Bug#637392: linux-image-2.6.32-5-amd64: [drm:r600_audio_bits_per_sample] *ERROR* Unknown bits per sample 0xf using 16 instead
Hello,
Unfortunately, my problems did not went away with 3.0.0-1-rt-amd64. I am still having the same problem with screen going randomly off (problem 1) and also I am unable to halt my system (problem 2).
This time I am getting lucky, because for two "crashes" of radeon driver I have nice stack trace, which is much more informative than before. Please see files attached.
Now I can't really use my machine because panics are getting annoying ... What I can also do is to try to compile kernel in debug (if it's possible) and try to see more verbose stack trace. I am open to suggestions on how to provide you more diagnostic information about the problem.
Speaking about "problem 2". When I do "sudo shutdown -h now" I see "Will now halt." and nothing happens after this line. Fans are spinning, everything is working and machine does not halt" ... Should I register another bug for this?
Thanks,
--
with best regards, Volodymyr
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-rt-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP PREEMPT RT Sun Jul 24 03:57:06 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64 root=UUID=b88c9b9a-8744-4408-a480-58770bb6671d ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer P5QL PRO/P5QL PRO, BIOS 1004 07/01/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ cff7a000-cff80000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffa000-130000000
[ 0.000000] RAMDISK: 374cc000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbb10 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff80000 00040 (v01 A_M_I_ OEMRSDT 07000901 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 07000901 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 08888 (v01 A1014 A1014001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 07000901 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 07000901 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 07000901 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff88cd0 00038 (v01 A_M_I_ OEMHPET 07000901 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff88d10 000B0 (v01 A_M_I_ OEMOSFR 07000901 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8e8d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048335
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 105 pages/cpu @ffff88012fc00000 s400640 r8192 d21248 u524288
[ 0.000000] pcpu-alloc: s400640 r8192 d21248 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031306
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64 root=UUID=b88c9b9a-8744-4408-a480-58770bb6671d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4045456k/4980736k available (3419k kernel code, 787396k absent, 147884k reserved, 3307k data, 884k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2497.890 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4995.78 BogoMIPS (lpj=9991560)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004149] Security Framework initialized
[ 0.004153] SELinux: Disabled at boot.
[ 0.004923] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008715] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009512] Mount-cache hash table entries: 256
[ 0.009786] Initializing cgroup subsys cpuacct
[ 0.009791] Initializing cgroup subsys memory
[ 0.009814] Initializing cgroup subsys devices
[ 0.009817] Initializing cgroup subsys freezer
[ 0.009819] Initializing cgroup subsys net_cls
[ 0.009821] Initializing cgroup subsys blkio
[ 0.009901] CPU: Physical Processor ID: 0
[ 0.009902] CPU: Processor Core ID: 0
[ 0.009904] mce: CPU supports 6 MCE banks
[ 0.009911] CPU0: Thermal monitoring enabled (TM2)
[ 0.009917] using mwait in idle threads.
[ 0.010269] ACPI: Core revision 20110413
[ 0.028220] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068513] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.072003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.084184] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.104043] Booting Node 0, Processors #1
[ 0.104046] smpboot cpu 1: start_ip = 9a000
[ 0.196054] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.212080] #2
[ 0.212081] smpboot cpu 2: start_ip = 9a000
[ 0.304041] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.320071] #3 Ok.
[ 0.320073] smpboot cpu 3: start_ip = 9a000
[ 0.412050] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.416036] Brought up 4 CPUs
[ 0.416039] Total of 4 processors activated (19980.39 BogoMIPS).
[ 0.418401] devtmpfs: initialized
[ 0.422184] PM: Registering ACPI NVS region at cff8e000 (270336 bytes)
[ 0.422184] print_constraints: dummy:
[ 0.422184] NET: Registered protocol family 16
[ 0.422184] ACPI: bus type pci registered
[ 0.422184] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.422184] PCI: not using MMCONFIG
[ 0.422184] PCI: Using configuration type 1 for base access
[ 0.424545] bio: create slab <bio-0> at 0
[ 0.425530] ACPI: EC: Look up EC in DSDT
[ 0.428605] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.454010] ACPI: SSDT 00000000cff8e0d0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.454409] ACPI: Dynamic OEM Table Load:
[ 0.454411] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.455724] ACPI: SSDT 00000000cff8e2d0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.456138] ACPI: Dynamic OEM Table Load:
[ 0.456140] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.457450] ACPI: SSDT 00000000cff8e4d0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.457845] ACPI: Dynamic OEM Table Load:
[ 0.457847] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.459162] ACPI: SSDT 00000000cff8e6d0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.459558] ACPI: Dynamic OEM Table Load:
[ 0.459560] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.460211] ACPI: Interpreter enabled
[ 0.460214] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.460294] ACPI: Using IOAPIC for interrupt routing
[ 0.460354] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.463621] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.568815] ACPI: No dock devices found.
[ 0.568817] HEST: Table not found.
[ 0.568819] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.569020] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.569460] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.569463] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.569465] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.569467] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.569469] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.569487] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.569525] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.569552] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.569555] pci 0000:00:01.0: PME# disabled
[ 0.569593] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.569630] pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
[ 0.569673] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.569710] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
[ 0.569753] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.569790] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
[ 0.569840] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.569858] pci 0000:00:1a.7: reg 10: [mem 0xfe8ffc00-0xfe8fffff]
[ 0.569923] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.569927] pci 0000:00:1a.7: PME# disabled
[ 0.569950] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.569963] pci 0000:00:1b.0: reg 10: [mem 0xfe8f8000-0xfe8fbfff 64bit]
[ 0.570011] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.570014] pci 0000:00:1b.0: PME# disabled
[ 0.570035] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.570083] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.570086] pci 0000:00:1c.0: PME# disabled
[ 0.570110] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.570157] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.570161] pci 0000:00:1c.4: PME# disabled
[ 0.570182] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.570230] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.570233] pci 0000:00:1c.5: PME# disabled
[ 0.570257] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.570294] pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
[ 0.570336] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.570373] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
[ 0.570418] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.570454] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
[ 0.570505] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.570523] pci 0000:00:1d.7: reg 10: [mem 0xfe8ff800-0xfe8ffbff]
[ 0.570588] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.570591] pci 0000:00:1d.7: PME# disabled
[ 0.570612] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.570665] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.570764] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.570777] pci 0000:00:1f.2: reg 10: [io 0xa000-0xa007]
[ 0.570783] pci 0000:00:1f.2: reg 14: [io 0x9c00-0x9c03]
[ 0.570790] pci 0000:00:1f.2: reg 18: [io 0x9880-0x9887]
[ 0.570797] pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803]
[ 0.570803] pci 0000:00:1f.2: reg 20: [io 0x9480-0x948f]
[ 0.570810] pci 0000:00:1f.2: reg 24: [io 0x9400-0x940f]
[ 0.570846] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.570859] pci 0000:00:1f.3: reg 10: [mem 0xfe8ff400-0xfe8ff4ff 64bit]
[ 0.570877] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.570910] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.570923] pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007]
[ 0.570930] pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03]
[ 0.570937] pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887]
[ 0.570943] pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803]
[ 0.570950] pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f]
[ 0.570957] pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f]
[ 0.571017] pci 0000:01:00.0: [1002:9598] type 0 class 0x000300
[ 0.571029] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.571039] pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9effff 64bit]
[ 0.571045] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
[ 0.571057] pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.571074] pci 0000:01:00.0: supports D1 D2
[ 0.571094] pci 0000:01:00.1: [1002:aa20] type 0 class 0x000403
[ 0.571106] pci 0000:01:00.1: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.571147] pci 0000:01:00.1: supports D1 D2
[ 0.571174] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.571176] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.571179] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.571182] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.571220] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.571223] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.571227] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.571232] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.571285] pci 0000:03:00.0: [11ab:6101] type 0 class 0x000101
[ 0.571300] pci 0000:03:00.0: reg 10: [io 0xec00-0xec07]
[ 0.571311] pci 0000:03:00.0: reg 14: [io 0xe880-0xe883]
[ 0.571322] pci 0000:03:00.0: reg 18: [io 0xe800-0xe807]
[ 0.571332] pci 0000:03:00.0: reg 1c: [io 0xe480-0xe483]
[ 0.571343] pci 0000:03:00.0: reg 20: [io 0xe400-0xe40f]
[ 0.571354] pci 0000:03:00.0: reg 24: [mem 0xfebffc00-0xfebffdff]
[ 0.571396] pci 0000:03:00.0: supports D1
[ 0.571397] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.571401] pci 0000:03:00.0: PME# disabled
[ 0.571417] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.571426] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.571429] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.571432] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.571437] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.571494] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
[ 0.571515] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.571526] pci 0000:02:00.0: reg 18: [io 0xdc00-0xdc7f]
[ 0.571596] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.571600] pci 0000:02:00.0: PME# disabled
[ 0.571619] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.571628] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.571631] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.571634] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.571639] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.571693] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.571697] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.571700] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.571705] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.571708] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.571711] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.571714] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.571716] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.571719] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.571739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.572532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.572697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.573143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.573303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.573540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.573687] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.573691] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.573693] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.614783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.614920] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.615056] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.615191] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.615326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.615462] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.615597] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.615732] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.616016] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.616049] vgaarb: loaded
[ 0.616050] vgaarb: bridge control possible 0000:01:00.0
[ 0.616169] PCI: Using ACPI for IRQ routing
[ 0.621321] PCI: pci_cache_line_size set to 64 bytes
[ 0.621525] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.621530] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.621790] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.621797] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.621801] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.636126] Switching to clocksource hpet
[ 0.639805] Switched to NOHz mode on CPU #0
[ 0.639849] Switched to NOHz mode on CPU #1
[ 0.639891] Switched to NOHz mode on CPU #2
[ 0.639903] Switched to NOHz mode on CPU #3
[ 0.642697] pnp: PnP ACPI init
[ 0.642721] ACPI: bus type pnp registered
[ 0.642932] pnp 00:00: [bus 00-ff]
[ 0.642939] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.642941] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.642944] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.642946] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.642949] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.642951] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.643049] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.643078] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.643218] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.643222] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.643311] pnp 00:02: [dma 4]
[ 0.643314] pnp 00:02: [io 0x0000-0x000f]
[ 0.643316] pnp 00:02: [io 0x0081-0x0083]
[ 0.643318] pnp 00:02: [io 0x0087]
[ 0.643321] pnp 00:02: [io 0x0089-0x008b]
[ 0.643323] pnp 00:02: [io 0x008f]
[ 0.643325] pnp 00:02: [io 0x00c0-0x00df]
[ 0.643383] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.643414] pnp 00:03: [io 0x0070-0x0071]
[ 0.643424] pnp 00:03: [irq 8]
[ 0.643489] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.643511] pnp 00:04: [io 0x0061]
[ 0.643570] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.643596] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.643601] pnp 00:05: [irq 13]
[ 0.643662] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.644401] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.644404] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.644406] pnp 00:06: [io 0x0290-0x029f]
[ 0.644552] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.644556] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.644917] pnp 00:07: [io 0x0010-0x001f]
[ 0.644919] pnp 00:07: [io 0x0022-0x003f]
[ 0.644921] pnp 00:07: [io 0x0044-0x004d]
[ 0.644923] pnp 00:07: [io 0x0050-0x005f]
[ 0.644926] pnp 00:07: [io 0x0062-0x0063]
[ 0.644928] pnp 00:07: [io 0x0065-0x006f]
[ 0.644930] pnp 00:07: [io 0x0072-0x007f]
[ 0.644932] pnp 00:07: [io 0x0080]
[ 0.644937] pnp 00:07: [io 0x0084-0x0086]
[ 0.644939] pnp 00:07: [io 0x0088]
[ 0.644941] pnp 00:07: [io 0x008c-0x008e]
[ 0.644943] pnp 00:07: [io 0x0090-0x009f]
[ 0.644945] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.644947] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.644950] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.644952] pnp 00:07: [io 0x0800-0x087f]
[ 0.644954] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.644956] pnp 00:07: [io 0x0500-0x057f]
[ 0.644958] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.644961] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.644963] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.644965] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.645129] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.645133] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.645137] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.645141] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.645145] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.645149] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.645155] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.645160] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.645377] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.645447] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.645630] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.645632] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.645697] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.645836] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.645980] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.645984] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.646401] pnp 00:0b: [io 0x0060]
[ 0.646404] pnp 00:0b: [io 0x0064]
[ 0.646406] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.646408] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.646559] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.646563] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.646567] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.647720] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.647727] pnp 00:0c: [irq 4]
[ 0.647729] pnp 00:0c: [dma 0 disabled]
[ 0.647868] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.647977] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.648148] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.648153] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.648704] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.648707] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.648709] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.648712] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.648714] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.648882] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.648887] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.648892] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.648896] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.648901] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.649341] pnp: PnP ACPI: found 15 devices
[ 0.649342] ACPI: ACPI bus type pnp unregistered
[ 0.658192] PCI: max bus depth: 1 pci_try_num: 2
[ 0.658230] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.658235] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.658240] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0400000-0xf07fffff]
[ 0.658244] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.658250] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.658252] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.658255] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.658258] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.658261] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.658264] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.658268] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf07fffff]
[ 0.658271] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.658276] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.658279] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.658283] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.658286] pci 0000:00:1c.4: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.658291] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.658293] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.658297] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.658301] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.658306] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.658307] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.658311] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.658314] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.658330] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.658334] pci 0000:00:01.0: setting latency timer to 64
[ 0.658338] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.658347] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.658350] pci 0000:00:1c.0: setting latency timer to 64
[ 0.658356] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.658359] pci 0000:00:1c.4: setting latency timer to 64
[ 0.658365] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.658368] pci 0000:00:1c.5: setting latency timer to 64
[ 0.658373] pci 0000:00:1e.0: setting latency timer to 64
[ 0.658376] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.658378] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.658380] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.658382] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.658383] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.658386] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.658387] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.658389] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.658391] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.658393] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf07fffff]
[ 0.658395] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.658397] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.658399] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.658401] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.658403] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.658404] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.658406] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.658408] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.658410] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.658412] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.658413] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.658415] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.658564] NET: Registered protocol family 2
[ 0.658982] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.661820] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.665827] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.667152] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.667156] TCP reno registered
[ 0.667229] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.667390] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.667770] NET: Registered protocol family 1
[ 0.668079] pci 0000:01:00.0: Boot video device
[ 0.668097] PCI: CLS 32 bytes, default 64
[ 0.668220] Unpacking initramfs...
[ 0.940102] Freeing initrd memory: 11408k freed
[ 0.944885] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.944890] Placing 64MB software IO TLB between ffff8800cbf7a000 - ffff8800cff7a000
[ 0.944891] software IO TLB at phys 0xcbf7a000 - 0xcff7a000
[ 0.946046] audit: initializing netlink socket (disabled)
[ 0.946071] type=2000 audit(1313439468.940:1): initialized
[ 0.970276] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.989500] VFS: Disk quotas dquot_6.5.2
[ 0.989618] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.989784] msgmni has been set to 7923
[ 0.990278] alg: No test for stdrng (krng)
[ 0.990350] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.990353] io scheduler noop registered
[ 0.990355] io scheduler deadline registered
[ 0.990392] io scheduler cfq registered (default)
[ 0.990662] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.990691] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.990771] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.990804] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.990884] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.990917] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.991001] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.991033] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.991452] ERST: Table is not found!
[ 0.991579] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.011978] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.296595] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.340427] Linux agpgart interface v0.103
[ 1.341395] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.344139] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.344149] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.344367] mousedev: PS/2 mouse device common for all mice
[ 1.344431] rtc_cmos 00:03: RTC can wake from S4
[ 1.344592] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.344682] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.344723] cpuidle: using governor ladder
[ 1.344724] cpuidle: using governor menu
[ 1.345824] TCP cubic registered
[ 1.345925] NET: Registered protocol family 10
[ 1.348326] Mobile IPv6
[ 1.348330] NET: Registered protocol family 17
[ 1.348336] Registering the dns_resolver key type
[ 1.348567] PM: Hibernation image not present or could not be loaded.
[ 1.348597] registered taskstats version 1
[ 1.358608] rtc_cmos 00:03: setting system clock to 2011-08-15 20:17:49 UTC (1313439469)
[ 1.358691] Initializing network drop monitor service
[ 1.360931] Freeing unused kernel memory: 884k freed
[ 1.361192] Write protecting the kernel read-only data: 6144k
[ 1.363892] Freeing unused kernel memory: 660k freed
[ 1.366982] Freeing unused kernel memory: 720k freed
[ 1.387157] udevd[66]: starting version 172
[ 1.427355] usbcore: registered new interface driver usbfs
[ 1.428098] usbcore: registered new interface driver hub
[ 1.428799] usbcore: registered new device driver usb
[ 1.432563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.432724] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.432748] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.432752] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.432841] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.432885] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.436776] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.436867] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00
[ 1.452049] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.452277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.452279] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452281] usb usb1: Product: EHCI Host Controller
[ 1.452283] usb usb1: Manufacturer: Linux 3.0.0-1-rt-amd64 ehci_hcd
[ 1.452284] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.459509] hub 1-0:1.0: USB hub found
[ 1.459523] hub 1-0:1.0: 6 ports detected
[ 1.462087] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.462116] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.462120] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.462504] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.462549] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.466436] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.466558] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800
[ 1.480099] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.480212] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.480215] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480217] usb usb2: Product: EHCI Host Controller
[ 1.480219] usb usb2: Manufacturer: Linux 3.0.0-1-rt-amd64 ehci_hcd
[ 1.480220] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.488312] hub 2-0:1.0: USB hub found
[ 1.488326] hub 2-0:1.0: 6 ports detected
[ 1.493617] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.493726] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.494933] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.495282] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.495297] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.495300] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.495404] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.495539] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.495638] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.495645] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.495647] usb usb3: Product: UHCI Host Controller
[ 1.495649] usb usb3: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.495650] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.501704] hub 3-0:1.0: USB hub found
[ 1.501717] hub 3-0:1.0: 2 ports detected
[ 1.505571] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.505581] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.505584] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.505651] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.505771] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.505858] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.505860] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.505862] usb usb4: Product: UHCI Host Controller
[ 1.505863] usb usb4: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.505865] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.506240] SCSI subsystem initialized
[ 1.510161] hub 4-0:1.0: USB hub found
[ 1.510174] hub 4-0:1.0: 2 ports detected
[ 1.512854] libata version 3.00 loaded.
[ 1.513713] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.513723] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.513726] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.513798] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.513884] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 1.513971] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.513973] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.513975] usb usb5: Product: UHCI Host Controller
[ 1.513977] usb usb5: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.513978] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.515358] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.515403] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.519147] hub 5-0:1.0: USB hub found
[ 1.519159] hub 5-0:1.0: 2 ports detected
[ 1.523625] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.523639] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.523646] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.523767] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.523865] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.523956] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.523959] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.523960] usb usb6: Product: UHCI Host Controller
[ 1.523962] usb usb6: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.523964] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.529699] hub 6-0:1.0: USB hub found
[ 1.529711] hub 6-0:1.0: 2 ports detected
[ 1.533336] ata_piix 0000:00:1f.2: version 2.13
[ 1.533372] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.533383] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.533459] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.535034] scsi0 : pata_marvell
[ 1.539595] scsi1 : pata_marvell
[ 1.543164] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.543166] ata2: DUMMY
[ 1.553188] scsi2 : ata_piix
[ 1.556432] scsi3 : ata_piix
[ 1.566618] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 1.566623] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 1.566968] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.566984] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.566992] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.567062] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.567161] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.567254] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.567256] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.567258] usb usb7: Product: UHCI Host Controller
[ 1.567260] usb usb7: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.567261] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.572535] hub 7-0:1.0: USB hub found
[ 1.572547] hub 7-0:1.0: 2 ports detected
[ 1.576135] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.576146] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.576217] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.590348] scsi4 : ata_piix
[ 1.593167] scsi5 : ata_piix
[ 1.602201] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 1.602205] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 1.602476] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.602486] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.602488] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.602555] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.602627] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.602715] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.602717] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.602719] usb usb8: Product: UHCI Host Controller
[ 1.602720] usb usb8: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.602722] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.609599] hub 8-0:1.0: USB hub found
[ 1.609621] hub 8-0:1.0: 2 ports detected
[ 1.713845] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.715650] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.717489] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.719294] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.721134] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.721140] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 1.925833] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.927648] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.929484] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.930849] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.931304] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.933141] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.933146] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 1.941542] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.944018] Refined TSC clocksource calibration: 2497.499 MHz.
[ 1.944023] Switching to clocksource tsc
[ 2.137844] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.139649] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.141480] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.143284] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.145117] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.145122] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.349820] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.351625] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.353447] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.355251] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.357072] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.357077] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.360062] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.360072] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 2.360196] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.360212] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 2.360222] ata4.01: link offline, clearing class 3 to NONE
[ 2.368293] ata4.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66
[ 2.369015] ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 2.369018] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.384235] ata4.00: configured for UDMA/66
[ 2.385023] ata3.00: configured for UDMA/133
[ 2.385208] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 2.386155] scsi 3:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5
[ 2.420143] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.420252] sd 2:0:0:0: [sda] Write Protect is off
[ 2.420255] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.420299] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.423176] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.423180] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.423872] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.479164] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.479923] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.486151] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.486267] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.561846] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.563652] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.565485] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.567379] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.569208] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.569214] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.569216] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2.625880] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.627685] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.629519] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.631405] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.633296] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.633302] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.837841] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.839647] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.841481] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.843285] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.845118] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.845124] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.049823] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.051628] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.053462] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.055266] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.057100] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.057105] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.261823] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.263628] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.265450] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.267254] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.269095] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.269101] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.473818] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.475622] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.477443] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.479247] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.481100] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.481105] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.481107] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 3.537833] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.539639] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.541472] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.543277] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.545110] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.545115] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.749906] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.751712] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.753539] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.755345] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.757168] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.757173] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.804049] PM: Starting manual resume from disk
[ 3.804051] PM: Hibernation image partition 8:7 present
[ 3.804052] PM: Looking for hibernation image.
[ 3.804246] PM: Image not found (code -22)
[ 3.804248] PM: Hibernation image not present or could not be loaded.
[ 3.867698] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.961832] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.963637] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.965472] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.967276] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.969107] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.969113] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.173908] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.175734] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.177578] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.179397] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.181228] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.181234] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.385833] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.387639] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.389527] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.391331] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.393172] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.393178] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.393180] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 4.449844] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.451756] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.453588] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.455397] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.457343] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.457349] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.661887] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.663693] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.665525] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.667330] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.669200] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.669206] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.873830] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.875635] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.877469] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.879273] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.881104] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.881109] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.085842] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.087648] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.089538] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.091343] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.093176] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.093182] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.297892] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.299698] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.301546] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.303350] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.305187] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.305193] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.305195] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 5.305212] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 5.428042] usb 2-3: new high speed USB device number 2 using ehci_hcd
[ 5.573250] udevd[295]: starting version 172
[ 5.588864] usb 2-3: New USB device found, idVendor=145f, idProduct=0142
[ 5.588867] usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 5.588869] usb 2-3: Product: Trust Webcam
[ 5.588871] usb 2-3: Manufacturer:
[ 6.056032] usb 7-2: new full speed USB device number 2 using uhci_hcd
[ 6.211290] usb 7-2: New USB device found, idVendor=045e, idProduct=070f
[ 6.211294] usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.211300] usb 7-2: Product: Microsoft LifeChat LX-3000
[ 6.272030] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 6.272038] ACPI: Power Button [PWRB]
[ 6.274978] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 6.275914] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.275921] ACPI: Power Button [PWRF]
[ 6.354628] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.397566] ACPI: acpi_idle registered with cpuidle
[ 6.481859] [drm] Initialized drm 1.1.0 20060810
[ 6.504048] usb 8-1: new low speed USB device number 2 using uhci_hcd
[ 6.508799] Linux media interface: v0.10
[ 6.691210] Linux video capture interface: v2.00
[ 6.747714] uvcvideo: Found UVC 1.00 device Trust Webcam (145f:0142)
[ 6.754556] input: Trust Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input3
[ 6.754678] usbcore: registered new interface driver uvcvideo
[ 6.754679] USB Video Class driver (v1.1.0)
[ 6.760139] usb 8-1: New USB device found, idVendor=04d9, idProduct=1603
[ 6.760142] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.760144] usb 8-1: Product: USB Keyboard
[ 6.760145] usb 8-1: Manufacturer:
[ 6.822608] 2:3:1: cannot get freq at ep 0x84
[ 6.834031] [drm] radeon kernel modesetting enabled.
[ 6.834123] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.834128] radeon 0000:01:00.0: setting latency timer to 64
[ 6.834809] [drm] initializing kernel modesetting (RV635 0x1002:0x9598).
[ 6.834847] [drm] register mmio base: 0xFE9E0000
[ 6.834849] [drm] register mmio size: 65536
[ 6.834949] usbcore: registered new interface driver snd-usb-audio
[ 6.835540] ATOM BIOS: RV635PRO
[ 6.835575] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 6.835577] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 6.835584] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 6.835586] [drm] Detected VRAM RAM=512M, BAR=256M
[ 6.835588] [drm] RAM width 128bits DDR
[ 6.835798] [TTM] Zone kernel: Available graphics memory: 2029564 kiB.
[ 6.835799] [TTM] Initializing pool allocator.
[ 6.835846] [drm] radeon: 512M of VRAM memory ready
[ 6.835848] [drm] radeon: 512M of GTT memory ready.
[ 6.835893] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.835895] [drm] Driver supports precise vblank timestamp query.
[ 6.835931] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[ 6.835936] radeon 0000:01:00.0: radeon: using MSI.
[ 6.836119] [drm] radeon: irq initialized.
[ 6.836124] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.836933] [drm] Loading RV635 Microcode
[ 6.864076] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.864153] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.864265] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.004056] usb 8-2: new low speed USB device number 3 using uhci_hcd
[ 7.021784] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 7.184058] radeon 0000:01:00.0: WB enabled
[ 7.186128] usb 8-2: New USB device found, idVendor=045e, idProduct=0047
[ 7.186131] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 7.186133] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 7.186135] usb 8-2: Manufacturer: Microsoft
[ 7.216505] [drm] ring test succeeded in 1 usecs
[ 7.216949] [drm] radeon: ib pool ready.
[ 7.217202] [drm] ib test succeeded in 0 usecs
[ 7.217293] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 7.220058] [drm] Radeon Display Connectors
[ 7.220060] [drm] Connector 0:
[ 7.220061] [drm] DVI-I
[ 7.220062] [drm] HPD1
[ 7.220063] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.220065] [drm] Encoders:
[ 7.220066] [drm] DFP1: INTERNAL_UNIPHY
[ 7.220067] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.220068] [drm] Connector 1:
[ 7.220069] [drm] DIN
[ 7.220070] [drm] Encoders:
[ 7.220071] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.220072] [drm] Connector 2:
[ 7.220073] [drm] DVI-I
[ 7.220074] [drm] HPD2
[ 7.220075] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.220077] [drm] Encoders:
[ 7.220078] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.220079] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 7.281507] [drm] Internal thermal controller with fan control
[ 7.281609] [drm] radeon: power management initialized
[ 7.366702] [drm] fb mappable at 0xD0141000
[ 7.366704] [drm] vram apper at 0xD0000000
[ 7.366705] [drm] size 8294400
[ 7.366706] [drm] fb depth is 24
[ 7.366707] [drm] pitch is 7680
[ 7.366829] fbcon: radeondrmfb (fb0) is primary device
[ 7.520418] input: Microsoft LifeChat LX-3000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input5
[ 7.520581] generic-usb 0003:045E:070F.0001: input,hidraw0: USB HID v1.00 Device [Microsoft LifeChat LX-3000 ] on usb-0000:00:1d.1-2/input3
[ 7.567438] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input6
[ 7.567598] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.2-1/input0
[ 7.660275] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input7
[ 7.660474] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.2-1/input1
[ 7.676422] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input8
[ 7.676788] generic-usb 0003:045E:0047.0004: input,hidraw3: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 7.676889] usbcore: registered new interface driver usbhid
[ 7.676891] usbhid: USB HID core driver
[ 7.788913] Console: switching to colour frame buffer device 240x67
[ 7.793860] fb0: radeondrmfb frame buffer device
[ 7.793862] drm: registered panic notifier
[ 7.793869] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[ 7.793937] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.794054] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 7.794146] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.918572] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 7.919133] input: HDA ATI HDMI HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input9
[ 8.820899] Adding 2882556k swap on /dev/sda7. Priority:-1 extents:1 across:2882556k
[ 8.826769] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 8.988770] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 9.161762] loop: module loaded
[ 9.666144] fuse init (API version 7.16)
[ 11.582730] ATL1E 0000:02:00.0: irq 47 for MSI/MSI-X
[ 11.582964] ATL1E 0000:02:00.0: eth0: NIC Link is Up <1000 Mbps Full Duplex>
[ 11.583330] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.583840] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.139683] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 15.619711] Bluetooth: Core ver 2.16
[ 15.619750] NET: Registered protocol family 31
[ 15.619752] Bluetooth: HCI device and connection manager initialized
[ 15.619755] Bluetooth: HCI socket layer initialized
[ 15.619757] Bluetooth: L2CAP socket layer initialized
[ 15.619853] Bluetooth: SCO socket layer initialized
[ 15.770245] lp: driver loaded but no devices found
[ 15.790144] Bluetooth: RFCOMM TTY layer initialized
[ 15.790160] Bluetooth: RFCOMM socket layer initialized
[ 15.790162] Bluetooth: RFCOMM ver 1.11
[ 16.032821] ppdev: user-space parallel port driver
[ 16.045595] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.045602] Bluetooth: BNEP filters: protocol multicast
[ 21.968011] eth0: no IPv6 routers present
[ 38.641063] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 50.187402] 2:3:1: cannot get freq at ep 0x84
[ 6610.746290] exe (3197): /proc/3197/oom_adj is deprecated, please use /proc/3197/oom_score_adj instead.
[ 7493.020053] radeon 0000:01:00.0: GPU lockup CP stall for more than 10020msec
[ 7493.020055] ------------[ cut here ]------------
[ 7493.020077] WARNING: at /tmp/buildd/linux-2.6-3.0.0/debian/build/source_amd64_rt/drivers/gpu/drm/radeon/radeon_fence.c:267 radeon_fence_wait+0x2c1/0x340 [radeon]()
[ 7493.020080] Hardware name: P5QL PRO
[ 7493.020081] GPU lockup (waiting for 0x0002F05C last fence id 0x0002F05A)
[ 7493.020083] Modules linked in: parport_pc bnep ppdev rfcomm lp parport bluetooth rfkill acpi_cpufreq mperf cpufreq_userspace cpufreq_conservative cpufreq_stats cpufreq_powersave uinput fuse loop snd_hda_codec_hdmi usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec radeon snd_usb_audio uvcvideo snd_usbmidi_lib videodev ttm evdev snd_seq_midi snd_seq_midi_event media asus_atk0110 snd_rawmidi snd_hwdep drm_kms_helper drm snd_seq snd_pcm snd_seq_device snd_timer psmouse serio_raw processor v4l2_compat_ioctl32 i2c_i801 i2c_algo_bit power_supply thermal_sys i2c_core snd pcspkr button soundcore snd_page_alloc ext4 mbcache jbd2 crc16 sg sr_mod sd_mod cdrom crc_t10dif ata_generic ata_piix pata_marvell libata scsi_mod uhci_hcd atl1e ehci_hcd usbcore [last unloaded: scsi_wait_scan]
[ 7493.020122] Pid: 1897, comm: Xorg Not tainted 3.0.0-1-rt-amd64 #1
[ 7493.020124] Call Trace:
[ 7493.020132] [<ffffffff8104856d>] ? warn_slowpath_common+0x78/0x8c
[ 7493.020135] [<ffffffff81048622>] ? warn_slowpath_fmt+0x45/0x4a
[ 7493.020147] [<ffffffffa02cab43>] ? radeon_fence_wait+0x2c1/0x340 [radeon]
[ 7493.020151] [<ffffffff81063438>] ? wake_up_bit+0x23/0x23
[ 7493.020155] [<ffffffff81351b63>] ? sub_preempt_count+0x83/0x94
[ 7493.020160] [<ffffffffa024b695>] ? ttm_bo_wait+0xb5/0x19a [ttm]
[ 7493.020174] [<ffffffffa02db45a>] ? radeon_bo_wait+0x78/0xa8 [radeon]
[ 7493.020187] [<ffffffffa02db938>] ? radeon_gem_wait_idle_ioctl+0x32/0x61 [radeon]
[ 7493.020194] [<ffffffffa01f476d>] ? drm_ioctl+0x271/0x340 [drm]
[ 7493.020197] [<ffffffff8134f09c>] ? _raw_spin_unlock+0x26/0x38
[ 7493.020210] [<ffffffffa02db906>] ? radeon_gem_busy_ioctl+0x7e/0x7e [radeon]
[ 7493.020213] [<ffffffff8104222a>] ? migrate_enable+0x12a/0x13c
[ 7493.020216] [<ffffffff81009391>] ? do_signal+0x55e/0x640
[ 7493.020221] [<ffffffff811be22c>] ? hweight_long+0x5/0x6
[ 7493.020225] [<ffffffff81114d13>] ? do_vfs_ioctl+0x41e/0x45f
[ 7493.020228] [<ffffffff81009752>] ? sys_rt_sigreturn+0x196/0x1c4
[ 7493.020230] [<ffffffff81114d9f>] ? sys_ioctl+0x4b/0x70
[ 7493.020233] [<ffffffff813537d2>] ? system_call_fastpath+0x16/0x1b
[ 7493.020235] ---[ end trace 0000000000000002 ]---
[ 7493.021374] radeon 0000:01:00.0: GPU softreset
[ 7493.021376] radeon 0000:01:00.0: R_008010_GRBM_STATUS=0xFFFFFFFF
[ 7493.021378] radeon 0000:01:00.0: R_008014_GRBM_STATUS2=0xFFFFFFFF
[ 7493.021380] radeon 0000:01:00.0: R_000E50_SRBM_STATUS=0xFFFFFFFF
[ 7493.146174] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 7493.146177] radeon 0000:01:00.0: R_008020_GRBM_SOFT_RESET=0x00007FEE
[ 7493.160837] radeon 0000:01:00.0: R_008020_GRBM_SOFT_RESET=0x00000001
[ 7493.176471] radeon 0000:01:00.0: R_008010_GRBM_STATUS=0xFFFFFFFF
[ 7493.176473] radeon 0000:01:00.0: R_008014_GRBM_STATUS2=0xFFFFFFFF
[ 7493.176474] radeon 0000:01:00.0: R_000E50_SRBM_STATUS=0xFFFFFFFF
[ 7493.177451] radeon 0000:01:00.0: GPU reset succeed
[ 7493.424036] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 7493.545072] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 7493.547106] radeon 0000:01:00.0: WB enabled
[ 7493.577644] BUG: unable to handle kernel paging request at ffffc90411580ffc
[ 7493.577648] IP: [<ffffffffa02ede04>] radeon_ring_write+0x3e/0x5f [radeon]
[ 7493.577666] PGD 12f075067 PUD 0
[ 7493.577669] Oops: 0002 [#1] PREEMPT SMP
[ 7493.577672] CPU 1
[ 7493.577673] Modules linked in: parport_pc bnep ppdev rfcomm lp parport bluetooth rfkill acpi_cpufreq mperf cpufreq_userspace cpufreq_conservative cpufreq_stats cpufreq_powersave uinput fuse loop snd_hda_codec_hdmi usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec radeon snd_usb_audio uvcvideo snd_usbmidi_lib videodev ttm evdev snd_seq_midi snd_seq_midi_event media asus_atk0110 snd_rawmidi snd_hwdep drm_kms_helper drm snd_seq snd_pcm snd_seq_device snd_timer psmouse serio_raw processor v4l2_compat_ioctl32 i2c_i801 i2c_algo_bit power_supply thermal_sys i2c_core snd pcspkr button soundcore snd_page_alloc ext4 mbcache jbd2 crc16 sg sr_mod sd_mod cdrom crc_t10dif ata_generic ata_piix pata_marvell libata scsi_mod uhci_hcd atl1e ehci_hcd usbcore [last unloaded: scsi_wait_scan]
[ 7493.577706]
[ 7493.577708] Pid: 1897, comm: Xorg Tainted: G W 3.0.0-1-rt-amd64 #1 System manufacturer P5QL PRO/P5QL PRO
[ 7493.577711] RIP: 0010:[<ffffffffa02ede04>] [<ffffffffa02ede04>] radeon_ring_write+0x3e/0x5f [radeon]
[ 7493.577724] RSP: 0018:ffff880122a9fb58 EFLAGS: 00010286
[ 7493.577725] RAX: 0000000000000000 RBX: ffff8801273ae000 RCX: ffff88012990a810
[ 7493.577727] RDX: ffffc90411580ffc RSI: 00000000c0054400 RDI: ffff8801273ae000
[ 7493.577729] RBP: 00000000c0054400 R08: ffff880122a9e000 R09: 0000000000000000
[ 7493.577730] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000011
[ 7493.577732] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000002f05a
[ 7493.577734] FS: 00007f77545b7880(0000) GS:ffff88012fc80000(0000) knlGS:0000000000000000
[ 7493.577736] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 7493.577738] CR2: ffffc90411580ffc CR3: 00000001297df000 CR4: 00000000000006e0
[ 7493.577740] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7493.577742] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 7493.577744] Process Xorg (pid: 1897, threadinfo ffff880122a9e000, task ffff88012990a810)
[ 7493.577745] Stack:
[ 7493.577746] 00000000751b9acd ffff8801273ae000 0000000000000000 ffffffffa02f098c
[ 7493.577750] 0000000000000011 ffff8801273ae000 0000000000000911 ffffffffa02f0bc4
[ 7493.577752] ffff8801273ae000 ffffc90011367900 ffffc90011367900 ffffffffa02f23aa
[ 7493.577755] Call Trace:
[ 7493.577768] [<ffffffffa02f098c>] ? r600_cp_start+0x3f/0xb5 [radeon]
[ 7493.577779] [<ffffffffa02f0bc4>] ? r600_cp_resume+0x1c2/0x1e6 [radeon]
[ 7493.577791] [<ffffffffa02f23aa>] ? r600_startup+0x6e3/0x6f0 [radeon]
[ 7493.577802] [<ffffffffa02f23d4>] ? r600_resume+0x1d/0x7d [radeon]
[ 7493.577812] [<ffffffffa02bb402>] ? radeon_gpu_reset+0x62/0x9e [radeon]
[ 7493.577823] [<ffffffffa02cab52>] ? radeon_fence_wait+0x2d0/0x340 [radeon]
[ 7493.577828] [<ffffffff81063438>] ? wake_up_bit+0x23/0x23
[ 7493.577833] [<ffffffff81351b63>] ? sub_preempt_count+0x83/0x94
[ 7493.577838] [<ffffffffa024b695>] ? ttm_bo_wait+0xb5/0x19a [ttm]
[ 7493.577851] [<ffffffffa02db45a>] ? radeon_bo_wait+0x78/0xa8 [radeon]
[ 7493.577864] [<ffffffffa02db938>] ? radeon_gem_wait_idle_ioctl+0x32/0x61 [radeon]
[ 7493.577871] [<ffffffffa01f476d>] ? drm_ioctl+0x271/0x340 [drm]
[ 7493.577873] [<ffffffff8134f09c>] ? _raw_spin_unlock+0x26/0x38
[ 7493.577886] [<ffffffffa02db906>] ? radeon_gem_busy_ioctl+0x7e/0x7e [radeon]
[ 7493.577890] [<ffffffff8104222a>] ? migrate_enable+0x12a/0x13c
[ 7493.577893] [<ffffffff81009391>] ? do_signal+0x55e/0x640
[ 7493.577897] [<ffffffff811be22c>] ? hweight_long+0x5/0x6
[ 7493.577902] [<ffffffff81114d13>] ? do_vfs_ioctl+0x41e/0x45f
[ 7493.577904] [<ffffffff81009752>] ? sys_rt_sigreturn+0x196/0x1c4
[ 7493.577907] [<ffffffff81114d9f>] ? sys_ioctl+0x4b/0x70
[ 7493.577910] [<ffffffff813537d2>] ? system_call_fastpath+0x16/0x1b
[ 7493.577911] Code: 15 48 c7 c6 9e 75 32 a0 48 c7 c7 90 49 31 a0 31 c0 e8 48 b5 f0 ff 8b 83 5c 0c 00 00 89 c2 ff c0 48 c1 e2 02 48 03 93 50 0c 00 00
[ 7493.577921] 2a 23 83 7c 0c 00 00 ff 8b 6c 0c 00 00 ff 8b 68 0c 00 00 89
[ 7493.577926] RIP [<ffffffffa02ede04>] radeon_ring_write+0x3e/0x5f [radeon]
[ 7493.577938] RSP <ffff880122a9fb58>
[ 7493.577939] CR2: ffffc90411580ffc
[ 7493.580004] ---[ end trace 0000000000000003 ]---
[ 7493.580004] [drm:drm_release] *ERROR* Device busy: 1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-rt-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP PREEMPT RT Sun Jul 24 03:57:06 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64 root=UUID=b88c9b9a-8744-4408-a480-58770bb6671d ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer P5QL PRO/P5QL PRO, BIOS 1004 07/01/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ cff7a000-cff80000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffa000-130000000
[ 0.000000] RAMDISK: 374cc000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbb10 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff80000 00040 (v01 A_M_I_ OEMRSDT 07000901 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 07000901 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 08888 (v01 A1014 A1014001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 07000901 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 07000901 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 07000901 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff88cd0 00038 (v01 A_M_I_ OEMHPET 07000901 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff88d10 000B0 (v01 A_M_I_ OEMOSFR 07000901 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8e8d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048335
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 105 pages/cpu @ffff88012fc00000 s400640 r8192 d21248 u524288
[ 0.000000] pcpu-alloc: s400640 r8192 d21248 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031306
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64 root=UUID=b88c9b9a-8744-4408-a480-58770bb6671d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4045456k/4980736k available (3419k kernel code, 787396k absent, 147884k reserved, 3307k data, 884k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2497.600 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4995.20 BogoMIPS (lpj=9990400)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004148] Security Framework initialized
[ 0.004153] SELinux: Disabled at boot.
[ 0.004936] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008522] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009320] Mount-cache hash table entries: 256
[ 0.009594] Initializing cgroup subsys cpuacct
[ 0.009599] Initializing cgroup subsys memory
[ 0.009623] Initializing cgroup subsys devices
[ 0.009626] Initializing cgroup subsys freezer
[ 0.009628] Initializing cgroup subsys net_cls
[ 0.009630] Initializing cgroup subsys blkio
[ 0.009713] CPU: Physical Processor ID: 0
[ 0.009714] CPU: Processor Core ID: 0
[ 0.009716] mce: CPU supports 6 MCE banks
[ 0.009723] CPU0: Thermal monitoring enabled (TM2)
[ 0.009728] using mwait in idle threads.
[ 0.010081] ACPI: Core revision 20110413
[ 0.028333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068027] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.072003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.084185] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.104044] Booting Node 0, Processors #1
[ 0.104047] smpboot cpu 1: start_ip = 9a000
[ 0.196055] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.212079] #2
[ 0.212081] smpboot cpu 2: start_ip = 9a000
[ 0.304042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.320071] #3 Ok.
[ 0.320073] smpboot cpu 3: start_ip = 9a000
[ 0.412050] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.416036] Brought up 4 CPUs
[ 0.416039] Total of 4 processors activated (19980.01 BogoMIPS).
[ 0.418411] devtmpfs: initialized
[ 0.422203] PM: Registering ACPI NVS region at cff8e000 (270336 bytes)
[ 0.422203] print_constraints: dummy:
[ 0.422203] NET: Registered protocol family 16
[ 0.422203] ACPI: bus type pci registered
[ 0.422203] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.422203] PCI: not using MMCONFIG
[ 0.422203] PCI: Using configuration type 1 for base access
[ 0.424554] bio: create slab <bio-0> at 0
[ 0.425529] ACPI: EC: Look up EC in DSDT
[ 0.428618] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.454050] ACPI: SSDT 00000000cff8e0d0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.454448] ACPI: Dynamic OEM Table Load:
[ 0.454450] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.455763] ACPI: SSDT 00000000cff8e2d0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.456211] ACPI: Dynamic OEM Table Load:
[ 0.456213] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.457522] ACPI: SSDT 00000000cff8e4d0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.457917] ACPI: Dynamic OEM Table Load:
[ 0.457919] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.459233] ACPI: SSDT 00000000cff8e6d0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.459630] ACPI: Dynamic OEM Table Load:
[ 0.459632] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.460281] ACPI: Interpreter enabled
[ 0.460284] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.460363] ACPI: Using IOAPIC for interrupt routing
[ 0.460424] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.463685] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.569610] ACPI: No dock devices found.
[ 0.569612] HEST: Table not found.
[ 0.569615] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.569816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.570258] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.570260] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.570262] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.570264] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.570266] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.570284] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.570322] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.570349] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.570352] pci 0000:00:01.0: PME# disabled
[ 0.570390] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.570427] pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
[ 0.570470] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.570507] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
[ 0.570550] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.570587] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
[ 0.570637] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.570655] pci 0000:00:1a.7: reg 10: [mem 0xfe8ffc00-0xfe8fffff]
[ 0.570720] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.570723] pci 0000:00:1a.7: PME# disabled
[ 0.570747] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.570760] pci 0000:00:1b.0: reg 10: [mem 0xfe8f8000-0xfe8fbfff 64bit]
[ 0.570808] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.570811] pci 0000:00:1b.0: PME# disabled
[ 0.570831] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.570879] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.570882] pci 0000:00:1c.0: PME# disabled
[ 0.570906] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.570954] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.570957] pci 0000:00:1c.4: PME# disabled
[ 0.570979] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.571027] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.571030] pci 0000:00:1c.5: PME# disabled
[ 0.571054] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.571091] pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
[ 0.571134] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.571171] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
[ 0.571213] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.571250] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
[ 0.571300] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.571319] pci 0000:00:1d.7: reg 10: [mem 0xfe8ff800-0xfe8ffbff]
[ 0.571383] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.571387] pci 0000:00:1d.7: PME# disabled
[ 0.571407] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.571461] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.571559] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.571572] pci 0000:00:1f.2: reg 10: [io 0xa000-0xa007]
[ 0.571579] pci 0000:00:1f.2: reg 14: [io 0x9c00-0x9c03]
[ 0.571585] pci 0000:00:1f.2: reg 18: [io 0x9880-0x9887]
[ 0.571592] pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803]
[ 0.571599] pci 0000:00:1f.2: reg 20: [io 0x9480-0x948f]
[ 0.571605] pci 0000:00:1f.2: reg 24: [io 0x9400-0x940f]
[ 0.571642] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.571655] pci 0000:00:1f.3: reg 10: [mem 0xfe8ff400-0xfe8ff4ff 64bit]
[ 0.571673] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.571705] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.571718] pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007]
[ 0.571725] pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03]
[ 0.571732] pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887]
[ 0.571739] pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803]
[ 0.571745] pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f]
[ 0.571752] pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f]
[ 0.571813] pci 0000:01:00.0: [1002:9598] type 0 class 0x000300
[ 0.571824] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.571834] pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9effff 64bit]
[ 0.571841] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
[ 0.571852] pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.571869] pci 0000:01:00.0: supports D1 D2
[ 0.571890] pci 0000:01:00.1: [1002:aa20] type 0 class 0x000403
[ 0.571901] pci 0000:01:00.1: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.571942] pci 0000:01:00.1: supports D1 D2
[ 0.571969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.571972] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.571974] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.571978] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.572015] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.572018] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.572022] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.572047] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.572102] pci 0000:03:00.0: [11ab:6101] type 0 class 0x000101
[ 0.572122] pci 0000:03:00.0: reg 10: [io 0xec00-0xec07]
[ 0.572138] pci 0000:03:00.0: reg 14: [io 0xe880-0xe883]
[ 0.572148] pci 0000:03:00.0: reg 18: [io 0xe800-0xe807]
[ 0.572169] pci 0000:03:00.0: reg 1c: [io 0xe480-0xe483]
[ 0.572180] pci 0000:03:00.0: reg 20: [io 0xe400-0xe40f]
[ 0.572191] pci 0000:03:00.0: reg 24: [mem 0xfebffc00-0xfebffdff]
[ 0.572233] pci 0000:03:00.0: supports D1
[ 0.572234] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.572238] pci 0000:03:00.0: PME# disabled
[ 0.572254] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.572263] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.572266] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.572270] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.572274] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.572331] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
[ 0.572352] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.572364] pci 0000:02:00.0: reg 18: [io 0xdc00-0xdc7f]
[ 0.572434] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.572438] pci 0000:02:00.0: PME# disabled
[ 0.572456] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.572466] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.572469] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.572472] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.572477] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.572531] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.572535] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.572538] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.572543] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.572546] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.572549] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.572551] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.572554] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.572557] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.572577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.573348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.573513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.573959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.574118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.574356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.574503] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.574507] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.574509] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.615602] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.615739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.615874] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.616009] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.616166] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.616305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.616439] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.616574] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.616857] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.616870] vgaarb: loaded
[ 0.616871] vgaarb: bridge control possible 0000:01:00.0
[ 0.616979] PCI: Using ACPI for IRQ routing
[ 0.622133] PCI: pci_cache_line_size set to 64 bytes
[ 0.622335] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.622341] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.622599] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.622607] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.622611] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.640120] Switching to clocksource hpet
[ 0.643785] Switched to NOHz mode on CPU #0
[ 0.643873] Switched to NOHz mode on CPU #2
[ 0.643883] Switched to NOHz mode on CPU #1
[ 0.643911] Switched to NOHz mode on CPU #3
[ 0.646670] pnp: PnP ACPI init
[ 0.646695] ACPI: bus type pnp registered
[ 0.646906] pnp 00:00: [bus 00-ff]
[ 0.646912] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.646915] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.646917] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.646920] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.646922] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.646925] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.647024] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.647053] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.647193] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.647198] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.647287] pnp 00:02: [dma 4]
[ 0.647289] pnp 00:02: [io 0x0000-0x000f]
[ 0.647292] pnp 00:02: [io 0x0081-0x0083]
[ 0.647294] pnp 00:02: [io 0x0087]
[ 0.647296] pnp 00:02: [io 0x0089-0x008b]
[ 0.647298] pnp 00:02: [io 0x008f]
[ 0.647300] pnp 00:02: [io 0x00c0-0x00df]
[ 0.647359] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.647389] pnp 00:03: [io 0x0070-0x0071]
[ 0.647399] pnp 00:03: [irq 8]
[ 0.647464] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.647487] pnp 00:04: [io 0x0061]
[ 0.647546] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.647572] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.647577] pnp 00:05: [irq 13]
[ 0.647638] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.648376] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.648379] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.648382] pnp 00:06: [io 0x0290-0x029f]
[ 0.648527] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.648531] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.648891] pnp 00:07: [io 0x0010-0x001f]
[ 0.648893] pnp 00:07: [io 0x0022-0x003f]
[ 0.648896] pnp 00:07: [io 0x0044-0x004d]
[ 0.648898] pnp 00:07: [io 0x0050-0x005f]
[ 0.648900] pnp 00:07: [io 0x0062-0x0063]
[ 0.648902] pnp 00:07: [io 0x0065-0x006f]
[ 0.648904] pnp 00:07: [io 0x0072-0x007f]
[ 0.648906] pnp 00:07: [io 0x0080]
[ 0.648911] pnp 00:07: [io 0x0084-0x0086]
[ 0.648913] pnp 00:07: [io 0x0088]
[ 0.648916] pnp 00:07: [io 0x008c-0x008e]
[ 0.648918] pnp 00:07: [io 0x0090-0x009f]
[ 0.648920] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.648922] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.648924] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.648926] pnp 00:07: [io 0x0800-0x087f]
[ 0.648928] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.648931] pnp 00:07: [io 0x0500-0x057f]
[ 0.648933] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.648935] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.648937] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.648940] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.649104] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.649108] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.649111] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.649115] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.649119] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.649123] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.649130] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.649134] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.649351] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.649421] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.649603] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.649606] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.649671] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.649810] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.649954] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.649958] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.650376] pnp 00:0b: [io 0x0060]
[ 0.650378] pnp 00:0b: [io 0x0064]
[ 0.650380] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.650383] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.650533] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.650537] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.650542] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.651696] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.651702] pnp 00:0c: [irq 4]
[ 0.651704] pnp 00:0c: [dma 0 disabled]
[ 0.651843] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.651952] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.652124] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.652128] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.652679] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.652681] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.652684] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.652686] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.652689] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.652856] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.652861] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.652866] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.652870] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.652875] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.653315] pnp: PnP ACPI: found 15 devices
[ 0.653316] ACPI: ACPI bus type pnp unregistered
[ 0.662162] PCI: max bus depth: 1 pci_try_num: 2
[ 0.662200] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.662205] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.662210] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0400000-0xf07fffff]
[ 0.662214] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.662219] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.662222] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.662225] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.662227] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.662231] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.662234] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.662238] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf07fffff]
[ 0.662241] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.662246] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.662248] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.662252] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.662256] pci 0000:00:1c.4: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.662261] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.662263] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.662267] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.662271] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.662275] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.662277] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.662281] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.662284] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.662300] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.662304] pci 0000:00:01.0: setting latency timer to 64
[ 0.662308] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.662317] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.662321] pci 0000:00:1c.0: setting latency timer to 64
[ 0.662326] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.662330] pci 0000:00:1c.4: setting latency timer to 64
[ 0.662335] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.662338] pci 0000:00:1c.5: setting latency timer to 64
[ 0.662344] pci 0000:00:1e.0: setting latency timer to 64
[ 0.662347] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.662349] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.662350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.662352] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.662354] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.662356] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.662358] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.662360] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.662362] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.662364] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf07fffff]
[ 0.662366] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.662368] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.662369] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.662371] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.662373] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.662375] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.662377] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.662379] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.662380] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.662382] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.662384] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.662386] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.662535] NET: Registered protocol family 2
[ 0.662953] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.665790] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.669795] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.671120] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.671123] TCP reno registered
[ 0.671196] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.671357] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.671734] NET: Registered protocol family 1
[ 0.671984] pci 0000:01:00.0: Boot video device
[ 0.672057] PCI: CLS 32 bytes, default 64
[ 0.672181] Unpacking initramfs...
[ 0.943977] Freeing initrd memory: 11408k freed
[ 0.948778] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.948783] Placing 64MB software IO TLB between ffff8800cbf7a000 - ffff8800cff7a000
[ 0.948784] software IO TLB at phys 0xcbf7a000 - 0xcff7a000
[ 0.949947] audit: initializing netlink socket (disabled)
[ 0.949973] type=2000 audit(1313447531.944:1): initialized
[ 0.974106] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.993231] VFS: Disk quotas dquot_6.5.2
[ 0.993348] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.993515] msgmni has been set to 7923
[ 0.994009] alg: No test for stdrng (krng)
[ 0.994081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.994084] io scheduler noop registered
[ 0.994086] io scheduler deadline registered
[ 0.994122] io scheduler cfq registered (default)
[ 0.994392] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.994420] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.994501] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.994534] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.994613] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.994647] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.994730] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.994763] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.995182] ERST: Table is not found!
[ 0.995308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.015651] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.268591] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.312426] Linux agpgart interface v0.103
[ 1.313394] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.315936] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.315945] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.316240] mousedev: PS/2 mouse device common for all mice
[ 1.316340] rtc_cmos 00:03: RTC can wake from S4
[ 1.316507] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.316591] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.316620] cpuidle: using governor ladder
[ 1.316621] cpuidle: using governor menu
[ 1.317731] TCP cubic registered
[ 1.317839] NET: Registered protocol family 10
[ 1.320246] Mobile IPv6
[ 1.320250] NET: Registered protocol family 17
[ 1.320257] Registering the dns_resolver key type
[ 1.320484] PM: Hibernation image not present or could not be loaded.
[ 1.320514] registered taskstats version 1
[ 1.330444] rtc_cmos 00:03: setting system clock to 2011-08-15 22:32:12 UTC (1313447532)
[ 1.330527] Initializing network drop monitor service
[ 1.332766] Freeing unused kernel memory: 884k freed
[ 1.333032] Write protecting the kernel read-only data: 6144k
[ 1.335732] Freeing unused kernel memory: 660k freed
[ 1.338806] Freeing unused kernel memory: 720k freed
[ 1.358757] udevd[66]: starting version 172
[ 1.398362] usbcore: registered new interface driver usbfs
[ 1.400217] usbcore: registered new interface driver hub
[ 1.401347] usbcore: registered new device driver usb
[ 1.410794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.411119] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.411164] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.411167] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.411337] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.411384] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.415273] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.415389] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00
[ 1.424576] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.424605] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.426015] SCSI subsystem initialized
[ 1.428043] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.428998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.429001] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.429003] usb usb1: Product: EHCI Host Controller
[ 1.429004] usb usb1: Manufacturer: Linux 3.0.0-1-rt-amd64 ehci_hcd
[ 1.429006] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.436543] libata version 3.00 loaded.
[ 1.440702] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.440736] hub 1-0:1.0: USB hub found
[ 1.440749] hub 1-0:1.0: 6 ports detected
[ 1.440787] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.444119] ata_piix 0000:00:1f.2: version 2.13
[ 1.444150] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.444155] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.444246] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.463632] scsi0 : pata_marvell
[ 1.469557] scsi1 : pata_marvell
[ 1.475953] scsi2 : ata_piix
[ 1.476174] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.476177] ata2: DUMMY
[ 1.479108] scsi3 : ata_piix
[ 1.490842] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 1.490853] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 1.491033] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.491073] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.491078] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.491143] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.491181] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.495046] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.495141] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800
[ 1.508045] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.508197] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.508199] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.508206] usb usb2: Product: EHCI Host Controller
[ 1.508208] usb usb2: Manufacturer: Linux 3.0.0-1-rt-amd64 ehci_hcd
[ 1.508209] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.512485] hub 2-0:1.0: USB hub found
[ 1.512502] hub 2-0:1.0: 6 ports detected
[ 1.515507] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.515514] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.515585] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.523429] scsi4 : ata_piix
[ 1.526264] scsi5 : ata_piix
[ 1.534255] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 1.534264] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 1.597739] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.597832] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.597843] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.597846] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.597907] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.598009] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.598100] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.598103] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.598104] usb usb3: Product: UHCI Host Controller
[ 1.598106] usb usb3: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.598108] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.599677] hub 3-0:1.0: USB hub found
[ 1.599688] hub 3-0:1.0: 2 ports detected
[ 1.599904] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.599912] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.599915] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.599928] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.600076] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.600160] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.600162] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600164] usb usb4: Product: UHCI Host Controller
[ 1.600166] usb usb4: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.600167] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.600500] hub 4-0:1.0: USB hub found
[ 1.600511] hub 4-0:1.0: 2 ports detected
[ 1.600711] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.600719] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.600722] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.600735] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.600822] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 1.600907] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.600909] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600911] usb usb5: Product: UHCI Host Controller
[ 1.600912] usb usb5: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.600914] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.601128] hub 5-0:1.0: USB hub found
[ 1.601138] hub 5-0:1.0: 2 ports detected
[ 1.601338] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.601346] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.601349] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.601365] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.601441] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.601523] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.601525] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.601527] usb usb6: Product: UHCI Host Controller
[ 1.601528] usb usb6: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.601530] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.601740] hub 6-0:1.0: USB hub found
[ 1.601750] hub 6-0:1.0: 2 ports detected
[ 1.601944] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.601951] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.601954] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.601971] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.602049] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.602137] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.602139] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.602141] usb usb7: Product: UHCI Host Controller
[ 1.602142] usb usb7: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.602144] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.602399] hub 7-0:1.0: USB hub found
[ 1.602413] hub 7-0:1.0: 2 ports detected
[ 1.603393] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.603401] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.603403] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.603417] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.603498] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.603582] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603584] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603586] usb usb8: Product: UHCI Host Controller
[ 1.603587] usb usb8: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.603589] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.603804] hub 8-0:1.0: USB hub found
[ 1.603815] hub 8-0:1.0: 2 ports detected
[ 1.697851] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.700270] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.703049] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.705496] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.707397] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.707402] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 1.862585] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.873205] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.909832] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.911640] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.913470] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.915279] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.917104] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.917110] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 1.948015] Refined TSC clocksource calibration: 2497.499 MHz.
[ 1.948020] Switching to clocksource tsc
[ 2.121835] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.123644] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.125470] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.127277] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.129113] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.129118] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.284061] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.284071] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 2.284185] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.284197] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 2.284206] ata4.01: link offline, clearing class 3 to NONE
[ 2.292257] ata4.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66
[ 2.293133] ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 2.293136] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.301124] ata3.00: configured for UDMA/133
[ 2.301305] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 2.308127] ata4.00: configured for UDMA/66
[ 2.308991] scsi 3:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5
[ 2.334979] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.337775] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.340466] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.342333] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.344221] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.344228] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.346140] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.346248] sd 2:0:0:0: [sda] Write Protect is off
[ 2.346251] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.346296] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.347388] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.347393] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.347881] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.404645] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.405390] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.410826] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.410914] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.549845] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.551655] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.553493] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.555318] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.557208] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.557214] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.557216] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2.613985] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.615971] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.617812] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.619620] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.621457] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.621462] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.827352] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.829535] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.831688] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.833883] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.836053] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.836060] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.041823] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.043632] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.045456] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.047264] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.049088] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.049094] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.253824] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.255632] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.257457] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.259264] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.261086] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.261092] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.465841] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.467650] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.469515] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.471323] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.473156] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.473162] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.473164] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 3.529832] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.531640] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.533476] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.535284] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.537120] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.537125] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.732138] PM: Starting manual resume from disk
[ 3.732140] PM: Hibernation image partition 8:7 present
[ 3.732141] PM: Looking for hibernation image.
[ 3.732326] PM: Image not found (code -22)
[ 3.732327] PM: Hibernation image not present or could not be loaded.
[ 3.741844] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.743653] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.745523] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.747331] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.749167] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.749173] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.754249] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 3.754251] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.954017] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.955924] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.957905] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.959979] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.961810] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.961817] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.165875] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.167743] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.169623] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.171459] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.173295] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.173301] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.378225] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.380250] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.382166] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.384299] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.386289] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.386296] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.386298] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 4.441914] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.443770] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.445639] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.447519] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.449417] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.449423] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.653847] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.655757] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.657750] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.659668] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.661653] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.661660] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.865917] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.867808] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.869671] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.871532] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.873398] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.873416] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.077988] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.079893] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.081762] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.083570] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.085539] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.085545] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.289857] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.291667] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.293548] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.295356] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.297232] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.297238] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.297240] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 5.297258] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 5.420038] usb 2-3: new high speed USB device number 2 using ehci_hcd
[ 5.580952] usb 2-3: New USB device found, idVendor=145f, idProduct=0142
[ 5.580955] usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 5.580957] usb 2-3: Product: Trust Webcam
[ 5.580959] usb 2-3: Manufacturer:
[ 6.048030] usb 7-2: new full speed USB device number 2 using uhci_hcd
[ 6.204365] usb 7-2: New USB device found, idVendor=045e, idProduct=070f
[ 6.204368] usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.204371] usb 7-2: Product: Microsoft LifeChat LX-3000
[ 6.217512] input: Microsoft LifeChat LX-3000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input0
[ 6.217613] generic-usb 0003:045E:070F.0001: input,hidraw0: USB HID v1.00 Device [Microsoft LifeChat LX-3000 ] on usb-0000:00:1d.1-2/input3
[ 6.217662] usbcore: registered new interface driver usbhid
[ 6.217663] usbhid: USB HID core driver
[ 6.444030] usb 8-1: new low speed USB device number 2 using uhci_hcd
[ 6.700163] usb 8-1: New USB device found, idVendor=04d9, idProduct=1603
[ 6.700165] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.700167] usb 8-1: Product: USB Keyboard
[ 6.700169] usb 8-1: Manufacturer:
[ 6.713842] EXT4-fs (sda6): recovery complete
[ 6.714235] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.751487] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 6.751589] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.2-1/input0
[ 6.844274] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
[ 6.844348] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.2-1/input1
[ 7.084025] usb 8-2: new low speed USB device number 3 using uhci_hcd
[ 7.265146] usb 8-2: New USB device found, idVendor=045e, idProduct=0047
[ 7.265149] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 7.265151] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 7.265153] usb 8-2: Manufacturer: Microsoft
[ 7.283463] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 7.283600] generic-usb 0003:045E:0047.0004: input,hidraw3: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 8.420911] udevd[313]: starting version 172
[ 8.999590] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 8.999599] ACPI: Power Button [PWRB]
[ 9.005195] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.005203] ACPI: Power Button [PWRF]
[ 9.040069] ACPI: acpi_idle registered with cpuidle
[ 9.254649] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.299276] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.420715] Linux media interface: v0.10
[ 9.487320] 2:3:1: cannot get freq at ep 0x84
[ 9.499808] usbcore: registered new interface driver snd-usb-audio
[ 9.682033] [drm] Initialized drm 1.1.0 20060810
[ 9.716422] Linux video capture interface: v2.00
[ 9.754084] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.754138] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 9.754247] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.884210] uvcvideo: Found UVC 1.00 device Trust Webcam (145f:0142)
[ 9.891659] input: Trust Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input7
[ 9.891804] usbcore: registered new interface driver uvcvideo
[ 9.891805] USB Video Class driver (v1.1.0)
[ 9.992685] [drm] radeon kernel modesetting enabled.
[ 9.992773] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.992778] radeon 0000:01:00.0: setting latency timer to 64
[ 9.993168] [drm] initializing kernel modesetting (RV635 0x1002:0x9598).
[ 9.993207] [drm] register mmio base: 0xFE9E0000
[ 9.993208] [drm] register mmio size: 65536
[ 9.993489] ATOM BIOS: RV635PRO
[ 9.993518] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 9.993520] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 9.993527] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 9.993528] [drm] Detected VRAM RAM=512M, BAR=256M
[ 9.993530] [drm] RAM width 128bits DDR
[ 9.993603] [TTM] Zone kernel: Available graphics memory: 2029564 kiB.
[ 9.993605] [TTM] Initializing pool allocator.
[ 9.993646] [drm] radeon: 512M of VRAM memory ready
[ 9.993648] [drm] radeon: 512M of GTT memory ready.
[ 9.993698] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.993699] [drm] Driver supports precise vblank timestamp query.
[ 9.993737] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 9.993741] radeon 0000:01:00.0: radeon: using MSI.
[ 9.993821] [drm] radeon: irq initialized.
[ 9.993825] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 9.994518] [drm] Loading RV635 Microcode
[ 10.120150] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 10.248788] radeon 0000:01:00.0: WB enabled
[ 10.281327] [drm] ring test succeeded in 1 usecs
[ 10.281859] [drm] radeon: ib pool ready.
[ 10.282181] [drm] ib test succeeded in 0 usecs
[ 10.282203] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 10.297256] [drm] Radeon Display Connectors
[ 10.297258] [drm] Connector 0:
[ 10.297259] [drm] DVI-I
[ 10.297260] [drm] HPD1
[ 10.297262] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 10.297265] [drm] Encoders:
[ 10.297266] [drm] DFP1: INTERNAL_UNIPHY
[ 10.297268] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 10.297269] [drm] Connector 1:
[ 10.297270] [drm] DIN
[ 10.297270] [drm] Encoders:
[ 10.297271] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 10.297272] [drm] Connector 2:
[ 10.297273] [drm] DVI-I
[ 10.297274] [drm] HPD2
[ 10.297276] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 10.297277] [drm] Encoders:
[ 10.297278] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 10.297279] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 10.363913] [drm] Internal thermal controller with fan control
[ 10.364051] [drm] radeon: power management initialized
[ 10.458532] [drm] fb mappable at 0xD0141000
[ 10.458534] [drm] vram apper at 0xD0000000
[ 10.458535] [drm] size 8294400
[ 10.458536] [drm] fb depth is 24
[ 10.458537] [drm] pitch is 7680
[ 10.458654] fbcon: radeondrmfb (fb0) is primary device
[ 10.880894] Console: switching to colour frame buffer device 240x67
[ 10.885546] fb0: radeondrmfb frame buffer device
[ 10.885547] drm: registered panic notifier
[ 10.885556] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[ 10.885620] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.885712] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 10.885799] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 11.143960] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 11.144490] input: HDA ATI HDMI HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input9
[ 11.669271] Adding 2882556k swap on /dev/sda7. Priority:-1 extents:1 across:2882556k
[ 11.675083] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 11.836402] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 12.000724] loop: module loaded
[ 12.480428] fuse init (API version 7.16)
[ 14.463581] ATL1E 0000:02:00.0: irq 47 for MSI/MSI-X
[ 14.463793] ATL1E 0000:02:00.0: eth0: NIC Link is Up <1000 Mbps Full Duplex>
[ 14.464189] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.464577] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.594728] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 17.261865] lp: driver loaded but no devices found
[ 17.335832] ppdev: user-space parallel port driver
[ 17.656220] Bluetooth: Core ver 2.16
[ 17.656263] NET: Registered protocol family 31
[ 17.656264] Bluetooth: HCI device and connection manager initialized
[ 17.656267] Bluetooth: HCI socket layer initialized
[ 17.656269] Bluetooth: L2CAP socket layer initialized
[ 17.656383] Bluetooth: SCO socket layer initialized
[ 17.671025] Bluetooth: RFCOMM TTY layer initialized
[ 17.671033] Bluetooth: RFCOMM socket layer initialized
[ 17.671035] Bluetooth: RFCOMM ver 1.11
[ 18.037709] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.037716] Bluetooth: BNEP filters: protocol multicast
[ 24.480018] eth0: no IPv6 routers present
[ 39.926612] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 52.911080] 2:3:1: cannot get freq at ep 0x84
[ 215.452052] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
[ 215.452054] ------------[ cut here ]------------
[ 215.452077] WARNING: at /tmp/buildd/linux-2.6-3.0.0/debian/build/source_amd64_rt/drivers/gpu/drm/radeon/radeon_fence.c:267 radeon_fence_wait+0x2c1/0x340 [radeon]()
[ 215.452079] Hardware name: P5QL PRO
[ 215.452081] GPU lockup (waiting for 0x000029F3 last fence id 0x000029F2)
[ 215.452082] Modules linked in: bnep rfcomm bluetooth parport_pc acpi_cpufreq mperf ppdev rfkill lp parport cpufreq_userspace cpufreq_conservative cpufreq_stats cpufreq_powersave uinput fuse loop snd_hda_codec_hdmi snd_hda_codec_realtek radeon uvcvideo ttm psmouse snd_hda_intel snd_hda_codec videodev drm_kms_helper drm evdev snd_usb_audio media v4l2_compat_ioctl32 snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi snd_hwdep snd_pcm snd_seq i2c_i801 snd_timer snd_seq_device serio_raw pcspkr asus_atk0110 i2c_algo_bit snd i2c_core power_supply processor soundcore snd_page_alloc thermal_sys button usbhid hid ext4 mbcache jbd2 crc16 sg sd_mod crc_t10dif sr_mod cdrom uhci_hcd ata_generic ata_piix pata_marvell libata atl1e scsi_mod ehci_hcd usbcore [last unloaded: scsi_wait_scan]
[ 215.452123] Pid: 1893, comm: Xorg Not tainted 3.0.0-1-rt-amd64 #1
[ 215.452124] Call Trace:
[ 215.452132] [<ffffffff8104856d>] ? warn_slowpath_common+0x78/0x8c
[ 215.452136] [<ffffffff81048622>] ? warn_slowpath_fmt+0x45/0x4a
[ 215.452147] [<ffffffffa030ab43>] ? radeon_fence_wait+0x2c1/0x340 [radeon]
[ 215.452152] [<ffffffff81063438>] ? wake_up_bit+0x23/0x23
[ 215.452166] [<ffffffffa031bed3>] ? radeon_ib_get+0x105/0x1af [radeon]
[ 215.452179] [<ffffffffa031d285>] ? radeon_cs_ioctl+0x88/0x186 [radeon]
[ 215.452186] [<ffffffffa025276d>] ? drm_ioctl+0x271/0x340 [drm]
[ 215.452200] [<ffffffffa031d1fd>] ? radeon_cs_finish_pages+0x7b/0x7b [radeon]
[ 215.452204] [<ffffffff81351a8a>] ? do_page_fault+0x2d5/0x32b
[ 215.452208] [<ffffffff810e11bc>] ? mmap_region+0x336/0x431
[ 215.452212] [<ffffffff81114d13>] ? do_vfs_ioctl+0x41e/0x45f
[ 215.452215] [<ffffffff81108009>] ? fput+0x1a/0x194
[ 215.452218] [<ffffffff81114d9f>] ? sys_ioctl+0x4b/0x70
[ 215.452221] [<ffffffff813537d2>] ? system_call_fastpath+0x16/0x1b
[ 215.452223] ---[ end trace 0000000000000002 ]---
[ 215.453377] radeon 0000:01:00.0: GPU softreset
[ 215.453379] radeon 0000:01:00.0: R_008010_GRBM_STATUS=0xFFFFFFFF
[ 215.453381] radeon 0000:01:00.0: R_008014_GRBM_STATUS2=0xFFFFFFFF
[ 215.453383] radeon 0000:01:00.0: R_000E50_SRBM_STATUS=0xFFFFFFFF
[ 215.579469] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 215.579473] radeon 0000:01:00.0: R_008020_GRBM_SOFT_RESET=0x00007FEE
[ 215.594359] radeon 0000:01:00.0: R_008020_GRBM_SOFT_RESET=0x00000001
[ 215.610240] radeon 0000:01:00.0: R_008010_GRBM_STATUS=0xFFFFFFFF
[ 215.610242] radeon 0000:01:00.0: R_008014_GRBM_STATUS2=0xFFFFFFFF
[ 215.610243] radeon 0000:01:00.0: R_000E50_SRBM_STATUS=0xFFFFFFFF
[ 215.611236] radeon 0000:01:00.0: GPU reset succeed
[ 215.863314] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 215.984797] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 215.986905] radeon 0000:01:00.0: WB enabled
[ 216.018004] BUG: unable to handle kernel paging request at ffffc90411580ffc
[ 216.018008] IP: [<ffffffffa032de04>] radeon_ring_write+0x3e/0x5f [radeon]
[ 216.018028] PGD 12f075067 PUD 0
[ 216.018030] Oops: 0002 [#1] PREEMPT SMP
[ 216.018034] CPU 3
[ 216.018035] Modules linked in: bnep rfcomm bluetooth parport_pc acpi_cpufreq mperf ppdev rfkill lp parport cpufreq_userspace cpufreq_conservative cpufreq_stats cpufreq_powersave uinput fuse loop snd_hda_codec_hdmi snd_hda_codec_realtek radeon uvcvideo ttm psmouse snd_hda_intel snd_hda_codec videodev drm_kms_helper drm evdev snd_usb_audio media v4l2_compat_ioctl32 snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi snd_hwdep snd_pcm snd_seq i2c_i801 snd_timer snd_seq_device serio_raw pcspkr asus_atk0110 i2c_algo_bit snd i2c_core power_supply processor soundcore snd_page_alloc thermal_sys button usbhid hid ext4 mbcache jbd2 crc16 sg sd_mod crc_t10dif sr_mod cdrom uhci_hcd ata_generic ata_piix pata_marvell libata atl1e scsi_mod ehci_hcd usbcore [last unloaded: scsi_wait_scan]
[ 216.018067]
[ 216.018070] Pid: 1893, comm: Xorg Tainted: G W 3.0.0-1-rt-amd64 #1 System manufacturer P5QL PRO/P5QL PRO
[ 216.018073] RIP: 0010:[<ffffffffa032de04>] [<ffffffffa032de04>] radeon_ring_write+0x3e/0x5f [radeon]
[ 216.018085] RSP: 0018:ffff88011fc37ae8 EFLAGS: 00010286
[ 216.018087] RAX: 0000000000000000 RBX: ffff880128560000 RCX: ffff8801270b9040
[ 216.018089] RDX: ffffc90411580ffc RSI: 00000000c0054400 RDI: ffff880128560000
[ 216.018090] RBP: 00000000c0054400 R08: ffff88011fc36000 R09: 0000000000000000
[ 216.018092] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000011
[ 216.018094] R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000029f2
[ 216.018096] FS: 00007f4cbc72c880(0000) GS:ffff88012fd80000(0000) knlGS:0000000000000000
[ 216.018098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 216.018100] CR2: ffffc90411580ffc CR3: 00000001289c2000 CR4: 00000000000006e0
[ 216.018102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 216.018103] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 216.018105] Process Xorg (pid: 1893, threadinfo ffff88011fc36000, task ffff8801270b9040)
[ 216.018107] Stack:
[ 216.018108] ffffffffa047f065 ffff880128560000 0000000000000000 ffffffffa033098c
[ 216.018111] 0000000000000011 ffff880128560000 0000000000000911 ffffffffa0330bc4
[ 216.018114] ffff880128560000 ffffc900113b5900 ffffc900113b5900 ffffffffa03323aa
[ 216.018117] Call Trace:
[ 216.018130] [<ffffffffa033098c>] ? r600_cp_start+0x3f/0xb5 [radeon]
[ 216.018141] [<ffffffffa0330bc4>] ? r600_cp_resume+0x1c2/0x1e6 [radeon]
[ 216.018153] [<ffffffffa03323aa>] ? r600_startup+0x6e3/0x6f0 [radeon]
[ 216.018164] [<ffffffffa03323d4>] ? r600_resume+0x1d/0x7d [radeon]
[ 216.018173] [<ffffffffa02fb402>] ? radeon_gpu_reset+0x62/0x9e [radeon]
[ 216.018184] [<ffffffffa030ab52>] ? radeon_fence_wait+0x2d0/0x340 [radeon]
[ 216.018189] [<ffffffff81063438>] ? wake_up_bit+0x23/0x23
[ 216.018202] [<ffffffffa031bed3>] ? radeon_ib_get+0x105/0x1af [radeon]
[ 216.018216] [<ffffffffa031d285>] ? radeon_cs_ioctl+0x88/0x186 [radeon]
[ 216.018224] [<ffffffffa025276d>] ? drm_ioctl+0x271/0x340 [drm]
[ 216.018237] [<ffffffffa031d1fd>] ? radeon_cs_finish_pages+0x7b/0x7b [radeon]
[ 216.018241] [<ffffffff81351a8a>] ? do_page_fault+0x2d5/0x32b
[ 216.018245] [<ffffffff810e11bc>] ? mmap_region+0x336/0x431
[ 216.018249] [<ffffffff81114d13>] ? do_vfs_ioctl+0x41e/0x45f
[ 216.018253] [<ffffffff81108009>] ? fput+0x1a/0x194
[ 216.018255] [<ffffffff81114d9f>] ? sys_ioctl+0x4b/0x70
[ 216.018258] [<ffffffff813537d2>] ? system_call_fastpath+0x16/0x1b
[ 216.018260] Code: 15 48 c7 c6 9e 75 36 a0 48 c7 c7 90 49 35 a0 31 c0 e8 48 95 f2 ff 8b 83 5c 0c 00 00 89 c2 ff c0 48 c1 e2 02 48 03 93 50 0c 00 00
[ 216.018270] 2a 23 83 7c 0c 00 00 ff 8b 6c 0c 00 00 ff 8b 68 0c 00 00 89
[ 216.018275] RIP [<ffffffffa032de04>] radeon_ring_write+0x3e/0x5f [radeon]
[ 216.018286] RSP <ffff88011fc37ae8>
[ 216.018287] CR2: ffffc90411580ffc
[ 216.020004] ---[ end trace 0000000000000003 ]---
[ 216.072889] [drm:drm_release] *ERROR* Device busy: 1
Reply to: