Bug#626748: closed by Ben Hutchings <ben@decadent.org.uk> (Re: Bug#626748: linux-image-2.6.38-2-amd64: Some modules fail to load, unknown kstrtoull - no sound)
Interesting. I am using grub2 which is supposed to read the filesystem
structure. So it means it is getting very confused somehow. Thanks for
the explanation though, I will try to keep digging.
On Sat, May 14, 2011 at 8:45 PM, Debian Bug Tracking System
<owner@bugs.debian.org> wrote:
> This is an automatic notification regarding your Bug report
> which was filed against the linux-2.6 package:
>
> #626748: linux-image-2.6.38-2-amd64: Some modules fail to load, unknown kstrtoull - no sound
>
> It has been closed by Ben Hutchings <ben@decadent.org.uk>.
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Ben Hutchings <ben@decadent.org.uk> by
> replying to this email.
>
>
> --
> 626748: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=626748
> Debian Bug Tracking System
> Contact owner@bugs.debian.org with problems
>
>
> ---------- Forwarded message ----------
> From: Ben Hutchings <ben@decadent.org.uk>
> To: 626748-done@bugs.debian.org
> Date: Sun, 15 May 2011 01:40:15 +0100
> Subject: Re: Bug#626748: linux-image-2.6.38-2-amd64: Some modules fail to load, unknown kstrtoull - no sound
> On Sat, 2011-05-14 at 19:48 -0400, Rodrigo Chandia wrote:
>> Package: linux-2.6
>> Version: 2.6.38-5
>> Severity: normal
>>
>>
>> No sound due to failures loading kernel modules. Neither rebooting nor
>> reinstalling kernel packages seem to fix the issue.
> [...]
>
> You are actually booting the kernel from package version 2.6.38-3, not
> the newly installed 2.6.38-5. The modules depend on some functions that
> were added in 2.6.38-5.
>
> You may be using an old version of lilo, or some other boot loader that
> does not follow the current boot loader policy.
>
> Ben.
>
> --
> Ben Hutchings
> Once a job is fouled up, anything done to improve it makes it worse.
>
>
> ---------- Forwarded message ----------
> From: Rodrigo Chandia <rodrigo.chandia@gmail.com>
> To: Debian Bug Tracking System <submit@bugs.debian.org>
> Date: Sat, 14 May 2011 19:48:20 -0400
> Subject: linux-image-2.6.38-2-amd64: Some modules fail to load, unknown kstrtoull - no sound
> Package: linux-2.6
> Version: 2.6.38-5
> Severity: normal
>
>
> No sound due to failures loading kernel modules. Neither rebooting nor reinstalling kernel packages seem to fix the issue.
>
> -- Package-specific info:
> ** Version:
> Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
>
> ** Command line:
> BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/yuki-root ro quiet splash
>
> ** Not tainted
>
> ** Kernel log:
> [ 2.640678] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 2.640879] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
> [ 2.640885] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
> [ 2.645152] scsi0 : ahci
> [ 2.645391] scsi1 : ahci
> [ 2.645526] scsi2 : ahci
> [ 2.645661] scsi3 : ahci
> [ 2.645794] scsi4 : ahci
> [ 2.645928] scsi5 : ahci
> [ 2.646032] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
> [ 2.646037] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
> [ 2.646043] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
> [ 2.646049] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
> [ 2.646055] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22
> [ 2.646061] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22
> [ 2.692280] usb 3-1: new low speed USB device using ohci_hcd and address 2
> [ 2.870709] usb 3-1: New USB device found, idVendor=04d9, idProduct=2519
> [ 2.870715] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [ 2.870719] usb 3-1: Product: VISENTA V1
> [ 2.952434] input: VISENTA V1 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
> [ 2.952547] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:12.0-1/input0
> [ 2.967499] input: VISENTA V1 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
> [ 2.967647] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:12.0-1/input1
> [ 2.967676] usbcore: registered new interface driver usbhid
> [ 2.967679] usbhid: USB HID core driver
> [ 2.972287] ata2: SATA link down (SStatus 0 SControl 300)
> [ 2.972331] ata3: SATA link down (SStatus 0 SControl 300)
> [ 2.972375] ata6: SATA link down (SStatus 0 SControl 300)
> [ 2.972410] ata4: SATA link down (SStatus 0 SControl 300)
> [ 2.972472] ata5: SATA link down (SStatus 0 SControl 300)
> [ 3.016272] usb 4-3: new full speed USB device using ohci_hcd and address 2
> [ 3.144284] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3.145426] ata1.00: ATA-8: ADATA S596 Turbo, 100730, max UDMA/133
> [ 3.145431] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 3.146922] ata1.00: configured for UDMA/133
> [ 3.147176] scsi 0:0:0:0: Direct-Access ATA ADATA S596 Turbo 1007 PQ: 0 ANSI: 5
> [ 3.168203] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
> [ 3.168347] sd 0:0:0:0: [sda] Write Protect is off
> [ 3.168353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.168415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.169556] sda: sda1 sda2 < sda5 >
> [ 3.170151] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 3.190552] usb 4-3: New USB device found, idVendor=0a12, idProduct=0001
> [ 3.190559] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.190563] usb 4-3: Product: Bluetooth V2.0 Dongle
> [ 3.190567] usb 4-3: Manufacturer: Bluetooth v2.0
> [ 4.345791] device-mapper: uevent: version 1.0.3
> [ 4.346170] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
> [ 4.544394] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
> [ 4.856703] <30>udevd[405]: starting version 168
> [ 4.994013] rfkill: Unknown symbol kstrtoull (err 0)
> [ 5.005446] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 5.030618] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
> [ 5.030629] shpchp 0000:00:01.0: Cannot reserve MMIO region
> [ 5.031424] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 5.039741] ACPI: acpi_idle registered with cpuidle
> [ 5.039810] ACPI: processor limited to max C-state 1
> [ 5.169105] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
> [ 5.181817] input: PC Speaker as /devices/platform/pcspkr/input/input4
> [ 5.182640] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
> [ 5.191352] MCE: In-kernel MCE decoding enabled.
> [ 5.196828] psmouse: Unknown symbol kstrtoull (err 0)
> [ 5.209381] rfkill: Unknown symbol kstrtoull (err 0)
> [ 5.212741] rfkill: Unknown symbol kstrtoull (err 0)
> [ 5.217373] rfkill: Unknown symbol kstrtoull (err 0)
> [ 5.220067] edac_core: Unknown symbol kstrtoull (err 0)
> [ 5.220568] edac_core: Unknown symbol kstrtoll (err 0)
> [ 5.235256] rfkill: Unknown symbol kstrtoull (err 0)
> [ 5.338699] snd_hda_codec: Unknown symbol kstrtoull (err 0)
> [ 5.344132] snd_hda_codec: Unknown symbol kstrtoull (err 0)
> [ 5.353022] snd_hda_codec: Unknown symbol kstrtoull (err 0)
> [ 5.358674] snd_hda_codec: Unknown symbol kstrtoull (err 0)
> [ 5.841460] EXT4-fs (dm-0): re-mounted. Opts: (null)
> [ 5.862121] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro
> [ 5.935758] loop: module loaded
> [ 6.604188] Adding 1310716k swap on /dev/mapper/yuki-swap_1. Priority:-1 extents:1 across:1310716k
> [ 6.932391] sunrpc: Unknown symbol kstrtoull (err 0)
> [ 6.944078] sunrpc: Unknown symbol kstrtoull (err 0)
> [ 6.957731] sunrpc: Unknown symbol kstrtoull (err 0)
> [ 7.030252] fuse: Unknown symbol kstrtoull (err 0)
> [ 7.378429] r8169 0000:03:00.0: eth0: link down
> [ 7.378444] r8169 0000:03:00.0: eth0: link down
> [ 7.379096] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 7.524184] sunrpc: Unknown symbol kstrtoull (err 0)
> [ 7.553171] sunrpc: Unknown symbol kstrtoull (err 0)
> [ 7.582119] sunrpc: Unknown symbol kstrtoull (err 0)
> [ 7.981195] powernow_k8: Unknown symbol kstrtoull (err 0)
> [ 8.441069] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
> [ 8.569437] rfkill: Unknown symbol kstrtoull (err 0)
> [ 8.571356] rfkill: Unknown symbol kstrtoull (err 0)
> [ 8.613409] rfkill: Unknown symbol kstrtoull (err 0)
> [ 8.641311] rfkill: Unknown symbol kstrtoull (err 0)
> [ 8.677811] rfkill: Unknown symbol kstrtoull (err 0)
> [ 8.695157] rfkill: Unknown symbol kstrtoull (err 0)
> [ 8.741212] lp: driver loaded but no devices found
> [ 8.755216] ppdev: user-space parallel port driver
> [ 9.222824] r8169 0000:03:00.0: eth0: link up
> [ 9.223384] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 11.458445] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro,commit=0
> [ 19.424091] eth0: no IPv6 routers present
>
> ** Model information
> sys_vendor: To Be Filled By O.E.M.
> product_name: To Be Filled By O.E.M.
> product_version: To Be Filled By O.E.M.
> chassis_vendor: To Be Filled By O.E.M.
> chassis_version: To Be Filled By O.E.M.
> bios_vendor: American Megatrends Inc.
> bios_version: 080015
> board_vendor: ZOTAC
> board_name: RS780
> board_version:
>
> ** Loaded modules:
> Module Size Used by
> parport_pc 22191 0
> ppdev 12725 0
> lp 17190 0
> parport 31650 3 parport_pc,ppdev,lp
> mperf 12411 0
> cpufreq_userspace 12576 0
> cpufreq_conservative 13878 0
> cpufreq_stats 12713 0
> cpufreq_powersave 12454 0
> autofs4 27310 1
> binfmt_misc 12914 1
> uinput 17392 1
> exportfs 12591 0
> loop 22515 0
> snd_hwdep 13148 0
> snd_pcm 67327 0
> snd_seq 44678 0
> snd_timer 22658 2 snd_pcm,snd_seq
> snd_seq_device 13155 1 snd_seq
> joydev 17138 0
> pcspkr 12579 0
> serio_raw 12878 0
> k8temp 12531 0
> edac_mce_amd 17103 0
> snd 52280 5 snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
> i2c_piix4 12536 0
> soundcore 13014 1 snd
> snd_page_alloc 12969 1 snd_pcm
> processor 27431 0
> shpchp 31221 0
> thermal_sys 17939 1 processor
> evdev 17475 10
> pci_hotplug 26711 1 shpchp
> ext4 285166 1
> mbcache 12930 1 ext4
> jbd2 65157 1 ext4
> crc16 12343 1 ext4
> dm_mod 62467 6
> sd_mod 35501 2
> crc_t10dif 12348 1 sd_mod
> usbhid 39900 0
> hid 72616 1 usbhid
> radeon 717227 2
> ahci 25089 1
> ohci_hcd 26400 0
> libahci 22568 1 ahci
> libata 147240 2 ahci,libahci
> ttm 52155 1 radeon
> drm_kms_helper 26893 1 radeon
> scsi_mod 161457 2 sd_mod,libata
> drm 165567 4 radeon,ttm,drm_kms_helper
> i2c_algo_bit 12834 1 radeon
> ehci_hcd 39529 0
> usbcore 122908 4 usbhid,ohci_hcd,ehci_hcd
> i2c_core 23725 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit
> r8169 37209 0
> power_supply 13475 1 radeon
> mii 12634 1 r8169
> nls_base 12753 1 usbcore
> button 12994 0
>
> ** Network interface configuration:
>
> auto lo
> iface lo inet loopback
>
> allow-hotplug eth0
> iface eth0 inet dhcp
>
> ** Network status:
> *** IP interfaces and addresses:
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
> link/ether 00:01:2e:bc:78:b4 brd ff:ff:ff:ff:ff:ff
> inet 192.168.0.167/24 brd 192.168.0.255 scope global eth0
> inet6 fe80::201:2eff:febc:78b4/64 scope link
> valid_lft forever preferred_lft forever
>
> *** Device statistics:
> Inter-| Receive | Transmit
> face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
> lo: 1920 32 0 0 0 0 0 0 1920 32 0 0 0 0 0 0
> eth0: 323456873 216527 0 0 0 0 0 0 6685893 95943 0 0 0 0 0 0
>
> *** Protocol statistics:
> Ip:
> 156275 total packets received
> 2 with invalid addresses
> 0 forwarded
> 0 incoming packets discarded
> 156259 incoming packets delivered
> 95913 requests sent out
> Icmp:
> 11 ICMP messages received
> 0 input ICMP message failed.
> ICMP input histogram:
> destination unreachable: 8
> echo requests: 1
> echo replies: 2
> 11 ICMP messages sent
> 0 ICMP messages failed
> ICMP output histogram:
> destination unreachable: 8
> echo request: 2
> echo replies: 1
> IcmpMsg:
> InType0: 2
> InType3: 8
> InType8: 1
> OutType0: 1
> OutType3: 8
> OutType8: 2
> Tcp:
> 20 active connections openings
> 4 passive connection openings
> 2 failed connection attempts
> 0 connection resets received
> 1 connections established
> 156150 segments received
> 95835 segments send out
> 0 segments retransmited
> 0 bad segments received.
> 2 resets sent
> Udp:
> 64 packets received
> 8 packets to unknown port received.
> 0 packet receive errors
> 67 packets sent
> UdpLite:
> TcpExt:
> 8 TCP sockets finished time wait in fast timer
> 21 delayed acks sent
> 2 packets directly queued to recvmsg prequeue.
> 147745 packet headers predicted
> 173 acknowledgments not containing data payload received
> 1790 predicted acknowledgments
> IpExt:
> InMcastPkts: 16
> OutMcastPkts: 13
> InBcastPkts: 28
> InOctets: 317296433
> OutOctets: 5339030
> InMcastOctets: 3725
> OutMcastOctets: 3281
> InBcastOctets: 6511
>
> *** Device features:
> eth0: 0x4180
> lo: 0x13865
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
> Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
>
> 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fe800000-fe9fffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> Memory behind bridge: fea00000-feafffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: feb00000-febfffff
> Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
> Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: I/O ports at c000 [size=8]
> Region 1: I/O ports at b000 [size=4]
> Region 2: I/O ports at a000 [size=8]
> Region 3: I/O ports at 9000 [size=4]
> Region 4: I/O ports at 8000 [size=16]
> Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
>
> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
> Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
> Subsystem: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
> Subsystem: ATI Technologies Inc Device [1002:4397]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
>
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
> Subsystem: ATI Technologies Inc Device [1002:4398]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
> Subsystem: ATI Technologies Inc Device [1002:4399]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
> Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 19
> Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
>
> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
> Subsystem: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel driver in use: piix4_smbus
>
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
> Subsystem: ATI Technologies Inc Device [1002:4384]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 14
> Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
> Subsystem: ATI Technologies Inc Device [1002:4383]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
> Subsystem: ATI Technologies Inc Device [1002:4396]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fe7f6000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel driver in use: k8temp
>
> 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller])
> Subsystem: ATI Technologies Inc Device [1002:0000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Region 1: I/O ports at d000 [size=256]
> Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
> Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: <access denied>
> Kernel driver in use: radeon
>
> 01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f]
> Subsystem: ATI Technologies Inc RS780 Azalia controller [1002:960f]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 7
> Region 0: Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
> Subsystem: AzureWave Device [1a3b:1089]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
>
> 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
> Subsystem: ZOTAC International (MCO) Ltd. Device [19da:8168]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 42
> Region 0: I/O ports at e800 [size=256]
> Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
> Expansion ROM at febe0000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
>
>
> ** USB devices:
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 002: ID 04d9:2519 Holtek Semiconductor, Inc.
> Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
>
>
> -- System Information:
> Debian Release: wheezy/sid
> APT prefers unstable
> APT policy: (500, 'unstable')
> Architecture: amd64 (x86_64)
>
> Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
> Versions of packages linux-image-2.6.38-2-amd64 depends on:
> ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
> ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
> ii linux-base 3.2 Linux image base package
> ii module-init-tools 3.12-1 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.38-2-amd64 recommends:
> ii firmware-linux-free 3 Binary firmware for various driver
>
> Versions of packages linux-image-2.6.38-2-amd64 suggests:
> ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
> pn linux-doc-2.6.38 <none> (no description available)
>
> Versions of packages linux-image-2.6.38-2-amd64 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> pn firmware-iwlwifi <none> (no description available)
> ii firmware-linux 0.29 Binary firmware for various driver
> ii firmware-linux-nonfree 0.29 Binary firmware for various driver
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
> pn xen-hypervisor <none> (no description available)
>
> -- debconf information:
> linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
> linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
> linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
> linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
>
>
>
>
Reply to: