|
Ben, I pointed apt to squeeze and fetched the 2.6.32-5-amd64 image and the issue persists. For these logs I've swapped the video to point to vesa (instead of tainting nvidia drivers), but I don't think it going to be relevant. I've attached the output from dmesg in this environment as requeasted - I don't think this is logging all of the events of interest, so I have also attached kern and xorg logs. There are logs of interest in kern.log where usb device fail to be configured (error -71), and it also looks like both usb 6-2 and generic-usb are trying to handle the device. I think we've ruled out that an issue was introduced between 2.6.32 and 2.6.38 kernel. Please let me know if you have any suggestions or if there's anything else I can do to help diagnose. > From: ben@decadent.org.uk > To: peter_murdoch770@hotmail.com; 626441@bugs.debian.org > Date: Sun, 15 May 2011 14:47:58 +0100 > Subject: Re: Bug#626441: general: When first logging in, usb wireless keyboard/mouse is not working > > On Sat, 2011-05-14 at 16:21 +0000, Peter . wrote: > > Ben, > > > > I have another box where uname -a returns: > > Linux crispy 2.6.32-5-686 #1 SMP Tue Mar 8 21:36:00 UTC 2011 i686 > > GNU/Linux > > > > The devices are working fine without the symptom when first logging in > > or swapping users. > > > > I've attached the dmesg from this box, but unfortunately the kernel is > > not the only difference on config. > [...] > > I really want to see a log from the same system where 2.6.38-2-amd64 > fails, so we can tell whether or not the bug has been introduced > recently. Is there some reason why you can't install > linux-image-2.6.32-5-amd64 (or another earlier version from > snapshot.debian.org) on that system? > > Ben. > > -- > Ben Hutchings > Once a job is fouled up, anything done to improve it makes it worse. |
[ 15.574] X.Org X Server 1.9.5 Release Date: 2011-03-17 [ 15.575] X Protocol Version 11, Revision 0 [ 15.575] Build Operating System: Linux 2.6.38-1-amd64 x86_64 Debian [ 15.575] Current Operating System: Linux CRiSPY-V2 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 [ 15.575] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet [ 15.575] Build Date: 26 March 2011 03:32:34AM [ 15.575] xorg-server 2:1.9.5-1 (Cyril Brulebois <kibi@debian.org>) [ 15.575] Current version of pixman: 0.21.8 [ 15.575] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 15.575] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 15.575] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 15 11:58:33 2011 [ 15.609] (==) Using config file: "/etc/X11/xorg.conf" [ 15.609] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 15.620] (==) ServerLayout "Layout0" [ 15.620] (**) |-->Screen "Screen0" (0) [ 15.620] (**) | |-->Monitor "Monitor0" [ 15.620] (**) | |-->Device "Device0" [ 15.620] (**) |-->Input Device "Keyboard0" [ 15.620] (**) |-->Input Device "Mouse0" [ 15.620] (==) Automatically adding devices [ 15.620] (==) Automatically enabling devices [ 15.674] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 15.674] Entry deleted from font path. [ 15.747] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType". [ 15.747] Entry deleted from font path. [ 15.747] (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"). [ 15.747] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 15.747] (==) ModulePath set to "/usr/lib/xorg/modules" [ 15.747] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 15.747] (WW) Disabling Keyboard0 [ 15.747] (WW) Disabling Mouse0 [ 15.747] (II) Loader magic: 0x7d1be0 [ 15.747] (II) Module ABI versions: [ 15.747] X.Org ANSI C Emulation: 0.4 [ 15.747] X.Org Video Driver: 8.0 [ 15.747] X.Org XInput driver : 11.0 [ 15.747] X.Org Server Extension : 4.0 [ 15.748] (--) PCI:*(0:1:0:0) 10de:0ca3:3842:1240 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288 [ 15.749] (II) Open ACPI successful (/var/run/acpid.socket) [ 15.749] (II) LoadModule: "extmod" [ 15.806] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 15.817] (II) Module extmod: vendor="X.Org Foundation" [ 15.817] compiled for 1.9.5, module version = 1.0.0 [ 15.817] Module class: X.Org Server Extension [ 15.817] ABI class: X.Org Server Extension, version 4.0 [ 15.817] (II) Loading extension SELinux [ 15.817] (II) Loading extension MIT-SCREEN-SAVER [ 15.817] (II) Loading extension XFree86-VidModeExtension [ 15.817] (II) Loading extension XFree86-DGA [ 15.817] (II) Loading extension DPMS [ 15.817] (II) Loading extension XVideo [ 15.817] (II) Loading extension XVideo-MotionCompensation [ 15.817] (II) Loading extension X-Resource [ 15.817] (II) LoadModule: "dbe" [ 15.817] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 15.819] (II) Module dbe: vendor="X.Org Foundation" [ 15.819] compiled for 1.9.5, module version = 1.0.0 [ 15.819] Module class: X.Org Server Extension [ 15.819] ABI class: X.Org Server Extension, version 4.0 [ 15.819] (II) Loading extension DOUBLE-BUFFER [ 15.819] (II) LoadModule: "glx" [ 15.819] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 16.296] (II) Module glx: vendor="NVIDIA Corporation" [ 16.302] compiled for 4.0.2, module version = 1.0.0 [ 16.302] Module class: X.Org Server Extension [ 16.302] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:10:15 PDT 2011 [ 16.302] (II) Loading extension GLX [ 16.302] (II) LoadModule: "record" [ 16.303] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 16.304] (II) Module record: vendor="X.Org Foundation" [ 16.304] compiled for 1.9.5, module version = 1.13.0 [ 16.304] Module class: X.Org Server Extension [ 16.304] ABI class: X.Org Server Extension, version 4.0 [ 16.304] (II) Loading extension RECORD [ 16.304] (II) LoadModule: "dri" [ 16.304] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 16.311] (II) Module dri: vendor="X.Org Foundation" [ 16.311] compiled for 1.9.5, module version = 1.0.0 [ 16.311] ABI class: X.Org Server Extension, version 4.0 [ 16.311] (II) Loading extension XFree86-DRI [ 16.311] (II) LoadModule: "dri2" [ 16.312] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 16.313] (II) Module dri2: vendor="X.Org Foundation" [ 16.313] compiled for 1.9.5, module version = 1.2.0 [ 16.313] ABI class: X.Org Server Extension, version 4.0 [ 16.313] (II) Loading extension DRI2 [ 16.313] (II) LoadModule: "vesa" [ 16.341] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 16.354] (II) Module vesa: vendor="X.Org Foundation" [ 16.354] compiled for 1.9.4, module version = 2.3.0 [ 16.354] Module class: X.Org Video Driver [ 16.354] ABI class: X.Org Video Driver, version 8.0 [ 16.354] (II) VESA: driver for VESA chipsets: vesa [ 16.354] (++) using VT number 7 [ 16.369] (II) Loading sub module "vbe" [ 16.369] (II) LoadModule: "vbe" [ 16.369] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 16.761] (II) Module vbe: vendor="X.Org Foundation" [ 16.761] compiled for 1.9.5, module version = 1.1.0 [ 16.761] ABI class: X.Org Video Driver, version 8.0 [ 16.761] (II) Loading sub module "int10" [ 16.761] (II) LoadModule: "int10" [ 16.762] (II) Loading /usr/lib/xorg/modules/libint10.so [ 16.770] (II) Module int10: vendor="X.Org Foundation" [ 16.770] compiled for 1.9.5, module version = 1.0.0 [ 16.770] ABI class: X.Org Video Driver, version 8.0 [ 16.770] (II) VESA(0): initializing int10 [ 16.770] (II) VESA(0): Bad V_BIOS checksum [ 16.770] (II) VESA(0): Primary V_BIOS segment is: 0xc000 [ 16.819] (II) VESA(0): VESA BIOS detected [ 16.819] (II) VESA(0): VESA VBE Version 3.0 [ 16.820] (II) VESA(0): VESA VBE Total Mem: 14336 kB [ 16.820] (II) VESA(0): VESA VBE OEM: NVIDIA [ 16.820] (II) VESA(0): VESA VBE OEM Software Rev: 112.21 [ 16.820] (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation [ 16.820] (II) VESA(0): VESA VBE OEM Product: GT215 Board - 06720001 [ 16.820] (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev [ 16.889] (**) VESA(0): Depth 24, (--) framebuffer bpp 32 [ 16.889] (==) VESA(0): RGB weight 888 [ 16.889] (==) VESA(0): Default visual is TrueColor [ 16.889] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) [ 16.889] (II) Loading sub module "ddc" [ 16.889] (II) LoadModule: "ddc" [ 16.889] (II) Module "ddc" already built-in [ 16.892] (II) VESA(0): VESA VBE DDC supported [ 16.892] (II) VESA(0): VESA VBE DDC Level none [ 16.892] (II) VESA(0): VESA VBE DDC transfer in appr. 0 sec. [ 17.076] (II) VESA(0): VESA VBE DDC read failed [ 17.077] (II) VESA(0): VESA VBE PanelID read failed [ 17.077] (II) VESA(0): Searching for matching VESA mode(s): [ 17.078] Mode: 100 (640x400) [ 17.078] ModeAttributes: 0x3bf [ 17.078] WinAAttributes: 0x7 [ 17.078] WinBAttributes: 0x0 [ 17.078] WinGranularity: 64 [ 17.078] WinSize: 64 [ 17.078] WinASegment: 0xa000 [ 17.078] WinBSegment: 0x0 [ 17.078] WinFuncPtr: 0xc0007631 [ 17.078] BytesPerScanline: 640 [ 17.078] XResolution: 640 [ 17.078] YResolution: 400 [ 17.078] XCharSize: 8 [ 17.078] YCharSize: 16 [ 17.078] NumberOfPlanes: 1 [ 17.078] BitsPerPixel: 8 [ 17.078] NumberOfBanks: 1 [ 17.078] MemoryModel: 4 [ 17.078] BankSize: 0 [ 17.078] NumberOfImages: 14 [ 17.078] RedMaskSize: 0 [ 17.078] RedFieldPosition: 0 [ 17.078] GreenMaskSize: 0 [ 17.078] GreenFieldPosition: 0 [ 17.078] BlueMaskSize: 0 [ 17.078] BlueFieldPosition: 0 [ 17.078] RsvdMaskSize: 0 [ 17.078] RsvdFieldPosition: 0 [ 17.078] DirectColorModeInfo: 0 [ 17.078] PhysBasePtr: 0xef000000 [ 17.078] LinBytesPerScanLine: 640 [ 17.078] BnkNumberOfImagePages: 14 [ 17.078] LinNumberOfImagePages: 14 [ 17.078] LinRedMaskSize: 0 [ 17.078] LinRedFieldPosition: 0 [ 17.078] LinGreenMaskSize: 0 [ 17.078] LinGreenFieldPosition: 0 [ 17.078] LinBlueMaskSize: 0 [ 17.078] LinBlueFieldPosition: 0 [ 17.078] LinRsvdMaskSize: 0 [ 17.078] LinRsvdFieldPosition: 0 [ 17.078] MaxPixelClock: 229500000 [ 17.079] Mode: 101 (640x480) [ 17.079] ModeAttributes: 0x3bf [ 17.079] WinAAttributes: 0x7 [ 17.079] WinBAttributes: 0x0 [ 17.079] WinGranularity: 64 [ 17.079] WinSize: 64 [ 17.079] WinASegment: 0xa000 [ 17.079] WinBSegment: 0x0 [ 17.079] WinFuncPtr: 0xc0007631 [ 17.079] BytesPerScanline: 640 [ 17.079] XResolution: 640 [ 17.079] YResolution: 480 [ 17.079] XCharSize: 8 [ 17.079] YCharSize: 16 [ 17.079] NumberOfPlanes: 1 [ 17.079] BitsPerPixel: 8 [ 17.079] NumberOfBanks: 1 [ 17.079] MemoryModel: 4 [ 17.079] BankSize: 0 [ 17.079] NumberOfImages: 10 [ 17.079] RedMaskSize: 0 [ 17.079] RedFieldPosition: 0 [ 17.079] GreenMaskSize: 0 [ 17.079] GreenFieldPosition: 0 [ 17.079] BlueMaskSize: 0 [ 17.079] BlueFieldPosition: 0 [ 17.079] RsvdMaskSize: 0 [ 17.079] RsvdFieldPosition: 0 [ 17.079] DirectColorModeInfo: 0 [ 17.080] PhysBasePtr: 0xef000000 [ 17.080] LinBytesPerScanLine: 640 [ 17.080] BnkNumberOfImagePages: 10 [ 17.080] LinNumberOfImagePages: 10 [ 17.080] LinRedMaskSize: 0 [ 17.080] LinRedFieldPosition: 0 [ 17.080] LinGreenMaskSize: 0 [ 17.080] LinGreenFieldPosition: 0 [ 17.080] LinBlueMaskSize: 0 [ 17.080] LinBlueFieldPosition: 0 [ 17.080] LinRsvdMaskSize: 0 [ 17.080] LinRsvdFieldPosition: 0 [ 17.080] MaxPixelClock: 229500000 [ 17.081] Mode: 102 (800x600) [ 17.081] ModeAttributes: 0x33f [ 17.081] WinAAttributes: 0x7 [ 17.081] WinBAttributes: 0x0 [ 17.081] WinGranularity: 64 [ 17.081] WinSize: 64 [ 17.081] WinASegment: 0xa000 [ 17.081] WinBSegment: 0x0 [ 17.081] WinFuncPtr: 0xc0007631 [ 17.081] BytesPerScanline: 100 [ 17.081] XResolution: 800 [ 17.081] YResolution: 600 [ 17.081] XCharSize: 8 [ 17.081] YCharSize: 16 [ 17.081] NumberOfPlanes: 4 [ 17.081] BitsPerPixel: 4 [ 17.081] NumberOfBanks: 1 [ 17.081] MemoryModel: 3 [ 17.081] BankSize: 0 [ 17.081] NumberOfImages: 2 [ 17.081] RedMaskSize: 0 [ 17.081] RedFieldPosition: 0 [ 17.081] GreenMaskSize: 0 [ 17.081] GreenFieldPosition: 0 [ 17.081] BlueMaskSize: 0 [ 17.081] BlueFieldPosition: 0 [ 17.081] RsvdMaskSize: 0 [ 17.081] RsvdFieldPosition: 0 [ 17.081] DirectColorModeInfo: 0 [ 17.081] PhysBasePtr: 0x0 [ 17.081] LinBytesPerScanLine: 100 [ 17.081] BnkNumberOfImagePages: 2 [ 17.081] LinNumberOfImagePages: 2 [ 17.081] LinRedMaskSize: 0 [ 17.081] LinRedFieldPosition: 0 [ 17.081] LinGreenMaskSize: 0 [ 17.081] LinGreenFieldPosition: 0 [ 17.081] LinBlueMaskSize: 0 [ 17.081] LinBlueFieldPosition: 0 [ 17.081] LinRsvdMaskSize: 0 [ 17.081] LinRsvdFieldPosition: 0 [ 17.081] MaxPixelClock: 108500000 [ 17.082] Mode: 103 (800x600) [ 17.082] ModeAttributes: 0x3bf [ 17.082] WinAAttributes: 0x7 [ 17.082] WinBAttributes: 0x0 [ 17.082] WinGranularity: 64 [ 17.082] WinSize: 64 [ 17.082] WinASegment: 0xa000 [ 17.082] WinBSegment: 0x0 [ 17.082] WinFuncPtr: 0xc0007631 [ 17.082] BytesPerScanline: 800 [ 17.082] XResolution: 800 [ 17.082] YResolution: 600 [ 17.082] XCharSize: 8 [ 17.082] YCharSize: 16 [ 17.082] NumberOfPlanes: 1 [ 17.082] BitsPerPixel: 8 [ 17.082] NumberOfBanks: 1 [ 17.082] MemoryModel: 4 [ 17.082] BankSize: 0 [ 17.082] NumberOfImages: 6 [ 17.082] RedMaskSize: 0 [ 17.082] RedFieldPosition: 0 [ 17.082] GreenMaskSize: 0 [ 17.082] GreenFieldPosition: 0 [ 17.082] BlueMaskSize: 0 [ 17.082] BlueFieldPosition: 0 [ 17.082] RsvdMaskSize: 0 [ 17.082] RsvdFieldPosition: 0 [ 17.082] DirectColorModeInfo: 0 [ 17.082] PhysBasePtr: 0xef000000 [ 17.082] LinBytesPerScanLine: 800 [ 17.082] BnkNumberOfImagePages: 6 [ 17.082] LinNumberOfImagePages: 6 [ 17.082] LinRedMaskSize: 0 [ 17.082] LinRedFieldPosition: 0 [ 17.082] LinGreenMaskSize: 0 [ 17.082] LinGreenFieldPosition: 0 [ 17.082] LinBlueMaskSize: 0 [ 17.082] LinBlueFieldPosition: 0 [ 17.082] LinRsvdMaskSize: 0 [ 17.082] LinRsvdFieldPosition: 0 [ 17.082] MaxPixelClock: 229500000 [ 17.084] Mode: 104 (1024x768) [ 17.084] ModeAttributes: 0x33f [ 17.084] WinAAttributes: 0x7 [ 17.084] WinBAttributes: 0x0 [ 17.084] WinGranularity: 64 [ 17.084] WinSize: 64 [ 17.084] WinASegment: 0xa000 [ 17.084] WinBSegment: 0x0 [ 17.084] WinFuncPtr: 0xc0007631 [ 17.084] BytesPerScanline: 128 [ 17.084] XResolution: 1024 [ 17.084] YResolution: 768 [ 17.084] XCharSize: 8 [ 17.084] YCharSize: 16 [ 17.084] NumberOfPlanes: 4 [ 17.084] BitsPerPixel: 4 [ 17.084] NumberOfBanks: 1 [ 17.084] MemoryModel: 3 [ 17.084] BankSize: 0 [ 17.084] NumberOfImages: 1 [ 17.084] RedMaskSize: 0 [ 17.084] RedFieldPosition: 0 [ 17.084] GreenMaskSize: 0 [ 17.084] GreenFieldPosition: 0 [ 17.084] BlueMaskSize: 0 [ 17.084] BlueFieldPosition: 0 [ 17.084] RsvdMaskSize: 0 [ 17.084] RsvdFieldPosition: 0 [ 17.084] DirectColorModeInfo: 0 [ 17.084] PhysBasePtr: 0x0 [ 17.084] LinBytesPerScanLine: 128 [ 17.084] BnkNumberOfImagePages: 1 [ 17.084] LinNumberOfImagePages: 1 [ 17.084] LinRedMaskSize: 0 [ 17.084] LinRedFieldPosition: 0 [ 17.084] LinGreenMaskSize: 0 [ 17.084] LinGreenFieldPosition: 0 [ 17.084] LinBlueMaskSize: 0 [ 17.084] LinBlueFieldPosition: 0 [ 17.084] LinRsvdMaskSize: 0 [ 17.084] LinRsvdFieldPosition: 0 [ 17.084] MaxPixelClock: 108500000 [ 17.085] Mode: 105 (1024x768) [ 17.085] ModeAttributes: 0x3bf [ 17.085] WinAAttributes: 0x7 [ 17.085] WinBAttributes: 0x0 [ 17.085] WinGranularity: 64 [ 17.085] WinSize: 64 [ 17.085] WinASegment: 0xa000 [ 17.085] WinBSegment: 0x0 [ 17.085] WinFuncPtr: 0xc0007631 [ 17.085] BytesPerScanline: 1024 [ 17.085] XResolution: 1024 [ 17.085] YResolution: 768 [ 17.085] XCharSize: 8 [ 17.085] YCharSize: 16 [ 17.085] NumberOfPlanes: 1 [ 17.085] BitsPerPixel: 8 [ 17.085] NumberOfBanks: 1 [ 17.085] MemoryModel: 4 [ 17.085] BankSize: 0 [ 17.085] NumberOfImages: 3 [ 17.085] RedMaskSize: 0 [ 17.085] RedFieldPosition: 0 [ 17.085] GreenMaskSize: 0 [ 17.085] GreenFieldPosition: 0 [ 17.085] BlueMaskSize: 0 [ 17.085] BlueFieldPosition: 0 [ 17.085] RsvdMaskSize: 0 [ 17.085] RsvdFieldPosition: 0 [ 17.085] DirectColorModeInfo: 0 [ 17.085] PhysBasePtr: 0xef000000 [ 17.085] LinBytesPerScanLine: 1024 [ 17.085] BnkNumberOfImagePages: 3 [ 17.085] LinNumberOfImagePages: 3 [ 17.085] LinRedMaskSize: 0 [ 17.085] LinRedFieldPosition: 0 [ 17.085] LinGreenMaskSize: 0 [ 17.085] LinGreenFieldPosition: 0 [ 17.085] LinBlueMaskSize: 0 [ 17.085] LinBlueFieldPosition: 0 [ 17.085] LinRsvdMaskSize: 0 [ 17.085] LinRsvdFieldPosition: 0 [ 17.085] MaxPixelClock: 229500000 [ 17.086] Mode: 10e (320x200) [ 17.087] ModeAttributes: 0x3bf [ 17.087] WinAAttributes: 0x7 [ 17.087] WinBAttributes: 0x0 [ 17.087] WinGranularity: 64 [ 17.087] WinSize: 64 [ 17.087] WinASegment: 0xa000 [ 17.087] WinBSegment: 0x0 [ 17.087] WinFuncPtr: 0xc0007631 [ 17.087] BytesPerScanline: 640 [ 17.087] XResolution: 320 [ 17.087] YResolution: 200 [ 17.087] XCharSize: 8 [ 17.087] YCharSize: 8 [ 17.087] NumberOfPlanes: 1 [ 17.087] BitsPerPixel: 16 [ 17.087] NumberOfBanks: 1 [ 17.087] MemoryModel: 6 [ 17.087] BankSize: 0 [ 17.087] NumberOfImages: 30 [ 17.087] RedMaskSize: 5 [ 17.087] RedFieldPosition: 11 [ 17.087] GreenMaskSize: 6 [ 17.087] GreenFieldPosition: 5 [ 17.087] BlueMaskSize: 5 [ 17.087] BlueFieldPosition: 0 [ 17.087] RsvdMaskSize: 0 [ 17.087] RsvdFieldPosition: 0 [ 17.087] DirectColorModeInfo: 0 [ 17.087] PhysBasePtr: 0xef000000 [ 17.087] LinBytesPerScanLine: 640 [ 17.087] BnkNumberOfImagePages: 30 [ 17.087] LinNumberOfImagePages: 30 [ 17.087] LinRedMaskSize: 5 [ 17.087] LinRedFieldPosition: 11 [ 17.087] LinGreenMaskSize: 6 [ 17.087] LinGreenFieldPosition: 5 [ 17.087] LinBlueMaskSize: 5 [ 17.087] LinBlueFieldPosition: 0 [ 17.087] LinRsvdMaskSize: 0 [ 17.087] LinRsvdFieldPosition: 0 [ 17.087] MaxPixelClock: 229500000 [ 17.088] *Mode: 10f (320x200) [ 17.088] ModeAttributes: 0x3bf [ 17.088] WinAAttributes: 0x7 [ 17.088] WinBAttributes: 0x0 [ 17.088] WinGranularity: 64 [ 17.088] WinSize: 64 [ 17.088] WinASegment: 0xa000 [ 17.088] WinBSegment: 0x0 [ 17.088] WinFuncPtr: 0xc0007631 [ 17.088] BytesPerScanline: 1280 [ 17.088] XResolution: 320 [ 17.088] YResolution: 200 [ 17.088] XCharSize: 8 [ 17.088] YCharSize: 8 [ 17.088] NumberOfPlanes: 1 [ 17.088] BitsPerPixel: 32 [ 17.088] NumberOfBanks: 1 [ 17.088] MemoryModel: 6 [ 17.088] BankSize: 0 [ 17.088] NumberOfImages: 14 [ 17.088] RedMaskSize: 8 [ 17.088] RedFieldPosition: 16 [ 17.088] GreenMaskSize: 8 [ 17.088] GreenFieldPosition: 8 [ 17.088] BlueMaskSize: 8 [ 17.088] BlueFieldPosition: 0 [ 17.088] RsvdMaskSize: 8 [ 17.088] RsvdFieldPosition: 24 [ 17.088] DirectColorModeInfo: 0 [ 17.088] PhysBasePtr: 0xef000000 [ 17.088] LinBytesPerScanLine: 1280 [ 17.088] BnkNumberOfImagePages: 14 [ 17.088] LinNumberOfImagePages: 14 [ 17.088] LinRedMaskSize: 8 [ 17.088] LinRedFieldPosition: 16 [ 17.088] LinGreenMaskSize: 8 [ 17.088] LinGreenFieldPosition: 8 [ 17.088] LinBlueMaskSize: 8 [ 17.088] LinBlueFieldPosition: 0 [ 17.088] LinRsvdMaskSize: 8 [ 17.088] LinRsvdFieldPosition: 24 [ 17.088] MaxPixelClock: 229500000 [ 17.089] Mode: 111 (640x480) [ 17.089] ModeAttributes: 0x3bf [ 17.089] WinAAttributes: 0x7 [ 17.089] WinBAttributes: 0x0 [ 17.089] WinGranularity: 64 [ 17.089] WinSize: 64 [ 17.089] WinASegment: 0xa000 [ 17.089] WinBSegment: 0x0 [ 17.089] WinFuncPtr: 0xc0007631 [ 17.089] BytesPerScanline: 1280 [ 17.089] XResolution: 640 [ 17.089] YResolution: 480 [ 17.089] XCharSize: 8 [ 17.089] YCharSize: 16 [ 17.089] NumberOfPlanes: 1 [ 17.089] BitsPerPixel: 16 [ 17.089] NumberOfBanks: 1 [ 17.089] MemoryModel: 6 [ 17.089] BankSize: 0 [ 17.089] NumberOfImages: 4 [ 17.089] RedMaskSize: 5 [ 17.089] RedFieldPosition: 11 [ 17.089] GreenMaskSize: 6 [ 17.089] GreenFieldPosition: 5 [ 17.089] BlueMaskSize: 5 [ 17.089] BlueFieldPosition: 0 [ 17.089] RsvdMaskSize: 0 [ 17.089] RsvdFieldPosition: 0 [ 17.089] DirectColorModeInfo: 0 [ 17.089] PhysBasePtr: 0xef000000 [ 17.089] LinBytesPerScanLine: 1280 [ 17.089] BnkNumberOfImagePages: 4 [ 17.089] LinNumberOfImagePages: 4 [ 17.089] LinRedMaskSize: 5 [ 17.089] LinRedFieldPosition: 11 [ 17.089] LinGreenMaskSize: 6 [ 17.089] LinGreenFieldPosition: 5 [ 17.089] LinBlueMaskSize: 5 [ 17.089] LinBlueFieldPosition: 0 [ 17.089] LinRsvdMaskSize: 0 [ 17.089] LinRsvdFieldPosition: 0 [ 17.089] MaxPixelClock: 229500000 [ 17.091] *Mode: 112 (640x480) [ 17.091] ModeAttributes: 0x3bf [ 17.091] WinAAttributes: 0x7 [ 17.091] WinBAttributes: 0x0 [ 17.091] WinGranularity: 64 [ 17.091] WinSize: 64 [ 17.091] WinASegment: 0xa000 [ 17.091] WinBSegment: 0x0 [ 17.091] WinFuncPtr: 0xc0007631 [ 17.091] BytesPerScanline: 2560 [ 17.091] XResolution: 640 [ 17.091] YResolution: 480 [ 17.091] XCharSize: 8 [ 17.091] YCharSize: 16 [ 17.091] NumberOfPlanes: 1 [ 17.091] BitsPerPixel: 32 [ 17.091] NumberOfBanks: 1 [ 17.091] MemoryModel: 6 [ 17.091] BankSize: 0 [ 17.091] NumberOfImages: 1 [ 17.091] RedMaskSize: 8 [ 17.091] RedFieldPosition: 16 [ 17.091] GreenMaskSize: 8 [ 17.091] GreenFieldPosition: 8 [ 17.091] BlueMaskSize: 8 [ 17.091] BlueFieldPosition: 0 [ 17.091] RsvdMaskSize: 8 [ 17.091] RsvdFieldPosition: 24 [ 17.091] DirectColorModeInfo: 0 [ 17.091] PhysBasePtr: 0xef000000 [ 17.091] LinBytesPerScanLine: 2560 [ 17.091] BnkNumberOfImagePages: 1 [ 17.091] LinNumberOfImagePages: 1 [ 17.091] LinRedMaskSize: 8 [ 17.091] LinRedFieldPosition: 16 [ 17.091] LinGreenMaskSize: 8 [ 17.091] LinGreenFieldPosition: 8 [ 17.091] LinBlueMaskSize: 8 [ 17.091] LinBlueFieldPosition: 0 [ 17.091] LinRsvdMaskSize: 8 [ 17.091] LinRsvdFieldPosition: 24 [ 17.091] MaxPixelClock: 229500000 [ 17.092] Mode: 114 (800x600) [ 17.092] ModeAttributes: 0x3bf [ 17.092] WinAAttributes: 0x7 [ 17.092] WinBAttributes: 0x0 [ 17.092] WinGranularity: 64 [ 17.092] WinSize: 64 [ 17.092] WinASegment: 0xa000 [ 17.092] WinBSegment: 0x0 [ 17.092] WinFuncPtr: 0xc0007631 [ 17.092] BytesPerScanline: 1600 [ 17.092] XResolution: 800 [ 17.092] YResolution: 600 [ 17.092] XCharSize: 8 [ 17.092] YCharSize: 16 [ 17.092] NumberOfPlanes: 1 [ 17.092] BitsPerPixel: 16 [ 17.092] NumberOfBanks: 1 [ 17.092] MemoryModel: 6 [ 17.092] BankSize: 0 [ 17.092] NumberOfImages: 2 [ 17.092] RedMaskSize: 5 [ 17.092] RedFieldPosition: 11 [ 17.092] GreenMaskSize: 6 [ 17.092] GreenFieldPosition: 5 [ 17.092] BlueMaskSize: 5 [ 17.092] BlueFieldPosition: 0 [ 17.092] RsvdMaskSize: 0 [ 17.092] RsvdFieldPosition: 0 [ 17.092] DirectColorModeInfo: 0 [ 17.092] PhysBasePtr: 0xef000000 [ 17.092] LinBytesPerScanLine: 1600 [ 17.092] BnkNumberOfImagePages: 2 [ 17.092] LinNumberOfImagePages: 2 [ 17.092] LinRedMaskSize: 5 [ 17.092] LinRedFieldPosition: 11 [ 17.092] LinGreenMaskSize: 6 [ 17.092] LinGreenFieldPosition: 5 [ 17.092] LinBlueMaskSize: 5 [ 17.092] LinBlueFieldPosition: 0 [ 17.092] LinRsvdMaskSize: 0 [ 17.092] LinRsvdFieldPosition: 0 [ 17.092] MaxPixelClock: 229500000 [ 17.093] *Mode: 115 (800x600) [ 17.093] ModeAttributes: 0x3bf [ 17.093] WinAAttributes: 0x7 [ 17.093] WinBAttributes: 0x0 [ 17.093] WinGranularity: 64 [ 17.093] WinSize: 64 [ 17.093] WinASegment: 0xa000 [ 17.093] WinBSegment: 0x0 [ 17.093] WinFuncPtr: 0xc0007631 [ 17.093] BytesPerScanline: 3200 [ 17.093] XResolution: 800 [ 17.094] YResolution: 600 [ 17.094] XCharSize: 8 [ 17.094] YCharSize: 16 [ 17.094] NumberOfPlanes: 1 [ 17.094] BitsPerPixel: 32 [ 17.094] NumberOfBanks: 1 [ 17.094] MemoryModel: 6 [ 17.094] BankSize: 0 [ 17.094] NumberOfImages: 1 [ 17.094] RedMaskSize: 8 [ 17.094] RedFieldPosition: 16 [ 17.094] GreenMaskSize: 8 [ 17.094] GreenFieldPosition: 8 [ 17.094] BlueMaskSize: 8 [ 17.094] BlueFieldPosition: 0 [ 17.094] RsvdMaskSize: 8 [ 17.094] RsvdFieldPosition: 24 [ 17.094] DirectColorModeInfo: 0 [ 17.094] PhysBasePtr: 0xef000000 [ 17.094] LinBytesPerScanLine: 3200 [ 17.094] BnkNumberOfImagePages: 1 [ 17.094] LinNumberOfImagePages: 1 [ 17.094] LinRedMaskSize: 8 [ 17.094] LinRedFieldPosition: 16 [ 17.094] LinGreenMaskSize: 8 [ 17.094] LinGreenFieldPosition: 8 [ 17.094] LinBlueMaskSize: 8 [ 17.094] LinBlueFieldPosition: 0 [ 17.094] LinRsvdMaskSize: 8 [ 17.094] LinRsvdFieldPosition: 24 [ 17.094] MaxPixelClock: 229500000 [ 17.095] Mode: 117 (1024x768) [ 17.095] ModeAttributes: 0x3bf [ 17.095] WinAAttributes: 0x7 [ 17.095] WinBAttributes: 0x0 [ 17.095] WinGranularity: 64 [ 17.095] WinSize: 64 [ 17.095] WinASegment: 0xa000 [ 17.095] WinBSegment: 0x0 [ 17.095] WinFuncPtr: 0xc0007631 [ 17.095] BytesPerScanline: 2048 [ 17.095] XResolution: 1024 [ 17.095] YResolution: 768 [ 17.095] XCharSize: 8 [ 17.095] YCharSize: 16 [ 17.095] NumberOfPlanes: 1 [ 17.095] BitsPerPixel: 16 [ 17.095] NumberOfBanks: 1 [ 17.095] MemoryModel: 6 [ 17.095] BankSize: 0 [ 17.095] NumberOfImages: 1 [ 17.095] RedMaskSize: 5 [ 17.095] RedFieldPosition: 11 [ 17.095] GreenMaskSize: 6 [ 17.095] GreenFieldPosition: 5 [ 17.095] BlueMaskSize: 5 [ 17.095] BlueFieldPosition: 0 [ 17.095] RsvdMaskSize: 0 [ 17.095] RsvdFieldPosition: 0 [ 17.095] DirectColorModeInfo: 0 [ 17.095] PhysBasePtr: 0xef000000 [ 17.095] LinBytesPerScanLine: 2048 [ 17.095] BnkNumberOfImagePages: 1 [ 17.095] LinNumberOfImagePages: 1 [ 17.095] LinRedMaskSize: 5 [ 17.095] LinRedFieldPosition: 11 [ 17.095] LinGreenMaskSize: 6 [ 17.095] LinGreenFieldPosition: 5 [ 17.095] LinBlueMaskSize: 5 [ 17.095] LinBlueFieldPosition: 0 [ 17.095] LinRsvdMaskSize: 0 [ 17.095] LinRsvdFieldPosition: 0 [ 17.095] MaxPixelClock: 229500000 [ 17.096] *Mode: 118 (1024x768) [ 17.096] ModeAttributes: 0x3bf [ 17.096] WinAAttributes: 0x7 [ 17.096] WinBAttributes: 0x0 [ 17.096] WinGranularity: 64 [ 17.096] WinSize: 64 [ 17.096] WinASegment: 0xa000 [ 17.096] WinBSegment: 0x0 [ 17.096] WinFuncPtr: 0xc0007631 [ 17.096] BytesPerScanline: 4096 [ 17.096] XResolution: 1024 [ 17.096] YResolution: 768 [ 17.096] XCharSize: 8 [ 17.096] YCharSize: 16 [ 17.096] NumberOfPlanes: 1 [ 17.096] BitsPerPixel: 32 [ 17.096] NumberOfBanks: 1 [ 17.096] MemoryModel: 6 [ 17.096] BankSize: 0 [ 17.096] NumberOfImages: 1 [ 17.096] RedMaskSize: 8 [ 17.096] RedFieldPosition: 16 [ 17.096] GreenMaskSize: 8 [ 17.096] GreenFieldPosition: 8 [ 17.096] BlueMaskSize: 8 [ 17.096] BlueFieldPosition: 0 [ 17.096] RsvdMaskSize: 8 [ 17.096] RsvdFieldPosition: 24 [ 17.096] DirectColorModeInfo: 0 [ 17.096] PhysBasePtr: 0xef000000 [ 17.096] LinBytesPerScanLine: 4096 [ 17.096] BnkNumberOfImagePages: 1 [ 17.096] LinNumberOfImagePages: 1 [ 17.096] LinRedMaskSize: 8 [ 17.096] LinRedFieldPosition: 16 [ 17.096] LinGreenMaskSize: 8 [ 17.096] LinGreenFieldPosition: 8 [ 17.096] LinBlueMaskSize: 8 [ 17.096] LinBlueFieldPosition: 0 [ 17.096] LinRsvdMaskSize: 8 [ 17.096] LinRsvdFieldPosition: 24 [ 17.096] MaxPixelClock: 229500000 [ 17.098] Mode: 130 (320x200) [ 17.098] ModeAttributes: 0x3bf [ 17.098] WinAAttributes: 0x7 [ 17.098] WinBAttributes: 0x0 [ 17.098] WinGranularity: 64 [ 17.098] WinSize: 64 [ 17.098] WinASegment: 0xa000 [ 17.098] WinBSegment: 0x0 [ 17.098] WinFuncPtr: 0xc0007631 [ 17.098] BytesPerScanline: 320 [ 17.098] XResolution: 320 [ 17.098] YResolution: 200 [ 17.098] XCharSize: 8 [ 17.098] YCharSize: 8 [ 17.098] NumberOfPlanes: 1 [ 17.098] BitsPerPixel: 8 [ 17.098] NumberOfBanks: 1 [ 17.098] MemoryModel: 4 [ 17.098] BankSize: 0 [ 17.098] NumberOfImages: 62 [ 17.098] RedMaskSize: 0 [ 17.098] RedFieldPosition: 0 [ 17.098] GreenMaskSize: 0 [ 17.098] GreenFieldPosition: 0 [ 17.098] BlueMaskSize: 0 [ 17.098] BlueFieldPosition: 0 [ 17.098] RsvdMaskSize: 0 [ 17.098] RsvdFieldPosition: 0 [ 17.098] DirectColorModeInfo: 0 [ 17.098] PhysBasePtr: 0xef000000 [ 17.098] LinBytesPerScanLine: 320 [ 17.098] BnkNumberOfImagePages: 62 [ 17.098] LinNumberOfImagePages: 62 [ 17.098] LinRedMaskSize: 0 [ 17.098] LinRedFieldPosition: 0 [ 17.098] LinGreenMaskSize: 0 [ 17.098] LinGreenFieldPosition: 0 [ 17.098] LinBlueMaskSize: 0 [ 17.098] LinBlueFieldPosition: 0 [ 17.098] LinRsvdMaskSize: 0 [ 17.098] LinRsvdFieldPosition: 0 [ 17.098] MaxPixelClock: 229500000 [ 17.099] Mode: 131 (320x400) [ 17.099] ModeAttributes: 0x3bf [ 17.099] WinAAttributes: 0x7 [ 17.099] WinBAttributes: 0x0 [ 17.099] WinGranularity: 64 [ 17.099] WinSize: 64 [ 17.099] WinASegment: 0xa000 [ 17.099] WinBSegment: 0x0 [ 17.099] WinFuncPtr: 0xc0007631 [ 17.099] BytesPerScanline: 320 [ 17.099] XResolution: 320 [ 17.099] YResolution: 400 [ 17.099] XCharSize: 8 [ 17.099] YCharSize: 16 [ 17.099] NumberOfPlanes: 1 [ 17.099] BitsPerPixel: 8 [ 17.099] NumberOfBanks: 1 [ 17.099] MemoryModel: 4 [ 17.099] BankSize: 0 [ 17.099] NumberOfImages: 30 [ 17.099] RedMaskSize: 0 [ 17.099] RedFieldPosition: 0 [ 17.099] GreenMaskSize: 0 [ 17.099] GreenFieldPosition: 0 [ 17.099] BlueMaskSize: 0 [ 17.099] BlueFieldPosition: 0 [ 17.099] RsvdMaskSize: 0 [ 17.099] RsvdFieldPosition: 0 [ 17.099] DirectColorModeInfo: 0 [ 17.099] PhysBasePtr: 0xef000000 [ 17.099] LinBytesPerScanLine: 320 [ 17.099] BnkNumberOfImagePages: 30 [ 17.099] LinNumberOfImagePages: 30 [ 17.099] LinRedMaskSize: 0 [ 17.099] LinRedFieldPosition: 0 [ 17.099] LinGreenMaskSize: 0 [ 17.099] LinGreenFieldPosition: 0 [ 17.099] LinBlueMaskSize: 0 [ 17.099] LinBlueFieldPosition: 0 [ 17.099] LinRsvdMaskSize: 0 [ 17.099] LinRsvdFieldPosition: 0 [ 17.099] MaxPixelClock: 229500000 [ 17.100] Mode: 132 (320x400) [ 17.100] ModeAttributes: 0x3bf [ 17.100] WinAAttributes: 0x7 [ 17.100] WinBAttributes: 0x0 [ 17.100] WinGranularity: 64 [ 17.100] WinSize: 64 [ 17.100] WinASegment: 0xa000 [ 17.100] WinBSegment: 0x0 [ 17.100] WinFuncPtr: 0xc0007631 [ 17.100] BytesPerScanline: 640 [ 17.100] XResolution: 320 [ 17.100] YResolution: 400 [ 17.100] XCharSize: 8 [ 17.100] YCharSize: 16 [ 17.100] NumberOfPlanes: 1 [ 17.100] BitsPerPixel: 16 [ 17.100] NumberOfBanks: 1 [ 17.100] MemoryModel: 6 [ 17.100] BankSize: 0 [ 17.100] NumberOfImages: 14 [ 17.100] RedMaskSize: 5 [ 17.100] RedFieldPosition: 11 [ 17.100] GreenMaskSize: 6 [ 17.100] GreenFieldPosition: 5 [ 17.100] BlueMaskSize: 5 [ 17.100] BlueFieldPosition: 0 [ 17.100] RsvdMaskSize: 0 [ 17.100] RsvdFieldPosition: 0 [ 17.100] DirectColorModeInfo: 0 [ 17.100] PhysBasePtr: 0xef000000 [ 17.100] LinBytesPerScanLine: 640 [ 17.100] BnkNumberOfImagePages: 14 [ 17.100] LinNumberOfImagePages: 14 [ 17.100] LinRedMaskSize: 5 [ 17.100] LinRedFieldPosition: 11 [ 17.100] LinGreenMaskSize: 6 [ 17.100] LinGreenFieldPosition: 5 [ 17.100] LinBlueMaskSize: 5 [ 17.100] LinBlueFieldPosition: 0 [ 17.101] LinRsvdMaskSize: 0 [ 17.101] LinRsvdFieldPosition: 0 [ 17.101] MaxPixelClock: 229500000 [ 17.102] *Mode: 133 (320x400) [ 17.102] ModeAttributes: 0x3bf [ 17.102] WinAAttributes: 0x7 [ 17.102] WinBAttributes: 0x0 [ 17.102] WinGranularity: 64 [ 17.102] WinSize: 64 [ 17.102] WinASegment: 0xa000 [ 17.102] WinBSegment: 0x0 [ 17.102] WinFuncPtr: 0xc0007631 [ 17.102] BytesPerScanline: 1280 [ 17.102] XResolution: 320 [ 17.102] YResolution: 400 [ 17.102] XCharSize: 8 [ 17.102] YCharSize: 16 [ 17.102] NumberOfPlanes: 1 [ 17.102] BitsPerPixel: 32 [ 17.102] NumberOfBanks: 1 [ 17.102] MemoryModel: 6 [ 17.102] BankSize: 0 [ 17.102] NumberOfImages: 6 [ 17.102] RedMaskSize: 8 [ 17.102] RedFieldPosition: 16 [ 17.102] GreenMaskSize: 8 [ 17.102] GreenFieldPosition: 8 [ 17.102] BlueMaskSize: 8 [ 17.102] BlueFieldPosition: 0 [ 17.102] RsvdMaskSize: 8 [ 17.102] RsvdFieldPosition: 24 [ 17.102] DirectColorModeInfo: 0 [ 17.102] PhysBasePtr: 0xef000000 [ 17.102] LinBytesPerScanLine: 1280 [ 17.102] BnkNumberOfImagePages: 6 [ 17.102] LinNumberOfImagePages: 6 [ 17.102] LinRedMaskSize: 8 [ 17.102] LinRedFieldPosition: 16 [ 17.102] LinGreenMaskSize: 8 [ 17.102] LinGreenFieldPosition: 8 [ 17.102] LinBlueMaskSize: 8 [ 17.102] LinBlueFieldPosition: 0 [ 17.102] LinRsvdMaskSize: 8 [ 17.102] LinRsvdFieldPosition: 24 [ 17.102] MaxPixelClock: 229500000 [ 17.103] Mode: 134 (320x240) [ 17.103] ModeAttributes: 0x3bf [ 17.103] WinAAttributes: 0x7 [ 17.103] WinBAttributes: 0x0 [ 17.103] WinGranularity: 64 [ 17.103] WinSize: 64 [ 17.103] WinASegment: 0xa000 [ 17.103] WinBSegment: 0x0 [ 17.103] WinFuncPtr: 0xc0007631 [ 17.103] BytesPerScanline: 320 [ 17.103] XResolution: 320 [ 17.103] YResolution: 240 [ 17.103] XCharSize: 8 [ 17.103] YCharSize: 8 [ 17.103] NumberOfPlanes: 1 [ 17.103] BitsPerPixel: 8 [ 17.103] NumberOfBanks: 1 [ 17.103] MemoryModel: 4 [ 17.103] BankSize: 0 [ 17.103] NumberOfImages: 30 [ 17.103] RedMaskSize: 0 [ 17.103] RedFieldPosition: 0 [ 17.103] GreenMaskSize: 0 [ 17.103] GreenFieldPosition: 0 [ 17.103] BlueMaskSize: 0 [ 17.103] BlueFieldPosition: 0 [ 17.103] RsvdMaskSize: 0 [ 17.103] RsvdFieldPosition: 0 [ 17.103] DirectColorModeInfo: 0 [ 17.103] PhysBasePtr: 0xef000000 [ 17.103] LinBytesPerScanLine: 320 [ 17.103] BnkNumberOfImagePages: 30 [ 17.103] LinNumberOfImagePages: 30 [ 17.103] LinRedMaskSize: 0 [ 17.103] LinRedFieldPosition: 0 [ 17.103] LinGreenMaskSize: 0 [ 17.103] LinGreenFieldPosition: 0 [ 17.103] LinBlueMaskSize: 0 [ 17.103] LinBlueFieldPosition: 0 [ 17.103] LinRsvdMaskSize: 0 [ 17.103] LinRsvdFieldPosition: 0 [ 17.103] MaxPixelClock: 229500000 [ 17.104] Mode: 135 (320x240) [ 17.104] ModeAttributes: 0x3bf [ 17.104] WinAAttributes: 0x7 [ 17.104] WinBAttributes: 0x0 [ 17.104] WinGranularity: 64 [ 17.104] WinSize: 64 [ 17.104] WinASegment: 0xa000 [ 17.105] WinBSegment: 0x0 [ 17.105] WinFuncPtr: 0xc0007631 [ 17.105] BytesPerScanline: 640 [ 17.105] XResolution: 320 [ 17.105] YResolution: 240 [ 17.105] XCharSize: 8 [ 17.105] YCharSize: 8 [ 17.105] NumberOfPlanes: 1 [ 17.105] BitsPerPixel: 16 [ 17.105] NumberOfBanks: 1 [ 17.105] MemoryModel: 6 [ 17.105] BankSize: 0 [ 17.105] NumberOfImages: 19 [ 17.105] RedMaskSize: 5 [ 17.105] RedFieldPosition: 11 [ 17.105] GreenMaskSize: 6 [ 17.105] GreenFieldPosition: 5 [ 17.105] BlueMaskSize: 5 [ 17.105] BlueFieldPosition: 0 [ 17.105] RsvdMaskSize: 0 [ 17.105] RsvdFieldPosition: 0 [ 17.105] DirectColorModeInfo: 0 [ 17.105] PhysBasePtr: 0xef000000 [ 17.105] LinBytesPerScanLine: 640 [ 17.105] BnkNumberOfImagePages: 19 [ 17.105] LinNumberOfImagePages: 19 [ 17.105] LinRedMaskSize: 5 [ 17.105] LinRedFieldPosition: 11 [ 17.105] LinGreenMaskSize: 6 [ 17.105] LinGreenFieldPosition: 5 [ 17.105] LinBlueMaskSize: 5 [ 17.105] LinBlueFieldPosition: 0 [ 17.105] LinRsvdMaskSize: 0 [ 17.105] LinRsvdFieldPosition: 0 [ 17.105] MaxPixelClock: 229500000 [ 17.106] *Mode: 136 (320x240) [ 17.106] ModeAttributes: 0x3bf [ 17.106] WinAAttributes: 0x7 [ 17.106] WinBAttributes: 0x0 [ 17.106] WinGranularity: 64 [ 17.106] WinSize: 64 [ 17.106] WinASegment: 0xa000 [ 17.106] WinBSegment: 0x0 [ 17.106] WinFuncPtr: 0xc0007631 [ 17.106] BytesPerScanline: 1280 [ 17.106] XResolution: 320 [ 17.106] YResolution: 240 [ 17.106] XCharSize: 8 [ 17.106] YCharSize: 8 [ 17.106] NumberOfPlanes: 1 [ 17.106] BitsPerPixel: 32 [ 17.106] NumberOfBanks: 1 [ 17.106] MemoryModel: 6 [ 17.106] BankSize: 0 [ 17.106] NumberOfImages: 10 [ 17.106] RedMaskSize: 8 [ 17.106] RedFieldPosition: 16 [ 17.106] GreenMaskSize: 8 [ 17.106] GreenFieldPosition: 8 [ 17.106] BlueMaskSize: 8 [ 17.106] BlueFieldPosition: 0 [ 17.106] RsvdMaskSize: 8 [ 17.106] RsvdFieldPosition: 24 [ 17.106] DirectColorModeInfo: 0 [ 17.106] PhysBasePtr: 0xef000000 [ 17.106] LinBytesPerScanLine: 1280 [ 17.106] BnkNumberOfImagePages: 10 [ 17.106] LinNumberOfImagePages: 10 [ 17.106] LinRedMaskSize: 8 [ 17.106] LinRedFieldPosition: 16 [ 17.106] LinGreenMaskSize: 8 [ 17.106] LinGreenFieldPosition: 8 [ 17.106] LinBlueMaskSize: 8 [ 17.106] LinBlueFieldPosition: 0 [ 17.106] LinRsvdMaskSize: 8 [ 17.106] LinRsvdFieldPosition: 24 [ 17.106] MaxPixelClock: 229500000 [ 17.107] Mode: 13d (640x400) [ 17.107] ModeAttributes: 0x3bf [ 17.107] WinAAttributes: 0x7 [ 17.107] WinBAttributes: 0x0 [ 17.107] WinGranularity: 64 [ 17.107] WinSize: 64 [ 17.107] WinASegment: 0xa000 [ 17.107] WinBSegment: 0x0 [ 17.107] WinFuncPtr: 0xc0007631 [ 17.107] BytesPerScanline: 1280 [ 17.107] XResolution: 640 [ 17.107] YResolution: 400 [ 17.107] XCharSize: 8 [ 17.107] YCharSize: 16 [ 17.107] NumberOfPlanes: 1 [ 17.107] BitsPerPixel: 16 [ 17.107] NumberOfBanks: 1 [ 17.107] MemoryModel: 6 [ 17.107] BankSize: 0 [ 17.107] NumberOfImages: 6 [ 17.107] RedMaskSize: 5 [ 17.107] RedFieldPosition: 11 [ 17.107] GreenMaskSize: 6 [ 17.107] GreenFieldPosition: 5 [ 17.107] BlueMaskSize: 5 [ 17.107] BlueFieldPosition: 0 [ 17.107] RsvdMaskSize: 0 [ 17.107] RsvdFieldPosition: 0 [ 17.107] DirectColorModeInfo: 0 [ 17.107] PhysBasePtr: 0xef000000 [ 17.107] LinBytesPerScanLine: 1280 [ 17.107] BnkNumberOfImagePages: 6 [ 17.107] LinNumberOfImagePages: 6 [ 17.107] LinRedMaskSize: 5 [ 17.107] LinRedFieldPosition: 11 [ 17.107] LinGreenMaskSize: 6 [ 17.107] LinGreenFieldPosition: 5 [ 17.107] LinBlueMaskSize: 5 [ 17.107] LinBlueFieldPosition: 0 [ 17.107] LinRsvdMaskSize: 0 [ 17.107] LinRsvdFieldPosition: 0 [ 17.107] MaxPixelClock: 229500000 [ 17.109] *Mode: 13e (640x400) [ 17.109] ModeAttributes: 0x3bf [ 17.109] WinAAttributes: 0x7 [ 17.109] WinBAttributes: 0x0 [ 17.109] WinGranularity: 64 [ 17.109] WinSize: 64 [ 17.109] WinASegment: 0xa000 [ 17.109] WinBSegment: 0x0 [ 17.109] WinFuncPtr: 0xc0007631 [ 17.109] BytesPerScanline: 2560 [ 17.109] XResolution: 640 [ 17.109] YResolution: 400 [ 17.109] XCharSize: 8 [ 17.109] YCharSize: 16 [ 17.109] NumberOfPlanes: 1 [ 17.109] BitsPerPixel: 32 [ 17.109] NumberOfBanks: 1 [ 17.109] MemoryModel: 6 [ 17.109] BankSize: 0 [ 17.109] NumberOfImages: 2 [ 17.109] RedMaskSize: 8 [ 17.109] RedFieldPosition: 16 [ 17.109] GreenMaskSize: 8 [ 17.109] GreenFieldPosition: 8 [ 17.109] BlueMaskSize: 8 [ 17.109] BlueFieldPosition: 0 [ 17.109] RsvdMaskSize: 8 [ 17.109] RsvdFieldPosition: 24 [ 17.109] DirectColorModeInfo: 0 [ 17.109] PhysBasePtr: 0xef000000 [ 17.109] LinBytesPerScanLine: 2560 [ 17.109] BnkNumberOfImagePages: 2 [ 17.109] LinNumberOfImagePages: 2 [ 17.109] LinRedMaskSize: 8 [ 17.109] LinRedFieldPosition: 16 [ 17.109] LinGreenMaskSize: 8 [ 17.109] LinGreenFieldPosition: 8 [ 17.109] LinBlueMaskSize: 8 [ 17.109] LinBlueFieldPosition: 0 [ 17.109] LinRsvdMaskSize: 8 [ 17.109] LinRsvdFieldPosition: 24 [ 17.109] MaxPixelClock: 229500000 [ 17.109] [ 17.109] (II) VESA(0): Total Memory: 224 64KB banks (14336kB) [ 17.109] (II) VESA(0): Monitor0: Using hsync range of 28.00-33.00 kHz [ 17.109] (II) VESA(0): Monitor0: Using vrefresh range of 43.00-72.00 Hz [ 17.109] (WW) VESA(0): Unable to estimate virtual size [ 17.109] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name) [ 17.109] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name) [ 17.109] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name) [ 17.109] (II) VESA(0): Not using built-in mode "640x400" (no mode of this name) [ 17.109] (II) VESA(0): Not using built-in mode "320x400" (no mode of this name) [ 17.109] (II) VESA(0): Not using built-in mode "320x240" (no mode of this name) [ 17.109] (II) VESA(0): Not using built-in mode "320x200" (no mode of this name) [ 17.109] (WW) VESA(0): No valid modes left. Trying less strict filter... [ 17.109] (II) VESA(0): Monitor0: Using hsync range of 28.00-33.00 kHz [ 17.109] (II) VESA(0): Monitor0: Using vrefresh range of 43.00-72.00 Hz [ 17.109] (WW) VESA(0): Unable to estimate virtual size [ 17.109] (II) VESA(0): Not using built-in mode "1024x768" (hsync out of range) [ 17.109] (II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings) [ 17.109] (II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings) [ 17.109] (--) VESA(0): Virtual size is 800x600 (pitch 800) [ 17.109] (**) VESA(0): *Built-in mode "800x600" [ 17.109] (**) VESA(0): *Built-in mode "640x480" [ 17.109] (**) VESA(0): *Built-in mode "640x400" [ 17.109] (**) VESA(0): *Built-in mode "320x400" [ 17.109] (==) VESA(0): DPI set to (96, 96) [ 17.109] (II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112) [ 17.110] (**) VESA(0): Using "Shadow Framebuffer" [ 17.110] (II) Loading sub module "shadow" [ 17.110] (II) LoadModule: "shadow" [ 17.110] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 17.140] (II) Module shadow: vendor="X.Org Foundation" [ 17.141] compiled for 1.9.5, module version = 1.1.0 [ 17.141] ABI class: X.Org ANSI C Emulation, version 0.4 [ 17.141] (II) Loading sub module "fb" [ 17.141] (II) LoadModule: "fb" [ 17.141] (II) Loading /usr/lib/xorg/modules/libfb.so [ 17.143] (II) Module fb: vendor="X.Org Foundation" [ 17.143] compiled for 1.9.5, module version = 1.0.0 [ 17.143] ABI class: X.Org ANSI C Emulation, version 0.4 [ 17.143] (==) Depth 24 pixmap format is 32 bpp [ 17.143] (II) Loading sub module "int10" [ 17.143] (II) LoadModule: "int10" [ 17.143] (II) Reloading /usr/lib/xorg/modules/libint10.so [ 17.143] (II) VESA(0): initializing int10 [ 17.144] (II) VESA(0): Bad V_BIOS checksum [ 17.144] (II) VESA(0): Primary V_BIOS segment is: 0xc000 [ 17.186] (II) VESA(0): VESA BIOS detected [ 17.186] (II) VESA(0): VESA VBE Version 3.0 [ 17.186] (II) VESA(0): VESA VBE Total Mem: 14336 kB [ 17.186] (II) VESA(0): VESA VBE OEM: NVIDIA [ 17.186] (II) VESA(0): VESA VBE OEM Software Rev: 112.21 [ 17.186] (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation [ 17.186] (II) VESA(0): VESA VBE OEM Product: GT215 Board - 06720001 [ 17.186] (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev [ 17.187] (II) VESA(0): virtual address = 0x7f3c9112e000, physical address = 0xef000000, size = 14680064 [ 17.218] (II) VESA(0): Setting up VESA Mode 0x115 (800x600) [ 17.333] (==) VESA(0): Default visual is TrueColor [ 17.347] (==) VESA(0): Backing store disabled [ 17.347] (**) VESA(0): DPMS enabled [ 17.348] (==) RandR enabled [ 17.348] (II) Initializing built-in extension Generic Event Extension [ 17.348] (II) Initializing built-in extension SHAPE [ 17.348] (II) Initializing built-in extension MIT-SHM [ 17.348] (II) Initializing built-in extension XInputExtension [ 17.348] (II) Initializing built-in extension XTEST [ 17.348] (II) Initializing built-in extension BIG-REQUESTS [ 17.348] (II) Initializing built-in extension SYNC [ 17.348] (II) Initializing built-in extension XKEYBOARD [ 17.348] (II) Initializing built-in extension XC-MISC [ 17.348] (II) Initializing built-in extension SECURITY [ 17.348] (II) Initializing built-in extension XINERAMA [ 17.348] (II) Initializing built-in extension XFIXES [ 17.348] (II) Initializing built-in extension RENDER [ 17.348] (II) Initializing built-in extension RANDR [ 17.348] (II) Initializing built-in extension COMPOSITE [ 17.348] (II) Initializing built-in extension DAMAGE [ 17.349] (II) SELinux: Disabled on system [ 17.357] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 30.920] (II) config/udev: Adding input device HP HP Wireless Comfort Desktop (/dev/input/event1) [ 30.920] (**) HP HP Wireless Comfort Desktop: Applying InputClass "evdev keyboard catchall" [ 30.920] (II) LoadModule: "evdev" [ 30.921] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.953] (II) Module evdev: vendor="X.Org Foundation" [ 30.953] compiled for 1.9.4, module version = 2.6.0 [ 30.953] Module class: X.Org XInput Driver [ 30.953] ABI class: X.Org XInput driver, version 11.0 [ 30.953] (**) HP HP Wireless Comfort Desktop: always reports core events [ 30.953] (**) HP HP Wireless Comfort Desktop: Device: "/dev/input/event1" [ 30.964] (--) HP HP Wireless Comfort Desktop: Found keys [ 30.964] (II) HP HP Wireless Comfort Desktop: Configuring as keyboard [ 30.964] (II) XINPUT: Adding extended input device "HP HP Wireless Comfort Desktop" (type: KEYBOARD) [ 30.964] (**) Option "xkb_rules" "evdev" [ 30.964] (**) Option "xkb_model" "pc105" [ 30.965] (**) Option "xkb_layout" "us" [ 30.965] (II) config/udev: Adding input device HP HP Wireless Comfort Desktop (/dev/input/mouse1) [ 30.965] (II) No input driver/identifier specified (ignoring) [ 30.966] (II) config/udev: Adding input device HP HP Wireless Comfort Desktop (/dev/input/event2) [ 30.966] (**) HP HP Wireless Comfort Desktop: Applying InputClass "evdev pointer catchall" [ 30.966] (**) HP HP Wireless Comfort Desktop: Applying InputClass "evdev keyboard catchall" [ 30.966] (**) HP HP Wireless Comfort Desktop: always reports core events [ 30.966] (**) HP HP Wireless Comfort Desktop: Device: "/dev/input/event2" [ 30.988] (--) HP HP Wireless Comfort Desktop: Found 10 mouse buttons [ 30.988] (--) HP HP Wireless Comfort Desktop: Found scroll wheel(s) [ 30.988] (--) HP HP Wireless Comfort Desktop: Found relative axes [ 30.988] (--) HP HP Wireless Comfort Desktop: Found x and y relative axes [ 30.988] (--) HP HP Wireless Comfort Desktop: Found absolute axes [ 30.988] (--) HP HP Wireless Comfort Desktop: Found keys [ 30.988] (II) HP HP Wireless Comfort Desktop: Configuring as mouse [ 30.989] (II) HP HP Wireless Comfort Desktop: Configuring as keyboard [ 30.989] (II) HP HP Wireless Comfort Desktop: Adding scrollwheel support [ 30.989] (**) HP HP Wireless Comfort Desktop: YAxisMapping: buttons 4 and 5 [ 30.989] (**) HP HP Wireless Comfort Desktop: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 30.989] (II) XINPUT: Adding extended input device "HP HP Wireless Comfort Desktop" (type: KEYBOARD) [ 30.989] (**) Option "xkb_rules" "evdev" [ 30.989] (**) Option "xkb_model" "pc105" [ 30.989] (**) Option "xkb_layout" "us" [ 30.989] (**) HP HP Wireless Comfort Desktop: (accel) keeping acceleration scheme 1 [ 30.989] (**) HP HP Wireless Comfort Desktop: (accel) acceleration profile 0 [ 30.989] (**) HP HP Wireless Comfort Desktop: (accel) acceleration factor: 2.000 [ 30.989] (**) HP HP Wireless Comfort Desktop: (accel) acceleration threshold: 4 [ 30.989] (II) HP HP Wireless Comfort Desktop: initialized for relative axes. [ 30.989] (WW) HP HP Wireless Comfort Desktop: ignoring absolute axes.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfbe0000 (usable) [ 0.000000] BIOS-e820: 00000000cfbe0000 - 00000000cfbe2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfbe2000 - 00000000cfbf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfbf0000 - 00000000cfc00000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 130000000 mask FF0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfbe0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfbe0000 [ 0.000000] 0000000000 - 00cfa00000 page 2M [ 0.000000] 00cfa00000 - 00cfbe0000 page 4k [ 0.000000] kernel direct mapping tables up to cfbe0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 [ 0.000000] RAMDISK: 36c78000 - 37633c43 [ 0.000000] ACPI: RSDP 00000000000f6f60 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfbe2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfbe20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfbe2180 04B37 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfbe0000 00040 [ 0.000000] ACPI: HPET 00000000cfbe6e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfbe6e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000cfbe6ec0 00000 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000cfbe7390 00A32 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000cfbe6d00 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cfbe7dd0 0369C (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000014fff] [ 0.000000] bootmap [0000000000015000 - 000000000003afff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454] [ 0.000000] #3 [0036c78000 - 0037633c43] RAMDISK ==> [0036c78000 - 0037633c43] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [000168b000 - 000168b0f6] BRK ==> [000168b000 - 000168b0f6] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f55b0] f55b0 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfbe0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1047423 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3839 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 832536 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfbe0000 - 00000000cfbe2000 [ 0.000000] PM: Registered nosave memory: 00000000cfbe2000 - 00000000cfbf0000 [ 0.000000] PM: Registered nosave memory: 00000000cfbf0000 - 00000000cfc00000 [ 0.000000] PM: Registered nosave memory: 00000000cfc00000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfc00000 (gap: cfc00000:24400000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u262144 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030295 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff8800055de000 - ffff8800095de000 [ 0.000000] software IO TLB at phys 0x55de000 - 0x95de000 [ 0.000000] Memory: 4046276k/4980736k available (3080k kernel code, 791044k absent, 143416k reserved, 1891k data, 592k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:472 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2797.787 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.57 BogoMIPS (lpj=11191148) [ 0.000013] Security Framework initialized [ 0.000016] SELinux: Disabled at boot. [ 0.000229] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000891] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001168] Mount-cache hash table entries: 256 [ 0.001246] Initializing cgroup subsys ns [ 0.001248] Initializing cgroup subsys cpuacct [ 0.001251] Initializing cgroup subsys devices [ 0.001253] Initializing cgroup subsys freezer [ 0.001254] Initializing cgroup subsys net_cls [ 0.001267] CPU: Physical Processor ID: 0 [ 0.001268] CPU: Processor Core ID: 0 [ 0.001271] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001272] CPU: L2 cache: 256K [ 0.001273] CPU: L3 cache: 8192K [ 0.001275] CPU 0/0x0 -> Node 0 [ 0.001277] mce: CPU supports 9 MCE banks [ 0.001285] CPU0: Thermal monitoring enabled (TM1) [ 0.001287] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.001292] using mwait in idle threads. [ 0.001294] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.001297] ... version: 3 [ 0.001298] ... bit width: 48 [ 0.001299] ... generic registers: 4 [ 0.001300] ... value mask: 0000ffffffffffff [ 0.001301] ... max period: 000000007fffffff [ 0.001302] ... fixed-purpose events: 3 [ 0.001303] ... event mask: 000000070000000f [ 0.001924] ACPI: Core revision 20090903 [ 0.008742] Setting APIC routing to flat [ 0.009068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.048751] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.156683] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.167113] Initializing CPU#1 [ 0.244616] CPU: Physical Processor ID: 0 [ 0.244617] CPU: Processor Core ID: 1 [ 0.244618] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.244620] CPU: L2 cache: 256K [ 0.244620] CPU: L3 cache: 8192K [ 0.244622] CPU 1/0x2 -> Node 0 [ 0.244631] CPU1: Thermal monitoring enabled (TM1) [ 0.244633] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.244711] CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.244717] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.264780] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.275032] Initializing CPU#2 [ 0.352618] CPU: Physical Processor ID: 0 [ 0.352619] CPU: Processor Core ID: 2 [ 0.352621] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.352622] CPU: L2 cache: 256K [ 0.352623] CPU: L3 cache: 8192K [ 0.352625] CPU 2/0x4 -> Node 0 [ 0.352633] CPU2: Thermal monitoring enabled (TM1) [ 0.352635] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.352650] CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.352655] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.372715] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.382967] Initializing CPU#3 [ 0.460620] CPU: Physical Processor ID: 0 [ 0.460621] CPU: Processor Core ID: 3 [ 0.460623] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.460624] CPU: L2 cache: 256K [ 0.460625] CPU: L3 cache: 8192K [ 0.460627] CPU 3/0x6 -> Node 0 [ 0.460635] CPU3: Thermal monitoring enabled (TM1) [ 0.460637] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.460742] CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.460748] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.480807] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.491059] Initializing CPU#4 [ 0.568623] CPU: Physical Processor ID: 0 [ 0.568624] CPU: Processor Core ID: 0 [ 0.568626] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.568627] CPU: L2 cache: 256K [ 0.568628] CPU: L3 cache: 8192K [ 0.568630] CPU 4/0x1 -> Node 0 [ 0.568639] CPU4: Thermal monitoring enabled (TM1) [ 0.568642] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.568742] CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.568748] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.588811] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.599062] Initializing CPU#5 [ 0.676625] CPU: Physical Processor ID: 0 [ 0.676625] CPU: Processor Core ID: 1 [ 0.676627] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.676628] CPU: L2 cache: 256K [ 0.676629] CPU: L3 cache: 8192K [ 0.676631] CPU 5/0x3 -> Node 0 [ 0.676639] CPU5: Thermal monitoring enabled (TM1) [ 0.676641] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.676646] CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.676651] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.696710] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.706645] Initializing CPU#6 [ 0.784627] CPU: Physical Processor ID: 0 [ 0.784628] CPU: Processor Core ID: 2 [ 0.784629] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.784631] CPU: L2 cache: 256K [ 0.784631] CPU: L3 cache: 8192K [ 0.784633] CPU 6/0x5 -> Node 0 [ 0.784641] CPU6: Thermal monitoring enabled (TM1) [ 0.784643] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.784718] CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.784724] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.804787] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.815039] Initializing CPU#7 [ 0.892629] CPU: Physical Processor ID: 0 [ 0.892630] CPU: Processor Core ID: 3 [ 0.892632] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.892633] CPU: L2 cache: 256K [ 0.892634] CPU: L3 cache: 8192K [ 0.892635] CPU 7/0x7 -> Node 0 [ 0.892644] CPU7: Thermal monitoring enabled (TM1) [ 0.892646] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.892715] CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.892721] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.912738] Brought up 8 CPUs [ 0.912740] Total of 8 processors activated (44766.08 BogoMIPS). [ 0.915589] CPU0 attaching sched-domain: [ 0.915592] domain 0: span 0,4 level SIBLING [ 0.915593] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) [ 0.915597] domain 1: span 0-7 level MC [ 0.915598] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) [ 0.915605] CPU1 attaching sched-domain: [ 0.915606] domain 0: span 1,5 level SIBLING [ 0.915607] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) [ 0.915611] domain 1: span 0-7 level MC [ 0.915612] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) [ 0.915617] CPU2 attaching sched-domain: [ 0.915618] domain 0: span 2,6 level SIBLING [ 0.915620] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) [ 0.915623] domain 1: span 0-7 level MC [ 0.915624] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) [ 0.915630] CPU3 attaching sched-domain: [ 0.915631] domain 0: span 3,7 level SIBLING [ 0.915632] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) [ 0.915635] domain 1: span 0-7 level MC [ 0.915636] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) [ 0.915642] CPU4 attaching sched-domain: [ 0.915643] domain 0: span 0,4 level SIBLING [ 0.915644] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) [ 0.915647] domain 1: span 0-7 level MC [ 0.915648] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) [ 0.915654] CPU5 attaching sched-domain: [ 0.915655] domain 0: span 1,5 level SIBLING [ 0.915656] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) [ 0.915659] domain 1: span 0-7 level MC [ 0.915661] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) [ 0.915666] CPU6 attaching sched-domain: [ 0.915667] domain 0: span 2,6 level SIBLING [ 0.915668] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) [ 0.915671] domain 1: span 0-7 level MC [ 0.915673] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) [ 0.915678] CPU7 attaching sched-domain: [ 0.915679] domain 0: span 3,7 level SIBLING [ 0.915681] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) [ 0.915684] domain 1: span 0-7 level MC [ 0.915685] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) [ 0.915971] devtmpfs: initialized [ 0.918974] regulator: core version 0.5 [ 0.919006] NET: Registered protocol family 16 [ 0.919064] ACPI: bus type pci registered [ 0.919109] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 [ 0.919111] PCI: MCFG area at f4000000 reserved in E820 [ 0.920246] PCI: Using MMCONFIG at f4000000 - f7ffffff [ 0.920247] PCI: Using configuration type 1 for base access [ 0.920590] bio: create slab <bio-0> at 0 [ 0.921035] ACPI: EC: Look up EC in DSDT [ 0.924874] ACPI: Interpreter enabled [ 0.924876] ACPI: (supports S0 S3 S4 S5) [ 0.924890] ACPI: Using IOAPIC for interrupt routing [ 0.928092] ACPI: No dock devices found. [ 0.928160] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.928252] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.928255] pci 0000:00:03.0: PME# disabled [ 0.928483] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f] [ 0.928541] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.928599] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.928664] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbfff000-0xfbfff3ff] [ 0.928711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.928714] pci 0000:00:1a.7: PME# disabled [ 0.928748] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff] [ 0.928783] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.928786] pci 0000:00:1b.0: PME# disabled [ 0.928838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.928841] pci 0000:00:1c.0: PME# disabled [ 0.928896] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.928899] pci 0000:00:1c.4: PME# disabled [ 0.928952] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.928955] pci 0000:00:1c.5: PME# disabled [ 0.929001] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f] [ 0.929059] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f] [ 0.929117] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f] [ 0.929175] pci 0000:00:1d.3: reg 20 io port: [0xf900-0xf91f] [ 0.929236] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbffe000-0xfbffe3ff] [ 0.929283] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.929286] pci 0000:00:1d.7: PME# disabled [ 0.929434] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807] [ 0.929439] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703] [ 0.929443] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607] [ 0.929447] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503] [ 0.929452] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf40f] [ 0.929456] pci 0000:00:1f.2: reg 24 io port: [0xf300-0xf30f] [ 0.929495] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbffd000-0xfbffd0ff] [ 0.929506] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.929542] pci 0000:00:1f.5: reg 10 io port: [0xf100-0xf107] [ 0.929546] pci 0000:00:1f.5: reg 14 io port: [0xf000-0xf003] [ 0.929551] pci 0000:00:1f.5: reg 18 io port: [0xef00-0xef07] [ 0.929555] pci 0000:00:1f.5: reg 1c io port: [0xee00-0xee03] [ 0.929559] pci 0000:00:1f.5: reg 20 io port: [0xed00-0xed0f] [ 0.929564] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] [ 0.929611] pci 0000:01:00.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff] [ 0.929618] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.929625] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xee000000-0xefffffff] [ 0.929629] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f] [ 0.929633] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.929679] pci 0000:01:00.1: reg 10 32bit mmio: [0xfaffc000-0xfaffffff] [ 0.936677] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] [ 0.936680] pci 0000:00:03.0: bridge 32bit mmio: [0xf9000000-0xfaffffff] [ 0.936683] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff] [ 0.936800] pci 0000:03:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff] [ 0.936836] pci 0000:03:00.0: PME# supported from D3hot [ 0.936840] pci 0000:03:00.0: PME# disabled [ 0.936889] pci 0000:03:00.1: reg 10 io port: [0xbf00-0xbf07] [ 0.936897] pci 0000:03:00.1: reg 14 io port: [0xbe00-0xbe03] [ 0.936905] pci 0000:03:00.1: reg 18 io port: [0xbd00-0xbd07] [ 0.936912] pci 0000:03:00.1: reg 1c io port: [0xbc00-0xbc03] [ 0.936920] pci 0000:03:00.1: reg 20 io port: [0xbb00-0xbb0f] [ 0.936983] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.937045] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] [ 0.937047] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.937091] pci 0000:04:00.0: reg 10 io port: [0xde00-0xdeff] [ 0.937109] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xfbeff000-0xfbefffff] [ 0.937121] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfbef8000-0xfbefbfff] [ 0.937128] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.937163] pci 0000:04:00.0: supports D1 D2 [ 0.937164] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.937168] pci 0000:04:00.0: PME# disabled [ 0.944694] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.944697] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] [ 0.944701] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfbe00000-0xfbefffff] [ 0.944739] pci 0000:05:07.0: reg 10 32bit mmio: [0xfbcff000-0xfbcff7ff] [ 0.944744] pci 0000:05:07.0: reg 14 32bit mmio: [0xfbcf8000-0xfbcfbfff] [ 0.944783] pci 0000:05:07.0: supports D1 D2 [ 0.944784] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot [ 0.944788] pci 0000:05:07.0: PME# disabled [ 0.944823] pci 0000:00:1e.0: transparent bridge [ 0.944828] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 0.944850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.945014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.945058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.945103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.945146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.963161] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.963231] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.963299] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.963367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.963435] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.963503] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.963571] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.963639] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.963703] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.963706] vgaarb: loaded [ 0.963744] PCI: Using ACPI for IRQ routing [ 0.963878] alloc irq_desc for 24 on node -1 [ 0.963880] alloc kstat_irqs on node -1 [ 0.963885] alloc irq_desc for 25 on node -1 [ 0.963886] alloc kstat_irqs on node -1 [ 0.963889] alloc irq_desc for 26 on node -1 [ 0.963890] alloc kstat_irqs on node -1 [ 0.963893] alloc irq_desc for 27 on node -1 [ 0.963894] alloc kstat_irqs on node -1 [ 0.963897] alloc irq_desc for 28 on node -1 [ 0.963898] alloc kstat_irqs on node -1 [ 0.963900] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.963906] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.963910] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.968639] hpet: hpet2 irq 24 for MSI [ 0.968759] hpet: hpet3 irq 25 for MSI [ 0.972696] hpet: hpet4 irq 26 for MSI [ 0.972786] hpet: hpet5 irq 27 for MSI [ 0.976780] hpet: hpet6 irq 28 for MSI [ 0.984748] Switching to clocksource tsc [ 0.985553] pnp: PnP ACPI init [ 0.985559] ACPI: bus type pnp registered [ 0.986902] pnp: PnP ACPI: found 12 devices [ 0.986903] ACPI: ACPI bus type pnp unregistered [ 0.986908] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.986910] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.986912] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.986914] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.986916] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.986920] system 00:08: ioport range 0x400-0x4cf has been reserved [ 0.986921] system 00:08: ioport range 0x4d2-0x4ff has been reserved [ 0.986925] system 00:09: iomem range 0xf4000000-0xf7ffffff has been reserved [ 0.986928] system 00:0a: iomem range 0xcd800-0xcffff has been reserved [ 0.986930] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.986932] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.986933] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.986935] system 00:0a: iomem range 0xcfbe0000-0xcfbfffff could not be reserved [ 0.986937] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.986939] system 00:0a: iomem range 0x100000-0xcfbdffff could not be reserved [ 0.986941] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.986943] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.986945] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.986947] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.986949] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.986950] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.986952] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.991628] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.991630] pci 0000:00:03.0: IO window: 0xc000-0xcfff [ 0.991633] pci 0000:00:03.0: MEM window: 0xf9000000-0xfaffffff [ 0.991636] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000efffffff [ 0.991639] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.991642] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.991645] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff [ 0.991648] pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff [ 0.991653] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.991655] pci 0000:00:1c.4: IO window: 0xb000-0xbfff [ 0.991658] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff [ 0.991661] pci 0000:00:1c.4: PREFETCH window: 0x000000f0400000-0x000000f05fffff [ 0.991666] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.991668] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.991672] pci 0000:00:1c.5: MEM window: 0xfbb00000-0xfbbfffff [ 0.991675] pci 0000:00:1c.5: PREFETCH window: 0x000000fbe00000-0x000000fbefffff [ 0.991679] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.991681] pci 0000:00:1e.0: IO window: disabled [ 0.991684] pci 0000:00:1e.0: MEM window: 0xfbc00000-0xfbcfffff [ 0.991687] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.991695] alloc irq_desc for 16 on node -1 [ 0.991696] alloc kstat_irqs on node -1 [ 0.991700] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.991703] pci 0000:00:03.0: setting latency timer to 64 [ 0.991708] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.991711] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.991715] pci 0000:00:1c.0: setting latency timer to 64 [ 0.991721] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.991723] pci 0000:00:1c.4: setting latency timer to 64 [ 0.991729] alloc irq_desc for 17 on node -1 [ 0.991730] alloc kstat_irqs on node -1 [ 0.991733] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.991736] pci 0000:00:1c.5: setting latency timer to 64 [ 0.991741] pci 0000:00:1e.0: setting latency timer to 64 [ 0.991743] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.991745] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.991747] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.991748] pci_bus 0000:01: resource 1 mem: [0xf9000000-0xfaffffff] [ 0.991750] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xefffffff] [ 0.991751] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.991753] pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf01fffff] [ 0.991754] pci_bus 0000:02: resource 2 pref mem [0xf0200000-0xf03fffff] [ 0.991756] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 0.991757] pci_bus 0000:03: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 0.991759] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff] [ 0.991760] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.991762] pci_bus 0000:04: resource 1 mem: [0xfbb00000-0xfbbfffff] [ 0.991763] pci_bus 0000:04: resource 2 pref mem [0xfbe00000-0xfbefffff] [ 0.991765] pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 0.991766] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.991768] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.991784] NET: Registered protocol family 2 [ 0.991880] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.992507] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.994610] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.994864] TCP: Hash tables configured (established 524288 bind 65536) [ 0.994866] TCP reno registered [ 0.994938] NET: Registered protocol family 1 [ 1.024867] pci 0000:01:00.0: Boot video device [ 1.024905] Unpacking initramfs... [ 1.182588] Freeing initrd memory: 9967k freed [ 1.184255] audit: initializing netlink socket (disabled) [ 1.184263] type=2000 audit(1305478697.968:1): initialized [ 1.187741] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.188614] VFS: Disk quotas dquot_6.5.2 [ 1.188645] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.188693] msgmni has been set to 7922 [ 1.188867] alg: No test for stdrng (krng) [ 1.188902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.188904] io scheduler noop registered [ 1.188905] io scheduler anticipatory registered [ 1.188906] io scheduler deadline registered [ 1.188926] io scheduler cfq registered (default) [ 1.189013] alloc irq_desc for 29 on node -1 [ 1.189014] alloc kstat_irqs on node -1 [ 1.189022] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X [ 1.189027] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.189102] alloc irq_desc for 30 on node -1 [ 1.189103] alloc kstat_irqs on node -1 [ 1.189108] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X [ 1.189114] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.189193] alloc irq_desc for 31 on node -1 [ 1.189194] alloc kstat_irqs on node -1 [ 1.189199] pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X [ 1.189205] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.189286] alloc irq_desc for 32 on node -1 [ 1.189287] alloc kstat_irqs on node -1 [ 1.189292] pcieport 0000:00:1c.5: irq 32 for MSI/MSI-X [ 1.189298] pcieport 0000:00:1c.5: setting latency timer to 64 [ 1.189353] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.190167] Linux agpgart interface v0.103 [ 1.190191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.190411] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.190444] PNP: No PS/2 controller found. Probing ports directly. [ 1.224546] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.224548] If AUX port is really absent please use the 'i8042.noaux' option. [ 1.448940] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.448993] mice: PS/2 mouse device common for all mice [ 1.449016] rtc_cmos 00:04: RTC can wake from S4 [ 1.449035] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.449058] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.449064] cpuidle: using governor ladder [ 1.449065] cpuidle: using governor menu [ 1.449068] No iBFT detected. [ 1.449267] TCP cubic registered [ 1.449332] NET: Registered protocol family 10 [ 1.449806] Mobile IPv6 [ 1.449808] NET: Registered protocol family 17 [ 1.449853] PM: Resume from disk failed. [ 1.449858] registered taskstats version 1 [ 1.450284] rtc_cmos 00:04: setting system clock to 2011-05-15 16:58:19 UTC (1305478699) [ 1.450303] Initalizing network drop monitor service [ 1.450324] Freeing unused kernel memory: 592k freed [ 1.450401] Write protecting the kernel read-only data: 4236k [ 1.459032] <30>udev[116]: starting version 167 [ 1.484923] usbcore: registered new interface driver usbfs [ 1.484943] usbcore: registered new interface driver hub [ 1.485019] usbcore: registered new device driver usb [ 1.487276] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.487297] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.487343] r8169 0000:04:00.0: setting latency timer to 64 [ 1.487385] alloc irq_desc for 33 on node -1 [ 1.487387] alloc kstat_irqs on node -1 [ 1.487400] r8169 0000:04:00.0: irq 33 for MSI/MSI-X [ 1.487892] eth0: RTL8168d/8111d at 0xffffc90000678000, 00:24:1d:d1:2a:75, XID 083000c0 IRQ 33 [ 1.489050] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.489069] alloc irq_desc for 18 on node -1 [ 1.489071] alloc kstat_irqs on node -1 [ 1.489077] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.489097] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.489100] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.489117] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.489150] ehci_hcd 0000:00:1a.7: debug port 2 [ 1.493037] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.493051] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000 [ 1.501372] eth0: unable to apply firmware patch [ 1.504884] SCSI subsystem initialized [ 1.505711] Floppy drive(s): fd0 is 1.44M [ 1.508882] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.508900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.508903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.508905] usb usb1: Product: EHCI Host Controller [ 1.508907] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 1.508909] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.508970] usb usb1: configuration #1 chosen from 1 choice [ 1.508997] hub 1-0:1.0: USB hub found [ 1.509003] hub 1-0:1.0: 6 ports detected [ 1.509056] alloc irq_desc for 23 on node -1 [ 1.509058] alloc kstat_irqs on node -1 [ 1.509063] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.509083] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.509086] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.509094] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.509121] ehci_hcd 0000:00:1d.7: debug port 2 [ 1.513027] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.513038] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000 [ 1.522141] libata version 3.00 loaded. [ 1.524987] FDC 0 is a post-1991 82077 [ 1.526514] firewire_ohci 0000:05:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.528671] ahci 0000:03:00.0: version 3.0 [ 1.528685] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.528848] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.528860] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.528862] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.528863] usb usb2: Product: EHCI Host Controller [ 1.528864] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 1.528866] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.528909] usb usb2: configuration #1 chosen from 1 choice [ 1.528934] hub 2-0:1.0: USB hub found [ 1.528939] hub 2-0:1.0: 8 ports detected [ 1.528987] ata_piix 0000:00:1f.2: version 2.13 [ 1.528997] alloc irq_desc for 19 on node -1 [ 1.528998] alloc kstat_irqs on node -1 [ 1.529004] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.529046] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.529076] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.529126] scsi0 : ata_piix [ 1.529252] scsi1 : ata_piix [ 1.529703] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 [ 1.529707] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 [ 1.529724] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.529727] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.529754] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.529785] scsi2 : ata_piix [ 1.529825] scsi3 : ata_piix [ 1.530024] uhci_hcd: USB Universal Host Controller Interface driver [ 1.530191] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 [ 1.530194] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 [ 1.530211] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.530217] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.530220] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.530228] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.530257] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 1.530280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530282] usb usb3: Product: UHCI Host Controller [ 1.530284] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.530285] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.530321] usb usb3: configuration #1 chosen from 1 choice [ 1.530337] hub 3-0:1.0: USB hub found [ 1.530340] hub 3-0:1.0: 2 ports detected [ 1.530370] alloc irq_desc for 21 on node -1 [ 1.530372] alloc kstat_irqs on node -1 [ 1.530375] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.530380] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.530382] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.530386] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.530411] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 1.530432] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530433] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530435] usb usb4: Product: UHCI Host Controller [ 1.530436] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.530437] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.530470] usb usb4: configuration #1 chosen from 1 choice [ 1.530486] hub 4-0:1.0: USB hub found [ 1.530489] hub 4-0:1.0: 2 ports detected [ 1.530518] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.530522] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.530524] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.530529] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.530548] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 1.530568] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530571] usb usb5: Product: UHCI Host Controller [ 1.530572] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.530573] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.530605] usb usb5: configuration #1 chosen from 1 choice [ 1.530622] hub 5-0:1.0: USB hub found [ 1.530625] hub 5-0:1.0: 2 ports detected [ 1.530655] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.530660] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.530662] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.530666] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.530685] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 1.530705] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530706] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530708] usb usb6: Product: UHCI Host Controller [ 1.530709] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.530710] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.530743] usb usb6: configuration #1 chosen from 1 choice [ 1.530758] hub 6-0:1.0: USB hub found [ 1.530761] hub 6-0:1.0: 2 ports detected [ 1.530790] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.530794] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.530796] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.530801] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.530820] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 1.530840] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530842] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530843] usb usb7: Product: UHCI Host Controller [ 1.530844] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.530845] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.530877] usb usb7: configuration #1 chosen from 1 choice [ 1.530894] hub 7-0:1.0: USB hub found [ 1.530897] hub 7-0:1.0: 2 ports detected [ 1.530925] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.530930] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.530933] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.530937] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.530956] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 1.530975] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530977] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530978] usb usb8: Product: UHCI Host Controller [ 1.530979] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.530981] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.531014] usb usb8: configuration #1 chosen from 1 choice [ 1.531029] hub 8-0:1.0: USB hub found [ 1.531034] hub 8-0:1.0: 2 ports detected [ 1.531063] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.531068] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.531070] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.531074] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9 [ 1.531093] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 [ 1.531112] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.531114] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.531115] usb usb9: Product: UHCI Host Controller [ 1.531116] usb usb9: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.531117] usb usb9: SerialNumber: 0000:00:1d.3 [ 1.531151] usb usb9: configuration #1 chosen from 1 choice [ 1.531166] hub 9-0:1.0: USB hub found [ 1.531170] hub 9-0:1.0: 2 ports detected [ 1.542115] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.542118] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.542123] ahci 0000:03:00.0: setting latency timer to 64 [ 1.542204] scsi4 : ahci [ 1.542255] scsi5 : ahci [ 1.542321] ata5: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16 [ 1.542324] ata6: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16 [ 1.598588] firewire_ohci: Added fw-ohci device 0000:05:07.0, OHCI version 1.10 [ 1.622839] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 1.622845] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.622868] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.622914] scsi6 : pata_jmicron [ 1.622962] scsi7 : pata_jmicron [ 1.623516] ata7: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17 [ 1.623518] ata8: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17 [ 1.785383] ata7.00: ATAPI: HP DVD Writer 1140r, FH24, max UDMA/66 [ 1.801392] ata7.00: configured for UDMA/66 [ 1.859516] ata3: SATA link down (SStatus 0 SControl 300) [ 1.870168] ata4: SATA link down (SStatus 0 SControl 300) [ 1.870198] ata5: SATA link down (SStatus 0 SControl 300) [ 1.870204] ata6: SATA link down (SStatus 0 SControl 300) [ 2.024847] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.096872] firewire_core: created device fw0: GUID 004d34440000241d, S400 [ 2.179582] ata1.00: SATA link down (SStatus 0 SControl 300) [ 2.179594] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.204757] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a [ 2.204759] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.204760] usb 6-2: Product: HP Wireless Comfort Desktop [ 2.204761] usb 6-2: Manufacturer: HP [ 2.204804] usb 6-2: configuration #1 chosen from 1 choice [ 2.212615] usbcore: registered new interface driver hiddev [ 2.226873] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1 [ 2.226899] generic-usb 0003:0461:4D5A.0001: input,hidraw0: USB HID v1.10 Keyboard [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input0 [ 2.261915] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2 [ 2.261950] generic-usb 0003:0461:4D5A.0002: input,hidraw1: USB HID v1.10 Mouse [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input1 [ 2.261960] usbcore: registered new interface driver usbhid [ 2.261962] usbhid: v2.6:USB HID core driver [ 2.324897] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.324907] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.360962] ata2.00: ATA-8: ST31000333AS, CC3H, max UDMA/133 [ 2.360964] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.420440] ata2.00: configured for UDMA/133 [ 2.420513] scsi 1:0:0:0: Direct-Access ATA ST31000333AS CC3H PQ: 0 ANSI: 5 [ 2.421764] scsi 6:0:0:0: CD-ROM HP DVD Writer 1140r FH24 PQ: 0 ANSI: 5 [ 2.592736] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.592786] sd 1:0:0:0: [sda] Write Protect is off [ 2.592788] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.592807] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.592922] sda: sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.600307] Uniform CD-ROM driver Revision: 3.20 [ 2.600362] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 2.606620] sda5 > [ 2.606794] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.608926] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.608944] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 2.843730] device-mapper: uevent: version 1.0.3 [ 2.843814] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.974515] PM: Starting manual resume from disk [ 2.974518] PM: Resume from partition 254:1 [ 2.974518] PM: Checking hibernation image. [ 2.975159] PM: Error -22 checking image file [ 2.975161] PM: Resume from disk failed. [ 2.994725] kjournald starting. Commit interval 5 seconds [ 2.994729] EXT3-fs: mounted filesystem with ordered data mode. [ 3.983196] <30>udev[449]: starting version 167 [ 4.582465] EXT3 FS on dm-0, internal journal [ 4.791222] loop: module loaded [ 5.359951] alloc irq_desc for 22 on node -1 [ 5.359953] alloc kstat_irqs on node -1 [ 5.359959] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.360023] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.393545] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 [ 7.397530] hda-intel: Codec #3 probe error; disabling it... [ 7.480372] hda_codec: ALC889A: BIOS auto-probing. [ 7.481662] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 [ 7.485661] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.485663] hda_intel: Disable MSI for Nvidia chipset [ 7.485692] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 8.317374] Adding 7921656k swap on /dev/mapper/Debian-swap_1. Priority:-1 extents:1 across:7921656k [ 9.006547] kjournald starting. Commit interval 5 seconds [ 9.007043] EXT3 FS on dm-2, internal journal [ 9.007046] EXT3-fs: mounted filesystem with ordered data mode. [ 10.239576] RPC: Registered udp transport module. [ 10.239578] RPC: Registered tcp transport module. [ 10.239579] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.269960] Slow work thread pool: Starting up [ 10.269988] Slow work thread pool: Ready [ 10.270018] FS-Cache: Loaded [ 10.285973] FS-Cache: Netfs 'nfs' registered for caching [ 10.301212] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 10.452793] fuse init (API version 7.13) [ 12.250742] Monitor-Mwait will be used to enter C-1 state [ 12.250759] Monitor-Mwait will be used to enter C-2 state [ 12.250774] Monitor-Mwait will be used to enter C-3 state [ 12.250858] processor LNXCPU:00: registered as cooling_device0 [ 12.251562] processor LNXCPU:01: registered as cooling_device1 [ 12.252098] processor LNXCPU:02: registered as cooling_device2 [ 12.252582] processor LNXCPU:03: registered as cooling_device3 [ 12.253064] processor LNXCPU:04: registered as cooling_device4 [ 12.253694] processor LNXCPU:05: registered as cooling_device5 [ 12.254360] processor LNXCPU:06: registered as cooling_device6 [ 12.254957] processor LNXCPU:07: registered as cooling_device7 [ 14.779754] r8169: eth0: link up [ 14.779765] r8169: eth0: link up [ 22.912310] Bluetooth: Core ver 2.15 [ 22.912581] NET: Registered protocol family 31 [ 22.912585] Bluetooth: HCI device and connection manager initialized [ 22.912588] Bluetooth: HCI socket layer initialized [ 22.930022] Bluetooth: L2CAP ver 2.14 [ 22.930024] Bluetooth: L2CAP socket layer initialized [ 22.947973] Bluetooth: RFCOMM TTY layer initialized [ 22.947980] Bluetooth: RFCOMM socket layer initialized [ 22.947984] Bluetooth: RFCOMM ver 1.11 [ 22.955495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.955497] Bluetooth: BNEP filters: protocol multicast [ 23.099219] Bluetooth: SCO (Voice Link) ver 0.6 [ 23.099223] Bluetooth: SCO socket layer initialized [ 24.452487] lp: driver loaded but no devices found [ 24.465095] ppdev: user-space parallel port driver [ 25.589615] eth0: no IPv6 routers present [ 26.674149] CPU0 attaching NULL sched-domain. [ 26.674156] CPU1 attaching NULL sched-domain. [ 26.674159] CPU2 attaching NULL sched-domain. [ 26.674162] CPU3 attaching NULL sched-domain. [ 26.674165] CPU4 attaching NULL sched-domain. [ 26.674168] CPU5 attaching NULL sched-domain. [ 26.674171] CPU6 attaching NULL sched-domain. [ 26.674174] CPU7 attaching NULL sched-domain. [ 26.699821] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 26.709772] NFSD: starting 90-second grace period [ 26.757768] CPU0 attaching sched-domain: [ 26.757774] domain 0: span 0,4 level SIBLING [ 26.757778] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) [ 26.757787] domain 1: span 0-7 level MC [ 26.757790] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) [ 26.757805] CPU1 attaching sched-domain: [ 26.757808] domain 0: span 1,5 level SIBLING [ 26.757811] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) [ 26.757818] domain 1: span 0-7 level MC [ 26.757821] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) [ 26.757835] CPU2 attaching sched-domain: [ 26.757838] domain 0: span 2,6 level SIBLING [ 26.757841] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) [ 26.757848] domain 1: span 0-7 level MC [ 26.757851] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) [ 26.757864] CPU3 attaching sched-domain: [ 26.757867] domain 0: span 3,7 level SIBLING [ 26.757870] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) [ 26.757878] domain 1: span 0-7 level MC [ 26.757881] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) [ 26.757894] CPU4 attaching sched-domain: [ 26.757897] domain 0: span 0,4 level SIBLING [ 26.757900] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) [ 26.757907] domain 1: span 0-7 level MC [ 26.757910] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) [ 26.757924] CPU5 attaching sched-domain: [ 26.757927] domain 0: span 1,5 level SIBLING [ 26.757930] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) [ 26.757937] domain 1: span 0-7 level MC [ 26.757940] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) [ 26.757953] CPU6 attaching sched-domain: [ 26.757956] domain 0: span 2,6 level SIBLING [ 26.757959] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) [ 26.757967] domain 1: span 0-7 level MC [ 26.757970] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) [ 26.757983] CPU7 attaching sched-domain: [ 26.757986] domain 0: span 3,7 level SIBLING [ 26.757989] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) [ 26.757996] domain 1: span 0-7 level MC [ 26.757999] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) [ 28.388995] usb 6-2: USB disconnect, address 2 [ 30.184938] usb 6-2: new low speed USB device using uhci_hcd and address 3 [ 30.368053] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a [ 30.368058] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 30.368151] usb 6-2: configuration #1 chosen from 1 choice [ 30.372050] usb 6-2: can't set config #1, error -71 [ 30.616949] usb 6-2: USB disconnect, address 3 [ 30.856924] usb 6-2: new low speed USB device using uhci_hcd and address 4 [ 31.036101] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a [ 31.036106] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 31.036110] usb 6-2: Product: HP Wireless Comfort Desktop [ 31.036113] usb 6-2: Manufacturer: HP [ 31.036201] usb 6-2: configuration #1 chosen from 1 choice [ 31.054342] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4 [ 31.054459] generic-usb 0003:0461:4D5A.0003: input,hidraw0: USB HID v1.10 Keyboard [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input0 [ 31.089406] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5 [ 31.089575] generic-usb 0003:0461:4D5A.0004: input,hidraw1: USB HID v1.10 Mouse [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input1 [ 55.453519] end_request: I/O error, dev fd0, sector 0 [ 67.633592] end_request: I/O error, dev fd0, sector 0
May 15 11:46:22 CRiSPY-V2 kernel: [59177.341565] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled May 15 11:46:22 CRiSPY-V2 kernel: [59177.342155] SGI XFS Quota Management subsystem May 15 11:46:22 CRiSPY-V2 kernel: [59177.362046] JFS: nTxBlock = 8192, nTxLock = 65536 May 15 11:46:22 CRiSPY-V2 kernel: [59177.410607] NTFS driver 2.1.30 [Flags: R/W MODULE]. May 15 11:46:22 CRiSPY-V2 kernel: [59177.467805] QNX4 filesystem 0.2.3 registered. May 15 11:46:23 CRiSPY-V2 kernel: [59177.557520] Btrfs loaded May 15 11:48:42 CRiSPY-V2 kernel: [59316.881914] nfsd: last server has exited, flushing export cache May 15 11:48:42 CRiSPY-V2 kernel: [59316.993044] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0 May 15 11:48:42 CRiSPY-V2 kernel: [59317.065207] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0 May 15 11:48:42 CRiSPY-V2 kernel: [59317.084422] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1 May 15 11:48:43 CRiSPY-V2 kernel: [59317.872881] HDMI: detected monitor SAMSUNG May 15 11:48:43 CRiSPY-V2 kernel: [59317.872884] at connection type HDMI May 15 11:48:43 CRiSPY-V2 kernel: [59317.872889] HDMI: available speakers: FL/FR May 15 11:48:43 CRiSPY-V2 kernel: [59317.872898] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24 May 15 11:48:44 CRiSPY-V2 kernel: [59318.195138] fuse exit May 15 11:48:44 CRiSPY-V2 kernel: [59318.650900] HDMI: detected monitor SAMSUNG May 15 11:48:44 CRiSPY-V2 kernel: [59318.650903] at connection type HDMI May 15 11:48:44 CRiSPY-V2 kernel: [59318.650907] HDMI: available speakers: FL/FR May 15 11:48:44 CRiSPY-V2 kernel: [59318.650913] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24 May 15 11:48:45 CRiSPY-V2 kernel: Kernel logging (proc) stopped. May 15 11:49:39 CRiSPY-V2 kernel: imklog 5.8.0, log source = /proc/kmsg started. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Initializing cgroup subsys cpuset May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Initializing cgroup subsys cpu May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] KERNEL supported cpus: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Intel GenuineIntel May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] AMD AuthenticAMD May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Centaur CentaurHauls May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-provided physical RAM map: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfbe0000 (usable) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbe0000 - 00000000cfbe2000 (ACPI NVS) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbe2000 - 00000000cfbf0000 (ACPI data) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbf0000 - 00000000cfc00000 (reserved) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMI 2.4 present. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] MTRR default type: uncachable May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] MTRR fixed ranges enabled: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 00000-9FFFF write-back May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] A0000-BFFFF uncachable May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] C0000-CCFFF write-protect May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] CD000-EFFFF uncachable May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] F0000-FFFFF write-through May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] MTRR variable ranges enabled: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 0 base 000000000 mask F00000000 write-back May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 3 base 100000000 mask FC0000000 write-back May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 4 base 130000000 mask FF0000000 uncachable May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 5 disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 6 disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 7 disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] last_pfn = 0xcfbe0 max_arch_pfn = 0x400000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] initial memory mapped : 0 - 20000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfbe0000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 0000000000 - 00cfa00000 page 2M May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 00cfa00000 - 00cfbe0000 page 4k May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] kernel direct mapping tables up to cfbe0000 @ 8000-e000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 0100000000 - 0130000000 page 2M May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] RAMDISK: 36c78000 - 37633c43 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: RSDP 00000000000f6f60 00014 (v00 GBT ) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: RSDT 00000000cfbe2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: FACP 00000000cfbe20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: DSDT 00000000cfbe2180 04B37 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: FACS 00000000cfbe0000 00040 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: HPET 00000000cfbe6e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: MCFG 00000000cfbe6e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: EUDS 00000000cfbe6ec0 00000 (v01 GBT 00000000 00000000) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: TAMG 00000000cfbe7390 00A32 (v01 GBT GBT B0 5455312E BG?? 53450101) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: APIC 00000000cfbe6d00 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: SSDT 00000000cfbe7dd0 0369C (v01 INTEL PPM RCM 80000001 INTL 20061109) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] No NUMA configuration found May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Faking a node at 0000000000000000-0000000130000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] NODE_DATA [000000000000d000 - 0000000000014fff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] bootmap [0000000000015000 - 000000000003afff] pages 26 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #3 [0036c78000 - 0037633c43] RAMDISK ==> [0036c78000 - 0037633c43] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #5 [000168b000 - 000168b0f6] BRK ==> [000168b000 - 000168b0f6] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] found SMP MP-table at [ffff8800000f55b0] f55b0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Zone PFN ranges: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Normal 0x00100000 -> 0x00130000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Movable zone start PFN for each node May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] early_node_map[3] active PFN ranges May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00000100 -> 0x000cfbe0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00100000 -> 0x00130000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] On node 0 totalpages: 1047423 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 56 pages used for memmap May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 104 pages reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 3839 pages, LIFO batch:0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] DMA32 zone: 832536 pages, LIFO batch:31 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Normal zone: 2688 pages used for memmap May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ0 used by override. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ2 used by override. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ9 used by override. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] nr_irqs_gsi: 24 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbe0000 - 00000000cfbe2000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbe2000 - 00000000cfbf0000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbf0000 - 00000000cfc00000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfc00000 - 00000000f4000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Allocating PCI resources starting at cfc00000 (gap: cfc00000:24400000) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u262144 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030295 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Policy zone: Normal May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Initializing CPU#0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Checking aperture... May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] No AGP bridge found May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Placing 64MB software IO TLB between ffff8800055de000 - ffff8800095de000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] software IO TLB at phys 0x55de000 - 0x95de000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Memory: 4046276k/4980736k available (3080k kernel code, 791044k absent, 143416k reserved, 1891k data, 592k init) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Hierarchical RCU implementation. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:472 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Console: colour VGA+ 80x25 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] console [tty0] enabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] hpet clockevent registered May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000000] Fast TSC calibration using PIT May 15 11:49:39 CRiSPY-V2 kernel: [ 0.004000] Detected 2797.808 MHz processor. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.61 BogoMIPS (lpj=11191232) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000014] Security Framework initialized May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000017] SELinux: Disabled at boot. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000228] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.000890] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001167] Mount-cache hash table entries: 256 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001246] Initializing cgroup subsys ns May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001248] Initializing cgroup subsys cpuacct May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001250] Initializing cgroup subsys devices May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001252] Initializing cgroup subsys freezer May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001253] Initializing cgroup subsys net_cls May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001267] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001268] CPU: Processor Core ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001270] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001271] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001272] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001274] CPU 0/0x0 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001276] mce: CPU supports 9 MCE banks May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001284] CPU0: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001286] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001291] using mwait in idle threads. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001293] Performance Events: Nehalem/Corei7 events, Intel PMU driver. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001296] ... version: 3 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001297] ... bit width: 48 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001298] ... generic registers: 4 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001299] ... value mask: 0000ffffffffffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001300] ... max period: 000000007fffffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001301] ... fixed-purpose events: 3 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001302] ... event mask: 000000070000000f May 15 11:49:39 CRiSPY-V2 kernel: [ 0.001921] ACPI: Core revision 20090903 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.008575] Setting APIC routing to flat May 15 11:49:39 CRiSPY-V2 kernel: [ 0.008908] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.048592] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.152683] Booting processor 1 APIC 0x2 ip 0x6000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.163106] Initializing CPU#1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240615] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240616] CPU: Processor Core ID: 1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240618] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240619] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240620] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240622] CPU 1/0x2 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240630] CPU1: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240633] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240711] CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.240716] checking TSC synchronization [CPU#0 -> CPU#1]: passed. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.260778] Booting processor 2 APIC 0x4 ip 0x6000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.271030] Initializing CPU#2 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348618] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348618] CPU: Processor Core ID: 2 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348620] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348621] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348622] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348624] CPU 2/0x4 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348632] CPU2: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348635] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348706] CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.348711] checking TSC synchronization [CPU#0 -> CPU#2]: passed. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.368772] Booting processor 3 APIC 0x6 ip 0x6000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.379024] Initializing CPU#3 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456620] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456621] CPU: Processor Core ID: 3 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456623] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456624] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456624] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456626] CPU 3/0x6 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456635] CPU3: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456637] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456700] CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.456705] checking TSC synchronization [CPU#0 -> CPU#3]: passed. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.476764] Booting processor 4 APIC 0x1 ip 0x6000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.487017] Initializing CPU#4 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564623] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564624] CPU: Processor Core ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564626] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564627] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564628] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564630] CPU 4/0x1 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564639] CPU4: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564641] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564699] CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.564706] checking TSC synchronization [CPU#0 -> CPU#4]: passed. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.584771] Booting processor 5 APIC 0x3 ip 0x6000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.595023] Initializing CPU#5 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672624] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672625] CPU: Processor Core ID: 1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672627] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672628] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672629] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672630] CPU 5/0x3 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672638] CPU5: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672641] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672699] CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.672705] checking TSC synchronization [CPU#0 -> CPU#5]: passed. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.692765] Booting processor 6 APIC 0x5 ip 0x6000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.703016] Initializing CPU#6 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780627] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780627] CPU: Processor Core ID: 2 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780629] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780630] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780631] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780633] CPU 6/0x5 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780641] CPU6: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780643] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780722] CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.780728] checking TSC synchronization [CPU#0 -> CPU#6]: passed. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.800791] Booting processor 7 APIC 0x7 ip 0x6000 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.811043] Initializing CPU#7 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888629] CPU: Physical Processor ID: 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888630] CPU: Processor Core ID: 3 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888631] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888632] CPU: L2 cache: 256K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888633] CPU: L3 cache: 8192K May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888635] CPU 7/0x7 -> Node 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888643] CPU7: Thermal monitoring enabled (TM1) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888645] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888719] CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.888725] checking TSC synchronization [CPU#0 -> CPU#7]: passed. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.908742] Brought up 8 CPUs May 15 11:49:39 CRiSPY-V2 kernel: [ 0.908744] Total of 8 processors activated (44766.10 BogoMIPS). May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911600] CPU0 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911603] domain 0: span 0,4 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911604] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911608] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911609] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911616] CPU1 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911617] domain 0: span 1,5 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911619] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911622] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911623] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911629] CPU2 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911630] domain 0: span 2,6 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911631] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911634] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911635] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911641] CPU3 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911642] domain 0: span 3,7 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911643] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911646] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911647] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911653] CPU4 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911654] domain 0: span 0,4 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911655] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911658] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911660] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911665] CPU5 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911666] domain 0: span 1,5 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911668] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911671] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911672] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911677] CPU6 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911678] domain 0: span 2,6 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911680] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911683] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911684] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911689] CPU7 attaching sched-domain: May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911691] domain 0: span 3,7 level SIBLING May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911692] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911695] domain 1: span 0-7 level MC May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911696] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.911983] devtmpfs: initialized May 15 11:49:39 CRiSPY-V2 kernel: [ 0.914985] regulator: core version 0.5 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.915017] NET: Registered protocol family 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.915074] ACPI: bus type pci registered May 15 11:49:39 CRiSPY-V2 kernel: [ 0.915120] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.915122] PCI: MCFG area at f4000000 reserved in E820 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.916256] PCI: Using MMCONFIG at f4000000 - f7ffffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.916258] PCI: Using configuration type 1 for base access May 15 11:49:39 CRiSPY-V2 kernel: [ 0.916601] bio: create slab <bio-0> at 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.917049] ACPI: EC: Look up EC in DSDT May 15 11:49:39 CRiSPY-V2 kernel: [ 0.920893] ACPI: Interpreter enabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.920895] ACPI: (supports S0 S3 S4 S5) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.920908] ACPI: Using IOAPIC for interrupt routing May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924109] ACPI: No dock devices found. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924179] ACPI: PCI Root Bridge [PCI0] (0000:00) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924271] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924273] pci 0000:00:03.0: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924502] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924560] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924618] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924683] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbfff000-0xfbfff3ff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924730] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924734] pci 0000:00:1a.7: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924768] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924803] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924806] pci 0000:00:1b.0: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924858] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924861] pci 0000:00:1c.0: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924916] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924919] pci 0000:00:1c.4: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924971] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.924974] pci 0000:00:1c.5: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925020] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925078] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925137] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925196] pci 0000:00:1d.3: reg 20 io port: [0xf900-0xf91f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925257] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbffe000-0xfbffe3ff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925303] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925307] pci 0000:00:1d.7: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925456] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925460] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925464] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925469] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925473] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf40f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925477] pci 0000:00:1f.2: reg 24 io port: [0xf300-0xf30f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925516] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbffd000-0xfbffd0ff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925527] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925563] pci 0000:00:1f.5: reg 10 io port: [0xf100-0xf107] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925567] pci 0000:00:1f.5: reg 14 io port: [0xf000-0xf003] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925572] pci 0000:00:1f.5: reg 18 io port: [0xef00-0xef07] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925576] pci 0000:00:1f.5: reg 1c io port: [0xee00-0xee03] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925580] pci 0000:00:1f.5: reg 20 io port: [0xed00-0xed0f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925585] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925632] pci 0000:01:00.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925638] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925645] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xee000000-0xefffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925650] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925654] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.925699] pci 0000:01:00.1: reg 10 32bit mmio: [0xfaffc000-0xfaffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932676] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932679] pci 0000:00:03.0: bridge 32bit mmio: [0xf9000000-0xfaffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932683] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932799] pci 0000:03:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932835] pci 0000:03:00.0: PME# supported from D3hot May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932839] pci 0000:03:00.0: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932888] pci 0000:03:00.1: reg 10 io port: [0xbf00-0xbf07] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932896] pci 0000:03:00.1: reg 14 io port: [0xbe00-0xbe03] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932903] pci 0000:03:00.1: reg 18 io port: [0xbd00-0xbd07] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932911] pci 0000:03:00.1: reg 1c io port: [0xbc00-0xbc03] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932919] pci 0000:03:00.1: reg 20 io port: [0xbb00-0xbb0f] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.932982] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933044] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933046] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933090] pci 0000:04:00.0: reg 10 io port: [0xde00-0xdeff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933108] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xfbeff000-0xfbefffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933120] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfbef8000-0xfbefbfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933127] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933163] pci 0000:04:00.0: supports D1 D2 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933164] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold May 15 11:49:39 CRiSPY-V2 kernel: [ 0.933168] pci 0000:04:00.0: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940694] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940697] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940701] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfbe00000-0xfbefffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940739] pci 0000:05:07.0: reg 10 32bit mmio: [0xfbcff000-0xfbcff7ff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940745] pci 0000:05:07.0: reg 14 32bit mmio: [0xfbcf8000-0xfbcfbfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940783] pci 0000:05:07.0: supports D1 D2 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940784] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940787] pci 0000:05:07.0: PME# disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940823] pci 0000:00:1e.0: transparent bridge May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940827] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.940849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.941013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.941058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.941103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.941145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959165] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959235] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959303] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959371] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959439] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959507] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959575] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959643] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959707] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959710] vgaarb: loaded May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959748] PCI: Using ACPI for IRQ routing May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959882] alloc irq_desc for 24 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959884] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959888] alloc irq_desc for 25 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959889] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959892] alloc irq_desc for 26 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959893] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959897] alloc irq_desc for 27 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959898] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959900] alloc irq_desc for 28 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959901] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959904] HPET: 8 timers in total, 5 timers will be used for per-cpu timer May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959910] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.959914] hpet0: 8 comparators, 64-bit 14.318180 MHz counter May 15 11:49:39 CRiSPY-V2 kernel: [ 0.964639] hpet: hpet2 irq 24 for MSI May 15 11:49:39 CRiSPY-V2 kernel: [ 0.964759] hpet: hpet3 irq 25 for MSI May 15 11:49:39 CRiSPY-V2 kernel: [ 0.968752] hpet: hpet4 irq 26 for MSI May 15 11:49:39 CRiSPY-V2 kernel: [ 0.972744] hpet: hpet5 irq 27 for MSI May 15 11:49:39 CRiSPY-V2 kernel: [ 0.976739] hpet: hpet6 irq 28 for MSI May 15 11:49:39 CRiSPY-V2 kernel: [ 0.984753] Switching to clocksource tsc May 15 11:49:39 CRiSPY-V2 kernel: [ 0.985551] pnp: PnP ACPI init May 15 11:49:39 CRiSPY-V2 kernel: [ 0.985557] ACPI: bus type pnp registered May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986897] pnp: PnP ACPI: found 12 devices May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986899] ACPI: ACPI bus type pnp unregistered May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986904] system 00:01: ioport range 0x4d0-0x4d1 has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986906] system 00:01: ioport range 0x290-0x29f has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986908] system 00:01: ioport range 0x800-0x87f has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986909] system 00:01: ioport range 0x290-0x294 has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986911] system 00:01: ioport range 0x880-0x88f has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986915] system 00:08: ioport range 0x400-0x4cf has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986917] system 00:08: ioport range 0x4d2-0x4ff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986920] system 00:09: iomem range 0xf4000000-0xf7ffffff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986923] system 00:0a: iomem range 0xcd800-0xcffff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986925] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986927] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986929] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986931] system 00:0a: iomem range 0xcfbe0000-0xcfbfffff could not be reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986933] system 00:0a: iomem range 0x0-0x9ffff could not be reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986935] system 00:0a: iomem range 0x100000-0xcfbdffff could not be reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986937] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986939] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986940] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986942] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986944] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986946] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.986948] system 00:0a: iomem range 0xe0000-0xeffff has been reserved May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991623] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991625] pci 0000:00:03.0: IO window: 0xc000-0xcfff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991628] pci 0000:00:03.0: MEM window: 0xf9000000-0xfaffffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991631] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000efffffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991635] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991637] pci 0000:00:1c.0: IO window: 0x1000-0x1fff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991640] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991643] pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991648] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991650] pci 0000:00:1c.4: IO window: 0xb000-0xbfff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991653] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991656] pci 0000:00:1c.4: PREFETCH window: 0x000000f0400000-0x000000f05fffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991661] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991663] pci 0000:00:1c.5: IO window: 0xd000-0xdfff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991667] pci 0000:00:1c.5: MEM window: 0xfbb00000-0xfbbfffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991670] pci 0000:00:1c.5: PREFETCH window: 0x000000fbe00000-0x000000fbefffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991674] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991675] pci 0000:00:1e.0: IO window: disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991679] pci 0000:00:1e.0: MEM window: 0xfbc00000-0xfbcfffff May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991682] pci 0000:00:1e.0: PREFETCH window: disabled May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991690] alloc irq_desc for 16 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991691] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991695] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991698] pci 0000:00:03.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991703] pci 0000:00:1c.0: enabling device (0000 -> 0003) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991706] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991709] pci 0000:00:1c.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991715] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991718] pci 0000:00:1c.4: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991724] alloc irq_desc for 17 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991725] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991728] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991731] pci 0000:00:1c.5: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991735] pci 0000:00:1e.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991738] pci_bus 0000:00: resource 0 io: [0x00-0xffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991740] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991741] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991743] pci_bus 0000:01: resource 1 mem: [0xf9000000-0xfaffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991744] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xefffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991746] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991747] pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf01fffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991749] pci_bus 0000:02: resource 2 pref mem [0xf0200000-0xf03fffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991751] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991752] pci_bus 0000:03: resource 1 mem: [0xfbd00000-0xfbdfffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991753] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991755] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991756] pci_bus 0000:04: resource 1 mem: [0xfbb00000-0xfbbfffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991758] pci_bus 0000:04: resource 2 pref mem [0xfbe00000-0xfbefffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991759] pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991761] pci_bus 0000:05: resource 3 io: [0x00-0xffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991762] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991779] NET: Registered protocol family 2 May 15 11:49:39 CRiSPY-V2 kernel: [ 0.991876] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.992501] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.994604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.994858] TCP: Hash tables configured (established 524288 bind 65536) May 15 11:49:39 CRiSPY-V2 kernel: [ 0.994859] TCP reno registered May 15 11:49:39 CRiSPY-V2 kernel: [ 0.994932] NET: Registered protocol family 1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.024868] pci 0000:01:00.0: Boot video device May 15 11:49:39 CRiSPY-V2 kernel: [ 1.024906] Unpacking initramfs... May 15 11:49:39 CRiSPY-V2 kernel: [ 1.182566] Freeing initrd memory: 9967k freed May 15 11:49:39 CRiSPY-V2 kernel: [ 1.184237] audit: initializing netlink socket (disabled) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.184245] type=2000 audit(1305478167.968:1): initialized May 15 11:49:39 CRiSPY-V2 kernel: [ 1.187751] HugeTLB registered 2 MB page size, pre-allocated 0 pages May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188625] VFS: Disk quotas dquot_6.5.2 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188657] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188705] msgmni has been set to 7922 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188886] alg: No test for stdrng (krng) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188923] io scheduler noop registered May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188924] io scheduler anticipatory registered May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188925] io scheduler deadline registered May 15 11:49:39 CRiSPY-V2 kernel: [ 1.188945] io scheduler cfq registered (default) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189032] alloc irq_desc for 29 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189033] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189041] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189046] pcieport 0000:00:03.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189121] alloc irq_desc for 30 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189122] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189128] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189133] pcieport 0000:00:1c.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189213] alloc irq_desc for 31 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189214] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189219] pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189225] pcieport 0000:00:1c.4: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189305] alloc irq_desc for 32 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189306] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189311] pcieport 0000:00:1c.5: irq 32 for MSI/MSI-X May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189317] pcieport 0000:00:1c.5: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.189372] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support May 15 11:49:39 CRiSPY-V2 kernel: [ 1.190186] Linux agpgart interface v0.103 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.190210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled May 15 11:49:39 CRiSPY-V2 kernel: [ 1.190429] input: Macintosh mouse button emulation as /devices/virtual/input/input0 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.190463] PNP: No PS/2 controller found. Probing ports directly. May 15 11:49:39 CRiSPY-V2 kernel: [ 1.224821] Failed to disable AUX port, but continuing anyway... Is this a SiS? May 15 11:49:39 CRiSPY-V2 kernel: [ 1.224822] If AUX port is really absent please use the 'i8042.noaux' option. May 15 11:49:39 CRiSPY-V2 kernel: [ 1.452938] serio: i8042 KBD port at 0x60,0x64 irq 1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.452988] mice: PS/2 mouse device common for all mice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453011] rtc_cmos 00:04: RTC can wake from S4 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453030] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453053] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453059] cpuidle: using governor ladder May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453060] cpuidle: using governor menu May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453063] No iBFT detected. May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453262] TCP cubic registered May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453327] NET: Registered protocol family 10 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453802] Mobile IPv6 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453804] NET: Registered protocol family 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453849] PM: Resume from disk failed. May 15 11:49:39 CRiSPY-V2 kernel: [ 1.453854] registered taskstats version 1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.454278] rtc_cmos 00:04: setting system clock to 2011-05-15 16:49:29 UTC (1305478169) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.454297] Initalizing network drop monitor service May 15 11:49:39 CRiSPY-V2 kernel: [ 1.454317] Freeing unused kernel memory: 592k freed May 15 11:49:39 CRiSPY-V2 kernel: [ 1.454395] Write protecting the kernel read-only data: 4236k May 15 11:49:39 CRiSPY-V2 kernel: [ 1.463049] <30>udev[116]: starting version 167 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.490745] usbcore: registered new interface driver usbfs May 15 11:49:39 CRiSPY-V2 kernel: [ 1.490765] usbcore: registered new interface driver hub May 15 11:49:39 CRiSPY-V2 kernel: [ 1.490795] usbcore: registered new device driver usb May 15 11:49:39 CRiSPY-V2 kernel: [ 1.501099] SCSI subsystem initialized May 15 11:49:39 CRiSPY-V2 kernel: [ 1.501782] Floppy drive(s): fd0 is 1.44M May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502786] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502807] alloc irq_desc for 18 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502808] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502814] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502840] ehci_hcd 0000:00:1a.7: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502843] ehci_hcd 0000:00:1a.7: EHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502856] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.502884] ehci_hcd 0000:00:1a.7: debug port 2 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.506808] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported May 15 11:49:39 CRiSPY-V2 kernel: [ 1.506837] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.513273] libata version 3.00 loaded. May 15 11:49:39 CRiSPY-V2 kernel: [ 1.513929] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.513934] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.513953] pata_jmicron 0000:03:00.1: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.513999] scsi0 : pata_jmicron May 15 11:49:39 CRiSPY-V2 kernel: [ 1.514050] scsi1 : pata_jmicron May 15 11:49:39 CRiSPY-V2 kernel: [ 1.514532] ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.514534] ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.519696] ahci 0000:03:00.0: version 3.0 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.519710] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.520862] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded May 15 11:49:39 CRiSPY-V2 kernel: [ 1.520876] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521611] r8169 0000:04:00.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521657] alloc irq_desc for 33 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521658] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521670] r8169 0000:04:00.0: irq 33 for MSI/MSI-X May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521854] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521871] usb usb1: Product: EHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521872] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521874] usb usb1: SerialNumber: 0000:00:1a.7 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521918] usb usb1: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521948] hub 1-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.521954] hub 1-0:1.0: 6 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522000] ata_piix 0000:00:1f.2: version 2.13 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522010] alloc irq_desc for 19 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522011] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522015] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522019] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522046] ata_piix 0000:00:1f.2: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522054] eth0: RTL8168d/8111d at 0xffffc90000638000, 00:24:1d:d1:2a:75, XID 083000c0 IRQ 33 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522089] scsi2 : ata_piix May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522136] scsi3 : ata_piix May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522258] FDC 0 is a post-1991 82077 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522567] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522571] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522602] alloc irq_desc for 23 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522603] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522608] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522617] ehci_hcd 0000:00:1d.7: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522619] ehci_hcd 0000:00:1d.7: EHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522626] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.522649] ehci_hcd 0000:00:1d.7: debug port 2 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.526541] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported May 15 11:49:39 CRiSPY-V2 kernel: [ 1.526551] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.534372] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode May 15 11:49:39 CRiSPY-V2 kernel: [ 1.534375] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 15 11:49:39 CRiSPY-V2 kernel: [ 1.534380] ahci 0000:03:00.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.534471] scsi4 : ahci May 15 11:49:39 CRiSPY-V2 kernel: [ 1.534525] scsi5 : ahci May 15 11:49:39 CRiSPY-V2 kernel: [ 1.534590] ata5: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.534593] ata6: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.535620] eth0: unable to apply firmware patch May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540851] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540862] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540863] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540865] usb usb2: Product: EHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540866] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540867] usb usb2: SerialNumber: 0000:00:1d.7 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540905] usb usb2: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540928] hub 2-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540933] hub 2-0:1.0: 8 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540992] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.540996] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] May 15 11:49:39 CRiSPY-V2 kernel: [ 1.541018] ata_piix 0000:00:1f.5: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.541050] scsi6 : ata_piix May 15 11:49:39 CRiSPY-V2 kernel: [ 1.541088] scsi7 : ata_piix May 15 11:49:39 CRiSPY-V2 kernel: [ 1.541464] ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.541467] ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591063] uhci_hcd: USB Universal Host Controller Interface driver May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591081] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591086] uhci_hcd 0000:00:1a.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591088] uhci_hcd 0000:00:1a.0: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591093] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591114] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591135] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591137] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591138] usb usb3: Product: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591139] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591140] usb usb3: SerialNumber: 0000:00:1a.0 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591180] usb usb3: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591196] hub 3-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591202] hub 3-0:1.0: 2 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591232] alloc irq_desc for 21 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591233] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591237] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591242] uhci_hcd 0000:00:1a.1: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591244] uhci_hcd 0000:00:1a.1: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591249] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591274] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591295] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591296] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591297] usb usb4: Product: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591299] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591300] usb usb4: SerialNumber: 0000:00:1a.1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591334] usb usb4: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591350] hub 4-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591353] hub 4-0:1.0: 2 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591383] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591388] uhci_hcd 0000:00:1a.2: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591390] uhci_hcd 0000:00:1a.2: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591394] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591413] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591433] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591434] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591436] usb usb5: Product: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591437] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591438] usb usb5: SerialNumber: 0000:00:1a.2 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591470] usb usb5: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591487] hub 5-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591490] hub 5-0:1.0: 2 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591519] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591523] uhci_hcd 0000:00:1d.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591525] uhci_hcd 0000:00:1d.0: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591529] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591548] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591568] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591569] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591570] usb usb6: Product: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591572] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591573] usb usb6: SerialNumber: 0000:00:1d.0 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591606] usb usb6: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591622] hub 6-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591625] hub 6-0:1.0: 2 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591654] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591658] uhci_hcd 0000:00:1d.1: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591660] uhci_hcd 0000:00:1d.1: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591664] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591684] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591703] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591704] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591706] usb usb7: Product: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591707] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591708] usb usb7: SerialNumber: 0000:00:1d.1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591741] usb usb7: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591757] hub 7-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591760] hub 7-0:1.0: 2 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591789] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591793] uhci_hcd 0000:00:1d.2: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591795] uhci_hcd 0000:00:1d.2: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591799] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591819] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591840] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591841] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591843] usb usb8: Product: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591844] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591845] usb usb8: SerialNumber: 0000:00:1d.2 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591878] usb usb8: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591895] hub 8-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591899] hub 8-0:1.0: 2 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591927] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591931] uhci_hcd 0000:00:1d.3: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591933] uhci_hcd 0000:00:1d.3: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591938] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591958] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591977] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591979] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591980] usb usb9: Product: UHCI Host Controller May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591981] usb usb9: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:49:39 CRiSPY-V2 kernel: [ 1.591982] usb usb9: SerialNumber: 0000:00:1d.3 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.592016] usb usb9: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 1.592032] hub 9-0:1.0: USB hub found May 15 11:49:39 CRiSPY-V2 kernel: [ 1.592036] hub 9-0:1.0: 2 ports detected May 15 11:49:39 CRiSPY-V2 kernel: [ 1.677394] ata1.00: ATAPI: HP DVD Writer 1140r, FH24, max UDMA/66 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.693646] ata1.00: configured for UDMA/66 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.695711] scsi 0:0:0:0: CD-ROM HP DVD Writer 1140r FH24 PQ: 0 ANSI: 5 May 15 11:49:39 CRiSPY-V2 kernel: [ 1.854112] ata6: SATA link down (SStatus 0 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.854144] ata5: SATA link down (SStatus 0 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.871509] ata7: SATA link down (SStatus 0 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 1.882157] ata8: SATA link down (SStatus 0 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 2.036854] usb 6-2: new low speed USB device using uhci_hcd and address 2 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.175540] ata3.00: SATA link down (SStatus 0 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 2.175554] ata3.01: SATA link down (SStatus 0 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 2.216616] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a May 15 11:49:39 CRiSPY-V2 kernel: [ 2.216618] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.216620] usb 6-2: Product: HP Wireless Comfort Desktop May 15 11:49:39 CRiSPY-V2 kernel: [ 2.216621] usb 6-2: Manufacturer: HP May 15 11:49:39 CRiSPY-V2 kernel: [ 2.216661] usb 6-2: configuration #1 chosen from 1 choice May 15 11:49:39 CRiSPY-V2 kernel: [ 2.224434] usbcore: registered new interface driver hiddev May 15 11:49:39 CRiSPY-V2 kernel: [ 2.238731] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.238753] generic-usb 0003:0461:4D5A.0001: input,hidraw0: USB HID v1.10 Keyboard [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input0 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.273774] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.273810] generic-usb 0003:0461:4D5A.0002: input,hidraw1: USB HID v1.10 Mouse [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input1 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.273822] usbcore: registered new interface driver usbhid May 15 11:49:39 CRiSPY-V2 kernel: [ 2.273823] usbhid: v2.6:USB HID core driver May 15 11:49:39 CRiSPY-V2 kernel: [ 2.328902] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 2.328912] ata4.01: SATA link down (SStatus 0 SControl 300) May 15 11:49:39 CRiSPY-V2 kernel: [ 2.368731] ata4.00: ATA-8: ST31000333AS, CC3H, max UDMA/133 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.368733] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) May 15 11:49:39 CRiSPY-V2 kernel: [ 2.424455] ata4.00: configured for UDMA/133 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.424514] scsi 3:0:0:0: Direct-Access ATA ST31000333AS CC3H PQ: 0 ANSI: 5 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.428769] firewire_ohci 0000:05:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437517] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437519] Uniform CD-ROM driver Revision: 3.20 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437573] sr 0:0:0:0: Attached scsi CD-ROM sr0 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437642] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437692] sd 3:0:0:0: [sda] Write Protect is off May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437695] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437717] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 15 11:49:39 CRiSPY-V2 kernel: [ 2.437850] sda: May 15 11:49:39 CRiSPY-V2 kernel: [ 2.439709] sr 0:0:0:0: Attached scsi generic sg0 type 5 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.439736] sd 3:0:0:0: Attached scsi generic sg1 type 0 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.442065] sda1 sda2 < sda5 > May 15 11:49:39 CRiSPY-V2 kernel: [ 2.450833] sd 3:0:0:0: [sda] Attached SCSI disk May 15 11:49:39 CRiSPY-V2 kernel: [ 2.496849] firewire_ohci: Added fw-ohci device 0000:05:07.0, OHCI version 1.10 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.712737] device-mapper: uevent: version 1.0.3 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.712835] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com May 15 11:49:39 CRiSPY-V2 kernel: [ 2.843585] PM: Starting manual resume from disk May 15 11:49:39 CRiSPY-V2 kernel: [ 2.843587] PM: Resume from partition 254:1 May 15 11:49:39 CRiSPY-V2 kernel: [ 2.843588] PM: Checking hibernation image. May 15 11:49:39 CRiSPY-V2 kernel: [ 2.844176] PM: Error -22 checking image file May 15 11:49:39 CRiSPY-V2 kernel: [ 2.844178] PM: Resume from disk failed. May 15 11:49:39 CRiSPY-V2 kernel: [ 2.863742] kjournald starting. Commit interval 5 seconds May 15 11:49:39 CRiSPY-V2 kernel: [ 2.863746] EXT3-fs: mounted filesystem with ordered data mode. May 15 11:49:39 CRiSPY-V2 kernel: [ 2.996886] firewire_core: created device fw0: GUID 004d34440000241d, S400 May 15 11:49:39 CRiSPY-V2 kernel: [ 3.843888] <30>udev[451]: starting version 167 May 15 11:49:39 CRiSPY-V2 kernel: [ 4.434826] EXT3 FS on dm-0, internal journal May 15 11:49:39 CRiSPY-V2 kernel: [ 4.776826] loop: module loaded May 15 11:49:39 CRiSPY-V2 kernel: [ 5.442593] alloc irq_desc for 22 on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 5.442595] alloc kstat_irqs on node -1 May 15 11:49:39 CRiSPY-V2 kernel: [ 5.442601] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 May 15 11:49:39 CRiSPY-V2 kernel: [ 5.442662] HDA Intel 0000:00:1b.0: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 6.477583] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 May 15 11:49:39 CRiSPY-V2 kernel: [ 7.481582] hda-intel: Codec #3 probe error; disabling it... May 15 11:49:39 CRiSPY-V2 kernel: [ 7.557587] hda_codec: ALC889A: BIOS auto-probing. May 15 11:49:39 CRiSPY-V2 kernel: [ 7.558886] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 May 15 11:49:39 CRiSPY-V2 kernel: [ 7.563182] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:49:39 CRiSPY-V2 kernel: [ 7.563185] hda_intel: Disable MSI for Nvidia chipset May 15 11:49:39 CRiSPY-V2 kernel: [ 7.563214] HDA Intel 0000:01:00.1: setting latency timer to 64 May 15 11:49:39 CRiSPY-V2 kernel: [ 8.411319] Adding 7921656k swap on /dev/mapper/Debian-swap_1. Priority:-1 extents:1 across:7921656k May 15 11:49:39 CRiSPY-V2 kernel: [ 9.092117] kjournald starting. Commit interval 5 seconds May 15 11:49:39 CRiSPY-V2 kernel: [ 9.092612] EXT3 FS on dm-2, internal journal May 15 11:49:39 CRiSPY-V2 kernel: [ 9.092615] EXT3-fs: mounted filesystem with ordered data mode. May 15 11:49:39 CRiSPY-V2 kernel: [ 10.350111] RPC: Registered udp transport module. May 15 11:49:39 CRiSPY-V2 kernel: [ 10.350112] RPC: Registered tcp transport module. May 15 11:49:39 CRiSPY-V2 kernel: [ 10.350114] RPC: Registered tcp NFSv4.1 backchannel transport module. May 15 11:49:39 CRiSPY-V2 kernel: [ 10.380513] Slow work thread pool: Starting up May 15 11:49:39 CRiSPY-V2 kernel: [ 10.380543] Slow work thread pool: Ready May 15 11:49:39 CRiSPY-V2 kernel: [ 10.380570] FS-Cache: Loaded May 15 11:49:39 CRiSPY-V2 kernel: [ 10.397257] FS-Cache: Netfs 'nfs' registered for caching May 15 11:49:39 CRiSPY-V2 kernel: [ 10.460054] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). May 15 11:49:39 CRiSPY-V2 kernel: [ 10.605840] fuse init (API version 7.13) May 15 11:49:40 CRiSPY-V2 kernel: [ 12.303093] Monitor-Mwait will be used to enter C-1 state May 15 11:49:40 CRiSPY-V2 kernel: [ 12.303110] Monitor-Mwait will be used to enter C-2 state May 15 11:49:40 CRiSPY-V2 kernel: [ 12.303125] Monitor-Mwait will be used to enter C-3 state May 15 11:49:40 CRiSPY-V2 kernel: [ 12.303200] processor LNXCPU:00: registered as cooling_device0 May 15 11:49:40 CRiSPY-V2 kernel: [ 12.303876] processor LNXCPU:01: registered as cooling_device1 May 15 11:49:40 CRiSPY-V2 kernel: [ 12.304422] processor LNXCPU:02: registered as cooling_device2 May 15 11:49:40 CRiSPY-V2 kernel: [ 12.304940] processor LNXCPU:03: registered as cooling_device3 May 15 11:49:40 CRiSPY-V2 kernel: [ 12.305468] processor LNXCPU:04: registered as cooling_device4 May 15 11:49:40 CRiSPY-V2 kernel: [ 12.306050] processor LNXCPU:05: registered as cooling_device5 May 15 11:49:40 CRiSPY-V2 kernel: [ 12.306641] processor LNXCPU:06: registered as cooling_device6 May 15 11:49:40 CRiSPY-V2 kernel: [ 12.307123] processor LNXCPU:07: registered as cooling_device7 May 15 11:49:42 CRiSPY-V2 kernel: [ 14.498225] r8169: eth0: link up May 15 11:49:42 CRiSPY-V2 kernel: [ 14.498235] r8169: eth0: link up May 15 11:49:49 CRiSPY-V2 kernel: [ 21.597568] Bluetooth: Core ver 2.15 May 15 11:49:49 CRiSPY-V2 kernel: [ 21.597757] NET: Registered protocol family 31 May 15 11:49:49 CRiSPY-V2 kernel: [ 21.597759] Bluetooth: HCI device and connection manager initialized May 15 11:49:49 CRiSPY-V2 kernel: [ 21.597761] Bluetooth: HCI socket layer initialized May 15 11:49:49 CRiSPY-V2 kernel: [ 21.729258] Bluetooth: L2CAP ver 2.14 May 15 11:49:49 CRiSPY-V2 kernel: [ 21.729262] Bluetooth: L2CAP socket layer initialized May 15 11:49:49 CRiSPY-V2 kernel: [ 21.734971] Bluetooth: RFCOMM TTY layer initialized May 15 11:49:49 CRiSPY-V2 kernel: [ 21.734975] Bluetooth: RFCOMM socket layer initialized May 15 11:49:49 CRiSPY-V2 kernel: [ 21.734976] Bluetooth: RFCOMM ver 1.11 May 15 11:49:49 CRiSPY-V2 kernel: [ 21.888959] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 May 15 11:49:49 CRiSPY-V2 kernel: [ 21.888961] Bluetooth: BNEP filters: protocol multicast May 15 11:49:50 CRiSPY-V2 kernel: [ 21.959680] Bluetooth: SCO (Voice Link) ver 0.6 May 15 11:49:50 CRiSPY-V2 kernel: [ 21.959684] Bluetooth: SCO socket layer initialized May 15 11:49:50 CRiSPY-V2 kernel: [ 22.293566] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory May 15 11:49:50 CRiSPY-V2 kernel: [ 22.322751] NFSD: starting 90-second grace period May 15 11:49:50 CRiSPY-V2 kernel: [ 22.447500] lp: driver loaded but no devices found May 15 11:49:50 CRiSPY-V2 kernel: [ 22.457249] ppdev: user-space parallel port driver May 15 11:49:52 CRiSPY-V2 kernel: [ 24.537771] eth0: no IPv6 routers present May 15 11:51:22 CRiSPY-V2 kernel: [ 114.250852] nfsd: last server has exited, flushing export cache May 15 11:51:22 CRiSPY-V2 kernel: [ 115.098382] fuse exit May 15 11:51:24 CRiSPY-V2 kernel: Kernel logging (proc) stopped. May 15 11:52:14 CRiSPY-V2 kernel: imklog 5.8.0, log source = /proc/kmsg started. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Initializing cgroup subsys cpuset May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Initializing cgroup subsys cpu May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] KERNEL supported cpus: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Intel GenuineIntel May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] AMD AuthenticAMD May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Centaur CentaurHauls May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-provided physical RAM map: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfbe0000 (usable) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbe0000 - 00000000cfbe2000 (ACPI NVS) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbe2000 - 00000000cfbf0000 (ACPI data) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbf0000 - 00000000cfc00000 (reserved) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMI 2.4 present. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] MTRR default type: uncachable May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] MTRR fixed ranges enabled: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 00000-9FFFF write-back May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] A0000-BFFFF uncachable May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] C0000-CCFFF write-protect May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] CD000-EFFFF uncachable May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] F0000-FFFFF write-through May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] MTRR variable ranges enabled: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 0 base 000000000 mask F00000000 write-back May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 3 base 100000000 mask FC0000000 write-back May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 4 base 130000000 mask FF0000000 uncachable May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 5 disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 6 disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 7 disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] last_pfn = 0xcfbe0 max_arch_pfn = 0x400000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] initial memory mapped : 0 - 20000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfbe0000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 0000000000 - 00cfa00000 page 2M May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 00cfa00000 - 00cfbe0000 page 4k May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] kernel direct mapping tables up to cfbe0000 @ 8000-e000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 0100000000 - 0130000000 page 2M May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] RAMDISK: 36c78000 - 37633c43 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: RSDP 00000000000f6f60 00014 (v00 GBT ) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: RSDT 00000000cfbe2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: FACP 00000000cfbe20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: DSDT 00000000cfbe2180 04B37 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: FACS 00000000cfbe0000 00040 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: HPET 00000000cfbe6e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: MCFG 00000000cfbe6e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: EUDS 00000000cfbe6ec0 00000 (v01 GBT 00000000 00000000) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: TAMG 00000000cfbe7390 00A32 (v01 GBT GBT B0 5455312E BG?? 53450101) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: APIC 00000000cfbe6d00 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: SSDT 00000000cfbe7dd0 0369C (v01 INTEL PPM RCM 80000001 INTL 20061109) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] No NUMA configuration found May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Faking a node at 0000000000000000-0000000130000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] NODE_DATA [000000000000d000 - 0000000000014fff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] bootmap [0000000000015000 - 000000000003afff] pages 26 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #3 [0036c78000 - 0037633c43] RAMDISK ==> [0036c78000 - 0037633c43] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #5 [000168b000 - 000168b0f6] BRK ==> [000168b000 - 000168b0f6] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] found SMP MP-table at [ffff8800000f55b0] f55b0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Zone PFN ranges: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Normal 0x00100000 -> 0x00130000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Movable zone start PFN for each node May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] early_node_map[3] active PFN ranges May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00000100 -> 0x000cfbe0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00100000 -> 0x00130000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] On node 0 totalpages: 1047423 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 56 pages used for memmap May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 104 pages reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 3839 pages, LIFO batch:0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] DMA32 zone: 832536 pages, LIFO batch:31 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Normal zone: 2688 pages used for memmap May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ0 used by override. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ2 used by override. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ9 used by override. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] nr_irqs_gsi: 24 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbe0000 - 00000000cfbe2000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbe2000 - 00000000cfbf0000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbf0000 - 00000000cfc00000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfc00000 - 00000000f4000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Allocating PCI resources starting at cfc00000 (gap: cfc00000:24400000) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u262144 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030295 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Policy zone: Normal May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Initializing CPU#0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Checking aperture... May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] No AGP bridge found May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Placing 64MB software IO TLB between ffff8800055de000 - ffff8800095de000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] software IO TLB at phys 0x55de000 - 0x95de000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Memory: 4046276k/4980736k available (3080k kernel code, 791044k absent, 143416k reserved, 1891k data, 592k init) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Hierarchical RCU implementation. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:472 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Console: colour VGA+ 80x25 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] console [tty0] enabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] hpet clockevent registered May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000000] Fast TSC calibration using PIT May 15 11:52:14 CRiSPY-V2 kernel: [ 0.004000] Detected 2797.837 MHz processor. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.67 BogoMIPS (lpj=11191348) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000013] Security Framework initialized May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000016] SELinux: Disabled at boot. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000227] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.000887] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001163] Mount-cache hash table entries: 256 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001241] Initializing cgroup subsys ns May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001244] Initializing cgroup subsys cpuacct May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001246] Initializing cgroup subsys devices May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001248] Initializing cgroup subsys freezer May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001249] Initializing cgroup subsys net_cls May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001262] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001263] CPU: Processor Core ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001266] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001267] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001268] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001270] CPU 0/0x0 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001272] mce: CPU supports 9 MCE banks May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001279] CPU0: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001282] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001287] using mwait in idle threads. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001289] Performance Events: Nehalem/Corei7 events, Intel PMU driver. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001292] ... version: 3 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001293] ... bit width: 48 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001294] ... generic registers: 4 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001295] ... value mask: 0000ffffffffffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001296] ... max period: 000000007fffffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001297] ... fixed-purpose events: 3 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001298] ... event mask: 000000070000000f May 15 11:52:14 CRiSPY-V2 kernel: [ 0.001916] ACPI: Core revision 20090903 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.008545] Setting APIC routing to flat May 15 11:52:14 CRiSPY-V2 kernel: [ 0.008877] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.048452] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.152266] Booting processor 1 APIC 0x2 ip 0x6000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.162679] Initializing CPU#1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239959] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239959] CPU: Processor Core ID: 1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239961] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239963] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239963] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239965] CPU 1/0x2 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239974] CPU1: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.239976] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.240056] CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.240062] checking TSC synchronization [CPU#0 -> CPU#1]: passed. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.260069] Booting processor 2 APIC 0x4 ip 0x6000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.270293] Initializing CPU#2 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347666] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347667] CPU: Processor Core ID: 2 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347669] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347670] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347670] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347672] CPU 2/0x4 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347681] CPU2: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347683] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347756] CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.347762] checking TSC synchronization [CPU#0 -> CPU#2]: passed. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.367765] Booting processor 3 APIC 0x6 ip 0x6000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.377989] Initializing CPU#3 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455373] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455374] CPU: Processor Core ID: 3 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455376] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455377] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455377] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455379] CPU 3/0x6 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455388] CPU3: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455390] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455453] CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.455459] checking TSC synchronization [CPU#0 -> CPU#3]: passed. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.475463] Booting processor 4 APIC 0x1 ip 0x6000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.485688] Initializing CPU#4 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563080] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563081] CPU: Processor Core ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563083] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563085] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563086] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563088] CPU 4/0x1 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563097] CPU4: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563099] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563159] CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.563165] checking TSC synchronization [CPU#0 -> CPU#4]: passed. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.583174] Booting processor 5 APIC 0x3 ip 0x6000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.593398] Initializing CPU#5 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670787] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670788] CPU: Processor Core ID: 1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670790] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670791] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670791] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670793] CPU 5/0x3 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670801] CPU5: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670803] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670862] CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.670868] checking TSC synchronization [CPU#0 -> CPU#5]: passed. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.690873] Booting processor 6 APIC 0x5 ip 0x6000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.701097] Initializing CPU#6 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778494] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778495] CPU: Processor Core ID: 2 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778497] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778498] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778499] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778500] CPU 6/0x5 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778508] CPU6: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778511] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778561] CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.778567] checking TSC synchronization [CPU#0 -> CPU#6]: passed. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.798576] Booting processor 7 APIC 0x7 ip 0x6000 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.808800] Initializing CPU#7 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886201] CPU: Physical Processor ID: 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886202] CPU: Processor Core ID: 3 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886204] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886205] CPU: L2 cache: 256K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886206] CPU: L3 cache: 8192K May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886207] CPU 7/0x7 -> Node 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886216] CPU7: Thermal monitoring enabled (TM1) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886218] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886268] CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.886273] checking TSC synchronization [CPU#0 -> CPU#7]: passed. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.906235] Brought up 8 CPUs May 15 11:52:14 CRiSPY-V2 kernel: [ 0.906237] Total of 8 processors activated (44766.15 BogoMIPS). May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909084] CPU0 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909086] domain 0: span 0,4 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909088] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909091] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909093] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909100] CPU1 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909101] domain 0: span 1,5 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909102] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909105] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909106] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909112] CPU2 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909113] domain 0: span 2,6 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909114] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909117] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909119] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909124] CPU3 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909125] domain 0: span 3,7 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909127] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909130] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909131] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909136] CPU4 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909138] domain 0: span 0,4 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909139] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909142] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909143] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909149] CPU5 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909150] domain 0: span 1,5 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909151] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909154] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909155] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909161] CPU6 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909162] domain 0: span 2,6 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909163] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909166] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909167] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909173] CPU7 attaching sched-domain: May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909174] domain 0: span 3,7 level SIBLING May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909175] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909178] domain 1: span 0-7 level MC May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909180] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.909465] devtmpfs: initialized May 15 11:52:14 CRiSPY-V2 kernel: [ 0.912459] regulator: core version 0.5 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.912492] NET: Registered protocol family 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.912549] ACPI: bus type pci registered May 15 11:52:14 CRiSPY-V2 kernel: [ 0.912594] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.912596] PCI: MCFG area at f4000000 reserved in E820 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.913727] PCI: Using MMCONFIG at f4000000 - f7ffffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.913728] PCI: Using configuration type 1 for base access May 15 11:52:14 CRiSPY-V2 kernel: [ 0.914070] bio: create slab <bio-0> at 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.914515] ACPI: EC: Look up EC in DSDT May 15 11:52:14 CRiSPY-V2 kernel: [ 0.918347] ACPI: Interpreter enabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.918349] ACPI: (supports S0 S3 S4 S5) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.918363] ACPI: Using IOAPIC for interrupt routing May 15 11:52:14 CRiSPY-V2 kernel: [ 0.921556] ACPI: No dock devices found. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.921625] ACPI: PCI Root Bridge [PCI0] (0000:00) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.921716] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.921718] pci 0000:00:03.0: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.921946] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922004] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922062] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922127] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbfff000-0xfbfff3ff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922173] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922176] pci 0000:00:1a.7: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922211] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922245] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922248] pci 0000:00:1b.0: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922302] pci 0000:00:1c.0: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922357] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922360] pci 0000:00:1c.4: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922412] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922415] pci 0000:00:1c.5: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922460] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922518] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922575] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922633] pci 0000:00:1d.3: reg 20 io port: [0xf900-0xf91f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922693] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbffe000-0xfbffe3ff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922739] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922743] pci 0000:00:1d.7: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922890] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922894] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922899] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922903] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922907] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf40f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922912] pci 0000:00:1f.2: reg 24 io port: [0xf300-0xf30f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922950] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbffd000-0xfbffd0ff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922961] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.922997] pci 0000:00:1f.5: reg 10 io port: [0xf100-0xf107] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923001] pci 0000:00:1f.5: reg 14 io port: [0xf000-0xf003] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923005] pci 0000:00:1f.5: reg 18 io port: [0xef00-0xef07] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923010] pci 0000:00:1f.5: reg 1c io port: [0xee00-0xee03] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923014] pci 0000:00:1f.5: reg 20 io port: [0xed00-0xed0f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923018] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923065] pci 0000:01:00.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923072] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923079] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xee000000-0xefffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923083] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923087] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.923133] pci 0000:01:00.1: reg 10 32bit mmio: [0xfaffc000-0xfaffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930129] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930131] pci 0000:00:03.0: bridge 32bit mmio: [0xf9000000-0xfaffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930135] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930251] pci 0000:03:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930286] pci 0000:03:00.0: PME# supported from D3hot May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930291] pci 0000:03:00.0: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930339] pci 0000:03:00.1: reg 10 io port: [0xbf00-0xbf07] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930347] pci 0000:03:00.1: reg 14 io port: [0xbe00-0xbe03] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930355] pci 0000:03:00.1: reg 18 io port: [0xbd00-0xbd07] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930362] pci 0000:03:00.1: reg 1c io port: [0xbc00-0xbc03] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930370] pci 0000:03:00.1: reg 20 io port: [0xbb00-0xbb0f] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930433] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930494] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930497] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930540] pci 0000:04:00.0: reg 10 io port: [0xde00-0xdeff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930558] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xfbeff000-0xfbefffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930570] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfbef8000-0xfbefbfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930577] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930613] pci 0000:04:00.0: supports D1 D2 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930614] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold May 15 11:52:14 CRiSPY-V2 kernel: [ 0.930618] pci 0000:04:00.0: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938124] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938127] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938132] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfbe00000-0xfbefffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938169] pci 0000:05:07.0: reg 10 32bit mmio: [0xfbcff000-0xfbcff7ff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938175] pci 0000:05:07.0: reg 14 32bit mmio: [0xfbcf8000-0xfbcfbfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938212] pci 0000:05:07.0: supports D1 D2 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938214] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938217] pci 0000:05:07.0: PME# disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938253] pci 0000:00:1e.0: transparent bridge May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938257] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.938574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.956546] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.956615] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.956683] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.956751] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.956819] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. May 15 11:52:14 CRiSPY-V2 kernel: [ 0.956887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.956955] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957022] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957086] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957089] vgaarb: loaded May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957127] PCI: Using ACPI for IRQ routing May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957261] alloc irq_desc for 24 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957262] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957267] alloc irq_desc for 25 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957268] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957271] alloc irq_desc for 26 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957272] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957275] alloc irq_desc for 27 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957276] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957279] alloc irq_desc for 28 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957280] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957282] HPET: 8 timers in total, 5 timers will be used for per-cpu timer May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957289] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.957293] hpet0: 8 comparators, 64-bit 14.318180 MHz counter May 15 11:52:14 CRiSPY-V2 kernel: [ 0.962004] hpet: hpet2 irq 24 for MSI May 15 11:52:14 CRiSPY-V2 kernel: [ 0.962126] hpet: hpet3 irq 25 for MSI May 15 11:52:14 CRiSPY-V2 kernel: [ 0.966108] hpet: hpet4 irq 26 for MSI May 15 11:52:14 CRiSPY-V2 kernel: [ 0.970088] hpet: hpet5 irq 27 for MSI May 15 11:52:14 CRiSPY-V2 kernel: [ 0.974073] hpet: hpet6 irq 28 for MSI May 15 11:52:14 CRiSPY-V2 kernel: [ 0.986027] Switching to clocksource tsc May 15 11:52:14 CRiSPY-V2 kernel: [ 0.986827] pnp: PnP ACPI init May 15 11:52:14 CRiSPY-V2 kernel: [ 0.986832] ACPI: bus type pnp registered May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988172] pnp: PnP ACPI: found 12 devices May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988174] ACPI: ACPI bus type pnp unregistered May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988179] system 00:01: ioport range 0x4d0-0x4d1 has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988181] system 00:01: ioport range 0x290-0x29f has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988183] system 00:01: ioport range 0x800-0x87f has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988185] system 00:01: ioport range 0x290-0x294 has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988186] system 00:01: ioport range 0x880-0x88f has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988190] system 00:08: ioport range 0x400-0x4cf has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988192] system 00:08: ioport range 0x4d2-0x4ff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988195] system 00:09: iomem range 0xf4000000-0xf7ffffff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988199] system 00:0a: iomem range 0xcd800-0xcffff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988201] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988202] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988204] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988206] system 00:0a: iomem range 0xcfbe0000-0xcfbfffff could not be reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988208] system 00:0a: iomem range 0x0-0x9ffff could not be reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988210] system 00:0a: iomem range 0x100000-0xcfbdffff could not be reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988212] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988214] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988216] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988217] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988219] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988221] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.988223] system 00:0a: iomem range 0xe0000-0xeffff has been reserved May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992885] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992888] pci 0000:00:03.0: IO window: 0xc000-0xcfff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992891] pci 0000:00:03.0: MEM window: 0xf9000000-0xfaffffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992893] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000efffffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992897] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992899] pci 0000:00:1c.0: IO window: 0x1000-0x1fff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992903] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992906] pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992910] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992912] pci 0000:00:1c.4: IO window: 0xb000-0xbfff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992916] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992919] pci 0000:00:1c.4: PREFETCH window: 0x000000f0400000-0x000000f05fffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992923] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992926] pci 0000:00:1c.5: IO window: 0xd000-0xdfff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992929] pci 0000:00:1c.5: MEM window: 0xfbb00000-0xfbbfffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992932] pci 0000:00:1c.5: PREFETCH window: 0x000000fbe00000-0x000000fbefffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992937] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992938] pci 0000:00:1e.0: IO window: disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992941] pci 0000:00:1e.0: MEM window: 0xfbc00000-0xfbcfffff May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992944] pci 0000:00:1e.0: PREFETCH window: disabled May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992952] alloc irq_desc for 16 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992953] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992957] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992960] pci 0000:00:03.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992965] pci 0000:00:1c.0: enabling device (0000 -> 0003) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992968] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992972] pci 0000:00:1c.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992977] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992980] pci 0000:00:1c.4: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992986] alloc irq_desc for 17 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992987] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992990] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992993] pci 0000:00:1c.5: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.992997] pci 0000:00:1e.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993000] pci_bus 0000:00: resource 0 io: [0x00-0xffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993002] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993003] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993005] pci_bus 0000:01: resource 1 mem: [0xf9000000-0xfaffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993006] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xefffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993008] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993010] pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf01fffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993011] pci_bus 0000:02: resource 2 pref mem [0xf0200000-0xf03fffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993013] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993014] pci_bus 0000:03: resource 1 mem: [0xfbd00000-0xfbdfffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993015] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993017] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993018] pci_bus 0000:04: resource 1 mem: [0xfbb00000-0xfbbfffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993020] pci_bus 0000:04: resource 2 pref mem [0xfbe00000-0xfbefffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993022] pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993023] pci_bus 0000:05: resource 3 io: [0x00-0xffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993024] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993041] NET: Registered protocol family 2 May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993137] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.993762] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.995859] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.996112] TCP: Hash tables configured (established 524288 bind 65536) May 15 11:52:14 CRiSPY-V2 kernel: [ 0.996114] TCP reno registered May 15 11:52:14 CRiSPY-V2 kernel: [ 0.996187] NET: Registered protocol family 1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.026035] pci 0000:01:00.0: Boot video device May 15 11:52:14 CRiSPY-V2 kernel: [ 1.026073] Unpacking initramfs... May 15 11:52:14 CRiSPY-V2 kernel: [ 1.183298] Freeing initrd memory: 9967k freed May 15 11:52:14 CRiSPY-V2 kernel: [ 1.184962] audit: initializing netlink socket (disabled) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.184970] type=2000 audit(1305478324.972:1): initialized May 15 11:52:14 CRiSPY-V2 kernel: [ 1.188438] HugeTLB registered 2 MB page size, pre-allocated 0 pages May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189309] VFS: Disk quotas dquot_6.5.2 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189340] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189388] msgmni has been set to 7922 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189560] alg: No test for stdrng (krng) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189605] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189607] io scheduler noop registered May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189608] io scheduler anticipatory registered May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189609] io scheduler deadline registered May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189629] io scheduler cfq registered (default) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189716] alloc irq_desc for 29 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189717] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189725] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189730] pcieport 0000:00:03.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189804] alloc irq_desc for 30 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189806] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189811] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189817] pcieport 0000:00:1c.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189896] alloc irq_desc for 31 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189897] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189902] pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189907] pcieport 0000:00:1c.4: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189987] alloc irq_desc for 32 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189988] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.189994] pcieport 0000:00:1c.5: irq 32 for MSI/MSI-X May 15 11:52:14 CRiSPY-V2 kernel: [ 1.190000] pcieport 0000:00:1c.5: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.190054] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support May 15 11:52:14 CRiSPY-V2 kernel: [ 1.190869] Linux agpgart interface v0.103 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.190893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled May 15 11:52:14 CRiSPY-V2 kernel: [ 1.191112] input: Macintosh mouse button emulation as /devices/virtual/input/input0 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.191145] PNP: No PS/2 controller found. Probing ports directly. May 15 11:52:14 CRiSPY-V2 kernel: [ 1.224945] Failed to disable AUX port, but continuing anyway... Is this a SiS? May 15 11:52:14 CRiSPY-V2 kernel: [ 1.224946] If AUX port is really absent please use the 'i8042.noaux' option. May 15 11:52:14 CRiSPY-V2 kernel: [ 1.448955] serio: i8042 KBD port at 0x60,0x64 irq 1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449008] mice: PS/2 mouse device common for all mice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449030] rtc_cmos 00:04: RTC can wake from S4 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449049] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449072] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449078] cpuidle: using governor ladder May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449079] cpuidle: using governor menu May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449082] No iBFT detected. May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449280] TCP cubic registered May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449345] NET: Registered protocol family 10 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449819] Mobile IPv6 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449820] NET: Registered protocol family 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449866] PM: Resume from disk failed. May 15 11:52:14 CRiSPY-V2 kernel: [ 1.449870] registered taskstats version 1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.450294] rtc_cmos 00:04: setting system clock to 2011-05-15 16:52:05 UTC (1305478325) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.450313] Initalizing network drop monitor service May 15 11:52:14 CRiSPY-V2 kernel: [ 1.450334] Freeing unused kernel memory: 592k freed May 15 11:52:14 CRiSPY-V2 kernel: [ 1.450412] Write protecting the kernel read-only data: 4236k May 15 11:52:14 CRiSPY-V2 kernel: [ 1.459008] <30>udev[116]: starting version 167 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.483808] usbcore: registered new interface driver usbfs May 15 11:52:14 CRiSPY-V2 kernel: [ 1.483827] usbcore: registered new interface driver hub May 15 11:52:14 CRiSPY-V2 kernel: [ 1.483870] usbcore: registered new device driver usb May 15 11:52:14 CRiSPY-V2 kernel: [ 1.491294] SCSI subsystem initialized May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493651] alloc irq_desc for 18 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493655] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493662] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493690] ehci_hcd 0000:00:1a.7: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493693] ehci_hcd 0000:00:1a.7: EHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493709] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.493743] ehci_hcd 0000:00:1a.7: debug port 2 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.497637] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported May 15 11:52:14 CRiSPY-V2 kernel: [ 1.497654] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.502597] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded May 15 11:52:14 CRiSPY-V2 kernel: [ 1.502611] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.502645] r8169 0000:04:00.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.502686] alloc irq_desc for 33 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.502688] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.502698] r8169 0000:04:00.0: irq 33 for MSI/MSI-X May 15 11:52:14 CRiSPY-V2 kernel: [ 1.503066] eth0: RTL8168d/8111d at 0xffffc90000638000, 00:24:1d:d1:2a:75, XID 083000c0 IRQ 33 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.508955] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.508962] eth0: unable to apply firmware patch May 15 11:52:14 CRiSPY-V2 kernel: [ 1.508971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.508973] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.508975] usb usb1: Product: EHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.508977] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.508978] usb usb1: SerialNumber: 0000:00:1a.7 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509030] usb usb1: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509052] hub 1-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509057] hub 1-0:1.0: 6 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509106] alloc irq_desc for 23 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509107] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509112] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509127] ehci_hcd 0000:00:1d.7: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509130] ehci_hcd 0000:00:1d.7: EHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509136] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.509160] ehci_hcd 0000:00:1d.7: debug port 2 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.513040] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported May 15 11:52:14 CRiSPY-V2 kernel: [ 1.513051] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.514679] libata version 3.00 loaded. May 15 11:52:14 CRiSPY-V2 kernel: [ 1.516938] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.516944] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.516967] pata_jmicron 0000:03:00.1: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.517022] scsi0 : pata_jmicron May 15 11:52:14 CRiSPY-V2 kernel: [ 1.517088] scsi1 : pata_jmicron May 15 11:52:14 CRiSPY-V2 kernel: [ 1.517768] ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.517771] ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.520420] Floppy drive(s): fd0 is 1.44M May 15 11:52:14 CRiSPY-V2 kernel: [ 1.522138] uhci_hcd: USB Universal Host Controller Interface driver May 15 11:52:14 CRiSPY-V2 kernel: [ 1.524041] ahci 0000:03:00.0: version 3.0 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.524053] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528897] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528907] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528909] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528910] usb usb2: Product: EHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528912] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528913] usb usb2: SerialNumber: 0000:00:1d.7 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528950] usb usb2: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528967] hub 2-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.528970] hub 2-0:1.0: 8 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529012] ata_piix 0000:00:1f.2: version 2.13 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529021] alloc irq_desc for 19 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529023] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529028] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529032] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529061] ata_piix 0000:00:1f.2: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529105] scsi2 : ata_piix May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529157] scsi3 : ata_piix May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529594] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529598] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529620] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529627] uhci_hcd 0000:00:1a.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529629] uhci_hcd 0000:00:1a.0: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529635] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529664] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529687] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529689] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529690] usb usb3: Product: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529691] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529693] usb usb3: SerialNumber: 0000:00:1a.0 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529730] usb usb3: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529746] hub 3-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529749] hub 3-0:1.0: 2 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529788] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529791] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529813] ata_piix 0000:00:1f.5: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529839] scsi4 : ata_piix May 15 11:52:14 CRiSPY-V2 kernel: [ 1.529881] scsi5 : ata_piix May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530251] ata5: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530254] ata6: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530280] alloc irq_desc for 21 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530282] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530287] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530292] uhci_hcd 0000:00:1a.1: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530294] uhci_hcd 0000:00:1a.1: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530300] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530326] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530346] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530349] usb usb4: Product: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530350] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530351] usb usb4: SerialNumber: 0000:00:1a.1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530385] usb usb4: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530404] hub 4-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530407] hub 4-0:1.0: 2 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530436] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530441] uhci_hcd 0000:00:1a.2: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530443] uhci_hcd 0000:00:1a.2: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530447] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530466] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530486] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530488] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530489] usb usb5: Product: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530490] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530491] usb usb5: SerialNumber: 0000:00:1a.2 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530524] usb usb5: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530540] hub 5-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530543] hub 5-0:1.0: 2 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530573] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530577] uhci_hcd 0000:00:1d.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530579] uhci_hcd 0000:00:1d.0: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530583] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530622] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530624] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530625] usb usb6: Product: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530626] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530628] usb usb6: SerialNumber: 0000:00:1d.0 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530660] usb usb6: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530676] hub 6-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530679] hub 6-0:1.0: 2 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530708] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530713] uhci_hcd 0000:00:1d.1: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530715] uhci_hcd 0000:00:1d.1: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530719] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530738] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530758] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530760] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530761] usb usb7: Product: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530762] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530764] usb usb7: SerialNumber: 0000:00:1d.1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530796] usb usb7: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530813] hub 7-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530816] hub 7-0:1.0: 2 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530844] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530848] uhci_hcd 0000:00:1d.2: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530850] uhci_hcd 0000:00:1d.2: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530855] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530875] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530894] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530895] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530897] usb usb8: Product: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530898] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530899] usb usb8: SerialNumber: 0000:00:1d.2 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530932] usb usb8: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530948] hub 8-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530951] hub 8-0:1.0: 2 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530980] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530984] uhci_hcd 0000:00:1d.3: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530986] uhci_hcd 0000:00:1d.3: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.530990] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531009] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531028] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531030] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531031] usb usb9: Product: UHCI Host Controller May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531032] usb usb9: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531034] usb usb9: SerialNumber: 0000:00:1d.3 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531066] usb usb9: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531083] hub 9-0:1.0: USB hub found May 15 11:52:14 CRiSPY-V2 kernel: [ 1.531086] hub 9-0:1.0: 2 ports detected May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537412] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537414] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537420] ahci 0000:03:00.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537501] FDC 0 is a post-1991 82077 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537504] scsi6 : ahci May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537545] scsi7 : ahci May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537600] ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.537603] ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.680766] ata1.00: ATAPI: HP DVD Writer 1140r, FH24, max UDMA/66 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.696731] ata1.00: configured for UDMA/66 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.698734] scsi 0:0:0:0: CD-ROM HP DVD Writer 1140r FH24 PQ: 0 ANSI: 5 May 15 11:52:14 CRiSPY-V2 kernel: [ 1.855770] ata8: SATA link down (SStatus 0 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.858897] ata5: SATA link down (SStatus 0 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.858911] ata7: SATA link down (SStatus 0 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 1.869782] ata6: SATA link down (SStatus 0 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 2.023296] usb 6-2: new low speed USB device using uhci_hcd and address 2 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.178365] ata3.00: SATA link down (SStatus 0 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 2.178377] ata3.01: SATA link down (SStatus 0 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 2.210811] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a May 15 11:52:14 CRiSPY-V2 kernel: [ 2.210813] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.210815] usb 6-2: Product: HP Wireless Comfort Desktop May 15 11:52:14 CRiSPY-V2 kernel: [ 2.210816] usb 6-2: Manufacturer: HP May 15 11:52:14 CRiSPY-V2 kernel: [ 2.210853] usb 6-2: configuration #1 chosen from 1 choice May 15 11:52:14 CRiSPY-V2 kernel: [ 2.218616] usbcore: registered new interface driver hiddev May 15 11:52:14 CRiSPY-V2 kernel: [ 2.232865] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.232889] generic-usb 0003:0461:4D5A.0001: input,hidraw0: USB HID v1.10 Keyboard [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input0 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.267813] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.267849] generic-usb 0003:0461:4D5A.0002: input,hidraw1: USB HID v1.10 Mouse [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input1 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.267861] usbcore: registered new interface driver usbhid May 15 11:52:14 CRiSPY-V2 kernel: [ 2.267863] usbhid: v2.6:USB HID core driver May 15 11:52:14 CRiSPY-V2 kernel: [ 2.322528] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 2.322538] ata4.01: SATA link down (SStatus 0 SControl 300) May 15 11:52:14 CRiSPY-V2 kernel: [ 2.362745] ata4.00: ATA-8: ST31000333AS, CC3H, max UDMA/133 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.362747] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) May 15 11:52:14 CRiSPY-V2 kernel: [ 2.425807] ata4.00: configured for UDMA/133 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.425869] scsi 3:0:0:0: Direct-Access ATA ST31000333AS CC3H PQ: 0 ANSI: 5 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.431030] firewire_ohci 0000:05:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.438759] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 15 11:52:14 CRiSPY-V2 kernel: [ 2.438761] Uniform CD-ROM driver Revision: 3.20 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.438813] sr 0:0:0:0: Attached scsi CD-ROM sr0 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.438882] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) May 15 11:52:14 CRiSPY-V2 kernel: [ 2.438934] sd 3:0:0:0: [sda] Write Protect is off May 15 11:52:14 CRiSPY-V2 kernel: [ 2.438937] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.438957] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 15 11:52:14 CRiSPY-V2 kernel: [ 2.439084] sda: May 15 11:52:14 CRiSPY-V2 kernel: [ 2.440957] sr 0:0:0:0: Attached scsi generic sg0 type 5 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.440991] sd 3:0:0:0: Attached scsi generic sg1 type 0 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.447901] sda1 sda2 < sda5 > May 15 11:52:14 CRiSPY-V2 kernel: [ 2.456638] sd 3:0:0:0: [sda] Attached SCSI disk May 15 11:52:14 CRiSPY-V2 kernel: [ 2.499737] firewire_ohci: Added fw-ohci device 0000:05:07.0, OHCI version 1.10 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.709347] device-mapper: uevent: version 1.0.3 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.709422] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com May 15 11:52:14 CRiSPY-V2 kernel: [ 2.798430] PM: Starting manual resume from disk May 15 11:52:14 CRiSPY-V2 kernel: [ 2.798433] PM: Resume from partition 254:1 May 15 11:52:14 CRiSPY-V2 kernel: [ 2.798433] PM: Checking hibernation image. May 15 11:52:14 CRiSPY-V2 kernel: [ 2.798976] PM: Error -22 checking image file May 15 11:52:14 CRiSPY-V2 kernel: [ 2.798977] PM: Resume from disk failed. May 15 11:52:14 CRiSPY-V2 kernel: [ 2.818590] kjournald starting. Commit interval 5 seconds May 15 11:52:14 CRiSPY-V2 kernel: [ 2.818593] EXT3-fs: mounted filesystem with ordered data mode. May 15 11:52:14 CRiSPY-V2 kernel: [ 2.996679] firewire_core: created device fw0: GUID 004d34440000241d, S400 May 15 11:52:14 CRiSPY-V2 kernel: [ 3.829280] <30>udev[451]: starting version 167 May 15 11:52:14 CRiSPY-V2 kernel: [ 4.401991] EXT3 FS on dm-0, internal journal May 15 11:52:14 CRiSPY-V2 kernel: [ 4.618463] loop: module loaded May 15 11:52:14 CRiSPY-V2 kernel: [ 5.335028] alloc irq_desc for 22 on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 5.335031] alloc kstat_irqs on node -1 May 15 11:52:14 CRiSPY-V2 kernel: [ 5.335036] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 May 15 11:52:14 CRiSPY-V2 kernel: [ 5.335096] HDA Intel 0000:00:1b.0: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 6.373158] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 May 15 11:52:14 CRiSPY-V2 kernel: [ 7.374426] hda-intel: Codec #3 probe error; disabling it... May 15 11:52:14 CRiSPY-V2 kernel: [ 7.449783] hda_codec: ALC889A: BIOS auto-probing. May 15 11:52:14 CRiSPY-V2 kernel: [ 7.451078] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 May 15 11:52:14 CRiSPY-V2 kernel: [ 7.454996] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:52:14 CRiSPY-V2 kernel: [ 7.454999] hda_intel: Disable MSI for Nvidia chipset May 15 11:52:14 CRiSPY-V2 kernel: [ 7.455026] HDA Intel 0000:01:00.1: setting latency timer to 64 May 15 11:52:14 CRiSPY-V2 kernel: [ 8.284514] Adding 7921656k swap on /dev/mapper/Debian-swap_1. Priority:-1 extents:1 across:7921656k May 15 11:52:14 CRiSPY-V2 kernel: [ 8.955190] kjournald starting. Commit interval 5 seconds May 15 11:52:14 CRiSPY-V2 kernel: [ 8.955684] EXT3 FS on dm-2, internal journal May 15 11:52:14 CRiSPY-V2 kernel: [ 8.955687] EXT3-fs: mounted filesystem with ordered data mode. May 15 11:52:14 CRiSPY-V2 kernel: [ 10.135063] RPC: Registered udp transport module. May 15 11:52:14 CRiSPY-V2 kernel: [ 10.135065] RPC: Registered tcp transport module. May 15 11:52:14 CRiSPY-V2 kernel: [ 10.135066] RPC: Registered tcp NFSv4.1 backchannel transport module. May 15 11:52:14 CRiSPY-V2 kernel: [ 10.165308] Slow work thread pool: Starting up May 15 11:52:14 CRiSPY-V2 kernel: [ 10.165337] Slow work thread pool: Ready May 15 11:52:14 CRiSPY-V2 kernel: [ 10.165366] FS-Cache: Loaded May 15 11:52:14 CRiSPY-V2 kernel: [ 10.181387] FS-Cache: Netfs 'nfs' registered for caching May 15 11:52:14 CRiSPY-V2 kernel: [ 10.196513] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). May 15 11:52:14 CRiSPY-V2 kernel: [ 10.347663] fuse init (API version 7.13) May 15 11:52:16 CRiSPY-V2 kernel: [ 12.705400] Monitor-Mwait will be used to enter C-1 state May 15 11:52:16 CRiSPY-V2 kernel: [ 12.705417] Monitor-Mwait will be used to enter C-2 state May 15 11:52:16 CRiSPY-V2 kernel: [ 12.705432] Monitor-Mwait will be used to enter C-3 state May 15 11:52:16 CRiSPY-V2 kernel: [ 12.705511] processor LNXCPU:00: registered as cooling_device0 May 15 11:52:16 CRiSPY-V2 kernel: [ 12.706199] processor LNXCPU:01: registered as cooling_device1 May 15 11:52:16 CRiSPY-V2 kernel: [ 12.706750] processor LNXCPU:02: registered as cooling_device2 May 15 11:52:16 CRiSPY-V2 kernel: [ 12.707261] processor LNXCPU:03: registered as cooling_device3 May 15 11:52:16 CRiSPY-V2 kernel: [ 12.707767] processor LNXCPU:04: registered as cooling_device4 May 15 11:52:16 CRiSPY-V2 kernel: [ 12.708291] processor LNXCPU:05: registered as cooling_device5 May 15 11:52:16 CRiSPY-V2 kernel: [ 12.708854] processor LNXCPU:06: registered as cooling_device6 May 15 11:52:16 CRiSPY-V2 kernel: [ 12.709329] processor LNXCPU:07: registered as cooling_device7 May 15 11:52:18 CRiSPY-V2 kernel: [ 14.557656] r8169: eth0: link up May 15 11:52:18 CRiSPY-V2 kernel: [ 14.557667] r8169: eth0: link up May 15 11:52:26 CRiSPY-V2 kernel: [ 22.199402] lp: driver loaded but no devices found May 15 11:52:26 CRiSPY-V2 kernel: [ 22.340758] Bluetooth: Core ver 2.15 May 15 11:52:26 CRiSPY-V2 kernel: [ 22.340970] NET: Registered protocol family 31 May 15 11:52:26 CRiSPY-V2 kernel: [ 22.340971] Bluetooth: HCI device and connection manager initialized May 15 11:52:26 CRiSPY-V2 kernel: [ 22.340973] Bluetooth: HCI socket layer initialized May 15 11:52:26 CRiSPY-V2 kernel: [ 22.370798] Bluetooth: L2CAP ver 2.14 May 15 11:52:26 CRiSPY-V2 kernel: [ 22.370802] Bluetooth: L2CAP socket layer initialized May 15 11:52:26 CRiSPY-V2 kernel: [ 22.385842] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory May 15 11:52:26 CRiSPY-V2 kernel: [ 22.397812] ppdev: user-space parallel port driver May 15 11:52:26 CRiSPY-V2 kernel: [ 22.398841] NFSD: starting 90-second grace period May 15 11:52:26 CRiSPY-V2 kernel: [ 22.419385] Bluetooth: RFCOMM TTY layer initialized May 15 11:52:26 CRiSPY-V2 kernel: [ 22.419393] Bluetooth: RFCOMM socket layer initialized May 15 11:52:26 CRiSPY-V2 kernel: [ 22.419397] Bluetooth: RFCOMM ver 1.11 May 15 11:52:26 CRiSPY-V2 kernel: [ 22.460306] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 May 15 11:52:26 CRiSPY-V2 kernel: [ 22.460310] Bluetooth: BNEP filters: protocol multicast May 15 11:52:27 CRiSPY-V2 kernel: [ 23.100734] Bluetooth: SCO (Voice Link) ver 0.6 May 15 11:52:27 CRiSPY-V2 kernel: [ 23.100738] Bluetooth: SCO socket layer initialized May 15 11:52:29 CRiSPY-V2 kernel: [ 25.356510] eth0: no IPv6 routers present May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711379] CPU0 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711385] CPU1 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711389] CPU2 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711392] CPU3 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711395] CPU4 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711398] CPU5 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711401] CPU6 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.711404] CPU7 attaching NULL sched-domain. May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791103] CPU0 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791109] domain 0: span 0,4 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791113] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791121] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791125] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791139] CPU1 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791142] domain 0: span 1,5 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791145] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791153] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791156] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791169] CPU2 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791172] domain 0: span 2,6 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791175] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791182] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791185] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791199] CPU3 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791201] domain 0: span 3,7 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791205] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791212] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791215] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791228] CPU4 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791231] domain 0: span 0,4 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791234] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791242] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791245] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791258] CPU5 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791261] domain 0: span 1,5 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791264] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791271] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791275] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791288] CPU6 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791291] domain 0: span 2,6 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791294] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791301] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791304] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791317] CPU7 attaching sched-domain: May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791320] domain 0: span 3,7 level SIBLING May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791323] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791331] domain 1: span 0-7 level MC May 15 11:56:24 CRiSPY-V2 kernel: [ 259.791334] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:56:32 CRiSPY-V2 kernel: [ 267.477490] usb 6-2: USB disconnect, address 2 May 15 11:56:33 CRiSPY-V2 kernel: [ 268.706041] usb 6-2: new low speed USB device using uhci_hcd and address 3 May 15 11:56:33 CRiSPY-V2 kernel: [ 268.885126] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a May 15 11:56:33 CRiSPY-V2 kernel: [ 268.885131] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 15 11:56:33 CRiSPY-V2 kernel: [ 268.885135] usb 6-2: Product: HP Wireless Comfort Desktop May 15 11:56:33 CRiSPY-V2 kernel: [ 268.885138] usb 6-2: Manufacturer: HP May 15 11:56:33 CRiSPY-V2 kernel: [ 268.885228] usb 6-2: configuration #1 chosen from 1 choice May 15 11:56:33 CRiSPY-V2 kernel: [ 268.903317] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4 May 15 11:56:33 CRiSPY-V2 kernel: [ 268.903407] generic-usb 0003:0461:4D5A.0003: input,hidraw0: USB HID v1.10 Keyboard [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input0 May 15 11:56:33 CRiSPY-V2 kernel: [ 268.937292] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5 May 15 11:56:33 CRiSPY-V2 kernel: [ 268.937410] generic-usb 0003:0461:4D5A.0004: input,hidraw1: USB HID v1.10 Mouse [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input1 May 15 11:57:02 CRiSPY-V2 kernel: [ 297.205119] end_request: I/O error, dev fd0, sector 0 May 15 11:57:14 CRiSPY-V2 kernel: [ 309.348481] end_request: I/O error, dev fd0, sector 0 May 15 11:57:33 CRiSPY-V2 kernel: [ 328.205359] mtrr: no MTRR for ef000000,e00000 found May 15 11:57:34 CRiSPY-V2 kernel: [ 329.200814] nfsd: last server has exited, flushing export cache May 15 11:57:34 CRiSPY-V2 kernel: [ 329.451694] mtrr: no MTRR for ef000000,e00000 found May 15 11:57:34 CRiSPY-V2 kernel: [ 329.905973] fuse exit May 15 11:57:37 CRiSPY-V2 kernel: Kernel logging (proc) stopped. May 15 11:58:28 CRiSPY-V2 kernel: imklog 5.8.0, log source = /proc/kmsg started. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Initializing cgroup subsys cpuset May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Initializing cgroup subsys cpu May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] KERNEL supported cpus: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Intel GenuineIntel May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] AMD AuthenticAMD May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Centaur CentaurHauls May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-provided physical RAM map: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfbe0000 (usable) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbe0000 - 00000000cfbe2000 (ACPI NVS) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbe2000 - 00000000cfbf0000 (ACPI data) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000cfbf0000 - 00000000cfc00000 (reserved) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMI 2.4 present. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] MTRR default type: uncachable May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] MTRR fixed ranges enabled: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 00000-9FFFF write-back May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] A0000-BFFFF uncachable May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] C0000-CCFFF write-protect May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] CD000-EFFFF uncachable May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] F0000-FFFFF write-through May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] MTRR variable ranges enabled: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 0 base 000000000 mask F00000000 write-back May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 3 base 100000000 mask FC0000000 write-back May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 4 base 130000000 mask FF0000000 uncachable May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 5 disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 6 disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 7 disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] last_pfn = 0xcfbe0 max_arch_pfn = 0x400000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] initial memory mapped : 0 - 20000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfbe0000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 0000000000 - 00cfa00000 page 2M May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 00cfa00000 - 00cfbe0000 page 4k May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] kernel direct mapping tables up to cfbe0000 @ 8000-e000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 0100000000 - 0130000000 page 2M May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] RAMDISK: 36c78000 - 37633c43 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: RSDP 00000000000f6f60 00014 (v00 GBT ) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: RSDT 00000000cfbe2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: FACP 00000000cfbe20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: DSDT 00000000cfbe2180 04B37 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: FACS 00000000cfbe0000 00040 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: HPET 00000000cfbe6e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: MCFG 00000000cfbe6e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: EUDS 00000000cfbe6ec0 00000 (v01 GBT 00000000 00000000) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: TAMG 00000000cfbe7390 00A32 (v01 GBT GBT B0 5455312E BG?? 53450101) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: APIC 00000000cfbe6d00 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: SSDT 00000000cfbe7dd0 0369C (v01 INTEL PPM RCM 80000001 INTL 20061109) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] No NUMA configuration found May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Faking a node at 0000000000000000-0000000130000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] NODE_DATA [000000000000d000 - 0000000000014fff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] bootmap [0000000000015000 - 000000000003afff] pages 26 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #3 [0036c78000 - 0037633c43] RAMDISK ==> [0036c78000 - 0037633c43] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #5 [000168b000 - 000168b0f6] BRK ==> [000168b000 - 000168b0f6] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] found SMP MP-table at [ffff8800000f55b0] f55b0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Zone PFN ranges: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Normal 0x00100000 -> 0x00130000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Movable zone start PFN for each node May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] early_node_map[3] active PFN ranges May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00000100 -> 0x000cfbe0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] 0: 0x00100000 -> 0x00130000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] On node 0 totalpages: 1047423 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 56 pages used for memmap May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 104 pages reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMA zone: 3839 pages, LIFO batch:0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] DMA32 zone: 832536 pages, LIFO batch:31 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Normal zone: 2688 pages used for memmap May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ0 used by override. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ2 used by override. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: IRQ9 used by override. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] nr_irqs_gsi: 24 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbe0000 - 00000000cfbe2000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbe2000 - 00000000cfbf0000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfbf0000 - 00000000cfc00000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfc00000 - 00000000f4000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Allocating PCI resources starting at cfc00000 (gap: cfc00000:24400000) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u262144 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030295 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Policy zone: Normal May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Debian-root ro quiet May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Initializing CPU#0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Checking aperture... May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] No AGP bridge found May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Placing 64MB software IO TLB between ffff8800055de000 - ffff8800095de000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] software IO TLB at phys 0x55de000 - 0x95de000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Memory: 4046276k/4980736k available (3080k kernel code, 791044k absent, 143416k reserved, 1891k data, 592k init) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Hierarchical RCU implementation. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:472 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Console: colour VGA+ 80x25 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] console [tty0] enabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] hpet clockevent registered May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000000] Fast TSC calibration using PIT May 15 11:58:28 CRiSPY-V2 kernel: [ 0.004000] Detected 2797.787 MHz processor. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.57 BogoMIPS (lpj=11191148) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000013] Security Framework initialized May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000016] SELinux: Disabled at boot. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000229] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.000891] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001168] Mount-cache hash table entries: 256 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001246] Initializing cgroup subsys ns May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001248] Initializing cgroup subsys cpuacct May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001251] Initializing cgroup subsys devices May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001253] Initializing cgroup subsys freezer May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001254] Initializing cgroup subsys net_cls May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001267] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001268] CPU: Processor Core ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001271] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001272] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001273] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001275] CPU 0/0x0 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001277] mce: CPU supports 9 MCE banks May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001285] CPU0: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001287] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001292] using mwait in idle threads. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001294] Performance Events: Nehalem/Corei7 events, Intel PMU driver. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001297] ... version: 3 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001298] ... bit width: 48 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001299] ... generic registers: 4 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001300] ... value mask: 0000ffffffffffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001301] ... max period: 000000007fffffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001302] ... fixed-purpose events: 3 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001303] ... event mask: 000000070000000f May 15 11:58:28 CRiSPY-V2 kernel: [ 0.001924] ACPI: Core revision 20090903 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.008742] Setting APIC routing to flat May 15 11:58:28 CRiSPY-V2 kernel: [ 0.009068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.048751] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.156683] Booting processor 1 APIC 0x2 ip 0x6000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.167113] Initializing CPU#1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244616] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244617] CPU: Processor Core ID: 1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244618] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244620] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244620] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244622] CPU 1/0x2 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244631] CPU1: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244633] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244711] CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.244717] checking TSC synchronization [CPU#0 -> CPU#1]: passed. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.264780] Booting processor 2 APIC 0x4 ip 0x6000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.275032] Initializing CPU#2 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352618] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352619] CPU: Processor Core ID: 2 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352621] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352622] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352623] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352625] CPU 2/0x4 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352633] CPU2: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352635] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352650] CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.352655] checking TSC synchronization [CPU#0 -> CPU#2]: passed. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.372715] Booting processor 3 APIC 0x6 ip 0x6000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.382967] Initializing CPU#3 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460620] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460621] CPU: Processor Core ID: 3 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460623] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460624] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460625] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460627] CPU 3/0x6 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460635] CPU3: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460637] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460742] CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.460748] checking TSC synchronization [CPU#0 -> CPU#3]: passed. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.480807] Booting processor 4 APIC 0x1 ip 0x6000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.491059] Initializing CPU#4 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568623] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568624] CPU: Processor Core ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568626] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568627] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568628] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568630] CPU 4/0x1 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568639] CPU4: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568642] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568742] CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.568748] checking TSC synchronization [CPU#0 -> CPU#4]: passed. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.588811] Booting processor 5 APIC 0x3 ip 0x6000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.599062] Initializing CPU#5 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676625] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676625] CPU: Processor Core ID: 1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676627] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676628] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676629] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676631] CPU 5/0x3 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676639] CPU5: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676641] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676646] CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.676651] checking TSC synchronization [CPU#0 -> CPU#5]: passed. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.696710] Booting processor 6 APIC 0x5 ip 0x6000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.706645] Initializing CPU#6 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784627] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784628] CPU: Processor Core ID: 2 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784629] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784631] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784631] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784633] CPU 6/0x5 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784641] CPU6: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784643] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784718] CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.784724] checking TSC synchronization [CPU#0 -> CPU#6]: passed. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.804787] Booting processor 7 APIC 0x7 ip 0x6000 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.815039] Initializing CPU#7 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892629] CPU: Physical Processor ID: 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892630] CPU: Processor Core ID: 3 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892632] CPU: L1 I cache: 32K, L1 D cache: 32K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892633] CPU: L2 cache: 256K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892634] CPU: L3 cache: 8192K May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892635] CPU 7/0x7 -> Node 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892644] CPU7: Thermal monitoring enabled (TM1) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892646] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892715] CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.892721] checking TSC synchronization [CPU#0 -> CPU#7]: passed. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.912738] Brought up 8 CPUs May 15 11:58:28 CRiSPY-V2 kernel: [ 0.912740] Total of 8 processors activated (44766.08 BogoMIPS). May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915589] CPU0 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915592] domain 0: span 0,4 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915593] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915597] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915598] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915605] CPU1 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915606] domain 0: span 1,5 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915607] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915611] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915612] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915617] CPU2 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915618] domain 0: span 2,6 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915620] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915623] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915624] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915630] CPU3 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915631] domain 0: span 3,7 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915632] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915635] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915636] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915642] CPU4 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915643] domain 0: span 0,4 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915644] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915647] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915648] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915654] CPU5 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915655] domain 0: span 1,5 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915656] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915659] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915661] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915666] CPU6 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915667] domain 0: span 2,6 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915668] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915671] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915673] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915678] CPU7 attaching sched-domain: May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915679] domain 0: span 3,7 level SIBLING May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915681] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915684] domain 1: span 0-7 level MC May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915685] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.915971] devtmpfs: initialized May 15 11:58:28 CRiSPY-V2 kernel: [ 0.918974] regulator: core version 0.5 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.919006] NET: Registered protocol family 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.919064] ACPI: bus type pci registered May 15 11:58:28 CRiSPY-V2 kernel: [ 0.919109] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.919111] PCI: MCFG area at f4000000 reserved in E820 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.920246] PCI: Using MMCONFIG at f4000000 - f7ffffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.920247] PCI: Using configuration type 1 for base access May 15 11:58:28 CRiSPY-V2 kernel: [ 0.920590] bio: create slab <bio-0> at 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.921035] ACPI: EC: Look up EC in DSDT May 15 11:58:28 CRiSPY-V2 kernel: [ 0.924874] ACPI: Interpreter enabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.924876] ACPI: (supports S0 S3 S4 S5) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.924890] ACPI: Using IOAPIC for interrupt routing May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928092] ACPI: No dock devices found. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928160] ACPI: PCI Root Bridge [PCI0] (0000:00) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928252] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928255] pci 0000:00:03.0: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928483] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928541] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928599] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928664] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbfff000-0xfbfff3ff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928714] pci 0000:00:1a.7: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928748] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928783] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928786] pci 0000:00:1b.0: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928841] pci 0000:00:1c.0: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928896] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928899] pci 0000:00:1c.4: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928952] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.928955] pci 0000:00:1c.5: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929001] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929059] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929117] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929175] pci 0000:00:1d.3: reg 20 io port: [0xf900-0xf91f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929236] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbffe000-0xfbffe3ff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929283] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929286] pci 0000:00:1d.7: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929434] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929439] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929443] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929447] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929452] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf40f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929456] pci 0000:00:1f.2: reg 24 io port: [0xf300-0xf30f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929495] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbffd000-0xfbffd0ff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929506] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929542] pci 0000:00:1f.5: reg 10 io port: [0xf100-0xf107] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929546] pci 0000:00:1f.5: reg 14 io port: [0xf000-0xf003] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929551] pci 0000:00:1f.5: reg 18 io port: [0xef00-0xef07] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929555] pci 0000:00:1f.5: reg 1c io port: [0xee00-0xee03] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929559] pci 0000:00:1f.5: reg 20 io port: [0xed00-0xed0f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929564] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929611] pci 0000:01:00.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929618] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929625] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xee000000-0xefffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929629] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929633] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.929679] pci 0000:01:00.1: reg 10 32bit mmio: [0xfaffc000-0xfaffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936677] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936680] pci 0000:00:03.0: bridge 32bit mmio: [0xf9000000-0xfaffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936683] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936800] pci 0000:03:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936836] pci 0000:03:00.0: PME# supported from D3hot May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936840] pci 0000:03:00.0: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936889] pci 0000:03:00.1: reg 10 io port: [0xbf00-0xbf07] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936897] pci 0000:03:00.1: reg 14 io port: [0xbe00-0xbe03] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936905] pci 0000:03:00.1: reg 18 io port: [0xbd00-0xbd07] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936912] pci 0000:03:00.1: reg 1c io port: [0xbc00-0xbc03] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936920] pci 0000:03:00.1: reg 20 io port: [0xbb00-0xbb0f] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.936983] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937045] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937047] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937091] pci 0000:04:00.0: reg 10 io port: [0xde00-0xdeff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937109] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xfbeff000-0xfbefffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937121] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfbef8000-0xfbefbfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937128] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937163] pci 0000:04:00.0: supports D1 D2 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937164] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold May 15 11:58:28 CRiSPY-V2 kernel: [ 0.937168] pci 0000:04:00.0: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944694] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944697] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944701] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfbe00000-0xfbefffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944739] pci 0000:05:07.0: reg 10 32bit mmio: [0xfbcff000-0xfbcff7ff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944744] pci 0000:05:07.0: reg 14 32bit mmio: [0xfbcf8000-0xfbcfbfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944783] pci 0000:05:07.0: supports D1 D2 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944784] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944788] pci 0000:05:07.0: PME# disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944823] pci 0000:00:1e.0: transparent bridge May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944828] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.944850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.945014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.945058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.945103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.945146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963161] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963231] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963299] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963435] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963503] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963571] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963639] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963703] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963706] vgaarb: loaded May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963744] PCI: Using ACPI for IRQ routing May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963878] alloc irq_desc for 24 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963880] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963885] alloc irq_desc for 25 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963886] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963889] alloc irq_desc for 26 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963890] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963893] alloc irq_desc for 27 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963894] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963897] alloc irq_desc for 28 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963898] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963900] HPET: 8 timers in total, 5 timers will be used for per-cpu timer May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963906] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.963910] hpet0: 8 comparators, 64-bit 14.318180 MHz counter May 15 11:58:28 CRiSPY-V2 kernel: [ 0.968639] hpet: hpet2 irq 24 for MSI May 15 11:58:28 CRiSPY-V2 kernel: [ 0.968759] hpet: hpet3 irq 25 for MSI May 15 11:58:28 CRiSPY-V2 kernel: [ 0.972696] hpet: hpet4 irq 26 for MSI May 15 11:58:28 CRiSPY-V2 kernel: [ 0.972786] hpet: hpet5 irq 27 for MSI May 15 11:58:28 CRiSPY-V2 kernel: [ 0.976780] hpet: hpet6 irq 28 for MSI May 15 11:58:28 CRiSPY-V2 kernel: [ 0.984748] Switching to clocksource tsc May 15 11:58:28 CRiSPY-V2 kernel: [ 0.985553] pnp: PnP ACPI init May 15 11:58:28 CRiSPY-V2 kernel: [ 0.985559] ACPI: bus type pnp registered May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986902] pnp: PnP ACPI: found 12 devices May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986903] ACPI: ACPI bus type pnp unregistered May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986908] system 00:01: ioport range 0x4d0-0x4d1 has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986910] system 00:01: ioport range 0x290-0x29f has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986912] system 00:01: ioport range 0x800-0x87f has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986914] system 00:01: ioport range 0x290-0x294 has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986916] system 00:01: ioport range 0x880-0x88f has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986920] system 00:08: ioport range 0x400-0x4cf has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986921] system 00:08: ioport range 0x4d2-0x4ff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986925] system 00:09: iomem range 0xf4000000-0xf7ffffff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986928] system 00:0a: iomem range 0xcd800-0xcffff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986930] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986932] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986933] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986935] system 00:0a: iomem range 0xcfbe0000-0xcfbfffff could not be reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986937] system 00:0a: iomem range 0x0-0x9ffff could not be reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986939] system 00:0a: iomem range 0x100000-0xcfbdffff could not be reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986941] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986943] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986945] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986947] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986949] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986950] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.986952] system 00:0a: iomem range 0xe0000-0xeffff has been reserved May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991628] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991630] pci 0000:00:03.0: IO window: 0xc000-0xcfff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991633] pci 0000:00:03.0: MEM window: 0xf9000000-0xfaffffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991636] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000efffffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991639] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991642] pci 0000:00:1c.0: IO window: 0x1000-0x1fff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991645] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991648] pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991653] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991655] pci 0000:00:1c.4: IO window: 0xb000-0xbfff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991658] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991661] pci 0000:00:1c.4: PREFETCH window: 0x000000f0400000-0x000000f05fffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991666] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991668] pci 0000:00:1c.5: IO window: 0xd000-0xdfff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991672] pci 0000:00:1c.5: MEM window: 0xfbb00000-0xfbbfffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991675] pci 0000:00:1c.5: PREFETCH window: 0x000000fbe00000-0x000000fbefffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991679] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991681] pci 0000:00:1e.0: IO window: disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991684] pci 0000:00:1e.0: MEM window: 0xfbc00000-0xfbcfffff May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991687] pci 0000:00:1e.0: PREFETCH window: disabled May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991695] alloc irq_desc for 16 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991696] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991700] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991703] pci 0000:00:03.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991708] pci 0000:00:1c.0: enabling device (0000 -> 0003) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991711] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991715] pci 0000:00:1c.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991721] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991723] pci 0000:00:1c.4: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991729] alloc irq_desc for 17 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991730] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991733] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991736] pci 0000:00:1c.5: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991741] pci 0000:00:1e.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991743] pci_bus 0000:00: resource 0 io: [0x00-0xffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991745] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991747] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991748] pci_bus 0000:01: resource 1 mem: [0xf9000000-0xfaffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991750] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xefffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991751] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991753] pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf01fffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991754] pci_bus 0000:02: resource 2 pref mem [0xf0200000-0xf03fffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991756] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991757] pci_bus 0000:03: resource 1 mem: [0xfbd00000-0xfbdfffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991759] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991760] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991762] pci_bus 0000:04: resource 1 mem: [0xfbb00000-0xfbbfffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991763] pci_bus 0000:04: resource 2 pref mem [0xfbe00000-0xfbefffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991765] pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991766] pci_bus 0000:05: resource 3 io: [0x00-0xffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991768] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991784] NET: Registered protocol family 2 May 15 11:58:28 CRiSPY-V2 kernel: [ 0.991880] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.992507] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.994610] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.994864] TCP: Hash tables configured (established 524288 bind 65536) May 15 11:58:28 CRiSPY-V2 kernel: [ 0.994866] TCP reno registered May 15 11:58:28 CRiSPY-V2 kernel: [ 0.994938] NET: Registered protocol family 1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.024867] pci 0000:01:00.0: Boot video device May 15 11:58:28 CRiSPY-V2 kernel: [ 1.024905] Unpacking initramfs... May 15 11:58:28 CRiSPY-V2 kernel: [ 1.182588] Freeing initrd memory: 9967k freed May 15 11:58:28 CRiSPY-V2 kernel: [ 1.184255] audit: initializing netlink socket (disabled) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.184263] type=2000 audit(1305478697.968:1): initialized May 15 11:58:28 CRiSPY-V2 kernel: [ 1.187741] HugeTLB registered 2 MB page size, pre-allocated 0 pages May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188614] VFS: Disk quotas dquot_6.5.2 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188645] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188693] msgmni has been set to 7922 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188867] alg: No test for stdrng (krng) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188904] io scheduler noop registered May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188905] io scheduler anticipatory registered May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188906] io scheduler deadline registered May 15 11:58:28 CRiSPY-V2 kernel: [ 1.188926] io scheduler cfq registered (default) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189013] alloc irq_desc for 29 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189014] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189022] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189027] pcieport 0000:00:03.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189102] alloc irq_desc for 30 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189103] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189108] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189114] pcieport 0000:00:1c.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189193] alloc irq_desc for 31 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189194] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189199] pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189205] pcieport 0000:00:1c.4: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189286] alloc irq_desc for 32 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189287] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189292] pcieport 0000:00:1c.5: irq 32 for MSI/MSI-X May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189298] pcieport 0000:00:1c.5: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.189353] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support May 15 11:58:28 CRiSPY-V2 kernel: [ 1.190167] Linux agpgart interface v0.103 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.190191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled May 15 11:58:28 CRiSPY-V2 kernel: [ 1.190411] input: Macintosh mouse button emulation as /devices/virtual/input/input0 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.190444] PNP: No PS/2 controller found. Probing ports directly. May 15 11:58:28 CRiSPY-V2 kernel: [ 1.224546] Failed to disable AUX port, but continuing anyway... Is this a SiS? May 15 11:58:28 CRiSPY-V2 kernel: [ 1.224548] If AUX port is really absent please use the 'i8042.noaux' option. May 15 11:58:28 CRiSPY-V2 kernel: [ 1.448940] serio: i8042 KBD port at 0x60,0x64 irq 1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.448993] mice: PS/2 mouse device common for all mice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449016] rtc_cmos 00:04: RTC can wake from S4 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449035] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449058] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449064] cpuidle: using governor ladder May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449065] cpuidle: using governor menu May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449068] No iBFT detected. May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449267] TCP cubic registered May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449332] NET: Registered protocol family 10 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449806] Mobile IPv6 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449808] NET: Registered protocol family 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449853] PM: Resume from disk failed. May 15 11:58:28 CRiSPY-V2 kernel: [ 1.449858] registered taskstats version 1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.450284] rtc_cmos 00:04: setting system clock to 2011-05-15 16:58:19 UTC (1305478699) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.450303] Initalizing network drop monitor service May 15 11:58:28 CRiSPY-V2 kernel: [ 1.450324] Freeing unused kernel memory: 592k freed May 15 11:58:28 CRiSPY-V2 kernel: [ 1.450401] Write protecting the kernel read-only data: 4236k May 15 11:58:28 CRiSPY-V2 kernel: [ 1.459032] <30>udev[116]: starting version 167 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.484923] usbcore: registered new interface driver usbfs May 15 11:58:28 CRiSPY-V2 kernel: [ 1.484943] usbcore: registered new interface driver hub May 15 11:58:28 CRiSPY-V2 kernel: [ 1.485019] usbcore: registered new device driver usb May 15 11:58:28 CRiSPY-V2 kernel: [ 1.487276] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded May 15 11:58:28 CRiSPY-V2 kernel: [ 1.487297] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.487343] r8169 0000:04:00.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.487385] alloc irq_desc for 33 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.487387] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.487400] r8169 0000:04:00.0: irq 33 for MSI/MSI-X May 15 11:58:28 CRiSPY-V2 kernel: [ 1.487892] eth0: RTL8168d/8111d at 0xffffc90000678000, 00:24:1d:d1:2a:75, XID 083000c0 IRQ 33 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489050] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489069] alloc irq_desc for 18 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489071] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489077] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489097] ehci_hcd 0000:00:1a.7: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489100] ehci_hcd 0000:00:1a.7: EHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489117] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.489150] ehci_hcd 0000:00:1a.7: debug port 2 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.493037] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported May 15 11:58:28 CRiSPY-V2 kernel: [ 1.493051] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.501372] eth0: unable to apply firmware patch May 15 11:58:28 CRiSPY-V2 kernel: [ 1.504884] SCSI subsystem initialized May 15 11:58:28 CRiSPY-V2 kernel: [ 1.505711] Floppy drive(s): fd0 is 1.44M May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508882] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508905] usb usb1: Product: EHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508907] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508909] usb usb1: SerialNumber: 0000:00:1a.7 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508970] usb usb1: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.508997] hub 1-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509003] hub 1-0:1.0: 6 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509056] alloc irq_desc for 23 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509058] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509063] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509083] ehci_hcd 0000:00:1d.7: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509086] ehci_hcd 0000:00:1d.7: EHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509094] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.509121] ehci_hcd 0000:00:1d.7: debug port 2 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.513027] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported May 15 11:58:28 CRiSPY-V2 kernel: [ 1.513038] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.522141] libata version 3.00 loaded. May 15 11:58:28 CRiSPY-V2 kernel: [ 1.524987] FDC 0 is a post-1991 82077 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.526514] firewire_ohci 0000:05:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528671] ahci 0000:03:00.0: version 3.0 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528685] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528848] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528860] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528862] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528863] usb usb2: Product: EHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528864] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528866] usb usb2: SerialNumber: 0000:00:1d.7 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528909] usb usb2: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528934] hub 2-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528939] hub 2-0:1.0: 8 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528987] ata_piix 0000:00:1f.2: version 2.13 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528997] alloc irq_desc for 19 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.528998] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529004] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529046] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529076] ata_piix 0000:00:1f.2: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529126] scsi0 : ata_piix May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529252] scsi1 : ata_piix May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529703] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529707] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529724] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529727] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529754] ata_piix 0000:00:1f.5: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529785] scsi2 : ata_piix May 15 11:58:28 CRiSPY-V2 kernel: [ 1.529825] scsi3 : ata_piix May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530024] uhci_hcd: USB Universal Host Controller Interface driver May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530191] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530194] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530211] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530217] uhci_hcd 0000:00:1a.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530220] uhci_hcd 0000:00:1a.0: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530228] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530257] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530282] usb usb3: Product: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530284] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530285] usb usb3: SerialNumber: 0000:00:1a.0 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530321] usb usb3: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530337] hub 3-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530340] hub 3-0:1.0: 2 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530370] alloc irq_desc for 21 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530372] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530375] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530380] uhci_hcd 0000:00:1a.1: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530382] uhci_hcd 0000:00:1a.1: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530386] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530411] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530432] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530433] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530435] usb usb4: Product: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530436] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530437] usb usb4: SerialNumber: 0000:00:1a.1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530470] usb usb4: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530486] hub 4-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530489] hub 4-0:1.0: 2 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530518] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530522] uhci_hcd 0000:00:1a.2: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530524] uhci_hcd 0000:00:1a.2: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530529] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530548] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530568] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530571] usb usb5: Product: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530572] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530573] usb usb5: SerialNumber: 0000:00:1a.2 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530605] usb usb5: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530622] hub 5-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530625] hub 5-0:1.0: 2 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530655] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530660] uhci_hcd 0000:00:1d.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530662] uhci_hcd 0000:00:1d.0: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530666] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530685] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530705] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530706] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530708] usb usb6: Product: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530709] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530710] usb usb6: SerialNumber: 0000:00:1d.0 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530743] usb usb6: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530758] hub 6-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530761] hub 6-0:1.0: 2 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530790] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530794] uhci_hcd 0000:00:1d.1: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530796] uhci_hcd 0000:00:1d.1: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530801] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530820] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530840] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530842] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530843] usb usb7: Product: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530844] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530845] usb usb7: SerialNumber: 0000:00:1d.1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530877] usb usb7: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530894] hub 7-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530897] hub 7-0:1.0: 2 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530925] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530930] uhci_hcd 0000:00:1d.2: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530933] uhci_hcd 0000:00:1d.2: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530937] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530956] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530975] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530977] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530978] usb usb8: Product: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530979] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.530981] usb usb8: SerialNumber: 0000:00:1d.2 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531014] usb usb8: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531029] hub 8-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531034] hub 8-0:1.0: 2 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531063] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531068] uhci_hcd 0000:00:1d.3: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531070] uhci_hcd 0000:00:1d.3: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531074] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531093] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531112] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531114] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531115] usb usb9: Product: UHCI Host Controller May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531116] usb usb9: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531117] usb usb9: SerialNumber: 0000:00:1d.3 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531151] usb usb9: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531166] hub 9-0:1.0: USB hub found May 15 11:58:28 CRiSPY-V2 kernel: [ 1.531170] hub 9-0:1.0: 2 ports detected May 15 11:58:28 CRiSPY-V2 kernel: [ 1.542115] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode May 15 11:58:28 CRiSPY-V2 kernel: [ 1.542118] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 15 11:58:28 CRiSPY-V2 kernel: [ 1.542123] ahci 0000:03:00.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.542204] scsi4 : ahci May 15 11:58:28 CRiSPY-V2 kernel: [ 1.542255] scsi5 : ahci May 15 11:58:28 CRiSPY-V2 kernel: [ 1.542321] ata5: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.542324] ata6: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.598588] firewire_ohci: Added fw-ohci device 0000:05:07.0, OHCI version 1.10 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.622839] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.622845] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.622868] pata_jmicron 0000:03:00.1: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.622914] scsi6 : pata_jmicron May 15 11:58:28 CRiSPY-V2 kernel: [ 1.622962] scsi7 : pata_jmicron May 15 11:58:28 CRiSPY-V2 kernel: [ 1.623516] ata7: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.623518] ata8: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.785383] ata7.00: ATAPI: HP DVD Writer 1140r, FH24, max UDMA/66 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.801392] ata7.00: configured for UDMA/66 May 15 11:58:28 CRiSPY-V2 kernel: [ 1.859516] ata3: SATA link down (SStatus 0 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.870168] ata4: SATA link down (SStatus 0 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.870198] ata5: SATA link down (SStatus 0 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 1.870204] ata6: SATA link down (SStatus 0 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 2.024847] usb 6-2: new low speed USB device using uhci_hcd and address 2 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.096872] firewire_core: created device fw0: GUID 004d34440000241d, S400 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.179582] ata1.00: SATA link down (SStatus 0 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 2.179594] ata1.01: SATA link down (SStatus 0 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 2.204757] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a May 15 11:58:28 CRiSPY-V2 kernel: [ 2.204759] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.204760] usb 6-2: Product: HP Wireless Comfort Desktop May 15 11:58:28 CRiSPY-V2 kernel: [ 2.204761] usb 6-2: Manufacturer: HP May 15 11:58:28 CRiSPY-V2 kernel: [ 2.204804] usb 6-2: configuration #1 chosen from 1 choice May 15 11:58:28 CRiSPY-V2 kernel: [ 2.212615] usbcore: registered new interface driver hiddev May 15 11:58:28 CRiSPY-V2 kernel: [ 2.226873] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.226899] generic-usb 0003:0461:4D5A.0001: input,hidraw0: USB HID v1.10 Keyboard [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input0 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.261915] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.261950] generic-usb 0003:0461:4D5A.0002: input,hidraw1: USB HID v1.10 Mouse [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input1 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.261960] usbcore: registered new interface driver usbhid May 15 11:58:28 CRiSPY-V2 kernel: [ 2.261962] usbhid: v2.6:USB HID core driver May 15 11:58:28 CRiSPY-V2 kernel: [ 2.324897] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 2.324907] ata2.01: SATA link down (SStatus 0 SControl 300) May 15 11:58:28 CRiSPY-V2 kernel: [ 2.360962] ata2.00: ATA-8: ST31000333AS, CC3H, max UDMA/133 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.360964] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) May 15 11:58:28 CRiSPY-V2 kernel: [ 2.420440] ata2.00: configured for UDMA/133 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.420513] scsi 1:0:0:0: Direct-Access ATA ST31000333AS CC3H PQ: 0 ANSI: 5 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.421764] scsi 6:0:0:0: CD-ROM HP DVD Writer 1140r FH24 PQ: 0 ANSI: 5 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.592736] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) May 15 11:58:28 CRiSPY-V2 kernel: [ 2.592786] sd 1:0:0:0: [sda] Write Protect is off May 15 11:58:28 CRiSPY-V2 kernel: [ 2.592788] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.592807] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 15 11:58:28 CRiSPY-V2 kernel: [ 2.592922] sda: sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 15 11:58:28 CRiSPY-V2 kernel: [ 2.600307] Uniform CD-ROM driver Revision: 3.20 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.600362] sr 6:0:0:0: Attached scsi CD-ROM sr0 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.606620] sda5 > May 15 11:58:28 CRiSPY-V2 kernel: [ 2.606794] sd 1:0:0:0: [sda] Attached SCSI disk May 15 11:58:28 CRiSPY-V2 kernel: [ 2.608926] sd 1:0:0:0: Attached scsi generic sg0 type 0 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.608944] sr 6:0:0:0: Attached scsi generic sg1 type 5 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.843730] device-mapper: uevent: version 1.0.3 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.843814] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com May 15 11:58:28 CRiSPY-V2 kernel: [ 2.974515] PM: Starting manual resume from disk May 15 11:58:28 CRiSPY-V2 kernel: [ 2.974518] PM: Resume from partition 254:1 May 15 11:58:28 CRiSPY-V2 kernel: [ 2.974518] PM: Checking hibernation image. May 15 11:58:28 CRiSPY-V2 kernel: [ 2.975159] PM: Error -22 checking image file May 15 11:58:28 CRiSPY-V2 kernel: [ 2.975161] PM: Resume from disk failed. May 15 11:58:28 CRiSPY-V2 kernel: [ 2.994725] kjournald starting. Commit interval 5 seconds May 15 11:58:28 CRiSPY-V2 kernel: [ 2.994729] EXT3-fs: mounted filesystem with ordered data mode. May 15 11:58:28 CRiSPY-V2 kernel: [ 3.983196] <30>udev[449]: starting version 167 May 15 11:58:28 CRiSPY-V2 kernel: [ 4.582465] EXT3 FS on dm-0, internal journal May 15 11:58:28 CRiSPY-V2 kernel: [ 4.791222] loop: module loaded May 15 11:58:28 CRiSPY-V2 kernel: [ 5.359951] alloc irq_desc for 22 on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 5.359953] alloc kstat_irqs on node -1 May 15 11:58:28 CRiSPY-V2 kernel: [ 5.359959] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 May 15 11:58:28 CRiSPY-V2 kernel: [ 5.360023] HDA Intel 0000:00:1b.0: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 6.393545] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 May 15 11:58:28 CRiSPY-V2 kernel: [ 7.397530] hda-intel: Codec #3 probe error; disabling it... May 15 11:58:28 CRiSPY-V2 kernel: [ 7.480372] hda_codec: ALC889A: BIOS auto-probing. May 15 11:58:28 CRiSPY-V2 kernel: [ 7.481662] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 May 15 11:58:28 CRiSPY-V2 kernel: [ 7.485661] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 May 15 11:58:28 CRiSPY-V2 kernel: [ 7.485663] hda_intel: Disable MSI for Nvidia chipset May 15 11:58:28 CRiSPY-V2 kernel: [ 7.485692] HDA Intel 0000:01:00.1: setting latency timer to 64 May 15 11:58:28 CRiSPY-V2 kernel: [ 8.317374] Adding 7921656k swap on /dev/mapper/Debian-swap_1. Priority:-1 extents:1 across:7921656k May 15 11:58:28 CRiSPY-V2 kernel: [ 9.006547] kjournald starting. Commit interval 5 seconds May 15 11:58:28 CRiSPY-V2 kernel: [ 9.007043] EXT3 FS on dm-2, internal journal May 15 11:58:28 CRiSPY-V2 kernel: [ 9.007046] EXT3-fs: mounted filesystem with ordered data mode. May 15 11:58:28 CRiSPY-V2 kernel: [ 10.239576] RPC: Registered udp transport module. May 15 11:58:28 CRiSPY-V2 kernel: [ 10.239578] RPC: Registered tcp transport module. May 15 11:58:28 CRiSPY-V2 kernel: [ 10.239579] RPC: Registered tcp NFSv4.1 backchannel transport module. May 15 11:58:28 CRiSPY-V2 kernel: [ 10.269960] Slow work thread pool: Starting up May 15 11:58:28 CRiSPY-V2 kernel: [ 10.269988] Slow work thread pool: Ready May 15 11:58:28 CRiSPY-V2 kernel: [ 10.270018] FS-Cache: Loaded May 15 11:58:28 CRiSPY-V2 kernel: [ 10.285973] FS-Cache: Netfs 'nfs' registered for caching May 15 11:58:28 CRiSPY-V2 kernel: [ 10.301212] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). May 15 11:58:28 CRiSPY-V2 kernel: [ 10.452793] fuse init (API version 7.13) May 15 11:58:30 CRiSPY-V2 kernel: [ 12.250742] Monitor-Mwait will be used to enter C-1 state May 15 11:58:30 CRiSPY-V2 kernel: [ 12.250759] Monitor-Mwait will be used to enter C-2 state May 15 11:58:30 CRiSPY-V2 kernel: [ 12.250774] Monitor-Mwait will be used to enter C-3 state May 15 11:58:30 CRiSPY-V2 kernel: [ 12.250858] processor LNXCPU:00: registered as cooling_device0 May 15 11:58:30 CRiSPY-V2 kernel: [ 12.251562] processor LNXCPU:01: registered as cooling_device1 May 15 11:58:30 CRiSPY-V2 kernel: [ 12.252098] processor LNXCPU:02: registered as cooling_device2 May 15 11:58:30 CRiSPY-V2 kernel: [ 12.252582] processor LNXCPU:03: registered as cooling_device3 May 15 11:58:30 CRiSPY-V2 kernel: [ 12.253064] processor LNXCPU:04: registered as cooling_device4 May 15 11:58:30 CRiSPY-V2 kernel: [ 12.253694] processor LNXCPU:05: registered as cooling_device5 May 15 11:58:30 CRiSPY-V2 kernel: [ 12.254360] processor LNXCPU:06: registered as cooling_device6 May 15 11:58:30 CRiSPY-V2 kernel: [ 12.254957] processor LNXCPU:07: registered as cooling_device7 May 15 11:58:32 CRiSPY-V2 kernel: [ 14.779754] r8169: eth0: link up May 15 11:58:32 CRiSPY-V2 kernel: [ 14.779765] r8169: eth0: link up May 15 11:58:40 CRiSPY-V2 kernel: [ 22.912310] Bluetooth: Core ver 2.15 May 15 11:58:40 CRiSPY-V2 kernel: [ 22.912581] NET: Registered protocol family 31 May 15 11:58:40 CRiSPY-V2 kernel: [ 22.912585] Bluetooth: HCI device and connection manager initialized May 15 11:58:40 CRiSPY-V2 kernel: [ 22.912588] Bluetooth: HCI socket layer initialized May 15 11:58:40 CRiSPY-V2 kernel: [ 22.930022] Bluetooth: L2CAP ver 2.14 May 15 11:58:40 CRiSPY-V2 kernel: [ 22.930024] Bluetooth: L2CAP socket layer initialized May 15 11:58:40 CRiSPY-V2 kernel: [ 22.947973] Bluetooth: RFCOMM TTY layer initialized May 15 11:58:40 CRiSPY-V2 kernel: [ 22.947980] Bluetooth: RFCOMM socket layer initialized May 15 11:58:40 CRiSPY-V2 kernel: [ 22.947984] Bluetooth: RFCOMM ver 1.11 May 15 11:58:41 CRiSPY-V2 kernel: [ 22.955495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 May 15 11:58:41 CRiSPY-V2 kernel: [ 22.955497] Bluetooth: BNEP filters: protocol multicast May 15 11:58:41 CRiSPY-V2 kernel: [ 23.099219] Bluetooth: SCO (Voice Link) ver 0.6 May 15 11:58:41 CRiSPY-V2 kernel: [ 23.099223] Bluetooth: SCO socket layer initialized May 15 11:58:42 CRiSPY-V2 kernel: [ 24.452487] lp: driver loaded but no devices found May 15 11:58:42 CRiSPY-V2 kernel: [ 24.465095] ppdev: user-space parallel port driver May 15 11:58:43 CRiSPY-V2 kernel: [ 25.589615] eth0: no IPv6 routers present May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674149] CPU0 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674156] CPU1 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674159] CPU2 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674162] CPU3 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674165] CPU4 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674168] CPU5 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674171] CPU6 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.674174] CPU7 attaching NULL sched-domain. May 15 11:58:44 CRiSPY-V2 kernel: [ 26.699821] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory May 15 11:58:44 CRiSPY-V2 kernel: [ 26.709772] NFSD: starting 90-second grace period May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757768] CPU0 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757774] domain 0: span 0,4 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757778] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757787] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757790] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757805] CPU1 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757808] domain 0: span 1,5 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757811] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757818] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757821] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757835] CPU2 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757838] domain 0: span 2,6 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757841] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757848] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757851] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757864] CPU3 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757867] domain 0: span 3,7 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757870] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757878] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757881] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757894] CPU4 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757897] domain 0: span 0,4 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757900] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757907] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757910] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757924] CPU5 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757927] domain 0: span 1,5 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757930] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757937] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757940] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757953] CPU6 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757956] domain 0: span 2,6 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757959] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757967] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757970] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757983] CPU7 attaching sched-domain: May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757986] domain 0: span 3,7 level SIBLING May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757989] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757996] domain 1: span 0-7 level MC May 15 11:58:44 CRiSPY-V2 kernel: [ 26.757999] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 15 11:58:46 CRiSPY-V2 kernel: [ 28.388995] usb 6-2: USB disconnect, address 2 May 15 11:58:48 CRiSPY-V2 kernel: [ 30.184938] usb 6-2: new low speed USB device using uhci_hcd and address 3 May 15 11:58:48 CRiSPY-V2 kernel: [ 30.368053] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a May 15 11:58:48 CRiSPY-V2 kernel: [ 30.368058] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 15 11:58:48 CRiSPY-V2 kernel: [ 30.368151] usb 6-2: configuration #1 chosen from 1 choice May 15 11:58:48 CRiSPY-V2 kernel: [ 30.372050] usb 6-2: can't set config #1, error -71 May 15 11:58:48 CRiSPY-V2 kernel: [ 30.616949] usb 6-2: USB disconnect, address 3 May 15 11:58:48 CRiSPY-V2 kernel: [ 30.856924] usb 6-2: new low speed USB device using uhci_hcd and address 4 May 15 11:58:49 CRiSPY-V2 kernel: [ 31.036101] usb 6-2: New USB device found, idVendor=0461, idProduct=4d5a May 15 11:58:49 CRiSPY-V2 kernel: [ 31.036106] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 15 11:58:49 CRiSPY-V2 kernel: [ 31.036110] usb 6-2: Product: HP Wireless Comfort Desktop May 15 11:58:49 CRiSPY-V2 kernel: [ 31.036113] usb 6-2: Manufacturer: HP May 15 11:58:49 CRiSPY-V2 kernel: [ 31.036201] usb 6-2: configuration #1 chosen from 1 choice May 15 11:58:49 CRiSPY-V2 kernel: [ 31.054342] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4 May 15 11:58:49 CRiSPY-V2 kernel: [ 31.054459] generic-usb 0003:0461:4D5A.0003: input,hidraw0: USB HID v1.10 Keyboard [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input0 May 15 11:58:49 CRiSPY-V2 kernel: [ 31.089406] input: HP HP Wireless Comfort Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5 May 15 11:58:49 CRiSPY-V2 kernel: [ 31.089575] generic-usb 0003:0461:4D5A.0004: input,hidraw1: USB HID v1.10 Mouse [HP HP Wireless Comfort Desktop] on usb-0000:00:1d.0-2/input1 May 15 11:59:13 CRiSPY-V2 kernel: [ 55.453519] end_request: I/O error, dev fd0, sector 0 May 15 11:59:25 CRiSPY-V2 kernel: [ 67.633592] end_request: I/O error, dev fd0, sector 0