Bug#637392:
Hello,
After upgrading to sid kernel (3.0.0-1-rt-amd64) I am unable to boot my machine at all. The screen goes to "white noise" mode, although I am able to move the mouse ... Please see attached dmesg output in out.txt file.
--
with best regards, Volodymyr
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-rt-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP PREEMPT RT Sun Jul 24 03:57:06 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64 root=UUID=b88c9b9a-8744-4408-a480-58770bb6671d ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer P5QL PRO/P5QL PRO, BIOS 1004 07/01/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ cff7a000-cff80000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffa000-130000000
[ 0.000000] RAMDISK: 374c0000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbb10 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff80000 00040 (v01 A_M_I_ OEMRSDT 07000901 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 07000901 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 08888 (v01 A1014 A1014001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 07000901 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 07000901 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 07000901 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff88cd0 00038 (v01 A_M_I_ OEMHPET 07000901 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff88d10 000B0 (v01 A_M_I_ OEMOSFR 07000901 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8e8d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048335
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 105 pages/cpu @ffff88012fc00000 s400640 r8192 d21248 u524288
[ 0.000000] pcpu-alloc: s400640 r8192 d21248 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031306
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64 root=UUID=b88c9b9a-8744-4408-a480-58770bb6671d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4045408k/4980736k available (3419k kernel code, 787396k absent, 147932k reserved, 3307k data, 884k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2497.562 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4995.12 BogoMIPS (lpj=9990248)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004149] Security Framework initialized
[ 0.004153] SELinux: Disabled at boot.
[ 0.004919] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008705] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009497] Mount-cache hash table entries: 256
[ 0.009771] Initializing cgroup subsys cpuacct
[ 0.009776] Initializing cgroup subsys memory
[ 0.009800] Initializing cgroup subsys devices
[ 0.009803] Initializing cgroup subsys freezer
[ 0.009804] Initializing cgroup subsys net_cls
[ 0.009807] Initializing cgroup subsys blkio
[ 0.009890] CPU: Physical Processor ID: 0
[ 0.009891] CPU: Processor Core ID: 0
[ 0.009893] mce: CPU supports 6 MCE banks
[ 0.009900] CPU0: Thermal monitoring enabled (TM2)
[ 0.009906] using mwait in idle threads.
[ 0.010258] ACPI: Core revision 20110413
[ 0.024387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064221] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.068003] APIC calibration not consistent with PM-Timer: 120ms instead of 100ms
[ 0.068003] APIC delta adjusted to PM-Timer: 2081243 (2506145)
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.080184] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100043] Booting Node 0, Processors #1
[ 0.100046] smpboot cpu 1: start_ip = 9a000
[ 0.192054] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.208079] #2
[ 0.208081] smpboot cpu 2: start_ip = 9a000
[ 0.300043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.316071] #3 Ok.
[ 0.316073] smpboot cpu 3: start_ip = 9a000
[ 0.408047] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.412036] Brought up 4 CPUs
[ 0.412038] Total of 4 processors activated (19980.11 BogoMIPS).
[ 0.414404] devtmpfs: initialized
[ 0.418182] PM: Registering ACPI NVS region at cff8e000 (270336 bytes)
[ 0.418182] print_constraints: dummy:
[ 0.418182] NET: Registered protocol family 16
[ 0.418182] ACPI: bus type pci registered
[ 0.418182] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.418182] PCI: not using MMCONFIG
[ 0.418182] PCI: Using configuration type 1 for base access
[ 0.420539] bio: create slab <bio-0> at 0
[ 0.421527] ACPI: EC: Look up EC in DSDT
[ 0.424594] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.449982] ACPI: SSDT 00000000cff8e0d0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.450380] ACPI: Dynamic OEM Table Load:
[ 0.450382] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.451696] ACPI: SSDT 00000000cff8e2d0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.452111] ACPI: Dynamic OEM Table Load:
[ 0.452113] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.453422] ACPI: SSDT 00000000cff8e4d0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.453817] ACPI: Dynamic OEM Table Load:
[ 0.453819] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.455129] ACPI: SSDT 00000000cff8e6d0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.455525] ACPI: Dynamic OEM Table Load:
[ 0.455526] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.456176] ACPI: Interpreter enabled
[ 0.456180] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.456268] ACPI: Using IOAPIC for interrupt routing
[ 0.456328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.459594] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.565877] ACPI: No dock devices found.
[ 0.565879] HEST: Table not found.
[ 0.565882] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.566084] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.566525] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.566528] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.566530] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.566532] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.566534] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.566552] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.566590] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.566617] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.566620] pci 0000:00:01.0: PME# disabled
[ 0.566658] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.566695] pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
[ 0.566738] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.566775] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
[ 0.566818] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.566855] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
[ 0.566905] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.566924] pci 0000:00:1a.7: reg 10: [mem 0xfe8ffc00-0xfe8fffff]
[ 0.566988] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.566992] pci 0000:00:1a.7: PME# disabled
[ 0.567016] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.567029] pci 0000:00:1b.0: reg 10: [mem 0xfe8f8000-0xfe8fbfff 64bit]
[ 0.567076] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.567079] pci 0000:00:1b.0: PME# disabled
[ 0.567100] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.567148] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.567151] pci 0000:00:1c.0: PME# disabled
[ 0.567175] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.567223] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.567226] pci 0000:00:1c.4: PME# disabled
[ 0.567247] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.567295] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.567298] pci 0000:00:1c.5: PME# disabled
[ 0.567322] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.567359] pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
[ 0.567401] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.567438] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
[ 0.567481] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.567517] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
[ 0.567568] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.567586] pci 0000:00:1d.7: reg 10: [mem 0xfe8ff800-0xfe8ffbff]
[ 0.567651] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.567655] pci 0000:00:1d.7: PME# disabled
[ 0.567675] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.567728] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.567827] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.567840] pci 0000:00:1f.2: reg 10: [io 0xa000-0xa007]
[ 0.567847] pci 0000:00:1f.2: reg 14: [io 0x9c00-0x9c03]
[ 0.567853] pci 0000:00:1f.2: reg 18: [io 0x9880-0x9887]
[ 0.567860] pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803]
[ 0.567867] pci 0000:00:1f.2: reg 20: [io 0x9480-0x948f]
[ 0.567873] pci 0000:00:1f.2: reg 24: [io 0x9400-0x940f]
[ 0.567910] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.567923] pci 0000:00:1f.3: reg 10: [mem 0xfe8ff400-0xfe8ff4ff 64bit]
[ 0.567941] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.567973] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.567986] pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007]
[ 0.567993] pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03]
[ 0.568000] pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887]
[ 0.568006] pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803]
[ 0.568013] pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f]
[ 0.568020] pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f]
[ 0.568101] pci 0000:01:00.0: [1002:9598] type 0 class 0x000300
[ 0.568113] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.568123] pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9effff 64bit]
[ 0.568130] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
[ 0.568141] pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.568158] pci 0000:01:00.0: supports D1 D2
[ 0.568184] pci 0000:01:00.1: [1002:aa20] type 0 class 0x000403
[ 0.568206] pci 0000:01:00.1: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.568253] pci 0000:01:00.1: supports D1 D2
[ 0.568280] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.568282] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.568285] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.568288] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.568326] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.568329] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.568333] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.568338] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.568391] pci 0000:03:00.0: [11ab:6101] type 0 class 0x000101
[ 0.568406] pci 0000:03:00.0: reg 10: [io 0xec00-0xec07]
[ 0.568417] pci 0000:03:00.0: reg 14: [io 0xe880-0xe883]
[ 0.568428] pci 0000:03:00.0: reg 18: [io 0xe800-0xe807]
[ 0.568438] pci 0000:03:00.0: reg 1c: [io 0xe480-0xe483]
[ 0.568449] pci 0000:03:00.0: reg 20: [io 0xe400-0xe40f]
[ 0.568460] pci 0000:03:00.0: reg 24: [mem 0xfebffc00-0xfebffdff]
[ 0.568501] pci 0000:03:00.0: supports D1
[ 0.568503] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.568507] pci 0000:03:00.0: PME# disabled
[ 0.568523] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.568532] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.568535] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.568538] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.568543] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.568600] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
[ 0.568621] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.568632] pci 0000:02:00.0: reg 18: [io 0xdc00-0xdc7f]
[ 0.568703] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.568707] pci 0000:02:00.0: PME# disabled
[ 0.568725] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.568734] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.568738] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.568741] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.568746] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.568800] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.568804] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.568807] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.568812] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.568815] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.568818] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.568820] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.568823] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.568826] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.568846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.569617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.569782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.570228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.570387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.570624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.570770] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.570775] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.570776] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.611850] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.611986] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.612146] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.612288] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.612423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.612558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.612693] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.612827] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.613109] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.613122] vgaarb: loaded
[ 0.613123] vgaarb: bridge control possible 0000:01:00.0
[ 0.613232] PCI: Using ACPI for IRQ routing
[ 0.618386] PCI: pci_cache_line_size set to 64 bytes
[ 0.618594] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.618599] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.618866] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.618874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.618877] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.636133] Switching to clocksource hpet
[ 0.639748] Switched to NOHz mode on CPU #0
[ 0.639872] Switched to NOHz mode on CPU #1
[ 0.639900] Switched to NOHz mode on CPU #2
[ 0.639911] Switched to NOHz mode on CPU #3
[ 0.642673] pnp: PnP ACPI init
[ 0.642698] ACPI: bus type pnp registered
[ 0.642907] pnp 00:00: [bus 00-ff]
[ 0.642913] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.642916] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.642919] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.642921] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.642924] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.642926] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.643025] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.643054] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.643193] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.643198] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.643287] pnp 00:02: [dma 4]
[ 0.643290] pnp 00:02: [io 0x0000-0x000f]
[ 0.643292] pnp 00:02: [io 0x0081-0x0083]
[ 0.643294] pnp 00:02: [io 0x0087]
[ 0.643296] pnp 00:02: [io 0x0089-0x008b]
[ 0.643299] pnp 00:02: [io 0x008f]
[ 0.643301] pnp 00:02: [io 0x00c0-0x00df]
[ 0.643359] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.643390] pnp 00:03: [io 0x0070-0x0071]
[ 0.643400] pnp 00:03: [irq 8]
[ 0.643465] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.643487] pnp 00:04: [io 0x0061]
[ 0.643546] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.643572] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.643577] pnp 00:05: [irq 13]
[ 0.643638] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.644380] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.644383] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.644385] pnp 00:06: [io 0x0290-0x029f]
[ 0.644530] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.644534] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.644894] pnp 00:07: [io 0x0010-0x001f]
[ 0.644896] pnp 00:07: [io 0x0022-0x003f]
[ 0.644898] pnp 00:07: [io 0x0044-0x004d]
[ 0.644901] pnp 00:07: [io 0x0050-0x005f]
[ 0.644903] pnp 00:07: [io 0x0062-0x0063]
[ 0.644905] pnp 00:07: [io 0x0065-0x006f]
[ 0.644907] pnp 00:07: [io 0x0072-0x007f]
[ 0.644909] pnp 00:07: [io 0x0080]
[ 0.644914] pnp 00:07: [io 0x0084-0x0086]
[ 0.644916] pnp 00:07: [io 0x0088]
[ 0.644918] pnp 00:07: [io 0x008c-0x008e]
[ 0.644920] pnp 00:07: [io 0x0090-0x009f]
[ 0.644922] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.644925] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.644927] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.644929] pnp 00:07: [io 0x0800-0x087f]
[ 0.644931] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.644933] pnp 00:07: [io 0x0500-0x057f]
[ 0.644936] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.644938] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.644940] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.644942] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.645107] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.645111] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.645115] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.645119] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.645123] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.645126] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.645133] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.645138] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.645355] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.645425] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.645608] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.645611] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.645676] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.645815] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.645958] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.645963] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.646380] pnp 00:0b: [io 0x0060]
[ 0.646383] pnp 00:0b: [io 0x0064]
[ 0.646385] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.646387] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.646539] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.646543] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.646547] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.647702] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.647708] pnp 00:0c: [irq 4]
[ 0.647710] pnp 00:0c: [dma 0 disabled]
[ 0.647849] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.647958] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.648130] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.648134] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.648686] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.648689] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.648691] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.648694] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.648696] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.648863] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.648868] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.648873] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.648878] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.648882] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.649322] pnp: PnP ACPI: found 15 devices
[ 0.649323] ACPI: ACPI bus type pnp unregistered
[ 0.658165] PCI: max bus depth: 1 pci_try_num: 2
[ 0.658204] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.658209] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.658214] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0400000-0xf07fffff]
[ 0.658218] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.658223] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.658225] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.658228] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.658231] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.658235] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.658237] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.658241] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf07fffff]
[ 0.658244] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.658249] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.658252] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.658256] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.658259] pci 0000:00:1c.4: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.658264] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.658267] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.658271] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.658274] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.658279] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.658280] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.658284] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.658287] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.658304] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.658308] pci 0000:00:01.0: setting latency timer to 64
[ 0.658312] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.658321] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.658325] pci 0000:00:1c.0: setting latency timer to 64
[ 0.658330] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.658333] pci 0000:00:1c.4: setting latency timer to 64
[ 0.658339] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.658342] pci 0000:00:1c.5: setting latency timer to 64
[ 0.658347] pci 0000:00:1e.0: setting latency timer to 64
[ 0.658350] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.658352] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.658354] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.658356] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.658358] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.658360] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.658361] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.658363] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.658365] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.658367] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf07fffff]
[ 0.658369] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.658371] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.658373] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.658374] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.658376] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.658378] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.658380] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.658382] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.658384] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.658385] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.658387] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.658389] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.658538] NET: Registered protocol family 2
[ 0.658957] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.661771] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.665779] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.667104] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.667108] TCP reno registered
[ 0.667184] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.667345] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.667728] NET: Registered protocol family 1
[ 0.667983] pci 0000:01:00.0: Boot video device
[ 0.668062] PCI: CLS 32 bytes, default 64
[ 0.668184] Unpacking initramfs...
[ 0.941140] Freeing initrd memory: 11456k freed
[ 0.945934] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.945938] Placing 64MB software IO TLB between ffff8800cbf7a000 - ffff8800cff7a000
[ 0.945940] software IO TLB at phys 0xcbf7a000 - 0xcff7a000
[ 0.947109] audit: initializing netlink socket (disabled)
[ 0.947133] type=2000 audit(1313340239.940:1): initialized
[ 0.971290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.990453] VFS: Disk quotas dquot_6.5.2
[ 0.990571] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.990732] msgmni has been set to 7923
[ 0.991228] alg: No test for stdrng (krng)
[ 0.991300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.991303] io scheduler noop registered
[ 0.991305] io scheduler deadline registered
[ 0.991342] io scheduler cfq registered (default)
[ 0.991614] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.991642] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.991723] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.991756] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.991835] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.991869] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.991952] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.991985] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.992439] ERST: Table is not found!
[ 0.992565] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.012916] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.264598] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.308427] Linux agpgart interface v0.103
[ 1.309396] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.312146] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.312155] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.312378] mousedev: PS/2 mouse device common for all mice
[ 1.312441] rtc_cmos 00:03: RTC can wake from S4
[ 1.312604] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.312695] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.312735] cpuidle: using governor ladder
[ 1.312736] cpuidle: using governor menu
[ 1.313851] TCP cubic registered
[ 1.313953] NET: Registered protocol family 10
[ 1.316354] Mobile IPv6
[ 1.316358] NET: Registered protocol family 17
[ 1.316364] Registering the dns_resolver key type
[ 1.316597] PM: Hibernation image not present or could not be loaded.
[ 1.316627] registered taskstats version 1
[ 1.326588] rtc_cmos 00:03: setting system clock to 2011-08-14 16:44:01 UTC (1313340241)
[ 1.326670] Initializing network drop monitor service
[ 1.328907] Freeing unused kernel memory: 884k freed
[ 1.329167] Write protecting the kernel read-only data: 6144k
[ 1.331870] Freeing unused kernel memory: 660k freed
[ 1.334965] Freeing unused kernel memory: 720k freed
[ 1.355672] udev[66]: starting version 164
[ 1.463211] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.463224] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.464208] usbcore: registered new interface driver usbfs
[ 1.464719] usbcore: registered new interface driver hub
[ 1.464780] SCSI subsystem initialized
[ 1.466566] usbcore: registered new device driver usb
[ 1.470663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.470717] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.470742] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.470746] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.470790] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.470828] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.470968] libata version 3.00 loaded.
[ 1.474703] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.474802] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00
[ 1.488088] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.493061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.493064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.493066] usb usb1: Product: EHCI Host Controller
[ 1.493072] usb usb1: Manufacturer: Linux 3.0.0-1-rt-amd64 ehci_hcd
[ 1.493074] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.493938] hub 1-0:1.0: USB hub found
[ 1.493949] hub 1-0:1.0: 6 ports detected
[ 1.494184] ata_piix 0000:00:1f.2: version 2.13
[ 1.494211] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.494216] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.494293] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.495059] scsi0 : ata_piix
[ 1.495273] scsi1 : ata_piix
[ 1.502458] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 1.502463] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 1.502512] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.502557] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.502560] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.502578] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.502615] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.506501] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.506596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800
[ 1.520033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.520121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.520123] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.520125] usb usb2: Product: EHCI Host Controller
[ 1.520127] usb usb2: Manufacturer: Linux 3.0.0-1-rt-amd64 ehci_hcd
[ 1.520128] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.520344] hub 2-0:1.0: USB hub found
[ 1.520355] hub 2-0:1.0: 6 ports detected
[ 1.520592] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.520596] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.520658] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.521297] scsi2 : ata_piix
[ 1.521460] scsi3 : ata_piix
[ 1.527130] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 1.527133] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 1.563984] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.564206] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.564216] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.564219] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.564257] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.564371] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.564457] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.564459] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564461] usb usb3: Product: UHCI Host Controller
[ 1.564463] usb usb3: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.564464] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.565711] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.565751] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.567170] hub 3-0:1.0: USB hub found
[ 1.567182] hub 3-0:1.0: 2 ports detected
[ 1.567538] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.567548] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.567551] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.567569] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.567693] scsi4 : pata_marvell
[ 1.567710] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.567798] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.567800] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.567802] usb usb4: Product: UHCI Host Controller
[ 1.567803] usb usb4: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.567805] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.567830] scsi5 : pata_marvell
[ 1.567957] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.567959] ata6: DUMMY
[ 1.568148] hub 4-0:1.0: USB hub found
[ 1.568160] hub 4-0:1.0: 2 ports detected
[ 1.568491] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.568502] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.568505] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.568521] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.568634] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 1.568723] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.568725] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.568727] usb usb5: Product: UHCI Host Controller
[ 1.568728] usb usb5: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.568730] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.568954] hub 5-0:1.0: USB hub found
[ 1.568965] hub 5-0:1.0: 2 ports detected
[ 1.569571] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.569580] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.569582] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.569601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.569673] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.569756] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.569758] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.569760] usb usb6: Product: UHCI Host Controller
[ 1.569762] usb usb6: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.569763] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.569972] hub 6-0:1.0: USB hub found
[ 1.569982] hub 6-0:1.0: 2 ports detected
[ 1.570177] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.570184] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.570187] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.570201] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.570284] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.570366] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.570368] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.570370] usb usb7: Product: UHCI Host Controller
[ 1.570372] usb usb7: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.570373] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.570598] hub 7-0:1.0: USB hub found
[ 1.570609] hub 7-0:1.0: 2 ports detected
[ 1.570799] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.570807] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.570810] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.570825] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.570910] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.570991] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.570993] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.570995] usb usb8: Product: UHCI Host Controller
[ 1.570996] usb usb8: Manufacturer: Linux 3.0.0-1-rt-amd64 uhci_hcd
[ 1.570998] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.571207] hub 8-0:1.0: USB hub found
[ 1.571220] hub 8-0:1.0: 2 ports detected
[ 1.749843] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.751648] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.753488] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.755292] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.757130] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.757136] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 1.854618] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.865267] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.944020] Refined TSC clocksource calibration: 2497.499 MHz.
[ 1.944025] Switching to clocksource tsc
[ 1.961823] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.963628] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.965461] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.967268] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.969099] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 1.969105] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.173821] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.175626] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.177459] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.179263] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.181103] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.181108] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.296060] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.296072] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.296082] ata2.01: link offline, clearing class 3 to NONE
[ 2.296202] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.296217] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.304232] ata2.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66
[ 2.304619] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 2.304622] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.312606] ata1.00: configured for UDMA/133
[ 2.312795] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 2.320129] ata2.00: configured for UDMA/66
[ 2.321020] scsi 1:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5
[ 2.348623] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.348731] sd 0:0:0:0: [sda] Write Protect is off
[ 2.348733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.348778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.351498] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.351501] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.351885] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.385841] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.387646] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.389505] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.391310] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.393142] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.393147] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.403870] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.404635] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.412533] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.413699] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.597837] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.599654] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.601607] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.603493] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.605330] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.605336] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.605338] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2.662300] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.664564] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.666834] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.668830] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.670634] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.670639] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.873837] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.875643] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.877485] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.879289] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.881134] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 2.881140] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 2.947199] PM: Starting manual resume from disk
[ 2.947201] PM: Hibernation image partition 8:7 present
[ 2.947203] PM: Looking for hibernation image.
[ 2.947394] PM: Image not found (code -22)
[ 2.947395] PM: Hibernation image not present or could not be loaded.
[ 3.003641] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.085882] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.087738] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.089617] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.091461] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.093324] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.093330] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.297839] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.299644] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.301485] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.303297] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.305130] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.305136] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.509842] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.511677] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.513512] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.515319] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.517166] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.517171] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.517173] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 3.573830] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.575634] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.577468] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.579272] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.581106] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.581111] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.785892] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.787697] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.789539] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.791343] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.793174] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.793180] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 3.997848] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 3.999669] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.001507] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.003311] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.005145] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.005151] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.209836] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.211641] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.213475] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.215282] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.217155] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.217160] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.421869] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.423696] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.425533] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.427356] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.429189] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.429195] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.429197] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 4.485834] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.487639] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.489494] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.491329] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.493179] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.493184] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.697825] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.699631] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.701602] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.703412] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.705242] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.705248] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.909823] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.911627] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.913456] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.915292] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.917122] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 4.917128] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 4.965479] udev[466]: starting version 164
[ 5.121852] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.123709] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.125626] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.127505] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.129409] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.129416] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.334084] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.336035] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.337984] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.339897] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.341775] ehci_hcd 0000:00:1a.7: port 2 reset error -110
[ 5.341781] hub 1-0:1.0: hub_port_status failed (err = -32)
[ 5.341783] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 5.341800] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 5.464065] usb 2-3: new high speed USB device number 2 using ehci_hcd
[ 5.475383] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 5.479057] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.479064] ACPI: Power Button [PWRB]
[ 5.479166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.479171] ACPI: Power Button [PWRF]
[ 5.521158] ACPI: acpi_idle registered with cpuidle
[ 5.624897] usb 2-3: New USB device found, idVendor=145f, idProduct=0142
[ 5.624900] usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 5.624902] usb 2-3: Product: Trust Webcam
[ 5.624904] usb 2-3: Manufacturer:
[ 5.761593] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.862153] [drm] Initialized drm 1.1.0 20060810
[ 5.925177] [drm] radeon kernel modesetting enabled.
[ 5.925267] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.925272] radeon 0000:01:00.0: setting latency timer to 64
[ 5.925653] [drm] initializing kernel modesetting (RV635 0x1002:0x9598).
[ 5.925691] [drm] register mmio base: 0xFE9E0000
[ 5.925692] [drm] register mmio size: 65536
[ 5.925959] ATOM BIOS: RV635PRO
[ 5.925986] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 5.925989] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 5.925995] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 5.925997] [drm] Detected VRAM RAM=512M, BAR=256M
[ 5.925998] [drm] RAM width 128bits DDR
[ 5.926104] [TTM] Zone kernel: Available graphics memory: 2029564 kiB.
[ 5.926105] [TTM] Initializing pool allocator.
[ 5.926144] [drm] radeon: 512M of VRAM memory ready
[ 5.926146] [drm] radeon: 512M of GTT memory ready.
[ 5.926192] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.926193] [drm] Driver supports precise vblank timestamp query.
[ 5.926232] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[ 5.926236] radeon 0000:01:00.0: radeon: using MSI.
[ 5.926338] [drm] radeon: irq initialized.
[ 5.926342] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.927015] [drm] Loading RV635 Microcode
[ 5.953399] Linux media interface: v0.10
[ 5.971323] Linux video capture interface: v2.00
[ 6.016863] uvcvideo: Found UVC 1.00 device Trust Webcam (145f:0142)
[ 6.024369] input: Trust Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input3
[ 6.024503] usbcore: registered new interface driver uvcvideo
[ 6.024505] USB Video Class driver (v1.1.0)
[ 6.092029] usb 7-2: new full speed USB device number 2 using uhci_hcd
[ 6.199793] r600_cp: Failed to load firmware "radeon/RV635_pfp.bin"
[ 6.199796] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 6.199799] radeon 0000:01:00.0: disabling GPU acceleration
[ 6.200886] radeon 0000:01:00.0: ffff880126eb5800 unpin not necessary
[ 6.200890] radeon 0000:01:00.0: ffff880126eb5800 unpin not necessary
[ 6.200917] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 6.202165] [drm] Radeon Display Connectors
[ 6.202167] [drm] Connector 0:
[ 6.202168] [drm] DVI-I
[ 6.202169] [drm] HPD1
[ 6.202170] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 6.202172] [drm] Encoders:
[ 6.202173] [drm] DFP1: INTERNAL_UNIPHY
[ 6.202174] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.202175] [drm] Connector 1:
[ 6.202176] [drm] DIN
[ 6.202177] [drm] Encoders:
[ 6.202178] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 6.202179] [drm] Connector 2:
[ 6.202180] [drm] DVI-I
[ 6.202181] [drm] HPD2
[ 6.202182] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.202184] [drm] Encoders:
[ 6.202185] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.202186] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 6.248319] usb 7-2: New USB device found, idVendor=045e, idProduct=070f
[ 6.248321] usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.248323] usb 7-2: Product: Microsoft LifeChat LX-3000
[ 6.265158] [drm] Internal thermal controller with fan control
[ 6.265259] [drm] radeon: power management initialized
[ 6.288122] 2:3:1: cannot get freq at ep 0x84
[ 6.301186] usbcore: registered new interface driver snd-usb-audio
[ 6.353989] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.354091] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.354220] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.358576] [drm] fb mappable at 0xD0040000
[ 6.358577] [drm] vram apper at 0xD0000000
[ 6.358579] [drm] size 8294400
[ 6.358580] [drm] fb depth is 24
[ 6.358581] [drm] pitch is 7680
[ 6.358692] fbcon: radeondrmfb (fb0) is primary device
[ 6.387442] input: Microsoft LifeChat LX-3000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input4
[ 6.387601] generic-usb 0003:045E:070F.0001: input,hidraw0: USB HID v1.00 Device [Microsoft LifeChat LX-3000 ] on usb-0000:00:1d.1-2/input3
[ 6.387641] usbcore: registered new interface driver usbhid
[ 6.387642] usbhid: USB HID core driver
[ 6.488033] usb 8-1: new low speed USB device number 2 using uhci_hcd
[ 6.581028] Console: switching to colour frame buffer device 240x67
[ 6.585913] fb0: radeondrmfb frame buffer device
[ 6.585915] drm: registered panic notifier
[ 6.585929] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[ 6.641522] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.644796] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.644874] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 6.644988] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.670191] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.670768] input: HDA ATI HDMI HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input6
[ 6.744162] usb 8-1: New USB device found, idVendor=04d9, idProduct=1603
[ 6.744165] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.744168] usb 8-1: Product: USB Keyboard
[ 6.744170] usb 8-1: Manufacturer:
[ 6.795495] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input7
[ 6.795660] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.2-1/input0
[ 6.888317] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input8
[ 6.888473] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.2-1/input1
[ 7.128027] usb 8-2: new low speed USB device number 3 using uhci_hcd
[ 7.310162] usb 8-2: New USB device found, idVendor=045e, idProduct=0047
[ 7.310165] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 7.310167] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 7.310169] usb 8-2: Manufacturer: Microsoft
[ 7.328494] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input9
[ 7.328707] generic-usb 0003:045E:0047.0004: input,hidraw3: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 7.845182] Adding 2882556k swap on /dev/sda7. Priority:-1 extents:1 across:2882556k
[ 7.851123] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 8.013684] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 8.195478] loop: module loaded
[ 8.757570] fuse init (API version 7.16)
[ 10.229576] ATL1E 0000:02:00.0: irq 46 for MSI/MSI-X
[ 10.229776] ATL1E 0000:02:00.0: eth0: NIC Link is Up <1000 Mbps Full Duplex>
[ 10.230141] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.230531] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.553195] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 16.422073] Bluetooth: Core ver 2.16
[ 16.422179] NET: Registered protocol family 31
[ 16.422181] Bluetooth: HCI device and connection manager initialized
[ 16.422184] Bluetooth: HCI socket layer initialized
[ 16.422186] Bluetooth: L2CAP socket layer initialized
[ 16.422247] Bluetooth: SCO socket layer initialized
[ 16.536985] Bluetooth: RFCOMM TTY layer initialized
[ 16.537009] Bluetooth: RFCOMM socket layer initialized
[ 16.537010] Bluetooth: RFCOMM ver 1.11
[ 16.825854] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.825861] Bluetooth: BNEP filters: protocol multicast
[ 16.849978] lp: driver loaded but no devices found
[ 16.868706] ppdev: user-space parallel port driver
[ 16.932894] Bridge firewalling registered
[ 17.171964] sshd (2716): /proc/2716/oom_adj is deprecated, please use /proc/2716/oom_score_adj instead.
[ 20.944011] eth0: no IPv6 routers present
Reply to: