[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#638659: [linux-2.6] No sound



Package: linux-2.6
Version: linux-image-3.0.0-1-amd64
Severity: normal

--- Please enter the report below this line. ---
After upgrading from 2.6.39 to 3.0.0 kernel I get no sound systemwide (booting 
from 2.6.39 still has sound though so this seems to be a kernel issue). I'm 
attaching lspci and dmesg output. I will send further info upon request.

Regards,
Antonio

--- System information. ---
Architecture: amd64
Kernel:       Linux 3.0.0-1-amd64

Debian Release: wheezy/sid
  900 testing         www.debian-multimedia.org 
  900 testing         security.debian.org 
  900 testing         ftp.es.debian.org 
  900 testing         dl.google.com 
  800 stable          security.debian.org 
  800 stable          ftp.es.debian.org 
  700 unstable        ftp.es.debian.org 
  500 testing-proposed-updates ftp.es.debian.org 
  500 proposed-updates ftp.es.debian.org 

--- Package information. ---
Package's Depends field is empty.

Package's Recommends field is empty.

Package's Suggests field is empty.



00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. Device 6290
00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:0c.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:0c.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0c.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
00:0c.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1)
04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=e2363bcd-bf17-4fa6-bac6-40dbb80d1a0f ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: System manufacturer System Product Name/A8V-VM SE, BIOS 0702    05/21/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ f0000000 old size 32 MB
[    0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[    0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000
[    0.000000]  0000000000 - 007fe00000 page 2M
[    0.000000]  007fe00000 - 007ffb0000 page 4k
[    0.000000] kernel direct mapping tables up to 7ffb0000 @ 7ffac000-7ffb0000
[    0.000000] RAMDISK: 36c9a000 - 37645000
[    0.000000] ACPI: RSDP 00000000000fa810 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 000000007ffb0100 00044 (v01 A M I  OEMXSDT  05000721 MSFT 00000097)
[    0.000000] ACPI: FACP 000000007ffb0290 000F4 (v03 A M I  OEMFACP  05000721 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000007ffb0440 0493D (v01  A0710 A0710000 00000000 INTL 02002026)
[    0.000000] ACPI: FACS 000000007ffbe000 00040
[    0.000000] ACPI: APIC 000000007ffb0390 00068 (v01 A M I  OEMAPIC  05000721 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000007ffb0400 0003C (v01 A M I  OEMMCFG  05000721 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000007ffbe040 00046 (v01 A M I  AMI_OEM  05000721 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007ffb0000
[    0.000000] Initmem setup node 0 0000000000000000-000000007ffb0000
[    0.000000]   NODE_DATA [000000007ffa7000 - 000000007ffabfff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffb0
[    0.000000] On node 0 totalpages: 524095
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7111 pages used for memmap
[    0.000000]   DMA32 zone: 513001 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s78912 r8192 d23488 u1048576
[    0.000000] pcpu-alloc: s78912 r8192 d23488 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516923
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=e2363bcd-bf17-4fa6-bac6-40dbb80d1a0f ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ f0000000 old size 32 MB
[    0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[    0.000000] Node 0: aperture @ f0000000 size 128 MB
[    0.000000] Memory: 2049136k/2096832k available (3324k kernel code, 452k absent, 47244k reserved, 3371k data, 560k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1995.447 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.89 BogoMIPS (lpj=7981788)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.008106] Security Framework initialized
[    0.008112] SELinux:  Disabled at boot.
[    0.008357] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009684] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.010327] Mount-cache hash table entries: 256
[    0.010529] Initializing cgroup subsys cpuacct
[    0.010536] Initializing cgroup subsys memory
[    0.010554] Initializing cgroup subsys devices
[    0.010557] Initializing cgroup subsys freezer
[    0.010560] Initializing cgroup subsys net_cls
[    0.010563] Initializing cgroup subsys blkio
[    0.010626] tseg: 0000000000
[    0.010644] mce: CPU supports 5 MCE banks
[    0.010679] SMP alternatives: switching to UP code
[    0.012768] ACPI: Core revision 20110413
[    0.016441] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.056256] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Brought up 1 CPUs
[    0.060003] Total of 1 processors activated (3990.89 BogoMIPS).
[    0.060003] devtmpfs: initialized
[    0.064181] PM: Registering ACPI NVS region at 7ffbe000 (139264 bytes)
[    0.064368] print_constraints: dummy: 
[    0.064452] NET: Registered protocol family 16
[    0.064574] node 0 link 0: io port [1000, ffffff]
[    0.064578] TOM: 0000000080000000 aka 2048M
[    0.064582] node 0 link 0: mmio [a0000, bffff]
[    0.064586] node 0 link 0: mmio [80000000, ffffffff]
[    0.064589] bus: [00, ff] on node 0 link 0
[    0.064592] bus: 00 index 0 [io  0x0000-0xffff]
[    0.064595] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.064598] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[    0.064609] ACPI: bus type pci registered
[    0.064691] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.064695] PCI: not using MMCONFIG
[    0.064697] PCI: Using configuration type 1 for base access
[    0.065440] bio: create slab <bio-0> at 0
[    0.066780] ACPI: EC: Look up EC in DSDT
[    0.068191] ACPI: Executed 1 blocks of module-level executable AML code
[    0.071611] ACPI: Interpreter enabled
[    0.071616] ACPI: (supports S0 S1 S3 S4 S5)
[    0.071647] ACPI: Using IOAPIC for interrupt routing
[    0.071678] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.073401] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.103037] ACPI: No dock devices found.
[    0.103040] HEST: Table not found.
[    0.103045] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.103137] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.103343] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.103347] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.103351] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.103354] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.103358] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff77ffff] (ignored)
[    0.103381] pci 0000:00:00.0: [1106:0336] type 0 class 0x000600
[    0.103394] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.103477] pci 0000:00:00.1: [1106:1336] type 0 class 0x000600
[    0.103529] pci 0000:00:00.2: [1106:2336] type 0 class 0x000600
[    0.103583] pci 0000:00:00.3: [1106:3336] type 0 class 0x000600
[    0.103635] pci 0000:00:00.4: [1106:4336] type 0 class 0x000600
[    0.103687] pci 0000:00:00.5: [1106:5336] type 0 class 0x000800
[    0.103761] pci 0000:00:00.6: [1106:6290] type 0 class 0x000600
[    0.103812] pci 0000:00:00.7: [1106:7336] type 0 class 0x000600
[    0.103866] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[    0.103906] pci 0000:00:01.0: supports D1
[    0.103925] pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
[    0.103987] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.103992] pci 0000:00:02.0: PME# disabled
[    0.104029] pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
[    0.104092] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.104096] pci 0000:00:03.0: PME# disabled
[    0.104136] pci 0000:00:0c.0: [14f1:8800] type 0 class 0x000400
[    0.104153] pci 0000:00:0c.0: reg 10: [mem 0xdf000000-0xdfffffff]
[    0.104232] pci 0000:00:0c.1: [14f1:8811] type 0 class 0x000480
[    0.104248] pci 0000:00:0c.1: reg 10: [mem 0xde000000-0xdeffffff]
[    0.104321] pci 0000:00:0c.2: [14f1:8802] type 0 class 0x000480
[    0.104337] pci 0000:00:0c.2: reg 10: [mem 0xdd000000-0xddffffff]
[    0.104411] pci 0000:00:0c.4: [14f1:8804] type 0 class 0x000480
[    0.104426] pci 0000:00:0c.4: reg 10: [mem 0xdc000000-0xdcffffff]
[    0.104506] pci 0000:00:0f.0: [1106:0591] type 0 class 0x000101
[    0.104523] pci 0000:00:0f.0: reg 10: [io  0xd800-0xd807]
[    0.104533] pci 0000:00:0f.0: reg 14: [io  0xd400-0xd403]
[    0.104543] pci 0000:00:0f.0: reg 18: [io  0xd000-0xd007]
[    0.104554] pci 0000:00:0f.0: reg 1c: [io  0xc800-0xc803]
[    0.104564] pci 0000:00:0f.0: reg 20: [io  0xc400-0xc40f]
[    0.104574] pci 0000:00:0f.0: reg 24: [io  0xc000-0xc0ff]
[    0.104618] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[    0.104663] pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
[    0.104721] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[    0.104764] pci 0000:00:10.0: reg 20: [io  0xb800-0xb81f]
[    0.104795] pci 0000:00:10.0: supports D1 D2
[    0.104798] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104803] pci 0000:00:10.0: PME# disabled
[    0.104823] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.104866] pci 0000:00:10.1: reg 20: [io  0xb400-0xb41f]
[    0.104897] pci 0000:00:10.1: supports D1 D2
[    0.104900] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104904] pci 0000:00:10.1: PME# disabled
[    0.104924] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[    0.104967] pci 0000:00:10.2: reg 20: [io  0xb000-0xb01f]
[    0.104998] pci 0000:00:10.2: supports D1 D2
[    0.105001] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.105006] pci 0000:00:10.2: PME# disabled
[    0.105026] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[    0.105069] pci 0000:00:10.3: reg 20: [io  0xa800-0xa81f]
[    0.105100] pci 0000:00:10.3: supports D1 D2
[    0.105103] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.105107] pci 0000:00:10.3: PME# disabled
[    0.105127] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[    0.105143] pci 0000:00:10.4: reg 10: [mem 0xdbfffc00-0xdbfffcff]
[    0.105201] pci 0000:00:10.4: supports D1 D2
[    0.105204] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.105209] pci 0000:00:10.4: PME# disabled
[    0.105233] pci 0000:00:11.0: [1106:3337] type 0 class 0x000601
[    0.105331] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
[    0.105389] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.105405] pci 0000:00:12.0: reg 10: [io  0xa400-0xa4ff]
[    0.105416] pci 0000:00:12.0: reg 14: [mem 0xdbfff800-0xdbfff8ff]
[    0.105469] pci 0000:00:12.0: supports D1 D2
[    0.105471] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.105476] pci 0000:00:12.0: PME# disabled
[    0.105497] pci 0000:00:13.0: [1106:337b] type 1 class 0x000604
[    0.105573] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.105599] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.105621] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.105643] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.105671] PCI: peer root bus 00 res updated from pci conf
[    0.105725] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.105730] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.105735] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.105741] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.105804] pci 0000:02:00.0: [10de:0421] type 0 class 0x000300
[    0.105818] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.105833] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.105848] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.105858] pci 0000:02:00.0: reg 24: [io  0xe800-0xe87f]
[    0.105869] pci 0000:02:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref]
[    0.112023] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.112029] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.112034] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.112041] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.112089] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.112094] pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.112100] pci 0000:00:03.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.112107] pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.112153] pci 0000:04:01.0: [1106:3288] type 0 class 0x000403
[    0.112169] pci 0000:04:01.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[    0.112220] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[    0.112224] pci 0000:04:01.0: PME# disabled
[    0.112236] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.112273] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[    0.112278] pci 0000:00:13.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.112283] pci 0000:00:13.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.112289] pci 0000:00:13.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.112311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.112592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.112667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.112695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[    0.112744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[    0.112797]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.112802]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.112804] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.128633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.128696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.128756] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.128817] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.128883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.128950] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.129011] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.129073] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.129226] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.129230] vgaarb: loaded
[    0.129232] vgaarb: bridge control possible 0000:02:00.0
[    0.129289] PCI: Using ACPI for IRQ routing
[    0.137070] PCI: pci_cache_line_size set to 64 bytes
[    0.137080] pci 0000:00:00.0: address space collision: [mem 0xf0000000-0xf7ffffff pref] conflicts with GART [mem 0xf0000000-0xf7ffffff]
[    0.137189] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.137192] reserve RAM buffer: 000000007ffb0000 - 000000007fffffff 
[    0.139417] pnp: PnP ACPI init
[    0.139439] ACPI: bus type pnp registered
[    0.139575] pnp 00:00: [bus 00-ff]
[    0.139579] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.139582] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.139585] pnp 00:00: [io  0x0d00-0xffff window]
[    0.139589] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.139592] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.139595] pnp 00:00: [mem 0x80000000-0xff77ffff window]
[    0.139676] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.139776] pnp 00:01: [dma 4]
[    0.139779] pnp 00:01: [io  0x0000-0x000f]
[    0.139781] pnp 00:01: [io  0x0081-0x0083]
[    0.139784] pnp 00:01: [io  0x0087]
[    0.139787] pnp 00:01: [io  0x0089-0x008b]
[    0.139790] pnp 00:01: [io  0x008f]
[    0.139793] pnp 00:01: [io  0x00c0-0x00df]
[    0.139825] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.139841] pnp 00:02: [io  0x0070-0x0071]
[    0.139855] pnp 00:02: [irq 8]
[    0.139888] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.139900] pnp 00:03: [io  0x0061]
[    0.139934] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.139947] pnp 00:04: [io  0x00f0-0x00ff]
[    0.139953] pnp 00:04: [irq 13]
[    0.139985] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.140437] pnp 00:05: [irq 6]
[    0.140440] pnp 00:05: [dma 2]
[    0.140443] pnp 00:05: [io  0x03f0-0x03f5]
[    0.140446] pnp 00:05: [io  0x03f7]
[    0.140525] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.140938] pnp 00:06: [io  0x0378-0x037f]
[    0.140941] pnp 00:06: [io  0x0778-0x077b]
[    0.140947] pnp 00:06: [irq 7]
[    0.140950] pnp 00:06: [dma 3]
[    0.141155] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.141198] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.141201] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.141204] pnp 00:07: [io  0x0290-0x0297]
[    0.141288] system 00:07: [io  0x0290-0x0297] has been reserved
[    0.141292] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141410] pnp 00:08: [io  0x0010-0x001f]
[    0.141413] pnp 00:08: [io  0x0022-0x003f]
[    0.141416] pnp 00:08: [io  0x0044-0x005f]
[    0.141418] pnp 00:08: [io  0x0062-0x0063]
[    0.141421] pnp 00:08: [io  0x0065-0x006f]
[    0.141424] pnp 00:08: [io  0x0072-0x007f]
[    0.141427] pnp 00:08: [io  0x0080]
[    0.141430] pnp 00:08: [io  0x0084-0x0086]
[    0.141433] pnp 00:08: [io  0x0088]
[    0.141436] pnp 00:08: [io  0x008c-0x008e]
[    0.141439] pnp 00:08: [io  0x0090-0x009f]
[    0.141441] pnp 00:08: [io  0x00a2-0x00bf]
[    0.141444] pnp 00:08: [io  0x00e0-0x00ef]
[    0.141447] pnp 00:08: [io  0x03e0-0x03e7]
[    0.141450] pnp 00:08: [mem 0xff300000-0xff3fffff]
[    0.141454] pnp 00:08: [io  0x04d0-0x04d1]
[    0.141456] pnp 00:08: [io  0x0800-0x087f]
[    0.141459] pnp 00:08: [io  0x0400-0x041f]
[    0.141463] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.141547] system 00:08: [io  0x03e0-0x03e7] has been reserved
[    0.141551] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.141555] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.141559] system 00:08: [io  0x0400-0x041f] has been reserved
[    0.141564] system 00:08: [mem 0xff300000-0xff3fffff] has been reserved
[    0.141568] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141617] pnp 00:09: [io  0x0060]
[    0.141620] pnp 00:09: [io  0x0064]
[    0.141626] pnp 00:09: [irq 1]
[    0.141675] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.141739] pnp 00:0a: [irq 12]
[    0.141785] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.141852] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    0.141855] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    0.141922] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.141926] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.141930] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.142295] pnp 00:0c: [irq 3]
[    0.142298] pnp 00:0c: [dma 0 disabled]
[    0.142301] pnp 00:0c: [io  0x02f8-0x02ff]
[    0.142425] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.142470] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.142538] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.142542] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.142774] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.142778] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    0.142781] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.142784] pnp 00:0e: [mem 0x00100000-0x7fffffff]
[    0.142787] pnp 00:0e: [mem 0xff780000-0xffffffff]
[    0.142793] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.142798] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.142803] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.142809] pnp 00:0e: disabling [mem 0x00100000-0x7fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.142876] system 00:0e: [mem 0xff780000-0xffffffff] has been reserved
[    0.142880] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.143069] pnp: PnP ACPI: found 15 devices
[    0.143071] ACPI: ACPI bus type pnp unregistered
[    0.149963] Switching to clocksource acpi_pm
[    0.150001] PCI: max bus depth: 1 pci_try_num: 2
[    0.150044] pci 0000:00:03.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.150049] pci 0000:00:03.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.150054] pci 0000:00:03.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.150058] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.150060] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.150065] pci 0000:00:01.0:   bridge window [mem disabled]
[    0.150069] pci 0000:00:01.0:   bridge window [mem pref disabled]
[    0.150076] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.150080] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.150086] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.150091] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.150098] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.150102] pci 0000:00:03.0:   bridge window [io  0x1000-0x1fff]
[    0.150108] pci 0000:00:03.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.150113] pci 0000:00:03.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.150121] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[    0.150123] pci 0000:00:13.0:   bridge window [io  disabled]
[    0.150128] pci 0000:00:13.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.150132] pci 0000:00:13.0:   bridge window [mem pref disabled]
[    0.150147] pci 0000:00:01.0: setting latency timer to 64
[    0.150169] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    0.150174] pci 0000:00:02.0: setting latency timer to 64
[    0.150181] pci 0000:00:03.0: enabling device (0100 -> 0103)
[    0.150189] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[    0.150195] pci 0000:00:03.0: setting latency timer to 64
[    0.150202] pci 0000:00:13.0: setting latency timer to 64
[    0.150207] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.150210] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.150213] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
[    0.150216] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.150219] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbefffff]
[    0.150223] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.150226] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.150229] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
[    0.150232] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.150236] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.150344] NET: Registered protocol family 2
[    0.150492] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.151542] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.151542] Switched to NOHz mode on CPU #0
[    0.152080] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.152706] TCP: Hash tables configured (established 262144 bind 65536)
[    0.152709] TCP reno registered
[    0.152724] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.152754] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.152948] NET: Registered protocol family 1
[    0.152963] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.152989] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.152995] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[    0.153115] pci 0000:02:00.0: Boot video device
[    0.153122] PCI: CLS 64 bytes, default 64
[    0.153187] Unpacking initramfs...
[    0.462842] Freeing initrd memory: 9900k freed
[    0.468987] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[    0.472727] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    0.473145] audit: initializing netlink socket (disabled)
[    0.473159] type=2000 audit(1313836858.472:1): initialized
[    0.496874] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.511779] VFS: Disk quotas dquot_6.5.2
[    0.511828] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.511918] msgmni has been set to 4021
[    0.512120] alg: No test for stdrng (krng)
[    0.512163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.512167] io scheduler noop registered
[    0.512170] io scheduler deadline registered
[    0.512197] io scheduler cfq registered (default)
[    0.512394] pcieport 0000:00:02.0: setting latency timer to 64
[    0.512510] pcieport 0000:00:03.0: setting latency timer to 64
[    0.512765] ERST: Table is not found!
[    0.512856] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.533227] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.553832] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.554037] Linux agpgart interface v0.103
[    0.554175] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.554581] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.554589] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.554734] mousedev: PS/2 mouse device common for all mice
[    0.554788] rtc_cmos 00:02: RTC can wake from S4
[    0.554940] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.554973] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.554989] cpuidle: using governor ladder
[    0.554991] cpuidle: using governor menu
[    0.555278] TCP cubic registered
[    0.555368] NET: Registered protocol family 10
[    0.556105] Mobile IPv6
[    0.556108] NET: Registered protocol family 17
[    0.556114] Registering the dns_resolver key type
[    0.556265] PM: Hibernation image not present or could not be loaded.
[    0.556278] registered taskstats version 1
[    0.564130] rtc_cmos 00:02: setting system clock to 2011-08-20 10:40:59 UTC (1313836859)
[    0.564174] Initializing network drop monitor service
[    0.565745] Freeing unused kernel memory: 560k freed
[    0.566003] Write protecting the kernel read-only data: 6144k
[    0.570617] Freeing unused kernel memory: 756k freed
[    0.575048] Freeing unused kernel memory: 740k freed
[    0.584110] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.596207] udevd[48]: starting version 172
[    0.712940] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    0.715249] usbcore: registered new interface driver usbfs
[    0.715278] usbcore: registered new interface driver hub
[    0.727120] SCSI subsystem initialized
[    0.728102] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.728705] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1a400, 00:18:f3:0b:17:0a, IRQ 23
[    0.729420] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1
[    0.730490] usbcore: registered new device driver usb
[    0.731223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.736905] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.736929] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.736960] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.737019] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdbfffc00
[    0.748875] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.748911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.748915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.748918] usb usb1: Product: EHCI Host Controller
[    0.748921] usb usb1: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
[    0.748924] usb usb1: SerialNumber: 0000:00:10.4
[    0.749101] hub 1-0:1.0: USB hub found
[    0.749107] hub 1-0:1.0: 8 ports detected
[    0.749804] uhci_hcd: USB Universal Host Controller Interface driver
[    0.752609] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.752622] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.752644] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.752689] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b800
[    0.752741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.752745] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.752748] usb usb2: Product: UHCI Host Controller
[    0.752751] usb usb2: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[    0.752754] usb usb2: SerialNumber: 0000:00:10.0
[    0.752905] hub 2-0:1.0: USB hub found
[    0.752911] hub 2-0:1.0: 2 ports detected
[    0.762409] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.762422] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.762441] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.762490] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b400
[    0.762544] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.762548] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.762551] usb usb3: Product: UHCI Host Controller
[    0.762554] usb usb3: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[    0.762557] usb usb3: SerialNumber: 0000:00:10.1
[    0.762706] hub 3-0:1.0: USB hub found
[    0.762711] hub 3-0:1.0: 2 ports detected
[    0.782185] Floppy drive(s): fd0 is 1.44M
[    0.787525] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.787538] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.787555] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.787588] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b000
[    0.787642] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.787646] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.787649] usb usb4: Product: UHCI Host Controller
[    0.787652] usb usb4: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[    0.787655] usb usb4: SerialNumber: 0000:00:10.2
[    0.787803] hub 4-0:1.0: USB hub found
[    0.787809] hub 4-0:1.0: 2 ports detected
[    0.795099] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.795112] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.795136] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.795185] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000a800
[    0.795236] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.795240] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.795243] usb usb5: Product: UHCI Host Controller
[    0.795246] usb usb5: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[    0.795248] usb usb5: SerialNumber: 0000:00:10.3
[    0.795394] hub 5-0:1.0: USB hub found
[    0.795400] hub 5-0:1.0: 2 ports detected
[    0.799605] libata version 3.00 loaded.
[    0.804443] FDC 0 is a post-1991 82077
[    0.804506] sata_via 0000:00:0f.0: version 2.6
[    0.804521] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.804567] sata_via 0000:00:0f.0: routed to hard irq line 11
[    0.810967] scsi0 : sata_via
[    0.815532] scsi1 : sata_via
[    0.817414] ata1: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 21
[    0.817418] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 21
[    0.821174] pata_via 0000:00:0f.1: version 0.3.4
[    0.825715] scsi2 : pata_via
[    0.829361] scsi3 : pata_via
[    0.831399] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.831403] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.004450] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66
[    1.004458] ata3.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
[    1.004463] ata3.00: limited to UDMA/33 due to 40-wire cable
[    1.020277] ata3.00: configured for UDMA/33
[    1.024014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.036212] ata3.01: configured for UDMA/33
[    1.189201] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[    1.189205] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.205224] ata1.00: configured for UDMA/133
[    1.205343] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[    1.408013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.572190] ata2.00: ATA-7: WDC WD2500JS-60NCB1, 10.02E02, max UDMA/100
[    1.572194] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.588189] ata2.00: configured for UDMA/100
[    1.588268] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5
[    1.590227] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5
[    1.598487] scsi 2:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
[    1.777713] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.777769] sd 0:0:0:0: [sda] Write Protect is off
[    1.777773] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.777797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.778383] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.778435] sd 1:0:0:0: [sdb] Write Protect is off
[    1.778439] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.778462] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.781057] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.781061] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.781439] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.790480] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.790853] sr 2:0:1:0: Attached scsi CD-ROM sr1
[    1.791784]  sdb: sdb1
[    1.792160] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.820707]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.821251] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.825504] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.825576] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.825648] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.825718] sr 2:0:1:0: Attached scsi generic sg3 type 5
[    2.503368] PM: Starting manual resume from disk
[    2.503373] PM: Hibernation image partition 8:5 present
[    2.503376] PM: Looking for hibernation image.
[    2.503612] PM: Image not found (code -22)
[    2.503615] PM: Hibernation image not present or could not be loaded.
[    2.564799] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.982204] udevd[282]: starting version 172
[    4.700554] ACPI: acpi_idle registered with cpuidle
[    4.754013] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.768780] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.768789] ACPI: Power Button [PWRB]
[    4.768861] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.768867] ACPI: Power Button [PWRF]
[    4.777554] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.987184] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.026250] parport_pc 00:06: reported by Plug and Play ACPI
[    5.026348] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    5.079428] MCE: In-kernel MCE decoding enabled.
[    5.092073] Linux media interface: v0.10
[    5.099912] Linux video capture interface: v2.00
[    5.407381] EDAC MC: Ver: 2.1.0
[    5.461577] AMD64 EDAC driver v3.4.0
[    5.461921] EDAC amd64: DRAM ECC disabled.
[    5.461926] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    5.461928]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    5.461930]  (Note that use of the override may cause unknown side effects.)
[    5.875773] Disabling lock debugging due to kernel taint
[    5.875782] nvidia: module license 'NVIDIA' taints kernel.
[    7.988264] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[    7.988278] nvidia 0000:02:00.0: setting latency timer to 64
[    7.988285] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    7.988865] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
[    8.050600] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    8.227390] IR NEC protocol handler initialized
[    8.249261] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[    8.249812] cx8800 0000:00:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.251687] IR RC5(x) protocol handler initialized
[    8.251983] cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected], frontend(s): 1
[    8.251987] cx88[0]: TV tuner type 63, Radio tuner type -1
[    8.258050] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
[    8.303887] IR RC6 protocol handler initialized
[    8.374431] IR JVC protocol handler initialized
[    8.399950] i2c-core: driver [tuner] using legacy suspend method
[    8.399954] i2c-core: driver [tuner] using legacy resume method
[    8.445938] IR Sony protocol handler initialized
[    8.446998] cx2388x alsa driver version 0.0.8 loaded
[    8.453814] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.453821] hda_intel: position_fix set to 1 for device 1043:81e7
[    8.453872] HDA Intel 0000:04:01.0: setting latency timer to 64
[    8.453878] HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device
[    8.469352] lirc_dev: IR Remote Control driver registered, major 251 
[    8.470196] IR LIRC bridge handler initialized
[    8.470852] tda9887 1-0043: creating new instance
[    8.470856] tda9887 1-0043: tda988[5/6/7] found
[    8.471614] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
[    8.474146] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[    8.510665] tveeprom 1-0050: Hauppauge model 94009, rev C2A0, serial# 274804
[    8.510669] tveeprom 1-0050: MAC address is 00:0d:fe:04:31:74
[    8.510673] tveeprom 1-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
[    8.510677] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[    8.510681] tveeprom 1-0050: audio processor is CX882 (idx 33)
[    8.510685] tveeprom 1-0050: decoder processor is CX882 (idx 25)
[    8.510688] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
[    8.510691] cx88[0]: hauppauge eeprom: model=94009
[    8.524566] tuner-simple 1-0061: creating new instance
[    8.524571] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[    8.563987] hda_codec: ALC660: BIOS auto-probing.
[    8.565378] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/input/input5
[    8.580061] Registered IR keymap rc-hauppauge
[    8.580211] input: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:0c.0/rc/rc0/input6
[    8.580283] rc0: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:0c.0/rc/rc0
[    8.582380] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[    8.582389] cx88[0]/0: found at 0000:00:0c.0, rev: 5, irq: 17, latency: 64, mmio: 0xdf000000
[    8.585635] cx88[0]/0: registered device video0 [v4l2]
[    8.585702] cx88[0]/0: registered device vbi0
[    8.585762] cx88[0]/0: registered device radio0
[    8.596368] cx88[0]/2: cx2388x 8802 Driver Manager
[    8.596386] cx88-mpeg driver manager 0000:00:0c.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.596394] cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 17, latency: 64, mmio: 0xdd000000
[    8.597477] cx88_audio 0000:00:0c.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.597514] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[    8.800681] cx88/2: cx2388x dvb driver version 0.0.8 loaded
[    8.800686] cx88/2: registering cx8802 driver, type: dvb access: shared
[    8.800690] cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
[    8.800695] cx88[0]/2: cx2388x based DVB/ATSC card
[    8.800697] cx8802_alloc_frontends() allocating 1 frontend(s)
[    9.012262] tuner-simple 1-0061: attaching existing instance
[    9.012267] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[    9.016140] DVB: registering new adapter (cx88[0])
[    9.016146] DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
[   10.171182] Adding 7811068k swap on /dev/sda5.  Priority:-1 extents:1 across:7811068k 
[   10.176068] EXT4-fs (sda2): re-mounted. Opts: (null)
[   10.674424] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   10.839185] loop: module loaded
[   12.434990] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.511328] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   12.545779] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   12.675251] fuse init (API version 7.16)
[   16.921896] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   27.689536] lp0: using parport0 (interrupt-driven).
[   27.760885] ppdev: user-space parallel port driver
[   27.792011] eth0: no IPv6 routers present
[   34.155988] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[   34.156088] powernow-k8: fid 0xc (2000 MHz), vid 0x6
[   34.156091] powernow-k8: fid 0xa (1800 MHz), vid 0x8
[   34.156093] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   37.172960] vboxdrv: Found 1 processor cores.
[   37.178078] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   37.178086] vboxdrv: Successfully loaded version 4.0.12 (interface 0x00180000).
[   42.778469] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   43.312070] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   43.396279] EXT4-fs (sda7): re-mounted. Opts: commit=0
[   43.509836] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[14162.444621] exe (11736): /proc/11736/oom_adj is deprecated, please use /proc/11736/oom_score_adj instead.

Reply to: