Bug#611493: Further investigations
Hi,
Recently, my system had more and more difficulties to boot and ended up
with no network connection (no /dev/eth0). So I decided to reinstall the
whole system on a native partition on another disk, leaving only /home
on the lvm/raid0.
Again, I fail to boot (see initram shell dmesg attached + mounts
+ /dev/mapper contents). This has been systematic while booting in
rescue mode is fine. Not very handy, but I boot in rescue mode, log in
as root and init 4. So far it works.
There must be something that the initram script does not do too well
which is revealed by my computer. I will investigate the difference
between quiet and single options.
Please let me know if you have other suggestions,
Pascal
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:23:16 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=bf17e580-6ec1-4060-81a8-03b240e8a4b1 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff90000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff90000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff90000 @ 10000-14000
[ 0.000000] RAMDISK: 3755b000 - 37fefd0f
[ 0.000000] ACPI: RSDP 00000000000fae70 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 00038 (v01 MSTEST TESTONLY 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff90000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff90000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000029ff7] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ff90000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168c494] TEXT DATA BSS ==> [0001000000 - 000168c494]
[ 0.000000] #3 [003755b000 - 0037fefd0f] RAMDISK ==> [003755b000 - 0037fefd0f]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000168d000 - 000168d290] BRK ==> [000168d000 - 000168d290]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3826 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512969 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516795
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=bf17e580-6ec1-4060-81a8-03b240e8a4b1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2049232k/2096704k available (3080k kernel code, 452k absent, 47020k reserved, 1898k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3400.727 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6801.45 BogoMIPS (lpj=13602908)
[ 0.004019] Security Framework initialized
[ 0.004023] SELinux: Disabled at boot.
[ 0.004129] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005118] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005571] Mount-cache hash table entries: 256
[ 0.005685] Initializing cgroup subsys ns
[ 0.005689] Initializing cgroup subsys cpuacct
[ 0.005692] Initializing cgroup subsys devices
[ 0.005693] Initializing cgroup subsys freezer
[ 0.005694] Initializing cgroup subsys net_cls
[ 0.005712] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005713] CPU: L2 cache: 3072K
[ 0.005715] CPU 0/0x0 -> Node 0
[ 0.005717] CPU: Physical Processor ID: 0
[ 0.005718] CPU: Processor Core ID: 0
[ 0.005720] mce: CPU supports 6 MCE banks
[ 0.005725] CPU0: Thermal monitoring enabled (TM2)
[ 0.005729] using mwait in idle threads.
[ 0.005730] Performance Events: Core2 events, Intel PMU driver.
[ 0.005734] ... version: 2
[ 0.005735] ... bit width: 40
[ 0.005736] ... generic registers: 2
[ 0.005736] ... value mask: 000000ffffffffff
[ 0.005737] ... max period: 000000007fffffff
[ 0.005738] ... fixed-purpose events: 3
[ 0.005739] ... event mask: 0000000700000003
[ 0.006418] ACPI: Core revision 20090903
[ 0.016066] Setting APIC routing to flat
[ 0.016355] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056451] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.144020] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.144025] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148085] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 2/0x2 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.008000] CPU2: Thermal monitoring enabled (TM2)
[ 0.236021] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.236025] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.240057] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 3/0x3 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.008000] CPU3: Thermal monitoring enabled (TM2)
[ 0.328115] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.328120] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.332010] Brought up 4 CPUs
[ 0.332012] Total of 4 processors activated (27205.47 BogoMIPS).
[ 0.333525] CPU0 attaching sched-domain:
[ 0.333528] domain 0: span 0-1 level MC
[ 0.333529] groups: 0 1
[ 0.333532] domain 1: span 0-3 level CPU
[ 0.333533] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.333539] CPU1 attaching sched-domain:
[ 0.333540] domain 0: span 0-1 level MC
[ 0.333541] groups: 1 0
[ 0.333543] domain 1: span 0-3 level CPU
[ 0.333544] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.333548] CPU2 attaching sched-domain:
[ 0.333549] domain 0: span 2-3 level MC
[ 0.333550] groups: 2 3
[ 0.333552] domain 1: span 0-3 level CPU
[ 0.333553] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.333557] CPU3 attaching sched-domain:
[ 0.333558] domain 0: span 2-3 level MC
[ 0.333559] groups: 3 2
[ 0.333561] domain 1: span 0-3 level CPU
[ 0.333562] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.333646] devtmpfs: initialized
[ 0.336030] regulator: core version 0.5
[ 0.336061] NET: Registered protocol family 16
[ 0.336129] ACPI: bus type pci registered
[ 0.336172] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.336173] PCI: Not using MMCONFIG.
[ 0.336174] PCI: Using configuration type 1 for base access
[ 0.336375] bio: create slab <bio-0> at 0
[ 0.336399] ACPI: EC: Look up EC in DSDT
[ 0.337837] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.345646] ACPI: Interpreter enabled
[ 0.345648] ACPI: (supports S0 S1 S4 S5)
[ 0.345664] ACPI: Using IOAPIC for interrupt routing
[ 0.345698] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.347236] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.351436] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.356045] ACPI Warning: Incorrect checksum in table [OEMB] - DB, should be DA (20090903/tbutils-314)
[ 0.356122] ACPI: No dock devices found.
[ 0.356202] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.356263] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.356264] pci 0000:00:01.0: PME# disabled
[ 0.356305] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbcfc000-0xfbcfffff]
[ 0.356333] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.356336] pci 0000:00:1b.0: PME# disabled
[ 0.356378] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.356380] pci 0000:00:1c.0: PME# disabled
[ 0.356425] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.356428] pci 0000:00:1c.4: PME# disabled
[ 0.356459] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
[ 0.356493] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f]
[ 0.356526] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f]
[ 0.356561] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f]
[ 0.356598] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbcfbc00-0xfbcfbfff]
[ 0.356634] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.356637] pci 0000:00:1d.7: PME# disabled
[ 0.356728] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.356763] pci 0000:00:1f.2: reg 10 io port: [0xa480-0xa487]
[ 0.356767] pci 0000:00:1f.2: reg 14 io port: [0xa400-0xa403]
[ 0.356770] pci 0000:00:1f.2: reg 18 io port: [0xa080-0xa087]
[ 0.356774] pci 0000:00:1f.2: reg 1c io port: [0xa000-0xa003]
[ 0.356778] pci 0000:00:1f.2: reg 20 io port: [0x9c00-0x9c0f]
[ 0.356781] pci 0000:00:1f.2: reg 24 io port: [0x9880-0x988f]
[ 0.356795] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.356797] pci 0000:00:1f.2: PME# disabled
[ 0.356810] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.356821] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.356847] pci 0000:00:1f.5: reg 10 io port: [0xb400-0xb407]
[ 0.356851] pci 0000:00:1f.5: reg 14 io port: [0xb080-0xb083]
[ 0.356854] pci 0000:00:1f.5: reg 18 io port: [0xb000-0xb007]
[ 0.356858] pci 0000:00:1f.5: reg 1c io port: [0xac00-0xac03]
[ 0.356862] pci 0000:00:1f.5: reg 20 io port: [0xa880-0xa88f]
[ 0.356866] pci 0000:00:1f.5: reg 24 io port: [0xa800-0xa80f]
[ 0.356879] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.356881] pci 0000:00:1f.5: PME# disabled
[ 0.356910] pci 0000:00:01.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.356940] pci 0000:03:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.356950] pci 0000:03:00.0: reg 18 64bit mmio: [0xfbee0000-0xfbeeffff]
[ 0.356955] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd0ff]
[ 0.356964] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff]
[ 0.356984] pci 0000:03:00.0: supports D1 D2
[ 0.357020] pci 0000:03:00.1: reg 10 64bit mmio: [0xfbefc000-0xfbefffff]
[ 0.357059] pci 0000:03:00.1: supports D1 D2
[ 0.364058] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.364061] pci 0000:00:1c.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.364066] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.364153] pci 0000:02:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff]
[ 0.364160] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbde0000-0xfbdeffff]
[ 0.364186] pci 0000:02:00.0: PME# supported from D3hot
[ 0.364190] pci 0000:02:00.0: PME# disabled
[ 0.364233] pci 0000:02:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.364240] pci 0000:02:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.364247] pci 0000:02:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.364254] pci 0000:02:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.364261] pci 0000:02:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.364317] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.364369] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.364372] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 0.364400] pci 0000:04:02.0: reg 10 io port: [0xec00-0xec1f]
[ 0.364405] pci 0000:04:02.0: reg 14 io port: [0xe880-0xe8ff]
[ 0.364436] pci 0000:04:02.0: supports D2
[ 0.364465] pci 0000:04:03.0: reg 10 32bit mmio: [0xfbfff800-0xfbffffff]
[ 0.364470] pci 0000:04:03.0: reg 14 32bit mmio: [0xfbff8000-0xfbffbfff]
[ 0.364502] pci 0000:04:03.0: supports D1 D2
[ 0.364503] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.364506] pci 0000:04:03.0: PME# disabled
[ 0.364540] pci 0000:04:04.0: reg 10 32bit mmio: [0xfbff4000-0xfbff7fff]
[ 0.364545] pci 0000:04:04.0: reg 14 io port: [0xe400-0xe4ff]
[ 0.364563] pci 0000:04:04.0: reg 30 32bit mmio pref: [0xfbfc0000-0xfbfdffff]
[ 0.364581] pci 0000:04:04.0: supports D1 D2
[ 0.364582] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364585] pci 0000:04:04.0: PME# disabled
[ 0.364619] pci 0000:00:1e.0: transparent bridge
[ 0.364621] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.364624] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.364639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.364730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.364765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.364837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.364876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.367260] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367332] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.367404] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.367475] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.367546] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.367620] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.367691] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.367762] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.367834] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367838] vgaarb: loaded
[ 0.367847] PCI: Using ACPI for IRQ routing
[ 0.368039] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.368042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.368045] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.372015] Switching to clocksource tsc
[ 0.372823] pnp: PnP ACPI init
[ 0.372838] ACPI: bus type pnp registered
[ 0.374620] pnp: PnP ACPI: found 14 devices
[ 0.374621] ACPI: ACPI bus type pnp unregistered
[ 0.374633] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.374638] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.374642] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.374644] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.374645] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.374647] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved
[ 0.374649] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.374651] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.374653] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.374654] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
[ 0.374656] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved
[ 0.374660] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.374662] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.374665] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.374670] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.374671] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.374673] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.374675] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.379400] pci 0000:04:04.0: BAR 6: address space collision on of device [0xfbfc0000-0xfbfdffff]
[ 0.379465] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.379466] pci 0000:00:01.0: IO window: disabled
[ 0.379468] pci 0000:00:01.0: MEM window: disabled
[ 0.379470] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.379473] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.379475] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.379478] pci 0000:00:1c.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.379481] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.379485] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 0.379486] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.379490] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff
[ 0.379492] pci 0000:00:1c.4: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.379497] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.379498] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.379501] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.379504] pci 0000:00:1e.0: PREFETCH window: 0x80200000-0x802fffff
[ 0.379513] alloc irq_desc for 16 on node -1
[ 0.379516] alloc kstat_irqs on node -1
[ 0.379520] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.379523] pci 0000:00:01.0: setting latency timer to 64
[ 0.379528] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.379530] pci 0000:00:1c.0: setting latency timer to 64
[ 0.379535] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.379538] pci 0000:00:1c.4: setting latency timer to 64
[ 0.379542] pci 0000:00:1e.0: setting latency timer to 64
[ 0.379545] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.379546] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.379548] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.379549] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.379551] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.379552] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.379554] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.379555] pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff]
[ 0.379556] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.379558] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.379559] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.379560] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x802fffff]
[ 0.379562] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.379563] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.379584] NET: Registered protocol family 2
[ 0.379669] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.380099] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.381532] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.382016] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.382018] TCP reno registered
[ 0.382117] NET: Registered protocol family 1
[ 0.382212] pci 0000:03:00.0: Boot video device
[ 0.382270] Unpacking initramfs...
[ 0.538282] Freeing initrd memory: 10835k freed
[ 0.542284] audit: initializing netlink socket (disabled)
[ 0.542296] type=2000 audit(1318066768.539:1): initialized
[ 0.544306] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.545280] VFS: Disk quotas dquot_6.5.2
[ 0.545313] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.545368] msgmni has been set to 4023
[ 0.545640] alg: No test for stdrng (krng)
[ 0.545680] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.545682] io scheduler noop registered
[ 0.545683] io scheduler anticipatory registered
[ 0.545684] io scheduler deadline registered
[ 0.545702] io scheduler cfq registered (default)
[ 0.545774] alloc irq_desc for 24 on node -1
[ 0.545776] alloc kstat_irqs on node -1
[ 0.545783] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.545787] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.545847] alloc irq_desc for 25 on node -1
[ 0.545848] alloc kstat_irqs on node -1
[ 0.545853] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.545858] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.545930] alloc irq_desc for 26 on node -1
[ 0.545932] alloc kstat_irqs on node -1
[ 0.545936] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.545941] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.546891] Linux agpgart interface v0.103
[ 0.546925] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.546999] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.547192] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.547302] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.547334] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.547335] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.548044] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.548096] mice: PS/2 mouse device common for all mice
[ 0.548122] rtc_cmos 00:03: RTC can wake from S4
[ 0.548141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.548160] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.548169] cpuidle: using governor ladder
[ 0.548170] cpuidle: using governor menu
[ 0.548173] No iBFT detected.
[ 0.548366] TCP cubic registered
[ 0.548427] NET: Registered protocol family 10
[ 0.548867] Mobile IPv6
[ 0.548869] NET: Registered protocol family 17
[ 0.548919] PM: Resume from disk failed.
[ 0.548925] registered taskstats version 1
[ 0.549206] rtc_cmos 00:03: setting system clock to 2011-10-08 09:39:29 UTC (1318066769)
[ 0.549234] Initalizing network drop monitor service
[ 0.549261] Freeing unused kernel memory: 592k freed
[ 0.549410] Write protecting the kernel read-only data: 4240k
[ 0.570099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.593001] udev[79]: starting version 164
[ 0.633179] usbcore: registered new interface driver usbfs
[ 0.633242] usbcore: registered new interface driver hub
[ 0.633351] usbcore: registered new device driver usb
[ 0.635544] SCSI subsystem initialized
[ 0.644057] libata version 3.00 loaded.
[ 0.645097] alloc irq_desc for 19 on node -1
[ 0.645099] alloc kstat_irqs on node -1
[ 0.645105] skge 0000:04:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.645141] skge 1.13 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9
[ 0.645532] skge eth0: addr 00:17:31:67:bb:30
[ 0.646428] ata_piix 0000:00:1f.2: version 2.13
[ 0.646451] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.646455] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.646498] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.646539] scsi0 : ata_piix
[ 0.646646] scsi1 : ata_piix
[ 0.648036] ata1: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0x9c00 irq 19
[ 0.648039] ata2: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9c08 irq 19
[ 0.648055] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.648058] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.648083] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.648119] scsi2 : ata_piix
[ 0.648177] scsi3 : ata_piix
[ 0.648658] ahci 0000:02:00.0: version 3.0
[ 0.648671] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.649094] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19
[ 0.649096] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19
[ 0.649659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.649689] alloc irq_desc for 23 on node -1
[ 0.649691] alloc kstat_irqs on node -1
[ 0.649697] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.649708] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.649710] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.649724] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.649749] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.653631] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.653642] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfbc00
[ 0.663738] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.663741] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.663746] ahci 0000:02:00.0: setting latency timer to 64
[ 0.663906] scsi4 : ahci
[ 0.663981] scsi5 : ahci
[ 0.664045] ata5: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
[ 0.664048] ata6: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
[ 0.664088] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.664093] alloc irq_desc for 17 on node -1
[ 0.664094] alloc kstat_irqs on node -1
[ 0.664099] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.664121] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 0.664187] scsi6 : pata_jmicron
[ 0.664240] scsi7 : pata_jmicron
[ 0.664795] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 0.664797] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 0.667761] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.667779] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.667781] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.667783] usb usb1: Product: EHCI Host Controller
[ 0.667785] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.667786] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.667842] usb usb1: configuration #1 chosen from 1 choice
[ 0.667880] hub 1-0:1.0: USB hub found
[ 0.667884] hub 1-0:1.0: 8 ports detected
[ 0.704768] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.704797] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.704801] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.704803] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.704813] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.704832] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.704857] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.704859] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.704860] usb usb2: Product: UHCI Host Controller
[ 0.704861] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.704862] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.704911] usb usb2: configuration #1 chosen from 1 choice
[ 0.704930] hub 2-0:1.0: USB hub found
[ 0.704934] hub 2-0:1.0: 2 ports detected
[ 0.704969] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.704973] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.704975] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.704980] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.704998] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 0.705018] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.705019] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.705021] usb usb3: Product: UHCI Host Controller
[ 0.705022] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.705023] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.705056] usb usb3: configuration #1 chosen from 1 choice
[ 0.705073] hub 3-0:1.0: USB hub found
[ 0.705077] hub 3-0:1.0: 2 ports detected
[ 0.705104] alloc irq_desc for 18 on node -1
[ 0.705106] alloc kstat_irqs on node -1
[ 0.705109] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.705113] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.705114] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.705119] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.705142] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 0.705161] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.705163] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.705164] usb usb4: Product: UHCI Host Controller
[ 0.705165] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.705166] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.705200] usb usb4: configuration #1 chosen from 1 choice
[ 0.705216] hub 4-0:1.0: USB hub found
[ 0.705219] hub 4-0:1.0: 2 ports detected
[ 0.705248] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.705252] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.705254] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.705260] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.705277] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 0.705295] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.705297] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.705298] usb usb5: Product: UHCI Host Controller
[ 0.705299] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.705300] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.705336] usb usb5: configuration #1 chosen from 1 choice
[ 0.705354] hub 5-0:1.0: USB hub found
[ 0.705358] hub 5-0:1.0: 2 ports detected
[ 0.836204] ata7.00: ATAPI: ATAPI DVD RW 4XMax, 2.11, max UDMA/33
[ 0.836227] ata7.01: ATAPI: PLEXTOR DVD-ROM PX-130A, 1.01, max UDMA/100
[ 0.852214] ata7.00: configured for UDMA/33
[ 0.868238] ata7.01: configured for UDMA/100
[ 0.978197] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.987767] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.991766] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.128036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.152268] ata4.00: HPA detected: current 625140335, native 625142448
[ 1.152272] ata4.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 1.152274] ata4.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.160279] ata4.00: configured for UDMA/133
[ 1.221507] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.444048] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.444057] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.449547] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.449556] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.453924] ata1.00: ATA-7: WDC WD2500JS-00NCB1, 10.02E02, max UDMA/133
[ 1.453926] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.460282] ata1.00: configured for UDMA/133
[ 1.460366] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5
[ 1.498248] ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[ 1.498250] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.564895] ata2.00: configured for UDMA/133
[ 1.564983] scsi 1:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 1.565144] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 1.566169] scsi 6:0:0:0: CD-ROM ATAPI DVD RW 4XMax 2.11 PQ: 0 ANSI: 5
[ 1.566958] scsi 6:0:1:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.01 PQ: 0 ANSI: 5
[ 1.732000] alloc irq_desc for 21 on node -1
[ 1.732002] alloc kstat_irqs on node -1
[ 1.732007] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.735766] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.735795] sd 3:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.735842] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.735843] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.735852] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.735853] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.735874] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.735882] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.735923] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.735974] sd 0:0:0:0: [sda] Write Protect is off
[ 1.735975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.735990] sdc:
[ 1.736089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.736136] sdb:
[ 1.736231] sda: sda1 sda2 sda3
[ 1.741443] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.741681] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.741688] Uniform CD-ROM driver Revision: 3.20
[ 1.741840] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.745533] sr1: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray
[ 1.745604] sr 6:0:1:0: Attached scsi CD-ROM sr1
[ 1.754468] sdb1 sdb2 sdb3
[ 1.754654] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.797606] sdc1 sdc2 sdc3 <
[ 1.804012] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
[ 1.812784] sdc5 sdc6 sdc7 > sdc4
[ 1.863628] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.866431] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.866457] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.866478] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.866499] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 1.866519] sr 6:0:1:0: Attached scsi generic sg4 type 5
[ 2.304065] firewire_core: created device fw0: GUID 0011d80000c7e76a, S400
[ 2.559995] usb 3-1: New USB device found, idVendor=0463, idProduct=ffff
[ 2.559997] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 2.559999] usb 3-1: Product: ELLIPSE
[ 2.560005] usb 3-1: Manufacturer: MGE OPS SYSTEMS
[ 2.560006] usb 3-1: SerialNumber: BDCJ510H2
[ 2.560059] usb 3-1: configuration #1 chosen from 1 choice
[ 2.800007] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.954990] usb 3-2: New USB device found, idVendor=04b4, idProduct=0033
[ 2.954992] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.955031] usb 3-2: configuration #1 chosen from 1 choice
[ 2.963816] usbcore: registered new interface driver hiddev
[ 6.642024] generic-usb 0003:0463:FFFF.0001: hiddev0,hidraw0: USB HID v1.00 Device [MGE OPS SYSTEMS ELLIPSE] on usb-0000:00:1d.1-1/input0
[ 6.656102] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2
[ 6.656135] generic-usb 0003:04B4:0033.0002: input,hidraw1: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:1d.1-2/input0
[ 6.656147] usbcore: registered new interface driver usbhid
[ 6.656148] usbhid: v2.6:USB HID core driver
[ 6.704372] md: raid0 personality registered for level 0
[ 6.706214] md: raid1 personality registered for level 1
[ 6.763019] md: md1 stopped.
[ 6.763798] md: bind<sdb2>
[ 6.763916] md: bind<sda2>
[ 6.764754] raid1: raid set md1 active with 2 out of 2 mirrors
[ 6.764768] md1: detected capacity change from 0 to 129029898240
[ 6.765279] md1: unknown partition table
[ 6.790991] md: md0 stopped.
[ 6.791667] md: bind<sdb3>
[ 6.791787] md: bind<sda3>
[ 6.792598] raid0: looking at sda3
[ 6.792599] raid0: comparing sda3(235882240)
[ 6.792600] with sda3(235882240)
[ 6.792601] raid0: END
[ 6.792602] raid0: ==> UNIQUE
[ 6.792603] raid0: 1 zones
[ 6.792603] raid0: looking at sdb3
[ 6.792604] raid0: comparing sdb3(235882240)
[ 6.792605] with sda3(235882240)
[ 6.792606] raid0: EQUAL
[ 6.792607] raid0: FINAL 1 zones
[ 6.792609] raid0: done.
[ 6.792610] raid0 : md_size is 471764480 sectors.
[ 6.792611] ******* md0 configuration *********
[ 6.792611] zone0=[sda3/sdb3/]
[ 6.792613] zone offset=0kb device offset=0kb size=235882240kb
[ 6.792614] **********************************
[ 6.792615]
[ 6.792619] md0: detected capacity change from 0 to 241543413760
[ 6.793175] md0: unknown partition table
[ 6.797753] device-mapper: uevent: version 1.0.3
[ 6.797910] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 6.853021] PM: Starting manual resume from disk
[ 6.853023] PM: Resume from partition 8:34
[ 6.853024] PM: Checking hibernation image.
[ 6.853164] PM: Error -22 checking image file
[ 6.853166] PM: Resume from disk failed.
[ 6.887742] kjournald starting. Commit interval 5 seconds
[ 6.887747] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.011685] udev[491]: starting version 164
[ 8.441084] ACPI: SSDT 000000007ff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 8.441383] processor LNXCPU:00: registered as cooling_device0
[ 8.441796] ACPI: SSDT 000000007ff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 8.442005] processor LNXCPU:01: registered as cooling_device1
[ 8.442089] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 8.442095] ACPI: Power Button [PWRB]
[ 8.442966] ACPI: SSDT 000000007ff9e3d0 0013A (v01 AMI CPU3PM 00000001 INTL 20060113)
[ 8.443648] processor LNXCPU:02: registered as cooling_device2
[ 8.443723] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.443762] ACPI: Power Button [PWRF]
[ 8.444082] ACPI: SSDT 000000007ff9e510 0013A (v01 AMI CPU4PM 00000001 INTL 20060113)
[ 8.444247] processor LNXCPU:03: registered as cooling_device3
[ 8.805010] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.987510] ICE1724 0000:04:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.028200] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 9.028206] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.028209] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 9.028256] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.042372] [drm] Initialized drm 1.1.0 20060810
[ 9.114695] alloc irq_desc for 22 on node -1
[ 9.114698] alloc kstat_irqs on node -1
[ 9.114704] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.114736] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.182526] [drm] radeon kernel modesetting enabled.
[ 9.182565] radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.182569] radeon 0000:03:00.0: setting latency timer to 64
[ 9.184152] [drm] radeon: Initializing kernel modesetting.
[ 9.184342] [drm] register mmio base: 0xFBEE0000
[ 9.184343] [drm] register mmio size: 65536
[ 9.188927] ATOM BIOS: 11X
[ 9.188939] [drm] Clocks initialized !
[ 9.190297] [drm] Detected VRAM RAM=256M, BAR=256M
[ 9.190299] [drm] RAM width 256bits DDR
[ 9.190392] [TTM] Zone kernel: Available graphics memory: 1030330 kiB.
[ 9.190405] [drm] radeon: 256M of VRAM memory ready
[ 9.190406] [drm] radeon: 512M of GTT memory ready.
[ 9.190450] alloc irq_desc for 27 on node -1
[ 9.190451] alloc kstat_irqs on node -1
[ 9.190462] radeon 0000:03:00.0: irq 27 for MSI/MSI-X
[ 9.190467] radeon 0000:03:00.0: radeon: using MSI.
[ 9.190493] [drm] radeon: irq initialized.
[ 9.190495] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 9.190814] [drm] Loading RV670 Microcode
[ 9.190816] platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin
[ 9.230118] r600_cp: Failed to load firmware "radeon/RV670_pfp.bin"
[ 9.230172] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 9.230225] radeon 0000:03:00.0: disabling GPU acceleration
[ 9.230291] radeon 0000:03:00.0: ffff88007d713c00 unpin not necessary
[ 9.230293] radeon 0000:03:00.0: ffff88007d713c00 unpin not necessary
[ 9.230304] [drm] Enabling audio support
[ 9.230463] [drm] Default TV standard: PAL
[ 9.230510] [drm] Radeon Display Connectors
[ 9.230511] [drm] Connector 0:
[ 9.230512] [drm] DVI-I
[ 9.230513] [drm] HPD1
[ 9.230514] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 9.230515] [drm] Encoders:
[ 9.230516] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 9.230517] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 9.230518] [drm] Connector 1:
[ 9.230519] [drm] DIN
[ 9.230519] [drm] Encoders:
[ 9.230520] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 9.230521] [drm] Connector 2:
[ 9.230522] [drm] DVI-I
[ 9.230523] [drm] HPD2
[ 9.230524] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 9.230525] [drm] Encoders:
[ 9.230526] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 9.230527] [drm] DFP2: INTERNAL_LVTM1
[ 9.589379] [drm] fb mappable at 0xD0040000
[ 9.589380] [drm] vram apper at 0xD0000000
[ 9.589381] [drm] size 9216000
[ 9.589382] [drm] fb depth is 24
[ 9.589383] [drm] pitch is 7680
[ 9.624024] Console: switching to colour frame buffer device 240x75
[ 9.632972] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 9.646895] fb0: radeondrmfb frame buffer device
[ 9.646896] registered panic notifier
[ 9.646899] [drm] Initialized radeon 2.0.0 20080528 for 0000:03:00.0 on minor 0
[ 9.646925] HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.646982] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 10.526550] Adding 1951888k swap on /dev/sdc2. Priority:-1 extents:1 across:1951888k
[ 10.654007] EXT3 FS on sdc7, internal journal
[ 10.962846] loop: module loaded
[ 11.676716] general protection fault: 0000 [#1] SMP
[ 11.676866] last sysfs file: /sys/devices/virtual/block/dm-5/removable
[ 11.676980] CPU 2
[ 11.677045] Modules linked in: loop firewire_sbp2 dm_crypt snd_hda_codec_atihdmi snd_hda_codec_analog radeon ttm snd_hda_intel drm_kms_helper snd_hda_codec drm i2c_i801 i2c_algo_bit snd_ice1724 snd_seq_midi snd_seq_midi_event snd_hwdep snd_rawmidi snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4xxx_adda snd_ak4114 snd_seq snd_pcm snd_pt2258 snd_timer snd_i2c snd_seq_device pcspkr i2c_core snd soundcore snd_page_alloc evdev button asus_atk0110 processor ext3 jbd mbcache dm_mod raid1 raid0 md_mod usbhid hid sg sr_mod cdrom sd_mod crc_t10dif firewire_ohci ata_generic uhci_hcd pata_jmicron firewire_core ehci_hcd ahci crc_itu_t ata_piix skge libata scsi_mod usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 11.679560] Pid: 1063, comm: vgchange Not tainted 2.6.32-5-amd64 #1 System Product Name
[ 11.679688] RIP: 0010:[<ffffffff810e7f34>] [<ffffffff810e7f34>] __kmalloc+0xd2/0x141
[ 11.679832] RSP: 0018:ffff88007d7b7b68 EFLAGS: 00010086
[ 11.679927] RAX: 0000000000000000 RBX: f000eef3f000eef3 RCX: 0000000000000008
[ 11.680042] RDX: ffff8800019120b0 RSI: 00000000000000d0 RDI: ffffffff81196d4d
[ 11.680156] RBP: 0000000000000246 R08: 0000000000000002 R09: ffffffff813a1e64
[ 11.680270] R10: 00000000fffffff4 R11: ffff88007ce58be0 R12: ffffffff81455f10
[ 11.680350] R13: 00000000000000d0 R14: 00000000000000d0 R15: 0000000000000008
[ 11.680350] FS: 00007fe0251fb7a0(0000) GS:ffff880001900000(0000) knlGS:0000000000000000
[ 11.680350] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 11.680350] CR2: 00007fe025213000 CR3: 000000007e915000 CR4: 00000000000406e0
[ 11.680350] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 11.680350] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 11.680350] Process vgchange (pid: 1063, threadinfo ffff88007d7b6000, task ffff88007d5d3f90)
[ 11.680350] Stack:
[ 11.680350] ffffffffffffffff ffffffff81196d4d 0000000800000001 00000000000000d0
[ 11.680350] <0> ffff88007d7b7c58 0000000000000008 ffffffff813a1e64 0000000000000000
[ 11.680350] <0> ffffc90012391030 ffffffff81196d4d 00000000fffffff4 ffffffff8148ad40
[ 11.680350] Call Trace:
[ 11.680350] [<ffffffff81196d4d>] ? kvasprintf+0x41/0x68
[ 11.680350] [<ffffffff81196d4d>] ? kvasprintf+0x41/0x68
[ 11.680350] [<ffffffff8118f507>] ? kobject_set_name_vargs+0x22/0x56
[ 11.680350] [<ffffffff8118f550>] ? kobject_add_varg+0x15/0x40
[ 11.680350] [<ffffffff8118f657>] ? kobject_add+0x74/0x7c
[ 11.680350] [<ffffffff8118f657>] ? kobject_add+0x74/0x7c
[ 11.680350] [<ffffffff8118fbc8>] ? kobject_uevent_env+0x70/0x3e1
[ 11.680350] [<ffffffff81141953>] ? internal_create_group+0xdc/0x15a
[ 11.680350] [<ffffffff8117683e>] ? elv_register_queue+0x2b/0x6f
[ 11.680350] [<ffffffff81180903>] ? blk_register_queue+0x7f/0xcc
[ 11.680350] [<ffffffff81184749>] ? add_disk+0xb8/0x108
[ 11.680350] [<ffffffffa01bf01a>] ? dm_create+0x420/0x545 [dm_mod]
[ 11.680350] [<ffffffffa01c4660>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 11.680350] [<ffffffffa01c46c9>] ? dev_create+0x69/0x2e9 [dm_mod]
[ 11.680350] [<ffffffffa01c4660>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 11.680350] [<ffffffffa01c4bc0>] ? ctl_ioctl+0x1c6/0x20e [dm_mod]
[ 11.680350] [<ffffffffa01c4c16>] ? dm_ctl_ioctl+0xe/0x12 [dm_mod]
[ 11.680350] [<ffffffff810fa94e>] ? vfs_ioctl+0x21/0x6c
[ 11.680350] [<ffffffff810fae9c>] ? do_vfs_ioctl+0x48d/0x4cb
[ 11.680350] [<ffffffff810f210b>] ? sys_newstat+0x23/0x30
[ 11.680350] [<ffffffff810faf2b>] ? sys_ioctl+0x51/0x70
[ 11.680350] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[ 11.680350] Code: fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
[ 11.680350] RIP [<ffffffff810e7f34>] __kmalloc+0xd2/0x141
[ 11.680350] RSP <ffff88007d7b7b68>
[ 11.680350] ---[ end trace dcc0deced10a1bb4 ]---
/dev/sdc7 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
archive-olDebian
archive-sauvegardes
control
hmint-lhmint
hmint-nhmint
lainie-home
lainie-var
Reply to: