Bug#627019: linux-image-2.6.39-rc7-686-pae: several kernel hangs before geting to login
Package: linux-2.6
Version: 2.6.39~rc7-1~experimental.1
Severity: normal
Tags: experimental
I see several segfaults and hangs during boot per each successfult login.
There are 4 or 5 different messages ( segfault, hang, error, etc) that show up consistently while the kernel is loading.
I've taken many photos but have not been able get them off my SD card yet.
Both of my card readers are initialized, but none of my SD cards are recognized when I plug them in.
My usb stick shows up so (crossing fingers) I'll be able to add fotos showing some of segfaaults, etc soon.
Attaching full dmesg with segfault starting at
[8.755883] BUG: unable to handle kernel NULL pointer dereference at (null)
udevd and modprobe also segfault.
which should show in fotos.
-- Package-specific info:
** Version:
Linux version 2.6.39-rc7-686-pae (Debian 2.6.39~rc7-1~experimental.1) (maks@debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Thu May 12 11:21:50 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc7-686-pae root=UUID=9fba1255-6dc4-444c-93f8-3e8130eddc60 ro
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[ 9.218914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.312981] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.324682] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.354580] intel_rng: Firmware space is locked read-only. If you can't or
[ 9.354583] intel_rng: don't want to disable this in firmware setup, and if
[ 9.354585] intel_rng: you are certain that your system has a functional
[ 9.354587] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 9.521119] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB002
[ 9.523449] usbcore: registered new interface driver usblp
[ 9.542053] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.983708] Linux video capture interface: v2.00
[ 10.287418] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.289844] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.629223] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 10.631810] cx8800 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.638475] cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected], frontend(s): 0
[ 10.640867] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 10.651427] cx2388x alsa driver version 0.0.8 loaded
[ 10.724027] intel8x0_measure_ac97_clock: measured 55951 usecs (2696 samples)
[ 10.726519] intel8x0: clocking to 48000
[ 10.779211] IR NEC protocol handler initialized
[ 10.855803] i2c-core: driver [tuner] using legacy suspend method
[ 10.858432] i2c-core: driver [tuner] using legacy resume method
[ 10.868641] IR RC5(x) protocol handler initialized
[ 11.019253] IR RC6 protocol handler initialized
[ 11.086974] IR JVC protocol handler initialized
[ 11.216305] IR Sony protocol handler initialized
[ 11.532828] tda9887 15-0043: creating new instance
[ 11.535171] tda9887 15-0043: tda988[5/6/7] found
[ 11.538233] tuner 15-0043: Tuner 74 found with type(s) Radio TV.
[ 11.543925] tuner 15-0061: Tuner -1 found with type(s) Radio TV.
[ 11.584508] tveeprom 15-0050: Hauppauge model 34132, rev J158, serial# 2843606
[ 11.586792] tveeprom 15-0050: tuner model is Philips FM1236 MK3 (idx 58, type 43)
[ 11.589280] tveeprom 15-0050: TV standards NTSC(M) (eeprom 0x08)
[ 11.591612] tveeprom 15-0050: audio processor is CX880 (idx 30)
[ 11.594007] tveeprom 15-0050: has radio
[ 11.596383] cx88[0]: warning: unknown hauppauge model #34132
[ 11.598686] cx88[0]: hauppauge eeprom: model=34132
[ 11.663931] lirc_dev: IR Remote Control driver registered, major 251
[ 11.668718] IR LIRC bridge handler initialized
[ 11.733497] tuner-simple 15-0061: creating new instance
[ 11.736108] tuner-simple 15-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[ 11.940036] Registered IR keymap rc-hauppauge
[ 11.942765] input: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:02:02.0/rc/rc0/input5
[ 11.945543] rc0: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:02:02.0/rc/rc0
[ 11.948303] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 11.951873] cx88[0]/0: found at 0000:02:02.0, rev: 5, irq: 17, latency: 32, mmio: 0xfc000000
[ 11.958898] cx88[0]/0: registered device video0 [v4l2]
[ 11.963923] cx88[0]/0: registered device vbi0
[ 11.968880] cx88[0]/0: registered device radio0
[ 11.972171] cx88_audio 0000:02:02.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.977104] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 15.564611] REISERFS (device sdb5): found reiserfs format "3.6" with standard journal
[ 15.567285] REISERFS (device sdb5): using ordered data mode
[ 15.575682] REISERFS (device sdb5): journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 15.581412] REISERFS (device sdb5): checking transaction log (sdb5)
[ 15.600678] REISERFS (device sdb5): replayed 1 transactions in 0 seconds
[ 15.651665] REISERFS (device sdb5): Using r5 hash to sort names
[ 15.696250] XFS (sda8): Mounting Filesystem
[ 16.270069] XFS (sda8): Ending clean mount
[ 17.293469] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.317657] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 17.320131] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.232373] fuse init (API version 7.16)
[ 27.584012] eth0: no IPv6 routers present
[ 34.534314] lp: driver loaded but no devices found
[ 34.577441] ppdev: user-space parallel port driver
[ 34.667178] Bluetooth: Core ver 2.16
[ 34.670713] NET: Registered protocol family 31
[ 34.673019] Bluetooth: HCI device and connection manager initialized
[ 34.675244] Bluetooth: HCI socket layer initialized
[ 34.677368] Bluetooth: L2CAP socket layer initialized
[ 34.679826] Bluetooth: SCO socket layer initialized
[ 34.736294] Bluetooth: RFCOMM TTY layer initialized
[ 34.738493] Bluetooth: RFCOMM socket layer initialized
[ 34.740471] Bluetooth: RFCOMM ver 1.11
[ 34.755938] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.758035] Bluetooth: BNEP filters: protocol multicast
[ 35.981563] Netfilter messages via NETLINK v0.30.
[ 36.603197] device eth0 entered promiscuous mode
[ 41.206701] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 41.996450] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 44.792054] usb 3-2: USB disconnect, device number 2
[ 45.280073] usb 3-2: new low speed USB device number 3 using uhci_hcd
[ 45.470978] usb 3-2: New USB device found, idVendor=045e, idProduct=0040
[ 45.470985] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 45.470989] usb 3-2: Product: Microsoft Wheel Mouse Optical®
[ 45.470993] usb 3-2: Manufacturer: Microsoft
[ 45.489517] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 45.489712] generic-usb 0003:045E:0040.0002: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-2/input0
[ 46.104135] usb 3-2: USB disconnect, device number 3
[ 46.380039] usb 3-2: new low speed USB device number 4 using uhci_hcd
[ 46.561795] usb 3-2: New USB device found, idVendor=045e, idProduct=0040
[ 46.561801] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 46.561804] usb 3-2: Product: Microsoft Wheel Mouse Optical®
[ 46.561807] usb 3-2: Manufacturer: Microsoft
[ 46.580174] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[ 46.580450] generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-2/input0
[ 67.911946] gnome-settings-[1730]: segfault at b46f5c30 ip b46f5c30 sp bfb2312c error 4 in libdbus-1.so.3.5.5[b474a000+3c000]
[ 95.659502] gnome-settings-[2035]: segfault at b4718c30 ip b4718c30 sp bf807e8c error 4 in libdbus-1.so.3.5.5[b476d000+3c000]
** Model information
not available
** Loaded modules:
Module Size Used by
ip6table_filter 12492 1
ip6_tables 17069 1 ip6table_filter
iptable_filter 12488 1
ip_tables 16998 1 iptable_filter
ipt_ULOG 12561 1
x_tables 17969 5 ip6table_filter,ip6_tables,iptable_filter,ip_tables,ipt_ULOG
nfnetlink_queue 12801 1
nfnetlink 12786 2 nfnetlink_queue
bnep 17147 2
rfcomm 31961 0
bluetooth 92361 10 bnep,rfcomm
parport_pc 21895 0
ppdev 12621 0
lp 12858 0
parport 27018 3 parport_pc,ppdev,lp
rfkill 18510 2 bluetooth
crc16 12327 1 bluetooth
mperf 12387 0
speedstep_lib 12463 0
cpufreq_userspace 12520 0
cpufreq_stats 12670 0
cpufreq_powersave 12422 0
cpufreq_conservative 12987 0
autofs4 22558 1
binfmt_misc 12778 1
fuse 55666 1
reiserfs 178367 1
rc_hauppauge 12382 0
tuner_simple 16926 1
tuner_types 12305 1 tuner_simple
ir_lirc_codec 12651 0
lirc_dev 12797 1 ir_lirc_codec
tda9887 12573 1
ir_sony_decoder 12403 0
tda8290 17051 0
ir_jvc_decoder 12401 0
ir_rc6_decoder 12401 0
ir_rc5_decoder 12401 0
tuner 17237 2
ir_nec_decoder 12401 0
cx88_alsa 13045 1
cx8800 26721 0
cx88xx 67340 2 cx88_alsa,cx8800
rc_core 17813 9 rc_hauppauge,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx88xx
tveeprom 16473 1 cx88xx
v4l2_common 13026 3 tuner,cx8800,cx88xx
videobuf_dma_sg 12992 3 cx88_alsa,cx8800,cx88xx
snd_intel8x0 22287 2
snd_ac97_codec 83728 1 snd_intel8x0
ac97_bus 12462 1 snd_ac97_codec
snd_pcm_oss 35864 0
snd_mixer_oss 17649 1 snd_pcm_oss
snd_pcm 52731 4 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
videodev 57130 4 tuner,cx8800,cx88xx,v4l2_common
videobuf_core 17540 3 cx8800,cx88xx,videobuf_dma_sg
snd_seq_midi 12744 0
btcx_risc 12499 3 cx88_alsa,cx8800,cx88xx
snd_rawmidi 22407 1 snd_seq_midi
snd_seq_midi_event 13124 1 snd_seq_midi
snd_seq 39172 2 snd_seq_midi,snd_seq_midi_event
pcspkr 12515 0
usblp 17083 0
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 38189 16 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp 26653 0
soundcore 12878 1 snd
i2c_i801 12670 0
snd_page_alloc 12841 2 snd_intel8x0,snd_pcm
pci_hotplug 26303 1 shpchp
tpm_infineon 12675 0
rng_core 12550 0
tpm 17476 1 tpm_infineon
tpm_bios 12799 1 tpm
processor 26983 0
evdev 13084 0
xfs 528900 2
usbhid 35206 0
hid 59841 1 usbhid
usb_storage 34951 0
uas 12975 0
sg 21385 0
sd_mod 35060 5
crc_t10dif 12332 1 sd_mod
sr_mod 17418 0
cdrom 34631 1 sr_mod
ata_generic 12439 0
i915 286502 2
drm_kms_helper 26550 1 i915
uhci_hcd 21850 0
drm 133286 3 i915,drm_kms_helper
i2c_algo_bit 12706 2 cx88xx,i915
ata_piix 21079 3
libata 132100 2 ata_generic,ata_piix
ehci_hcd 34885 0
i2c_core 19022 14 tuner_simple,tda9887,tda8290,tuner,cx8800,cx88xx,tveeprom,v4l2_common,videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
usbcore 103321 7 usblp,usbhid,usb_storage,uas,uhci_hcd,ehci_hcd
floppy 47893 0
scsi_mod 134414 6 usb_storage,uas,sg,sd_mod,sr_mod,libata
e1000 84011 0
video 17345 1 i915
button 12783 1 i915
thermal_sys 17667 2 processor,video
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to CSA Bridge [8086:2573] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa900000-fa9fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: faa00000-fe9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation Device [8086:e00a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at feb7f800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at feb7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:01.0 Ethernet controller [0200]: Intel Corporation 82547EI Gigabit Ethernet Controller [8086:1019]
Subsystem: Intel Corporation Device [8086:3046]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa9e0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
02:02.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models [0070:3401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
02:02.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:3401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:b002 Hewlett-Packard PhotoSmart 7200 series
Bus 003 Device 004: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-rc7-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.39-rc7-686-pae depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-rc7-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-4 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-rc7-686-pae suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-rc7-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-rc7-686-pae/postinst/missing-firmware-2.6.39-rc7-686-pae:
linux-image-2.6.39-rc7-686-pae/postinst/ignoring-do-bootloader-2.6.39-rc7-686-pae:
linux-image-2.6.39-rc7-686-pae/prerm/removing-running-kernel-2.6.39-rc7-686-pae: true
linux-image-2.6.39-rc7-686-pae/postinst/depmod-error-initrd-2.6.39-rc7-686-pae: false
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-rc7-686-pae (Debian 2.6.39~rc7-1~experimental.1) (maks@debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Thu May 12 11:21:50 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ef2fc00 (usable)
[ 0.000000] BIOS-e820: 000000003ef2fc00 - 000000003ef30000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ef30000 - 000000003ef40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ef40000 - 000000003eff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003eff0000 - 000000003f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: /D865GRH , BIOS BF86510A.86A.0077.P25.0508040031 08/04/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3ef2f max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36dda000 - 376e5000
[ 0.000000] ACPI: RSDP 000f61e0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3ef30000 00038 (v01 INTEL D865GRH 20050804 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ef30200 00081 (v02 INTEL D865GRH 20050804 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ef30370 04305 (v01 INTEL D865GRH 00000001 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3ef40000 00040
[ 0.000000] ACPI: APIC 3ef30300 00068 (v01 INTEL D865GRH 20050804 MSFT 00000097)
[ 0.000000] ACPI: ASF! 3ef34680 00099 (v16 LEGEND I865PASF 00000001 MSFT 0100000D)
[ 0.000000] ACPI: TCPA 3ef34719 00034 (v01 INTEL TBLOEMID 00000001 MSFT 00000097)
[ 0.000000] ACPI: WDDT 3ef3474d 00040 (v01 INTEL OEMWDDT 00000001 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 117MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003ef2f
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ef2f
[ 0.000000] On node 0 totalpages: 257726
[ 0.000000] free_area_init_node: node 0, pgdat c1416280, node_mem_map f65fa200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 235 pages used for memmap
[ 0.000000] HighMem zone: 29766 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f000000 (gap: 3f000000:bfcf0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6200000 s30848 r0 d22400 u1048576
[ 0.000000] pcpu-alloc: s30848 r0 d22400 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255711
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc7-686-pae root=UUID=9fba1255-6dc4-444c-93f8-3e8130eddc60 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003ef2f)
[ 0.000000] Memory: 1007364k/1031356k available (2772k kernel code, 23540k reserved, 1438k data, 436k init, 120004k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141d000 - 0xc148a000 ( 436 kB)
[ 0.000000] .data : 0xc12b5334 - 0xc141cc80 (1438 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b5334 (2772 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f5c0e000 soft=f5c20000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.382 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.76 BogoMIPS (lpj=11969528)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004087] Security Framework initialized
[ 0.004095] SELinux: Disabled at boot.
[ 0.004129] Mount-cache hash table entries: 512
[ 0.004451] Initializing cgroup subsys ns
[ 0.004459] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004466] Initializing cgroup subsys cpuacct
[ 0.004492] Initializing cgroup subsys devices
[ 0.004497] Initializing cgroup subsys freezer
[ 0.004502] Initializing cgroup subsys net_cls
[ 0.004506] Initializing cgroup subsys blkio
[ 0.004562] CPU: Physical Processor ID: 0
[ 0.004567] CPU: Processor Core ID: 0
[ 0.004572] mce: CPU supports 4 MCE banks
[ 0.004586] CPU0: Thermal monitoring enabled (TM1)
[ 0.006084] ACPI: Core revision 20110316
[ 0.009038] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.009330] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049026] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.052002] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.052002] ... version: 0
[ 0.052002] ... bit width: 40
[ 0.052002] ... generic registers: 18
[ 0.052002] ... value mask: 000000ffffffffff
[ 0.052002] ... max period: 0000007fffffffff
[ 0.052002] ... fixed-purpose events: 0
[ 0.052002] ... event mask: 000000000003ffff
[ 0.052002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.052002] CPU 1 irqstacks, hard=f5c72000 soft=f5c74000
[ 0.052002] Booting Node 0, Processors #1 Ok.
[ 0.052002] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.140041] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.140097] Brought up 2 CPUs
[ 0.140107] Total of 2 processors activated (11970.47 BogoMIPS).
[ 0.140514] devtmpfs: initialized
[ 0.140514] PM: Registering ACPI NVS region at 3ef2fc00 (1024 bytes)
[ 0.140514] PM: Registering ACPI NVS region at 3ef40000 (720896 bytes)
[ 0.140514] print_constraints: dummy:
[ 0.140514] NET: Registered protocol family 16
[ 0.140514] ACPI: bus type pci registered
[ 0.141813] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.141819] PCI: Using configuration type 1 for base access
[ 0.142285] bio: create slab <bio-0> at 0
[ 0.144966] ACPI: EC: Look up EC in DSDT
[ 0.146304] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.148678] ACPI: Interpreter enabled
[ 0.148689] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.148720] ACPI: Using IOAPIC for interrupt routing
[ 0.152166] ACPI: Power Resource [URP1] (off)
[ 0.152222] ACPI: Power Resource [FDDP] (off)
[ 0.152279] ACPI: Power Resource [LPTP] (off)
[ 0.164135] ACPI: No dock devices found.
[ 0.164146] HEST: Table not found.
[ 0.164154] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.164246] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.164413] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.164417] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.164421] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.164424] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dffff] (ignored)
[ 0.164428] pci_root PNP0A03:00: host bridge window [mem 0x3f000000-0xffffffff] (ignored)
[ 0.164442] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[ 0.164447] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.164460] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.164513] pci 0000:00:02.0: [8086:2572] type 0 class 0x000300
[ 0.164527] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.164536] pci 0000:00:02.0: reg 14: [mem 0xfeb80000-0xfebfffff]
[ 0.164544] pci 0000:00:02.0: reg 18: [io 0xec00-0xec07]
[ 0.164591] pci 0000:00:03.0: [8086:2573] type 1 class 0x000604
[ 0.164627] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[ 0.164637] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.164713] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.164757] pci 0000:00:1d.0: reg 20: [io 0xc800-0xc81f]
[ 0.164790] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.164834] pci 0000:00:1d.1: reg 20: [io 0xcc00-0xcc1f]
[ 0.164867] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.164911] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
[ 0.164945] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.164989] pci 0000:00:1d.3: reg 20: [io 0xd400-0xd41f]
[ 0.165033] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.165056] pci 0000:00:1d.7: reg 10: [mem 0xfeb7fc00-0xfeb7ffff]
[ 0.165135] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.165141] pci 0000:00:1d.7: PME# disabled
[ 0.165160] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.165202] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.165266] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.165287] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[ 0.165301] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.165312] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.165322] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.165333] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.165343] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.165354] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.165381] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[ 0.165394] pci 0000:00:1f.2: reg 10: [io 0xe800-0xe807]
[ 0.165403] pci 0000:00:1f.2: reg 14: [io 0xe400-0xe403]
[ 0.165413] pci 0000:00:1f.2: reg 18: [io 0xe000-0xe007]
[ 0.165423] pci 0000:00:1f.2: reg 1c: [io 0xdc00-0xdc03]
[ 0.165432] pci 0000:00:1f.2: reg 20: [io 0xd800-0xd80f]
[ 0.165463] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.165507] pci 0000:00:1f.3: reg 20: [io 0xc400-0xc41f]
[ 0.165547] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[ 0.165576] pci 0000:00:1f.5: reg 18: [mem 0xfeb7f800-0xfeb7f9ff]
[ 0.165586] pci 0000:00:1f.5: reg 1c: [mem 0xfeb7f400-0xfeb7f4ff]
[ 0.165623] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.165628] pci 0000:00:1f.5: PME# disabled
[ 0.165656] pci 0000:01:01.0: [8086:1019] type 0 class 0x000200
[ 0.165671] pci 0000:01:01.0: reg 10: [mem 0xfa9e0000-0xfa9fffff]
[ 0.165687] pci 0000:01:01.0: reg 18: [io 0xbc00-0xbc1f]
[ 0.165727] pci 0000:01:01.0: PME# supported from D0 D3hot D3cold
[ 0.165731] pci 0000:01:01.0: PME# disabled
[ 0.165767] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.165775] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.165781] pci 0000:00:03.0: bridge window [mem 0xfa900000-0xfa9fffff]
[ 0.165786] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.165813] pci 0000:02:02.0: [14f1:8800] type 0 class 0x000400
[ 0.165831] pci 0000:02:02.0: reg 10: [mem 0xfc000000-0xfcffffff]
[ 0.165906] pci 0000:02:02.1: [14f1:8801] type 0 class 0x000480
[ 0.165922] pci 0000:02:02.1: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.166022] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.166030] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.166035] pci 0000:00:1e.0: bridge window [mem 0xfaa00000-0xfe9fffff]
[ 0.166041] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.166045] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.166048] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.166060] pci_bus 0000:00: on NUMA node 0
[ 0.166065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.166130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.166165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.169419] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.169505] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.169587] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.169672] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.169753] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.169836] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.169919] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.170003] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.170159] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.170183] vgaarb: loaded
[ 0.170235] PCI: Using ACPI for IRQ routing
[ 0.170242] PCI: pci_cache_line_size set to 64 bytes
[ 0.170329] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.170332] reserve RAM buffer: 000000003ef2fc00 - 000000003fffffff
[ 0.170572] hpet clockevent registered
[ 0.170579] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.170588] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.170598] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.176039] Switching to clocksource hpet
[ 0.177980] pnp: PnP ACPI init
[ 0.178006] ACPI: bus type pnp registered
[ 0.178123] pnp 00:00: [bus 00-ff]
[ 0.178127] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.178130] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.178133] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.178136] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.178139] pnp 00:00: [mem 0x000d8000-0x000dffff window]
[ 0.178142] pnp 00:00: [mem 0x3f000000-0xffffffff window]
[ 0.178214] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.178270] pnp 00:01: [dma 4]
[ 0.178273] pnp 00:01: [io 0x0000-0x000f]
[ 0.178276] pnp 00:01: [io 0x0081-0x0083]
[ 0.178279] pnp 00:01: [io 0x0087]
[ 0.178281] pnp 00:01: [io 0x0089-0x008b]
[ 0.178284] pnp 00:01: [io 0x008f]
[ 0.178286] pnp 00:01: [io 0x00c0-0x00df]
[ 0.178324] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.178340] pnp 00:02: [io 0x0070-0x0071]
[ 0.178353] pnp 00:02: [irq 8]
[ 0.178397] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.178435] pnp 00:03: [io 0x0060]
[ 0.178438] pnp 00:03: [io 0x0064]
[ 0.178444] pnp 00:03: [irq 1]
[ 0.178485] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.178630] pnp 00:04: [io 0x0061]
[ 0.178671] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.178684] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.178691] pnp 00:05: [irq 13]
[ 0.178732] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178821] pnp 00:06: [io 0x03f0-0x03f1]
[ 0.178825] pnp 00:06: [io 0x03f2-0x03f3]
[ 0.178827] pnp 00:06: [io 0x03f4-0x03f5]
[ 0.178830] pnp 00:06: [io 0x03f7]
[ 0.178836] pnp 00:06: [irq 6]
[ 0.178839] pnp 00:06: [dma 2]
[ 0.178910] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.179159] pnp 00:07: [io 0x0010-0x001f]
[ 0.179162] pnp 00:07: [io 0x0022-0x003f]
[ 0.179165] pnp 00:07: [io 0x0044-0x004d]
[ 0.179167] pnp 00:07: [io 0x0050-0x005f]
[ 0.179170] pnp 00:07: [io 0x0062-0x0063]
[ 0.179176] pnp 00:07: [io 0x0065-0x006f]
[ 0.179178] pnp 00:07: [io 0x0072-0x007f]
[ 0.179181] pnp 00:07: [io 0x0080]
[ 0.179183] pnp 00:07: [io 0x0084-0x0086]
[ 0.179186] pnp 00:07: [io 0x0088]
[ 0.179188] pnp 00:07: [io 0x008c-0x008e]
[ 0.179191] pnp 00:07: [io 0x0090-0x009f]
[ 0.179194] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.179196] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.179199] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.179293] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.179302] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179365] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.179368] pnp 00:08: [mem 0xfff80000-0xffffffff]
[ 0.179412] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.179596] pnp 00:09: [io 0x0400-0x047f]
[ 0.179599] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.179602] pnp 00:09: [io 0x0680-0x06ff]
[ 0.179605] pnp 00:09: [io 0x0500-0x053f]
[ 0.179608] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.179611] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.179614] pnp 00:09: [mem 0xfed20000-0xfed9ffff]
[ 0.179686] system 00:09: [io 0x0400-0x047f] has been reserved
[ 0.179694] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.179700] system 00:09: [io 0x0500-0x053f] has been reserved
[ 0.179708] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.179715] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.179722] system 00:09: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.179729] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179757] pnp 00:0a: [io 0x004e-0x004f]
[ 0.179760] pnp 00:0a: [io 0x4700-0x470b]
[ 0.179805] pnp 00:0a: Plug and Play ACPI device, IDs IFX0101 (active)
[ 0.179813] Switched to NOHz mode on CPU #0
[ 0.179934] Switched to NOHz mode on CPU #1
[ 0.180067] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.180071] pnp 00:0b: [mem 0x000c0000-0x000d7fff]
[ 0.180074] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.180077] pnp 00:0b: [mem 0x00100000-0x3effffff]
[ 0.180080] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.180164] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180172] system 00:0b: [mem 0x000c0000-0x000d7fff] could not be reserved
[ 0.180180] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.180187] system 00:0b: [mem 0x00100000-0x3effffff] could not be reserved
[ 0.180196] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180396] pnp: PnP ACPI: found 12 devices
[ 0.180402] ACPI: ACPI bus type pnp unregistered
[ 0.180409] PnPBIOS: Disabled by ACPI PNP
[ 0.217316] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[ 0.217330] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[ 0.217339] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.217345] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.217353] pci 0000:00:03.0: bridge window [mem 0xfa900000-0xfa9fffff]
[ 0.217360] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 0.217368] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.217373] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.217381] pci 0000:00:1e.0: bridge window [mem 0xfaa00000-0xfe9fffff]
[ 0.217388] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.217410] pci 0000:00:1e.0: setting latency timer to 64
[ 0.217415] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.217418] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.217422] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.217425] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfa9fffff]
[ 0.217428] pci_bus 0000:02: resource 1 [mem 0xfaa00000-0xfe9fffff]
[ 0.217432] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.217435] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.217499] NET: Registered protocol family 2
[ 0.217606] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.217954] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.218501] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.218812] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.218827] TCP reno registered
[ 0.218840] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.218856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219082] NET: Registered protocol family 1
[ 0.219114] pci 0000:00:02.0: Boot video device
[ 0.219231] PCI: CLS 64 bytes, default 64
[ 0.219298] Unpacking initramfs...
[ 0.549402] Freeing initrd memory: 9260k freed
[ 0.557356] audit: initializing netlink socket (disabled)
[ 0.557377] type=2000 audit(1305569760.552:1): initialized
[ 0.574846] highmem bounce pool size: 64 pages
[ 0.574858] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.577487] VFS: Disk quotas dquot_6.5.2
[ 0.577627] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.577796] msgmni has been set to 1751
[ 0.578105] alg: No test for stdrng (krng)
[ 0.578200] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.578209] io scheduler noop registered
[ 0.578214] io scheduler deadline registered
[ 0.578232] io scheduler cfq registered (default)
[ 0.578461] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.578467] vesafb: scrolling: redraw
[ 0.578473] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.578720] vesafb: framebuffer at 0xf0000000, mapped to 0xf8280000, using 1216k, total 1216k
[ 0.591431] Console: switching to colour frame buffer device 80x30
[ 0.604401] fb0: VESA VGA frame buffer device
[ 0.604697] ERST: Table is not found!
[ 0.604936] isapnp: Scanning for PnP cards...
[ 0.915550] isapnp: No Plug & Play device found
[ 0.915912] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.924553] Linux agpgart interface v0.103
[ 0.932574] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 0.940520] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 0.956303] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 0.964676] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 0.973041] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.981315] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.998486] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.006807] mousedev: PS/2 mouse device common for all mice
[ 1.015137] rtc_cmos 00:02: RTC can wake from S4
[ 1.023433] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.031735] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.040036] cpuidle: using governor ladder
[ 1.048107] cpuidle: using governor menu
[ 1.056419] TCP cubic registered
[ 1.064502] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.064949] NET: Registered protocol family 10
[ 1.068863] Mobile IPv6
[ 1.068880] NET: Registered protocol family 17
[ 1.068900] Registering the dns_resolver key type
[ 1.068986] Using IPI No-Shortcut mode
[ 1.069462] PM: Hibernation image not present or could not be loaded.
[ 1.069518] registered taskstats version 1
[ 1.129611] rtc_cmos 00:02: setting system clock to 2011-05-16 18:16:02 UTC (1305569762)
[ 1.145534] Initializing network drop monitor service
[ 1.153796] Freeing unused kernel memory: 436k freed
[ 1.162305] Write protecting the kernel text: 2776k
[ 1.170417] Write protecting the kernel read-only data: 1040k
[ 1.206988] udevd[47]: starting version 168
[ 1.317434] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.355368] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.364409] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.374628] e1000 0000:01:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.444166] Floppy drive(s): fd0 is 1.44M
[ 1.480067] e1000 0000:01:01.0: setting latency timer to 64
[ 1.481182] usbcore: registered new interface driver usbfs
[ 1.490794] ACPI: Sleep Button [SLPB]
[ 1.495999] usbcore: registered new interface driver hub
[ 1.496250] usbcore: registered new device driver usb
[ 1.522249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.533004] SCSI subsystem initialized
[ 1.547332] FDC 0 is a National Semiconductor PC87306
[ 1.556060] Refined TSC clocksource calibration: 2992.694 MHz.
[ 1.574894] Switching to clocksource tsc
[ 1.598235] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.608455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.611323] libata version 3.00 loaded.
[ 1.626488] ACPI: Power Button [PWRF]
[ 1.635437] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.635443] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.646092] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.680076] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.692683] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.692706] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb7fc00
[ 1.716031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.724645] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.733405] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.751033] usb usb1: Product: EHCI Host Controller
[ 1.759881] usb usb1: Manufacturer: Linux 2.6.39-rc7-686-pae ehci_hcd
[ 1.769224] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.778261] hub 1-0:1.0: USB hub found
[ 1.786659] hub 1-0:1.0: 8 ports detected
[ 1.794999] ata_piix 0000:00:1f.1: version 2.13
[ 1.795015] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.803436] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.811745] [drm] Initialized drm 1.1.0 20060810
[ 1.812195] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.814297] scsi0 : ata_piix
[ 1.828212] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.836832] scsi1 : ata_piix
[ 1.847308] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.856376] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.865937] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.876621] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.876628] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.885253] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.912070] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c800
[ 1.920217] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.928315] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.944322] usb usb2: Product: UHCI Host Controller
[ 1.952467] usb usb2: Manufacturer: Linux 2.6.39-rc7-686-pae uhci_hcd
[ 1.960610] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.968915] hub 2-0:1.0: USB hub found
[ 1.977005] hub 2-0:1.0: 2 ports detected
[ 1.985167] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.993453] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.001132] e1000 0000:01:01.0: eth0: (PCI:33MHz:32-bit) 00:0c:f1:8b:cb:04
[ 2.001155] e1000 0000:01:01.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.018108] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.018590] scsi2 : ata_piix
[ 2.026680] scsi3 : ata_piix
[ 2.035468] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 18
[ 2.043585] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 18
[ 2.048585] ata1.00: ATAPI: PIONEER DVD-RW DVR-108, 1.10, max UDMA/66
[ 2.056355] ata2.00: ATAPI: LITE-ON LTR-52246S, 6S0A, max UDMA/33
[ 2.056818] ata1.00: configured for UDMA/66
[ 2.075800] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.081752] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-108 1.10 PQ: 0 ANSI: 5
[ 2.099948] i915 0000:00:02.0: setting latency timer to 64
[ 2.115731] ata2.00: configured for UDMA/33
[ 2.124626] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.125667] [drm] Driver supports precise vblank timestamp query.
[ 2.134413] scsi 1:0:0:0: CD-ROM LITE-ON LTR-52246S 6S0A PQ: 0 ANSI: 5
[ 2.139289] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.141404] [drm] initialized overlay support
[ 2.236293] ata3.00: ATA-6: ST3160827AS, 3.42, max UDMA/133
[ 2.237728] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.252266] ata3.00: configured for UDMA/133
[ 2.253791] scsi 2:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5
[ 2.269149] checking generic (f0000000 130000) vs hw (f0000000 8000000)
[ 2.269155] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.271289] Console: switching to colour dummy device 80x25
[ 2.271864] fbcon: inteldrmfb (fb0) is primary device
[ 2.296382] ata4.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
[ 2.296387] ata4.00: 234441648 sectors, multi 16: LBA48
[ 2.312189] Console: switching to colour frame buffer device 160x64
[ 2.312365] ata4.00: configured for UDMA/133
[ 2.312525] scsi 3:0:0:0: Direct-Access ATA ST3120026AS 3.05 PQ: 0 ANSI: 5
[ 2.318404] fb0: inteldrmfb frame buffer device
[ 2.318436] drm: registered panic notifier
[ 2.318615] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.318723] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.318823] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.318830] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.318952] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.332076] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[ 2.332180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.332228] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.332275] usb usb3: Product: UHCI Host Controller
[ 2.332308] usb usb3: Manufacturer: Linux 2.6.39-rc7-686-pae uhci_hcd
[ 2.332350] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.332586] hub 3-0:1.0: USB hub found
[ 2.332647] hub 3-0:1.0: 2 ports detected
[ 2.332801] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.332857] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.332862] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.332907] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.344052] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 2.344133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.344181] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.344228] usb usb4: Product: UHCI Host Controller
[ 2.344261] usb usb4: Manufacturer: Linux 2.6.39-rc7-686-pae uhci_hcd
[ 2.344303] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.344521] hub 4-0:1.0: USB hub found
[ 2.344586] hub 4-0:1.0: 2 ports detected
[ 2.344722] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.344778] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.344782] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.344828] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.356041] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
[ 2.356123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.356171] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.356218] usb usb5: Product: UHCI Host Controller
[ 2.356253] usb usb5: Manufacturer: Linux 2.6.39-rc7-686-pae uhci_hcd
[ 2.356295] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.356503] hub 5-0:1.0: USB hub found
[ 2.358830] hub 5-0:1.0: 2 ports detected
[ 2.391297] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.393626] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.396178] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.417751] sr1: scsi3-mmc drive: 23x/52x writer cd/rw xa/form2 cdda tray
[ 2.422011] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 2.447178] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.450793] sd 2:0:0:0: [sda] Write Protect is off
[ 2.451199] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.452292] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.452469] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.452598] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.453218] sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.453324] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.453329] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.453373] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.470587] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.470606] usb 2-1: new full speed USB device number 2 using uhci_hcd
[ 2.472093] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.521405] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
[ 2.527144] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.566679] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 2.570295] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.670107] usb 2-1: New USB device found, idVendor=03f0, idProduct=b002
[ 2.674411] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.678946] usb 2-1: Product: photosmart 7200 series
[ 2.683676] usb 2-1: Manufacturer: hp
[ 2.688234] usb 2-1: SerialNumber: CN3792B1M3E0
[ 2.710127] usbcore: registered new interface driver uas
[ 2.721116] Initializing USB Mass Storage driver...
[ 2.723991] scsi4 : usb-storage 2-1:1.2
[ 2.726567] usbcore: registered new interface driver usb-storage
[ 2.729027] USB Mass Storage support registered.
[ 2.808029] usb 3-2: new low speed USB device number 2 using uhci_hcd
[ 2.993061] usb 3-2: New USB device found, idVendor=045e, idProduct=0040
[ 2.995597] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.998027] usb 3-2: Product: Microsoft Wheel Mouse Optical®
[ 3.000313] usb 3-2: Manufacturer: Microsoft
[ 3.038424] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
[ 3.041153] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-2/input0
[ 3.043509] usbcore: registered new interface driver usbhid
[ 3.046250] usbhid: USB HID core driver
[ 3.737937] scsi 4:0:0:0: Direct-Access HP photosmart 7200 1.00 PQ: 0 ANSI: 2
[ 3.742159] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 3.770923] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 4.993451] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 4.997891] SGI XFS Quota Management subsystem
[ 5.028037] XFS (sda6): Mounting Filesystem
[ 5.274557] XFS (sda6): Starting recovery (logdev: internal)
[ 6.343868] XFS (sda6): Ending recovery (logdev: internal)
[ 7.926781] udevd[314]: starting version 168
[ 8.754992] ACPI: acpi_idle registered with cpuidle
[ 8.755883] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 8.756013] IP: [< (null)>] (null)
[ 8.756013] *pdpt = 000000003757c001 *pde = 0000000000000000
[ 8.756013] Oops: 0000 [#1] SMP
[ 8.756013] last sysfs file: /sys/devices/virtual/tty/tty24/uevent
[ 8.756013] Modules linked in: processor evdev xfs usbhid hid usb_storage uas sg sd_mod crc_t10dif sr_mod cdrom ata_generic i915 drm_kms_helper uhci_hcd drm i2c_algo_bit ata_piix libata ehci_hcd i2c_core usbcore floppy scsi_mod e1000 video button thermal_sys [last unloaded: scsi_wait_scan]
[ 8.756013]
[ 8.756013] Pid: 406, comm: udevd Not tainted 2.6.39-rc7-686-pae #1 /D865GRH
[ 8.756013] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 8.756013] EIP is at 0x0
[ 8.756013] EAX: 00000000 EBX: 0000047a ECX: f777b0d9 EDX: 00000000
[ 8.756013] ESI: 0000047a EDI: 00000000 EBP: c1155b89 ESP: f72e9ce8
[ 8.756013] DS: 9d06 ES: 007b FS: b884 GS: 00e0 SS: 0068
[ 8.756013] Process udevd (pid: 406, ti=f72e8000 task=f743c820 task.ti=f7300000)
[ 8.756013] Stack:
[ 8.756013] 00002010 f5c08800 c1011cc7 f6307140 000003a3 0803c000 00001306 00000002
[ 8.756013] f6302198 f6302298 00000000 c101271e f6302198 f6309160 00000000 c1012603
[ 8.756013] 00000001 f6309190 00000000 f6309160 00000000 f63042b0 00000001 00000000
[ 8.756013] Call Trace:
[ 8.756013] [<c1011cc7>] ? p4_pmu_enable_event+0x102/0x10b
[ 8.756013] [<c101271e>] ? p4_pmu_enable_all+0x2a/0x37
[ 8.756013] [<c1012603>] ? x86_pmu_enable+0x1d1/0x243
[ 8.756013] [<c104eeb7>] ? hrtimer_forward+0x10f/0x123
[ 8.756013] [<c1052f5c>] ? timekeeping_get_ns+0x11/0x4f
[ 8.756013] [<c101b25a>] ? lapic_next_event+0x13/0x16
[ 8.756013] [<c10572d5>] ? clockevents_program_event+0xd2/0xe4
[ 8.756013] [<c10580b4>] ? tick_dev_program_event+0x1e/0xfc
[ 8.756013] [<c10581d6>] ? tick_program_event+0x14/0x17
[ 8.756013] [<c104f4e3>] ? hrtimer_interrupt+0x16c/0x236
[ 8.756013] [<c103b9fe>] ? irq_exit+0x56/0x79
[ 8.756013] [<c101bc27>] ? smp_apic_timer_interrupt+0x6b/0x75
[ 8.756013] [<c12af711>] ? apic_timer_interrupt+0x31/0x38
[ 8.756013] [<c105c361>] ? generic_exec_single+0x58/0x65
[ 8.756013] [<c102682b>] ? leave_mm+0x29/0x29
[ 8.756013] [<c105c4e0>] ? smp_call_function_single+0xd1/0xe2
[ 8.756013] [<c102682b>] ? leave_mm+0x29/0x29
[ 8.756013] [<c102682b>] ? leave_mm+0x29/0x29
[ 8.756013] [<f83aa000>] ? 0xf83a9fff
[ 8.756013] [<c105c716>] ? smp_call_function+0x17/0x1b
[ 8.756013] [<c105c727>] ? on_each_cpu+0xd/0x30
[ 8.756013] [<f83aa000>] ? 0xf83a9fff
[ 8.756013] [<c10a9b75>] ? kmap_flush_unused+0xf/0x16
[ 8.756013] [<c10241af>] ? change_page_attr_set_clr+0xf7/0x338
[ 8.756013] [<c10502d7>] ? down_timeout+0x36/0x3d
[ 8.756013] [<c12ae2e2>] ? mutex_lock+0xb/0x24
[ 8.756013] [<c12ae2e2>] ? mutex_lock+0xb/0x24
[ 8.756013] [<c12b215b>] ? kprobes_module_callback+0xf5/0x109
[ 8.756013] [<c11a9ed1>] ? acpi_ut_release_read_lock+0x40/0x45
[ 8.756013] [<c1051715>] ? lowest_in_progress+0x5d/0x66
[ 8.756013] [<c1024600>] ? change_page_attr_set+0x22/0x26
[ 8.756013] [<c1024617>] ? set_memory_rw+0x13/0x17
[ 8.756013] [<f83aa000>] ? 0xf83a9fff
[ 8.756013] [<c1060bdb>] ? sys_init_module+0xdca/0xe7f
[ 8.756013] [<c12b421f>] ? sysenter_do_call+0x12/0x28
[ 8.756013] Code: Bad EIP value.
[ 8.756013] EIP: [<00000000>] 0x0 SS:ESP 0068:f72e9ce8
[ 8.756013] CR2: 0000000000000000
[ 8.953223] ---[ end trace fcc38dd3185ddb39 ]---
[ 9.163552] tpm_inf_pnp 00:0a: Found TPM with ID IFX0101
[ 9.165879] tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base 0x4700, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
[ 9.218914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.312981] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.324682] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.354580] intel_rng: Firmware space is locked read-only. If you can't or
[ 9.354583] intel_rng: don't want to disable this in firmware setup, and if
[ 9.354585] intel_rng: you are certain that your system has a functional
[ 9.354587] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 9.521119] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB002
[ 9.523449] usbcore: registered new interface driver usblp
[ 9.542053] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.983708] Linux video capture interface: v2.00
[ 10.287418] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.289844] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.629223] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 10.631810] cx8800 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.638475] cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected], frontend(s): 0
[ 10.640867] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 10.651427] cx2388x alsa driver version 0.0.8 loaded
[ 10.724027] intel8x0_measure_ac97_clock: measured 55951 usecs (2696 samples)
[ 10.726519] intel8x0: clocking to 48000
[ 10.779211] IR NEC protocol handler initialized
[ 10.855803] i2c-core: driver [tuner] using legacy suspend method
[ 10.858432] i2c-core: driver [tuner] using legacy resume method
[ 10.868641] IR RC5(x) protocol handler initialized
[ 11.019253] IR RC6 protocol handler initialized
[ 11.086974] IR JVC protocol handler initialized
[ 11.216305] IR Sony protocol handler initialized
[ 11.532828] tda9887 15-0043: creating new instance
[ 11.535171] tda9887 15-0043: tda988[5/6/7] found
[ 11.538233] tuner 15-0043: Tuner 74 found with type(s) Radio TV.
[ 11.543925] tuner 15-0061: Tuner -1 found with type(s) Radio TV.
[ 11.584508] tveeprom 15-0050: Hauppauge model 34132, rev J158, serial# 2843606
[ 11.586792] tveeprom 15-0050: tuner model is Philips FM1236 MK3 (idx 58, type 43)
[ 11.589280] tveeprom 15-0050: TV standards NTSC(M) (eeprom 0x08)
[ 11.591612] tveeprom 15-0050: audio processor is CX880 (idx 30)
[ 11.594007] tveeprom 15-0050: has radio
[ 11.596383] cx88[0]: warning: unknown hauppauge model #34132
[ 11.598686] cx88[0]: hauppauge eeprom: model=34132
[ 11.663931] lirc_dev: IR Remote Control driver registered, major 251
[ 11.668718] IR LIRC bridge handler initialized
[ 11.733497] tuner-simple 15-0061: creating new instance
[ 11.736108] tuner-simple 15-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[ 11.940036] Registered IR keymap rc-hauppauge
[ 11.942765] input: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:02:02.0/rc/rc0/input5
[ 11.945543] rc0: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:02:02.0/rc/rc0
[ 11.948303] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 11.951873] cx88[0]/0: found at 0000:02:02.0, rev: 5, irq: 17, latency: 32, mmio: 0xfc000000
[ 11.958898] cx88[0]/0: registered device video0 [v4l2]
[ 11.963923] cx88[0]/0: registered device vbi0
[ 11.968880] cx88[0]/0: registered device radio0
[ 11.972171] cx88_audio 0000:02:02.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.977104] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 15.564611] REISERFS (device sdb5): found reiserfs format "3.6" with standard journal
[ 15.567285] REISERFS (device sdb5): using ordered data mode
[ 15.575682] REISERFS (device sdb5): journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 15.581412] REISERFS (device sdb5): checking transaction log (sdb5)
[ 15.600678] REISERFS (device sdb5): replayed 1 transactions in 0 seconds
[ 15.651665] REISERFS (device sdb5): Using r5 hash to sort names
[ 15.696250] XFS (sda8): Mounting Filesystem
[ 16.270069] XFS (sda8): Ending clean mount
[ 17.293469] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.317657] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 17.320131] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.232373] fuse init (API version 7.16)
[ 27.584012] eth0: no IPv6 routers present
[ 34.534314] lp: driver loaded but no devices found
[ 34.577441] ppdev: user-space parallel port driver
[ 34.667178] Bluetooth: Core ver 2.16
[ 34.670713] NET: Registered protocol family 31
[ 34.673019] Bluetooth: HCI device and connection manager initialized
[ 34.675244] Bluetooth: HCI socket layer initialized
[ 34.677368] Bluetooth: L2CAP socket layer initialized
[ 34.679826] Bluetooth: SCO socket layer initialized
[ 34.736294] Bluetooth: RFCOMM TTY layer initialized
[ 34.738493] Bluetooth: RFCOMM socket layer initialized
[ 34.740471] Bluetooth: RFCOMM ver 1.11
[ 34.755938] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.758035] Bluetooth: BNEP filters: protocol multicast
[ 35.981563] Netfilter messages via NETLINK v0.30.
[ 36.603197] device eth0 entered promiscuous mode
[ 41.206701] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 41.996450] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 44.792054] usb 3-2: USB disconnect, device number 2
[ 45.280073] usb 3-2: new low speed USB device number 3 using uhci_hcd
[ 45.470978] usb 3-2: New USB device found, idVendor=045e, idProduct=0040
[ 45.470985] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 45.470989] usb 3-2: Product: Microsoft Wheel Mouse Optical®
[ 45.470993] usb 3-2: Manufacturer: Microsoft
[ 45.489517] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 45.489712] generic-usb 0003:045E:0040.0002: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-2/input0
[ 46.104135] usb 3-2: USB disconnect, device number 3
[ 46.380039] usb 3-2: new low speed USB device number 4 using uhci_hcd
[ 46.561795] usb 3-2: New USB device found, idVendor=045e, idProduct=0040
[ 46.561801] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 46.561804] usb 3-2: Product: Microsoft Wheel Mouse Optical®
[ 46.561807] usb 3-2: Manufacturer: Microsoft
[ 46.580174] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[ 46.580450] generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-2/input0
[ 67.911946] gnome-settings-[1730]: segfault at b46f5c30 ip b46f5c30 sp bfb2312c error 4 in libdbus-1.so.3.5.5[b474a000+3c000]
[ 95.659502] gnome-settings-[2035]: segfault at b4718c30 ip b4718c30 sp bf807e8c error 4 in libdbus-1.so.3.5.5[b476d000+3c000]
Reply to: