Bug#626748: linux-image-2.6.38-2-amd64: Some modules fail to load, unknown kstrtoull - no sound
Package: linux-2.6
Version: 2.6.38-5
Severity: normal
No sound due to failures loading kernel modules. Neither rebooting nor reinstalling kernel packages seem to fix the issue.
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/yuki-root ro quiet splash
** Not tainted
** Kernel log:
[ 2.640678] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.640879] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.640885] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.645152] scsi0 : ahci
[ 2.645391] scsi1 : ahci
[ 2.645526] scsi2 : ahci
[ 2.645661] scsi3 : ahci
[ 2.645794] scsi4 : ahci
[ 2.645928] scsi5 : ahci
[ 2.646032] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
[ 2.646037] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
[ 2.646043] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
[ 2.646049] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
[ 2.646055] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22
[ 2.646061] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22
[ 2.692280] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 2.870709] usb 3-1: New USB device found, idVendor=04d9, idProduct=2519
[ 2.870715] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.870719] usb 3-1: Product: VISENTA V1
[ 2.952434] input: VISENTA V1 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
[ 2.952547] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:12.0-1/input0
[ 2.967499] input: VISENTA V1 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
[ 2.967647] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:12.0-1/input1
[ 2.967676] usbcore: registered new interface driver usbhid
[ 2.967679] usbhid: USB HID core driver
[ 2.972287] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.972331] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.972375] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.972410] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.972472] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.016272] usb 4-3: new full speed USB device using ohci_hcd and address 2
[ 3.144284] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.145426] ata1.00: ATA-8: ADATA S596 Turbo, 100730, max UDMA/133
[ 3.145431] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.146922] ata1.00: configured for UDMA/133
[ 3.147176] scsi 0:0:0:0: Direct-Access ATA ADATA S596 Turbo 1007 PQ: 0 ANSI: 5
[ 3.168203] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.168347] sd 0:0:0:0: [sda] Write Protect is off
[ 3.168353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.168415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.169556] sda: sda1 sda2 < sda5 >
[ 3.170151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.190552] usb 4-3: New USB device found, idVendor=0a12, idProduct=0001
[ 3.190559] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.190563] usb 4-3: Product: Bluetooth V2.0 Dongle
[ 3.190567] usb 4-3: Manufacturer: Bluetooth v2.0
[ 4.345791] device-mapper: uevent: version 1.0.3
[ 4.346170] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 4.544394] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.856703] <30>udevd[405]: starting version 168
[ 4.994013] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.005446] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.030618] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
[ 5.030629] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 5.031424] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.039741] ACPI: acpi_idle registered with cpuidle
[ 5.039810] ACPI: processor limited to max C-state 1
[ 5.169105] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.181817] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.182640] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.191352] MCE: In-kernel MCE decoding enabled.
[ 5.196828] psmouse: Unknown symbol kstrtoull (err 0)
[ 5.209381] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.212741] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.217373] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.220067] edac_core: Unknown symbol kstrtoull (err 0)
[ 5.220568] edac_core: Unknown symbol kstrtoll (err 0)
[ 5.235256] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.338699] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.344132] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.353022] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.358674] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.841460] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.862121] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro
[ 5.935758] loop: module loaded
[ 6.604188] Adding 1310716k swap on /dev/mapper/yuki-swap_1. Priority:-1 extents:1 across:1310716k
[ 6.932391] sunrpc: Unknown symbol kstrtoull (err 0)
[ 6.944078] sunrpc: Unknown symbol kstrtoull (err 0)
[ 6.957731] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.030252] fuse: Unknown symbol kstrtoull (err 0)
[ 7.378429] r8169 0000:03:00.0: eth0: link down
[ 7.378444] r8169 0000:03:00.0: eth0: link down
[ 7.379096] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.524184] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.553171] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.582119] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.981195] powernow_k8: Unknown symbol kstrtoull (err 0)
[ 8.441069] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[ 8.569437] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.571356] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.613409] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.641311] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.677811] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.695157] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.741212] lp: driver loaded but no devices found
[ 8.755216] ppdev: user-space parallel port driver
[ 9.222824] r8169 0000:03:00.0: eth0: link up
[ 9.223384] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.458445] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro,commit=0
[ 19.424091] eth0: no IPv6 routers present
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: ZOTAC
board_name: RS780
board_version:
** Loaded modules:
Module Size Used by
parport_pc 22191 0
ppdev 12725 0
lp 17190 0
parport 31650 3 parport_pc,ppdev,lp
mperf 12411 0
cpufreq_userspace 12576 0
cpufreq_conservative 13878 0
cpufreq_stats 12713 0
cpufreq_powersave 12454 0
autofs4 27310 1
binfmt_misc 12914 1
uinput 17392 1
exportfs 12591 0
loop 22515 0
snd_hwdep 13148 0
snd_pcm 67327 0
snd_seq 44678 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
joydev 17138 0
pcspkr 12579 0
serio_raw 12878 0
k8temp 12531 0
edac_mce_amd 17103 0
snd 52280 5 snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_piix4 12536 0
soundcore 13014 1 snd
snd_page_alloc 12969 1 snd_pcm
processor 27431 0
shpchp 31221 0
thermal_sys 17939 1 processor
evdev 17475 10
pci_hotplug 26711 1 shpchp
ext4 285166 1
mbcache 12930 1 ext4
jbd2 65157 1 ext4
crc16 12343 1 ext4
dm_mod 62467 6
sd_mod 35501 2
crc_t10dif 12348 1 sd_mod
usbhid 39900 0
hid 72616 1 usbhid
radeon 717227 2
ahci 25089 1
ohci_hcd 26400 0
libahci 22568 1 ahci
libata 147240 2 ahci,libahci
ttm 52155 1 radeon
drm_kms_helper 26893 1 radeon
scsi_mod 161457 2 sd_mod,libata
drm 165567 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 12834 1 radeon
ehci_hcd 39529 0
usbcore 122908 4 usbhid,ohci_hcd,ehci_hcd
i2c_core 23725 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit
r8169 37209 0
power_supply 13475 1 radeon
mii 12634 1 r8169
nls_base 12753 1 usbcore
button 12994 0
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:01:2e:bc:78:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.167/24 brd 192.168.0.255 scope global eth0
inet6 fe80::201:2eff:febc:78b4/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1920 32 0 0 0 0 0 0 1920 32 0 0 0 0 0 0
eth0: 323456873 216527 0 0 0 0 0 0 6685893 95943 0 0 0 0 0 0
*** Protocol statistics:
Ip:
156275 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
156259 incoming packets delivered
95913 requests sent out
Icmp:
11 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 8
echo requests: 1
echo replies: 2
11 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
echo request: 2
echo replies: 1
IcmpMsg:
InType0: 2
InType3: 8
InType8: 1
OutType0: 1
OutType3: 8
OutType8: 2
Tcp:
20 active connections openings
4 passive connection openings
2 failed connection attempts
0 connection resets received
1 connections established
156150 segments received
95835 segments send out
0 segments retransmited
0 bad segments received.
2 resets sent
Udp:
64 packets received
8 packets to unknown port received.
0 packet receive errors
67 packets sent
UdpLite:
TcpExt:
8 TCP sockets finished time wait in fast timer
21 delayed acks sent
2 packets directly queued to recvmsg prequeue.
147745 packet headers predicted
173 acknowledgments not containing data payload received
1790 predicted acknowledgments
IpExt:
InMcastPkts: 16
OutMcastPkts: 13
InBcastPkts: 28
InOctets: 317296433
OutOctets: 5339030
InMcastOctets: 3725
OutMcastOctets: 3281
InBcastOctets: 6511
*** Device features:
eth0: 0x4180
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc Device [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4398]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ATI Technologies Inc Device [1002:4384]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 14
Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: ATI Technologies Inc Device [1002:4383]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7f6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device [1002:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f]
Subsystem: ATI Technologies Inc RS780 Azalia controller [1002:960f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 7
Region 0: Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04d9:2519 Holtek Semiconductor, Inc.
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.29 Binary firmware for various driver
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
Reply to: