Bug#650771: linux-image-2.6.39-bpo.2-amd64: r8169 connectivity intermittent, link up messages in syslog
Package: linux-2.6
Version: 2.6.39-3~bpo60+1
Severity: important
As far as I can tell, there have been problems with Linux support for the Realtek 8168 for a number of years now. There are reports at least as far
back as 2010, for both amd64 and i386 systems, on various Linux distributions.
The general symptoms are that the network card may work for a while, then stops working for up to several minutes, works again for a while, and so on.
Here are some more things I have been able to gather from various bug reports that are already out there:
- The problem affects at least the Realtek 8168 series, with various revisions, at least B through E.
- lspci reports them all as Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller, regardless of the actual revision
- There are at least two Linux drivers for these cards:
1. The r8169 driver included in vanilla Linux and various distribution kernels
2. The r8168 driver which can be downloaded from Realtek's website
- Various fixes have been suggested. Other reports of this bug have been marked as fixed. With every fix out there, there are at least some people
for whom it doesn't solve the problem.
* Some people report that using the r8168 driver instead of the r8169 driver solves the problem. For others, this reduces the frequency of the
network going down, but doesn't completely make it go away. My system ran fine with r8168 for a few days, then started having problems again,
accompanied by backtraces in syslog mentioning WATCHDOG.
* Some people report that setting the network speed to 100 Mbps instead of 1000 Mbps solves the problem for them. Other people report that this
merely reduces the probability of the problem occurring, but doesn't eliminate it.
* Some reports claim that reducing the size of the transmit buffer solves the issue. Others claim it doesn't solve the problem, at most
makes it occur less frequently.
* Some people report that passing pcie_aspm=off to the kernel solves the problem for them. Others report that this does not help for them.
It did not help for me.
* Some reports mention that heavy network traffic seems to trigger the issue.
* Some people report that upgrading their BIOS solved the issue. Others report that they tried that and it didn't help.
* At various points in time, this has been marked fixed in some kernel version, only to be reported again against the same or later
kernel versions.
- To me, the various reports suggest that there may be a race condition somewhere.
- As far as I know, the same hardware works without problems under other operating systems (e.g. Windows 7), and also on older (2008?) versions
of Linux.
- I have the impression that the problem is more frequent on some boots than others: at times, I have been able to use the network card for hours
without problems, even while downloading megabytes of files from the Internet. At other times, it will fail after just a few ICMP echo messages.
- I would like to emphasize that this problem affects not just this kernel version, not just Debian kernels, and affects the r8169 driver as well
as the r8168 driver that is avalaible from Realtek's website.
How to reproduce:
- On an affected system (Realtek 8168, Gigabit ethernet; other NICs and network speeds may or may not be affected), use the network. Check the
syslog for "link up" messages. Leaving ping running will show a number of messages getting through, then silence for up to several minutes,
then messages getting through again, etc.
-- Package-specific info:
** Version:
Linux version 2.6.39-bpo.2-amd64 (Debian 2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Tue Jul 26 10:35:23 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.39-bpo.2-amd64 root=/dev/mapper/vg--alpha-root ro quiet
** Not tainted
** Kernel log:
[ 3.516053] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.516061] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 3.524067] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 3.556030] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fc000
[ 3.616024] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.616027] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.616029] usb usb8: Product: OHCI Host Controller
[ 3.616031] usb usb8: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 3.616033] usb usb8: SerialNumber: 0000:00:14.5
[ 3.616111] hub 8-0:1.0: USB hub found
[ 3.616117] hub 8-0:1.0: 2 ports detected
[ 3.624081] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.624092] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.624104] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 3.652030] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe9f3000
[ 3.658032] usb 1-1: New USB device found, idVendor=04a9, idProduct=1909
[ 3.658035] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.658038] usb 1-1: Product: CanoScan
[ 3.658040] usb 1-1: Manufacturer: Canon
[ 3.712017] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.712020] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.712022] usb usb9: Product: OHCI Host Controller
[ 3.712024] usb usb9: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 3.712026] usb usb9: SerialNumber: 0000:00:16.0
[ 3.712119] hub 9-0:1.0: USB hub found
[ 3.712124] hub 9-0:1.0: 4 ports detected
[ 3.840622] [drm] Internal thermal controller with fan control
[ 3.840670] [drm] radeon: power management initialized
[ 3.917589] [drm] fb mappable at 0xD0141000
[ 3.917591] [drm] vram apper at 0xD0000000
[ 3.917593] [drm] size 8294400
[ 3.917594] [drm] fb depth is 24
[ 3.917595] [drm] pitch is 7680
[ 3.917675] fbcon: radeondrmfb (fb0) is primary device
[ 4.130970] Console: switching to colour frame buffer device 240x67
[ 4.137698] fb0: radeondrmfb frame buffer device
[ 4.137700] drm: registered panic notifier
[ 4.137710] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 4.137966] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.138057] HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X
[ 4.138092] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.148094] usb 6-2: new full speed USB device number 2 using ohci_hcd
[ 4.327080] usb 6-2: New USB device found, idVendor=0764, idProduct=0501
[ 4.327084] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.327087] usb 6-2: Product: CRDA103.981
[ 4.327088] usb 6-2: Manufacturer: CP850PFCLCD
[ 4.327090] usb 6-2: SerialNumber: CPS
[ 4.376234] generic-usb 0003:0764:0501.0001: hiddev0,hidraw0: USB HID v1.10 Device [CP850PFCLCD CRDA103.981] on usb-0000:00:12.0-2/input0
[ 4.376254] usbcore: registered new interface driver usbhid
[ 4.376256] usbhid: USB HID core driver
[ 4.538048] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 4.561618] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 4.581092] loop: module loaded
[ 4.589814] powernow-k8: Found 1 AMD Athlon(tm) II X4 610e Processor (4 cpu cores) (version 2.20.00)
[ 4.589881] powernow-k8: 0 : pstate 0 (2400 MHz)
[ 4.589884] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 4.589886] powernow-k8: 2 : pstate 2 (1700 MHz)
[ 4.589887] powernow-k8: 3 : pstate 3 (800 MHz)
[ 4.624161] usb 6-5: new low speed USB device number 3 using ohci_hcd
[ 4.801095] usb 6-5: New USB device found, idVendor=045e, idProduct=0780
[ 4.801105] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.801113] usb 6-5: Product: Comfort Curve Keyboard 3000
[ 4.801119] usb 6-5: Manufacturer: Microsoft
[ 4.832377] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input4
[ 4.832606] generic-usb 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input0
[ 4.843206] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/input/input5
[ 4.843304] generic-usb 0003:045E:0780.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input1
[ 4.891693] Adding 16777212k swap on /dev/mapper/vg--linux-swap. Priority:-1 extents:1 across:16777212k
[ 5.003916] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.019297] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.104127] usb 7-1: new low speed USB device number 2 using ohci_hcd
[ 5.240730] r8169 0000:03:00.0: eth0: link down
[ 5.240744] r8169 0000:03:00.0: eth0: link down
[ 5.243333] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.277049] usb 7-1: New USB device found, idVendor=045e, idProduct=077b
[ 5.277060] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.277068] usb 7-1: Product: Comfort Mouse 3000
[ 5.277073] usb 7-1: Manufacturer: Microsoft
[ 5.292514] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input6
[ 5.292803] generic-usb 0003:045E:077B.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:13.0-1/input0
[ 5.625093] lp0: using parport0 (interrupt-driven).
[ 5.628592] ppdev: user-space parallel port driver
[ 5.978061] sshd (1192): /proc/1192/oom_adj is deprecated, please use /proc/1192/oom_score_adj instead.
[ 8.229255] r8169 0000:03:00.0: eth0: link up
[ 8.231735] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.000078] eth0: no IPv6 routers present
[ 55.320187] r8169 0000:03:00.0: eth0: link up
[ 56.708188] r8169 0000:03:00.0: eth0: link up
[ 57.896194] r8169 0000:03:00.0: eth0: link up
[ 59.528182] r8169 0000:03:00.0: eth0: link up
[ 62.492181] r8169 0000:03:00.0: eth0: link up
[ 64.152182] r8169 0000:03:00.0: eth0: link up
[ 65.568168] r8169 0000:03:00.0: eth0: link up
[ 67.048172] r8169 0000:03:00.0: eth0: link up
[ 67.640180] r8169 0000:03:00.0: eth0: link up
[ 69.256187] r8169 0000:03:00.0: eth0: link up
[ 72.700195] r8169 0000:03:00.0: eth0: link up
[ 75.088195] r8169 0000:03:00.0: eth0: link up
[ 77.512184] r8169 0000:03:00.0: eth0: link up
[ 82.744188] r8169 0000:03:00.0: eth0: link up
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0404
board_vendor: ASUSTeK Computer INC.
board_name: M5A87
board_version: Rev X.0x
** Loaded modules:
Module Size Used by
ppdev 12725 0
lp 17190 0
joydev 17138 0
powernow_k8 17321 1
mperf 12411 1 powernow_k8
loop 22479 0
usbhid 39946 0
hid 72745 1 usbhid
snd_hda_codec_hdmi 22174 1
snd_hda_codec_realtek 283734 1
ohci_hcd 26362 0
snd_hda_intel 25946 0
snd_hda_codec 67865 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
radeon 743013 2
psmouse 55199 0
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67276 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 22658 1 snd_pcm
snd 52324 7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
amd64_edac_mod 21998 0
ttm 52224 1 radeon
xhci_hcd 59382 0
drm_kms_helper 26950 1 radeon
drm 166500 3 radeon,ttm,drm_kms_helper
sg 25769 0
i2c_algo_bit 12834 1 radeon
parport_pc 22191 1
sr_mod 21824 0
asus_atk0110 17276 0
ehci_hcd 39487 0
i2c_piix4 12536 0
i2c_core 23766 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
soundcore 13014 1 snd
tpm_tis 13125 0
edac_core 35344 3 amd64_edac_mod
tpm 17756 1 tpm_tis
edac_mce_amd 17103 1 amd64_edac_mod
evdev 17475 10
tpm_bios 12903 1 tpm
serio_raw 12878 0
pcspkr 12579 0
usbcore 127203 5 usbhid,ohci_hcd,xhci_hcd,ehci_hcd
parport 31650 3 ppdev,lp,parport_pc
cdrom 35134 1 sr_mod
k10temp 12611 0
processor 27431 1 powernow_k8
r8169 37356 0
wmi 13202 0
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
mii 12675 1 r8169
button 12895 0
power_supply 13475 1 radeon
thermal_sys 17939 1 processor
ext4 313064 3
mbcache 12930 1 ext4
jbd2 65105 1 ext4
crc16 12343 1 ext4
dm_mod 62468 13
sd_mod 35644 5
crc_t10dif 12348 1 sd_mod
ahci 25089 3
libahci 22616 1 ahci
libata 151572 2 ahci,libahci
scsi_mod 161557 4 sg,sr_mod,sd_mod,libata
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether f4:6d:04:d3:08:de brd ff:ff:ff:ff:ff:ff
inet 192.168.11.46/24 brd 192.168.11.255 scope global eth0
inet6 fe80::f66d:4ff:fed3:8de/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 23150 201 0 0 0 0 0 0 23150 201 0 0 0 0 0 0
eth0: 2720901 1920 0 1921 0 1921 0 0 116739 1477 0 1 0 0 0 0
*** Protocol statistics:
Ip:
2084 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
2082 incoming packets delivered
1700 requests sent out
8 dropped because of missing route
Icmp:
109 ICMP messages received
9 input ICMP message failed.
ICMP input histogram:
destination unreachable: 109
109 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 109
IcmpMsg:
InType3: 109
OutType3: 109
Tcp:
22 active connections openings
0 passive connection openings
10 failed connection attempts
1 connection resets received
2 connections established
1836 segments received
1286 segments send out
92 segments retransmited
0 bad segments received.
1 resets sent
Udp:
115 packets received
22 packets to unknown port received.
0 packet receive errors
213 packets sent
UdpLite:
TcpExt:
83 delayed acks sent
1120 packets directly queued to recvmsg prequeue.
4344 bytes directly in process context from backlog
1081902 bytes directly received in process context from prequeue
581 packet headers predicted
593 packets header predicted and directly queued to user
17 acknowledgments not containing data payload received
9 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
13 other TCP timeouts
1 DSACKs received
1 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
IpExt:
InOctets: 2715265
OutOctets: 125670
*** Device features:
eth0: 0x4180
lo: 0x201b7c65
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
Subsystem: ASUSTeK Computer Inc. Device [1043:8353]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A) [1002:597a] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8445]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9f3000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:68ba] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at feae0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] [1002:aa58]
Subsystem: Giga-byte Technology Device [1458:aa58]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 50
Region 0: Memory at feabc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
02:00.0 USB Controller [0c03]: Device [1b21:1042] (prog-if 30)
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febf0000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 045e:077b Microsoft Corp.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 003: ID 045e:0780 Microsoft Corp.
Bus 006 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04a9:1909 Canon, Inc. CanoScan LiDE 110
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.39-bpo.2-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-bpo.2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.3~bpo60+1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-bpo.2-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.39-bpo.2-amd64 suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-2.6. <none> (no description available)
Versions of packages linux-image-2.6.39-bpo.2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
Reply to: