433463] [TTM] Zone kernel: Available graphics memory: 4099034 kiB.
[ 3.433465] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 3.433467] [TTM] Initializing pool allocator.
[ 3.433499] [drm] radeon: 1024M of VRAM memory ready
[ 3.433501] [drm] radeon: 512M of GTT memory ready.
[ 3.433517] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.433519] [drm] Driver supports precise vblank timestamp query.
[ 3.433556] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[ 3.433561] radeon 0000:01:00.0: radeon: using MSI.
[ 3.433589] [drm] radeon: irq initialized.
[ 3.433594] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.434692] [drm] Loading JUNIPER Microcode
[ 3.440047] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.440083] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.440085] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.440088] usb usb5: Product: EHCI Host Controller
[ 3.440090] usb usb5: Manufacturer: Linux 2.6.39-bpo.2-amd64 ehci_hcd
[ 3.440092] usb usb5: SerialNumber: 0000:00:16.2
[ 3.440245] hub 5-0:1.0: USB hub found
[ 3.440249] hub 5-0:1.0: 4 ports detected
[ 3.440690] EDAC amd64: DRAM ECC enabled.
[ 3.440700] EDAC amd64: F10h detected (node 0).
[ 3.440720] EDAC MC: DCT0 chip selects:
[ 3.440722] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 3.440724] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 3.440726] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 3.440727] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 3.440729] EDAC MC: DCT1 chip selects:
[ 3.440731] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 3.440733] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 3.440735] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 3.440737] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 3.440738] EDAC amd64: using x4 syndromes.
[ 3.440740] EDAC amd64: MCT channel count: 1
[ 3.440766] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
[ 3.441160] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 3.442110] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.442159] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.442182] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 3.451457] radeon 0000:01:00.0: WB enabled
[ 3.467543] [drm] ring test succeeded in 1 usecs
[ 3.467653] [drm] radeon: ib pool ready.
[ 3.467711] [drm] ib test succeeded in 0 usecs
[ 3.467717] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 3.468087] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe9fe000
[ 3.468227] [drm] Radeon Display Connectors
[ 3.468229] [drm] Connector 0:
[ 3.468230] [drm] DisplayPort
[ 3.468231] [drm] HPD4
[ 3.468233] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 3.468235] [drm] Encoders:
[ 3.468237] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.468238] [drm] Connector 1:
[ 3.468240] [drm] HDMI-A
[ 3.468241] [drm] HPD5
[ 3.468243] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.468245] [drm] Encoders:
[ 3.468246] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.468247] [drm] Connector 2:
[ 3.468249] [drm] DVI-I
[ 3.468250] [drm] HPD1
[ 3.468252] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 3.468253] [drm] Encoders:
[ 3.468255] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.468256] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 3.468258] [drm] Connector 3:
[ 3.468259] [drm] DVI-I
[ 3.468260] [drm] HPD6
[ 3.468262] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 3.468264] [drm] Encoders:
[ 3.468265] [drm] DFP4: INTERNAL_UNIPHY
[ 3.468267] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.532013] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.532016] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.532018] usb usb6: Product: OHCI Host Controller
[ 3.532021] usb usb6: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 3.532023] usb usb6: SerialNumber: 0000:00:12.0
[ 3.532160] hub 6-0:1.0: USB hub found
[ 3.532166] hub 6-0:1.0: 5 ports detected
[ 3.544043] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.544086] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.544097] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 3.564025] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fd000
[ 3.627994] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.628022] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.628024] usb usb7: Product: OHCI Host Controller
[ 3.628026] usb usb7: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 3.628028] usb usb7: SerialNumber: 0000:00:13.0
[ 3.628116] hub 7-0:1.0: USB hub found
[ 3.628122] hub 7-0:1.0: 5 ports detected
[ 3.636037] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.676711] hda_codec: ALC887-VD: BIOS auto-probing.
[ 3.681239] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 3.688065] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.688100] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.688113] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 3.696075] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 3.708046] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fc000
[ 3.768012] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.768014] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.768020] usb usb8: Product: OHCI Host Controller
[ 3.768022] usb usb8: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 3.768024] usb usb8: SerialNumber: 0000:00:14.5
[ 3.768126] hub 8-0:1.0: USB hub found
[ 3.768131] hub 8-0:1.0: 2 ports detected
[ 3.780022] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.780036] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.780044] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 3.816032] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe9f3000
[ 3.830019] usb 1-1: New USB device found, idVendor=04a9, idProduct=1909
[ 3.830023] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.830026] usb 1-1: Product: CanoScan
[ 3.830027] usb 1-1: Manufacturer: Canon
[ 3.876034] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.876037] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.876039] usb usb9: Product: OHCI Host Controller
[ 3.876041] usb usb9: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 3.876043] usb usb9: SerialNumber: 0000:00:16.0
[ 3.876133] hub 9-0:1.0: USB hub found
[ 3.876138] hub 9-0:1.0: 4 ports detected
[ 4.024602] [drm] Internal thermal controller with fan control
[ 4.024650] [drm] radeon: power management initialized
[ 4.109511] [drm] fb mappable at 0xD0141000
[ 4.109514] [drm] vram apper at 0xD0000000
[ 4.109515] [drm] size 8294400
[ 4.109517] [drm] fb depth is 24
[ 4.109518] [drm] pitch is 7680
[ 4.109596] fbcon: radeondrmfb (fb0) is primary device
[ 4.316088] usb 6-2: new full speed USB device number 2 using ohci_hcd
[ 4.322980] Console: switching to colour frame buffer device 240x67
[ 4.329708] fb0: radeondrmfb frame buffer device
[ 4.329709] drm: registered panic notifier
[ 4.329719] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 4.329983] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.330071] HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X
[ 4.330098] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.507071] usb 6-2: New USB device found, idVendor=0764, idProduct=0501
[ 4.507075] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.507078] usb 6-2: Product: CRDA103.981
[ 4.507080] usb 6-2: Manufacturer: CP850PFCLCD
[ 4.507082] usb 6-2: SerialNumber: CPS
[ 4.556213] generic-usb 0003:0764:0501.0001: hiddev0,hidraw0: USB HID v1.10 Device [CP850PFCLCD CRDA103.981] on usb-0000:00:12.0-2/input0
[ 4.556234] usbcore: registered new interface driver usbhid
[ 4.556236] usbhid: USB HID core driver
[ 4.601322] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 4.624936] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 4.642847] loop: module loaded
[ 4.651698] powernow-k8: Found 1 AMD Athlon(tm) II X4 610e Processor (4 cpu cores) (version 2.20.00)
[ 4.651762] powernow-k8: 0 : pstate 0 (2400 MHz)
[ 4.651764] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 4.651766] powernow-k8: 2 : pstate 2 (1700 MHz)
[ 4.651768] powernow-k8: 3 : pstate 3 (800 MHz)
[ 4.776148] usb 6-5: new low speed USB device number 3 using ohci_hcd
[ 4.957055] usb 6-5: New USB device found, idVendor=045e, idProduct=0780
[ 4.957065] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.957073] usb 6-5: Product: Comfort Curve Keyboard 3000
[ 4.957079] usb 6-5: Manufacturer: Microsoft
[ 4.986253] Adding 16777212k swap on /dev/mapper/vg--linux-swap. Priority:-1 extents:1 across:16777212k
[ 4.988361] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input4
[ 4.988586] generic-usb 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input0
[ 4.999457] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/input/input5
[ 4.999666] generic-usb 0003:045E:0780.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input1
[ 5.099629] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.115083] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.288159] usb 7-1: new low speed USB device number 2 using ohci_hcd
[ 5.412694] r8169 0000:03:00.0: eth0: link down
[ 5.412706] r8169 0000:03:00.0: eth0: link down
[ 5.415225] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.457062] usb 7-1: New USB device found, idVendor=045e, idProduct=077b
[ 5.457072] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.457080] usb 7-1: Product: Comfort Mouse 3000
[ 5.457085] usb 7-1: Manufacturer: Microsoft
[ 5.472549] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input6
[ 5.472835] generic-usb 0003:045E:077B.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:13.0-1/input0
[ 5.701719] lp0: using parport0 (interrupt-driven).
[ 5.706453] ppdev: user-space parallel port driver
[ 6.054130] sshd (1198): /proc/1198/oom_adj is deprecated, please use /proc/1198/oom_score_adj instead.
[ 8.184573] r8169 0000:03:00.0: eth0: link up
[ 8.187052] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.288071] eth0: no IPv6 routers present
[ 380.800084] ------------[ cut here ]------------
[ 380.800102] WARNING: at /tmp/buildd/linux-2.6-2.6.39/debian/build/source_amd64_none/net/sched/sch_generic.c:256 dev_watchdog+0x104/0x1ad()
[ 380.800111] Hardware name: System Product Name
[ 380.800117] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[ 380.800122] Modules linked in: ppdev lp joydev powernow_k8 mperf loop usbhid hid snd_hda_codec_hdmi snd_hda_codec_realtek radeon snd_hda_intel snd_hda_codec ohci_hcd snd_hwdep sg ttm drm_kms_helper snd_pcm amd64_edac_mod edac_core xhci_hcd tpm_tis snd_timer tpm evdev drm ehci_hcd sr_mod i2c_algo_bit snd cdrom psmouse parport_pc asus_atk0110 k10temp i2c_piix4 i2c_core tpm_bios usbcore edac_mce_amd serio_raw pcspkr parport r8169 mii soundcore wmi snd_page_alloc power_supply processor button thermal_sys ext4 mbcache jbd2 crc16 dm_mod sd_mod crc_t10dif ahci libahci libata scsi_mod
[ 380.800217] Pid: 0, comm: kworker/0:1 Not tainted 2.6.39-bpo.2-amd64 #1
[ 380.800223] Call Trace:
[ 380.800227] <IRQ> [<ffffffff810458e4>] ? warn_slowpath_common+0x78/0x8c
[ 380.800249] [<ffffffff81045996>] ? warn_slowpath_fmt+0x45/0x4a
[ 380.800258] [<ffffffff8129143c>] ? netif_tx_lock+0x43/0x74
[ 380.800266] [<ffffffff81291571>] ? dev_watchdog+0x104/0x1ad
[ 380.800275] [<ffffffff8105a708>] ? __queue_work+0x30c/0x334
[ 380.800284] [<ffffffff8100e0ca>] ? read_tsc+0x5/0x16
[ 380.800294] [<ffffffff810661a7>] ? timekeeping_get_ns+0xe/0x2e
[ 380.800303] [<ffffffff81051ca4>] ? run_timer_softirq+0x1c2/0x28e
[ 380.800311] [<ffffffff8129146d>] ? netif_tx_lock+0x74/0x74
[ 380.800320] [<ffffffff8104b4ff>] ? __do_softirq+0xc3/0x19e
[ 380.800329] [<ffffffff81090e58>] ? handle_irq_event_percpu+0x171/0x18f
[ 380.800339] [<ffffffff8133a59c>] ? call_softirq+0x1c/0x30
[ 380.800347] [<ffffffff8100aa6f>] ? do_softirq+0x3f/0x79
[ 380.800355] [<ffffffff8104b2de>] ? irq_exit+0x3f/0xa0
[ 380.800362] [<ffffffff8100a3bb>] ? do_IRQ+0x94/0xaa
[ 380.800371] [<ffffffff81333253>] ? common_interrupt+0x13/0x13
[ 380.800376] <EOI> [<ffffffff81026800>] ? native_safe_halt+0x2/0x3
[ 380.800392] [<ffffffff8100f6f5>] ? default_idle+0x4b/0x85
[ 380.800401] [<ffffffff8100f806>] ? c1e_idle+0xd7/0xfd
[ 380.800408] [<ffffffff81008dbd>] ? cpu_idle+0xab/0xe1
[ 380.800418] [<ffffffff8132ba00>] ? start_secondary+0x1db/0x1e1
[ 380.800425] ---[ end trace 2abad3a7faf5fbb5 ]---
[ 380.816237] r8169 0000:03:00.0: eth0: link up
Reply to: